When giving a line number on the command line, do_gotolinecolumn() needs
to know the width of the screen to be able to (roughly) place the target
line in the center of the screen.
This fixes https://savannah.gnu.org/bugs/?49462.
It does not update anything -- it just picks a new point from
where to start displaying the buffer. All actual updating of
the screen is done by edit_refresh() and edit_redraw() and such.
It can be activated with --linenumbers on the command line or with
'set linenumbers' in a nanorc file, and it can be toggled with M-#.
Signed-off-by: Faissal Bensefia <faissaloo@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Returning a zero would mean returning a ^Space -- the keycode that
by default is bound to the Next-Word function. So, unbinding the
keys to which the modified Arrow keys are hard bound would cause
the latter ones to mysteriously jump to the next word.
This partially fixes https://savannah.gnu.org/bugs/?49058.
Add the keycodes and routines to allow the user to forego setting the
mark explicitly (with M-A / ^6) and instead quickly select a few words
or lines by holding down Shift together with the movement keys.
(Some combinations with Shift are swallowed by some terminal emulators.
To work around some of those, the combinations Shift+Alt+Left/Right work
as Shift+Home/End and Shift+Alt+Up/Down work as Shift+PageUp/PageDown.)
This also prevents the message from spilling into the help lines
when the terminal is less than four columns wide. (Not that one
can read anything then, but it looks better.)
Even when the edit window consists of just one or two lines, the PageUp
and PageDown functions (^Y and ^V) should continue to move the window.
This fixes https://savannah.gnu.org/bugs/?48805.
When using the default speller or the formatter, the placewewant is
remembered. So it should be remembered too when the user specifies
a different speller.
(This behavior was inadvertently lost last year, in commit 82d737e.)
It is quicker to do a handful of superfluous compares at the end of
each line than it is to compute and keep track of and compare the
remaining line length the whole time.
The typical line is some sixty characters long, the typical search
string ten characters -- with a shorter search string the speedup is
even higher: some fifteen percent. Only when the string is longer
than half the average line length does searching become slower with
this new method.
All this for a UTF-8 locale. For a C locale it makes no difference.
Now that mbstrncasecmp() does the right thing, there is no need any
more to verify that only a valid multibyte sequence was matched.
(See https://savannah.gnu.org/bugs/?45579 for a test case.)
Also, this will make it possible to search for invalid sequences.
(Currently it isn't possible to enter a search string with invalid
characters, but... a user might edit the search history file. And
if pasting at the prompt is implemented, it will be trivial to enter
invalid sequences if you have a file that contains them.)
Persisting might lead to count 'n' reaching zero, which would mean that
the needle has matched, which is wrong when one of the strings contains
an invalid or incomplete multibyte sequence.
That is: don't run towlower() on the two differing bytes when having
reached the end of one of the strings.
This fixes https://savannah.gnu.org/bugs/?48700.
In the bargain, don't do the conversion to lowercase twice.
Furthermore, persist when encountering invalid byte sequences --
until finding bytes that differ.
The needle is never part of the hay -- it is always a separate string.
(And even if needle and haystack were identical, the routine works fine,
the case does not need special treatment.)
When doing an <Up> on the top line, or a <Down> on the bottom line of
the edit window, the affected lines have already been redrawn by the
scrolling code, so there is no need to do that again.
(However, that does not prevent the second line (or the last-but-one
line) from being redrawn unnecessarily when using the M-- (or M-+)
command elsewhere on the screen and /that/ line is horizontally
scrolled. But we'll let that pass for now.)
For horizontal scrolling, it is not the /desired/ column position that
is relevant for determining whether a line needs to be redrawn after a
cursor movement, but the /actual/ column positions before and after.
This fixes https://savannah.gnu.org/bugs/?48627,
and fixes https://savannah.gnu.org/bugs/?48629.
Leave the rest of any escape sequence to be processed normally, which
should be possible because those characters are all in ASCII range.
This fixes https://savannah.gnu.org/bugs/?48318.
Also, when a key string does not denote a Ctrl nor Meta nor Function key,
there is no point in assigning a keycode, because plain characters cannot
be used as a function shortcut.
And hard-bind the keys Ctrl+Up and Ctrl+Down to these functions.
Unlike the paragraph-jumping code, these new functions disregard
any indentation, treating only blank lines as separators. They
also do an automatic smart home when that option is set.
This fulfills https://savannah.gnu.org/bugs/?48291.
Also, compose the coloring attributes during initialization
instead of every time when painting something.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Instead of referring to a window that might have been deleted by a
resize, just turn the keypad back on for the two windows from which
input might have been requested.
Also: don't insert KEY_WINCH as the verbatim keystroke.
This fixes https://savannah.gnu.org/bugs/?48532.
This allows the user to specify which other characters, besides the
default alphanumeric ones, should be considered as part of a word, so
that word operations like Ctrl+Left and Ctrl+Right will pass them by.
Using this option overrides the option --wordbounds.
This fulfills https://savannah.gnu.org/bugs/?47283.
When the user changes her mind after having pressed Esc, she cannot
unpress Esc, so do that for her by ignoring the escape code when
the subsequent keycode is outside of the normal printable range.
This restores the behavior from before nano-2.3.5 -- except that
Ctrl+Alt+key continues to report an unbound key.
This fixes https://savannah.gnu.org/bugs/?48459.
This prevents many keycode sequences from being misconstrued when a
command key plus other keystrokes accumulate in the input buffer.
This fixes https://savannah.gnu.org/bugs/?48395.
Add them so that <Esc> followed by <Home> will simply do "Home" instead of
reporting an unbound key. The same for <End>, <PageUp> and <PageDown>.
This restores the behavior from before nano-2.3.5.
It is easy to type beside the comma key and hit instead "m" or ".", so
accept also these as a separator between line and column number. And
when being generous anyway, also accept space, slash and semicolon.
This fulfills https://savannah.gnu.org/bugs/?48305.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com>
Precalculation of the multiline color data can be cut short when the
user is impatient and starts typing. But this would drop the first
byte of whatever was typed -- not nice when it was just plain text,
but surprising and worse when the first keystroke was a command.
This fixes https://savannah.gnu.org/bugs/?48388.
When for a multiline syntax-coloring rule the starting regex matches at
the exact same spot as the ending regex, do a second round of resets, so
that reevaluation starts further back and gets a few more things right.
This mildly fixes https://savannah.gnu.org/bugs/?47420.
When we get a ^J as verbatim input, it is not possible to include it
into the file buffer or the prompt answer, because this would mean
adding an encoded null to the buffer or answer, and that is not what
the user intended. One option would have been to simply ignore a ^J
in verbatim input. But the choice has been made to act the same way
as when the ^J (0x0A) is found in the file data: start a new line.
That is the same response as to the Enter key, yes -- but the code
for the Enter key is ^M (0x0D), not ^J. So, to be more precise,
rename the relevant variable from 'got_enter' to 'got_newline'.
When the user tab-completed a name at the Go To Directory prompt, this
name will end in a slash. Remove this slash, so the name can be found
in the file list (where directory names don't include the final slash).
This fixes http://savannah.gnu.org/bugs/?48353.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com>
Invalid multibyte sequences get depicted with the Replacement Character,
and unassigned codepoints are shown as if they were a space. Both have
a width of one.
Just allocate ample space up front and thus discard the delaying 'if' for
each and every character. In most cases this will allocate far too much,
but that hardly matters: it is freed again as soon as the line is printed.
Keystrokes are single integers (aided by the flags meta_key and
func_key) but in the input stream they can be encoded as escape
sequences (a series of bytes). Characters are values in byte
range, but in UTF-8 one character can consist of multiple bytes.
Also rename two variables, because the secondary input buffer
that they refer to contains only characters (mostly just one),
never any shortcuts; and there are too many "kbinput" already.
Also, other messages that are about --operatingdir don't use the term
"confined" either.
Suggested-by: Mario Blättermann <mario.blaettermann@gmail.com>
Don't make it the responsibility of the executed functions to restore
the list of shortcuts of the edit window. Just detect whether another
menu was displayed, and if so, redisplay the main menu.
The way to update nano.pot is to run 'make nano.pot-update' in the po
subdir. Updating a specific PO file is then done with 'make xx.po'.
(The script mistakenly included all leading comments, not just the
ones marked with "TRANSLATORS:".)
It sounded like an instigation to upgrade, or like a list of
instructions on how to upgrade. But it is merely a list of
noteworthy changes -- what other packages put in the NEWS file.
To add a character, one does not need to allocate twice its size.
And the amount to be moved does not depend on the size of the new
character; it just needs to include the terminating zero.
(This fixes in do_output() the same logical mistakes that were fixed
in do_statusbar_output() last February, in acf19bd and 7c0e433.)
Specifying an operating directory should either lead to a successfull
confinement, or nano should fail to start.
(Also: save the terminal settings as soon as possible, so that an early
die() will not restore uninitialized values.)
This fixes the first part of https://savannah.gnu.org/bugs/?47798 properly.
This fixes https://savannah.gnu.org/bugs/?48103.
(The fix is wasteful -- it should only discard the multidata if actually
the name *did* change, *and* if the applicable syntax changed.)
By moving the test for the only situation where do_comment() does nothing
(when only the magic line is selected) further up front, the add_undo()
can be called before the commenting/uncommenting starts and two variables
and an extra function are made unnecessary.
That is: don't mix the number of lines read with a warning about the
file being unwritable -- the former is just convenience information,
the latter is a must-see.
This fixes https://savannah.gnu.org/bugs/?48047.
When running in a non-UTF locale, and when strncasecmp() suffers from
the same defect as strncmp(), make sure not to pass a length with the
high bit set.
This reverts commit df8c3de from six years ago, which prevented a crash
on the Armel/Maemo platforms but causes nano to lose history items.
The strncmp() function on those platforms treats size_t numbers with
the high bit set as if they were zero. To avoid that, use a number
that cannot be seen as negative, as suggested by <alpha@qzx.com>.
This fixes https://savannah.gnu.org/bugs/?48048.
Tested-by: Tito Ragusa <farmatito@tiscali.it>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Store the file sizes from before and after the commenting/uncommenting
in the undo struct, so they can be restored when undoing or redoing.
This fixes https://savannah.gnu.org/bugs/?48062.
Signed-off-by: Mike Scalora <mike@scalora.org>
When opening a file that was edited before, and the remembered position
is near the end of the file, then don't center the target line but show
the last line of the file on the bottom line of the screen, thus showing
as much of the file content as possible.
This addresses https://savannah.gnu.org/bugs/?46243.
Instead of parsing every multibyte character twice, first with
parse_mbchar() and then with mbtowc(), just let mbtowc() do all
the work. This makes searching for a fixed string twice as fast.
This also gets rid of four variables and lots of memory allocations.
(And, more importantly: it stops nano messing up the internal state
of the multibyte-to-wide character conversion, and thus would make
the calls to mbtowc_reset() superfluous.)
This allows for commenting or uncommenting a line or a bunch of lines
with a single keystroke (default binding: M-3). The characters used
for commenting/uncommenting are specified by the active syntax file.
Reviewed-by: Benno Schulenberg <bensberg@justemail.net>
Signed-off-by: Mike Scalora <mike@scalora.org>
Move the initialization of the operating directory to after the
initialization of the screen, so that the above error can be shown.
This fixes the first part of https://savannah.gnu.org/bugs/?47798.
Between the first stat (that sets 'realexists') and the second stat
(directly after), the file might have disappeared, which would mean
that current_stat would be NULL. Prevent dereferencing this further
down.
Only when the user decides not to override an existing lockfile should
loading the corresponding file be skipped. Any failure to write the
lockfile should be ignored -- the file itself should be loaded anyway.
This fixes https://savannah.gnu.org/bugs/?47945.
Error messages about lock files should not get overwritten by purely
informational messages, only by alerting ones.
This fixes https://savannah.gnu.org/bugs/?47963.
The variable 'namecopy' has been passed to dirname(), so it is likely
to have been changed when it contains a slash. So, use a new variable
instead. Also, free the result of display_string().
This fixes https://savannah.gnu.org/bugs/?47956.
Having just opened a fresh buffer, 'openfile->next' will never be NULL,
because the list is circular.
Second, when compiled with --disable-nultibuffer, and deciding not to
override an existing lock, the 'return FALSE' should *not* be skipped,
because otherwise the named file will be opened after all.
This fixes an unreported bug.
Either the selected file was changed, or a file or directory was chosen
(and the Enter key virtually pressed), or a shortcut was executed. So,
just go and read the next key.
This fixes https://savannah.gnu.org/bugs/?47944.
If during startup there are multiple error messages, currently only the
last one remains and can be read. To improve on that, introduce a short
pause between error messages -- even if it's not enough to read them all,
at least the user will be aware that there are multiple ones.
This also causes a few error messages to beep that currently don't beep,
such as when a file is unwritable.
When doing a PageUp or PageDown in the browser, don't move the highlight
to the first line in the same column, but keep it in the same relative
position of the screen. If we're already on the first or last page,
move the highlight to the first or last line, but keep it in the same
column. If we're already on the first or last line, only then move it
to the first or last entry.
CONST_UPDATE is only relevant when in the main menu, not when in the
browser. So, check for that condition, instead of saving, changing,
and then restoring the setting.
There is no need to iterate through all the file names, as we already
know the length of the longest. From this it's easy to calculate how
many names fit on a line.
Also rename some things to be more fitting. And make sure that something
will be selected even when many files, including the selected one, have
disappeared.
When refreshing the screen (and thus the file list), use the prev_dir
mechanism to reselect the file that was selected before the refresh,
to prevent the selection from changing when files were added or deleted.
Also, when the selected name has disappeared, move the highlight one step
back, so that it is obvious that the selection has changed. (Decrementing
'selected' will never make it negative, because selected == 0 means the
'..' entry, and every directory has a '..' entry, so it will be found.)
This fixes https://savannah.gnu.org/bugs/?47812.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
When during searching we look at the keyboard, then don't look at
just the first keystroke, but check if there are more, and if so,
check each one until we find a Cancel -- or until all keystrokes
have been consumed and we can continue.
This fixes the first half of https://savannah.gnu.org/bugs/?47438.
Cancelling a search should restore waiting mode for the keyboard,
just like at the other exit points of the search routine.
And when the input routine has read in multiple keystrokes, it
should not blindly switch back to waiting mode, but only when
that mode was on before.
This fixes the second half of https://savannah.gnu.org/bugs/?47438.
When the terminal is very narrow, there is little point in showing only
part of the version string -- and chewing off one or two digits from the
version number might even give someone a wrong idea. The user is better
served with always showing the full filename, as long as it fits in the
available screen width.
This fixes https://savannah.gnu.org/bugs/?47703.
Also remove the item about one Replacement Character per invalid UTF-8
sequence, because how many bytes form a sequence? Two? Three? Four?
Better just put one Replacement Character per invalid byte, like is
done now.
When fixing a misspelling and not answering 'All' (but 'Yes' or 'No'),
the chance is quite substantial that one will type y or n at the end of
the next word. Diminish this chance by showing for a moment a message
on the statusbar.
Partitioning the file makes the undo system lose track, so that undoing
things has a good chance of losing data. Instead, just make sure that
the region is marked "backwards", with current at the top and the mark
at the bottom, and then let the replace loop take care of not going
outside of the marked region.
This also has the effect that if the marked region fits entirely on the
screen, or all the misspellings are onscreen, then the screen will not
be scrolled at all. Which makes for a smooth experience.
This fixes https://savannah.gnu.org/bugs/?47836,
and fixes https://savannah.gnu.org/bugs/?45573.
Since nano-2.4.1, reading in or pasting a large piece of text would put
the cursor on the bottom line, leaving only one line of the non-read or
non-pasted text visible. This is different from the centering behavior
of Pico, and somewhat disorienting, as you can't see "where you are" any
more in relation to the file as it was.
So now center the cursor whenever the read or pasted text is larger than
the screen, but don't center it when the text fits entirely on the screen.
(The latter avoids the effect of the screen jumping unnecessarily when
inserting just a few lines while the cursor is near the bottom.)
To achieve this behavior: default to focusing, and temporarily set it to
FALSE when the focusing effect is unwanted.
This fixes https://savannah.gnu.org/bugs/?47841.
For some reason the keyboard code seems to assume that all integers
waiting in the keybuffer form a single sequence. But this isn't the
case: when there is an escape (0x1b) among them, then that is where
a new sequence starts. So, prevent the input code from considering
an escape after a non-escape as part of the current sequence.
This fixes https://savannah.gnu.org/bugs/?47839.
When starting to replace misspelled words, pass the actual position
of the cursor instead of the position of the first found occurrence,
so that the cursor position will be updated for changed lengths.
This fixes https://savannah.gnu.org/bugs/?47834.
When verifying that a match is a separate word (during spell checking),
instead of first copying out the word, then passing the word, and then
measuring its length, just pass its length straigtaway.
When we're spell checking, we don't need a special mechanism to detect
we have come full circle: reaching the end-of-buffer means we're done.
So don't bother to reset came_full_circle when we're spell checking
(when begin == NULL) but simply ignore its value.
Add a global variable, 'present_path', so that 'cwd_tab_completion()'
knows where the user is in the browser, so that it can try completions
against names in that directory instead of always against names in the
current working directory (where nano was invoked).
This fixes https://savannah.gnu.org/bugs/?47234.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
The internal spell checker starts searching/replacing always at the top
of the buffer, so reaching the end of the buffer means we're done with
the current search/replace. This prevents the "Search Wrapped" message
from flashing over the statusbar at the end of a spelling replacement.
Commit 8704dde mistakenly removed this part of code -- it is not dead,
it is just that it will only fire when the user answered No at some of
the replacement prompts. So... when we've rereached the starting line,
a found occurrence is invalid when it is beyond the starting x (either
after or before it, dependending on the direction of search).
This fixes https://savannah.gnu.org/bugs/?47816.
Included files are meant to contain only syntax definitions; they may
not set or unset options, nor rebind keys, nor include other files.
This fixes https://savannah.gnu.org/bugs/?47391.
For a little contrast with the function edit_refresh() -- it's
annoying that when you search for the latter you get to see all
the settings of the flag too.
The function edit_update() is called by edit_refresh() itself, so it is
silly that the first sets 'edit_refresh_needed' to TRUE. This setting
is needed only in a few cases -- in the others it's not needed because
the screen does not need to be refreshed (it was just about positioning
the cursor), or 'edit_refresh_needed' has already been set by a call to
goto_line_posx(). So, just set the flag in the five places that need it
and spare the other four calls.
Since commit 41ed690, cancelling a prompt after tabbing would sometimes
leave the list of file names on the screen. When testing this first,
it worked fine -- I was fooled again by 'edit_refresh_needed' already
being TRUE when nano has just started up and sits waiting for the first
key stroke. I have to hunt this down and kill it.
Since commit dac0aa1, nano would leave edittop at current after reading
data from standard input, meaning that everything that had been read in
was invisible, "scrolled off" the top of the screen. Correct this by
explicitly setting edittop.
The above does not happen for ^R (^X) because it has a special mechanism
to save and restore edittop. Nor does it happen for ^R ^X M-F because it
sets current to the top of the file and refreshing the screen will make
edittop follow, or -- in case just one unterminated line was read in --
edittop will already be equal to current.
A normal lock file is apparently 1024 bytes in size, so the second
attempt at reading bytes from the file would try to read 8192 more
bytes into a buffer that has room for only 7168 left. According to
valgrind, the read() function doesn't like that -- and true: if for
some reason the lock file had suddenly expanded, the buffer would
overflow.
This fixes https://savannah.gnu.org/bugs/?47156.
Commit 36ec76a made the wrong change: after a tab that did not list any
file names on the screen, a refresh /is/ needed, because a previous tab
might have listed things on the screen. But at the end of the prompt,
it is not necessary to refresh the edit window if things were listed,
because the window will be refreshed anyway after reading in a file.
Use 'slash' to point at a possible slash, use 'filename' just to
point at the real file name, and use 'wasdirname' just to point at
the dir's name before expanding it in order to be able to free it.
Also, remove two superfluous asserts: 'dirname' cannot be NULL
because it has just been mallocstrcpy'd, and checking 'num_matches'
is pointless as it would crash on the next statement anyway.
This is a remnant from 2001, when things were different. Now, there
is no need to refresh the edit window when tabbing produced no list.
When it did produce a list, it is cleared off later.
If for some reason opening the spell-checked or formatted file fails,
don't throw away the current contents of the buffer.
(It should also give proper feedback about the failure, but we'll leave
that for some other time.)
Also, store the input character earlier, so we don't have to use len - 1.
Furthermore, len increments in steps of 1, so it cannot pass the value of
bufx unnoticed, so use a comparison for equality.
Most of the time NO_CONVERT will not be set, the number of lines will
not be zero, and the format of the file will be zero. Rearrange the
conditions so that they will evaluate as FALSE as soon as possible.
Index i follows almost synchronously the value of len. Since we're
adding characters to the intermediate buffer always only at the end,
just use len as the index.
Until now (when not leaving files unconverted), nano would fumble and
drop the final carriage return of a Mac file, and would thus treat the
last line of such a file as an unterminated line and prepend it to the
current line of the buffer. Correct that, and delete the dead piece
of code that was meant to do this.
This fixes https://savannah.gnu.org/bugs/?47716.
When we don't set edittop in read_line(), we don't need to readjust it in
read_file(), because in that particular case it will still be pointing at
current. And since fileptr is a new, freshly created line, it can never
be equal to filebot, so there is no point in comparing them.
If more than one line was inserted at the beginning of the file, leave it
up to the screen handling to set edittop to what it should be.
Move the setting of fileage a bit down, to its sister setting: the line
at current gets "connected" either to the top-of-file pointer or to the
last line of the inserted file.
The number of lines to scroll is: the y position of the start of the
current line, plus the extra lines that this line occupies, plus the
extra lines that the next line occupies, plus one, minus the y position
of the last window line.
The y position of the start of the current line is current_y -
xplustabs() / COLS, the extra lines are strlenpt(data) / COLS,
and the y position of the last window line is editwinrows - 1.
Note that we first compute the amount to scroll before actually moving
to the next line, because we need the current value of current_x, not
the one that it will have in the next line. The placewewant value is
not good either, because it might be beyond where we actually are.
This fixes https://savannah.gnu.org/bugs/?47665.
Doing a chdir("..") will not fail when the root directory is reached,
and when getcwd() keeps failing too, we have no way of knowing when
to stop. So, simply limit the number of attempted chdirs, to avoid
getting into an endless loop.
This avoids the hang in https://savannah.gnu.org/bugs/index.php?47659.
Reported-by: Chris Renshaw <osm0sis@outlook.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Also, don't force a full refresh of the edit window simply because the
current line needs to be horizontally scrolled. And further, when the
adjustment of edittop has determined that a full refresh is needed,
get out and don't bother scrolling some lines first.
When in softwrap mode and scrolling down a line, and thus going to
do a full refresh, get out and don't bother redrawing the current
and prior lines first.
When moving the cursor up or down one line, redraw the new current
line only when the target column (placewewant) is beyond the screen,
or when the mark is on.
(This still redraws the current and prior lines unnecessarily when
they are in fact shorter than the screen is wide and the mark is off,
but we'll let that pass for now.)
Also, when softwrap is on, we don't have have to redraw the current
and prior lines at all (when the mark is off): they are in full view,
there is nothing to show or hide.
When scrolling down a line, a full refresh of the edit window is only
needed when softwrap is on, because only then the movement is irregular.
When each file line takes up just one screen line (softwrap is off),
edit_scroll() is perfectly able to scroll and redraw only the necessary
lines.
(But... when doing a full refresh anyway with softwrap, why bother
scrolling at all? Why not just adjust edittop and call refresh?)
The old_current line needs to be redrawn only if it differs from current,
and if it wasn't drawn already by the iteration for when the mark is on.
Also make the conditions involving horizontal scrolling more precise.
Instead of saving the current value of placewewant, then setting the
new value, and then passing the old value to edit_redraw() in seven
different places, just let edit_redraw() do this saving and setting.
In the bargain placewewant is now only recalculated when it matters
-- when allow_update is TRUE -- and not when it's superfluous.
Nano doesn't start doing anything with the edit window or the keyboard
until all files have been read in or a blank buffer has been opened, so
the case of openfile->current == NULL will never occur.
Also correct the comment -- because with multibyte characters, it is
very well possible that the screen column corresponding to current_x
is smaller than current_x itself.
Instead of allocating a fixed amount of 128 bytes, which will overflow
and segfault, adjust the allocation to the length of the file name, and
if necessary trim the file name to make the prompt fit on the screen.
This fixes https://savannah.gnu.org/bugs/?47511.
Reported-by: Aapo Rantalainen <aapo.rantalainen@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
In the innermost search loop, don't set placewewant, because this loop
is also used for replacing and spell fixing, when we don't really want
to be there: we are just passing through. Not setting placewewant means
we don't need to save and restore it in those passing-through routines.
The value of placewewant is only relevant when doing cursor movement,
which doesn't happen during replacing nor spell checking, so there is
no need to keep placewewant up to date -- it is set when it matters:
at the end of go_looking().
Stop keeping track of the vertical screen position when searching for
something. If nothing is found, current_y doesn't change, and all the
incrementing/decrementing was a waste of time. If something is found
and it is onscreen, it is easy to calculate the new current_y. And if
something is found and it is offscreen, then current_y is irrelevant,
because we will be either centering the found occurrence (searching)
or putting it on the top or bottom line (bracket matching).
(The above does not take softwrapping into account, but neither did
the old code, so this doesn't introduce any new bugs.)
(Also, when the search wraps, and the viewport is away from head or
tail of the file, and the found occurrence is within the viewport,
then the incremented/decremented current_y would be way wrong, but
this didn't have any adverse effects as far as I could tell. It
seems that current_y is irrelevant in most cases.)
Add a third mode of scrolling, FLOWING, besides CENTERING and STATIONARY.
This is used for word and paragraph jumping (and for bracket matching,
but that worked correctly already), and only when focusing is FALSE.
The new mode prevents the screen from scrolling too many lines when
there are several blank lines at the bottom of the edit window and
the next word or paragraph is out of view.
This fixes https://savannah.gnu.org/bugs/?47194.
On iTerm2 on OS X, the Option+Arrow keys produce special sequences
that start with two escapes. Catch these sequences and interpret
them appropriately as WordLeft / WordRight / Home / End.
Signed-off-by: Mike Scalora <mike@scalora.org>
Signed-off-by: Thomas Rosenau <thomasr@fantasymail.de>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
When finding a misspelled word, the length of the match is simply the
length of that word, and its span in columns is simply the number of
columns that it occupies. Compute it thus directly.
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
When searching for a misspelled word takes a while, and the user
stops this search with ^C, then abort the spelling-checking session.
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
that is taking too long. This fixes Savannah bug #47439.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5776 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(The measurable effect (during long searches, for example) is zero, though.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5773 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
an operating directory is not the same as restricted mode.
(In restricted mode, the file browser is not available at all.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5772 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
invalid escape sequence, and when entering a verbatim keystroke.
But leaving the cursor off during Unicode input, for extra feedback.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5771 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
anyway, and it will be placed back when it's needed: in the main loop.
This prevents a segfault laid bare by r5763: when trying, at startup,
to open a directory, there really is no open buffer yet.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5766 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
variable for a little optimization.
Openfile can never be NULL -- it should have been called openbuffer, and
before we start fiddling with the cursor, we will always have an open buffer.
Edittop might be NULL, but that's okay.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5763 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
a misspelled word twice. And deleting the piece of dead code that was meant
to do this. This fixes Savannah bug #47188.
When we've reached again the same line where we started and we find an
instance there, then this can only be /before or at/ the position from
where we started, otherwise we would have found it when we commenced
searching. And so... that little piece of dead code does absolutely
nothing -- it will never fire.
It's so nice... nano is full of Easter Eggs! :)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5760 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
using it when it's available (which it is on OS X systems).
This completes the fix for Savannah bug #47325.
Patch by Thomas Rosenau.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5759 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
been set to 'answer' in search_init() when 'answer' isn't empty, and when
'answer' /is/ empty we use 'last_search' anyway.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5755 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
deletion of words like the pressing of Backspace/Delete, so they don't
overwrite the lines you cut elsewhere and want to paste into the place
of the cut words.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5751 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
and the next time a Search or Replace is run, this answer is overwritten
with an empty string.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5749 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
return with -2 when answer is empty, so when answer is empty
i cannot be zero.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5747 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
We will need this again when one day we make a toggle between
jumping to a directory and searching for a filename fragment,
just like the ^T toggle that exists in the Search / Go-to-line
menus. But for now, we don't need this.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5745 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
functions that could be executed -- other than the line-edition ones,
which are executed under do_prompt(). So the latter won't return
unless either it was cancelled or an answer was given. Also, if it
/had/ returned with a value bigger than zero, it tried to put back
the key sequence for do_gotolinecolumn_void(), which does not exist
in the MBROWSER menu, so this would not have done anything.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5744 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
the idea that it might have something to do with 'end_regex'.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5733 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
non-GNU systems. This is a partial fix for Savannah bug #47325.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5731 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
not for every added color, thus saving some 15 microseconds.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5729 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
a leading underscore as the only difference is not enough.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5726 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
comes first, so that a search can stop at the first match instead of always
having to run through the entire list.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5716 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
instead of the first syntax that matches a certain magic string
(forgotten in the previous commit).
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5705 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
name given on the command line, not from the name of the target file.
This fixes Savannah bug #47307.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5703 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
an rcfile ends or when an invalid syntax command is found.
This fixes Savannah bug #47207
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5696 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
to file extensions, but also to header lines and magic strings.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5690 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
the first element, and the insertion of a new element) directly.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5678 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
And not minding when the column number is zero or negative.
This partially fixes Savannah bug #47131.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5669 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
there is no need to put one in. Just trim the allocation.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5666 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
* Add ability to kill the trailing spaces when justifying
code. New nanorc option kill_spaces_on_wrap, we'll see
whether this warrants a command line flahg or not.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5664 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(Note that openfile cannot be NULL here. And in case it is,
nano should crash because DEBUG is enabled.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5658 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
when the first Tab added the part that all matches have in common.
So now two Tabs in a row will always show the list of possible
completions -- if there /are/ any completions. Which means that
a second Tab will either: 1) do nothing, when the name is complete
and exists; 2) beep, when nothing in the current directory starts
with the current string; 3) show the list of matches.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5656 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
instead of in the given string. This fixes Savannah bug #47199.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5654 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
history. This fixes Savannah bug #47124 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5653 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This fixes Savannah bug #47129 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5647 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
and also when it is the first and only line.
This fixes Savannah bug #47153 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5646 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
because 'allow_cntrls == FALSE' meant that controls were being filtered.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5644 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
iteration through search matches: showing them centered when found offscreen.
This fixes Savannah bug #47127.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5641 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
needed), so that it no longer shows in the help screen nor in the file list.
This fixes Savannah bug #47126.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5640 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
error messages upon reentry. And, if there are any messages,
allowing the user a little time to read them.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5632 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
With this option, nano would simply refuse to write to any symlinked file;
if anyone really used this option, they would certainly have complained.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5608 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
mentioning how to enter Unicode and that regular expressions are line oriented.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5605 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This fixes a segfault reported in Savannah bug #47011.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5596 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
of the environment (which can lead to a root-owned .nano/ directory in
the invoking user's home directory). This addresses Ubuntu bug #1471459.
(See https://bugs.launchpad.net/ubuntu/+source/nano/+bug/1471459.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5580 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
any more, not a SIGWINCH either. And deleting an always-FALSE 'if'.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5577 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
a setting or making an excursion to the file browser.
This fixes Savannah bug #46945.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5576 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(So that most likely not more than two hundred plus a handful
will be written out. This was the easiest to implement.)
See https://lists.gnu.org/archive/html/nano-devel/2016-01/msg00050.html.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5571 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This fixes Savannah bug #46904 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5567 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
There's a bunch of return cases where we don't free the new full filename
which leads to leaks when writing out new files. One way to reproduce:
$ rm -f foo
$ nano foo
<hit enter>
<ctrl+o to save>
<ctrl+x to exit>
-> memory leak
Patch by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5563 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This fixes Savannah bug #26977 -- a hang on start="^" end="$".
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5538 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
needed (for the sake of multiline regexes), instead of doing it always.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5524 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
needed, before doing a redraw of the current line.
This fixes Savannah bug #46794
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5523 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
as it colours some things wrong and is a glutton on time.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5513 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
changed buffer after all, as the buffer may not have a name yet.
This fixes Savannah bug #46752.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5512 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
there's an error saving history state at exit is pointless and annoying.
Just notify the user and move on.
Patch by Mike Frysinger, tweaked and extended by Benno.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5507 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Use plain AC_CHECK_HEADERS() instead, so ./configure will not check
for magic.h and zlib.h when --disable-libmagic is given.
Patch by Christian Weisgerber.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5505 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
routine isn't getting something from somewhere but just converting it.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5503 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
And making the checking for an impatient user into a separate routine.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5501 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
not just for the first. This fixes Savannah bug #46511.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5500 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
four different places. It is not a problem that the history routines
also use these functions, as history nodes will never equal filebot.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5491 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Users who want an immediate save, can bind the function 'savefile'.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5489 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
when trying to undo edits after an indentation change.
This works around Savannah bug #46591.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5474 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
making mistakes) when trying to undo edits after a justification.
This works around Savannah bug #45531.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5473 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Original file by Arturo Borrero Gonzalez.
This addresses Debian bug #805288.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5465 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(Note that there can only be colorstrings when there /is/ a syntax,
so there is no need to check for the latter here.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5452 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
also when the coloured part is horizontally scrolled off.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5451 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
directly on the statusbar instead of as an undid or redid message.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5442 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
and checking for this just once for every burst of keystrokes.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5439 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
command line does not exist. This fixes Savannah bug #46503.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5436 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
ncurses for the keycodes. This addresses Debian bug #800681.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5434 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This now mirrors unlink_opennode() and delete_opennode().
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5433 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
override the value of a "set fill" option in an rcfile.
This fixes Savannah bug #46492.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5428 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
because the latter behaves differently depending on the setting of autoindent.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5400 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(Finally I understood what valgrind was complaining about.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5398 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
more symmetrical: wrapped in add_undo() + update_undo() where needed.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5390 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
and recalculating the mark's x coordinate only when the mark comes after it.
Also correcting the recalculation in one case.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5384 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
last action. Necessary for when typing text is broken by an undo+redo.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5379 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
writing out the file immediately, without prompting.
Patch by David Lawrence Ramsey.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5378 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
'u->mark_begin_lineno' is being used as the length of the insertion.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5375 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
instead of to the beginning of the preceding word, to match the
behaviour of Pico and of most other editors. It also rewrites
the entire routine.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5372 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
as that is the only known situation where things go wrong. This spares
all regular text a significant slowdown.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5370 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Apparently there is /some/ state somewhere after all. Don't have time
now to figure out where exactly.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5369 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
nor bothering with a separate initialization function when it's used only once.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5365 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Appending, Prepending, making Backups, and opening the File Browser.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5357 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(It will always be false, so it is apparently unneeded.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5355 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
has not been built in, since the default values are quite usable.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5348 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
without adding confusing single quotes to the Info document.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5346 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
the standard order, and giving the Savannah URL for bug reporting.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5344 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
--version, and to distinguish it more from the description of ^G.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5337 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
to clarify some keys and to see which ones can be rebound.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5336 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
from the cursor to the preceding or succeeding word start.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5334 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
two superfluous checks for the definition of a formatter.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5325 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
first asking for its name. Patch was suggested by Seiya Nuta.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5318 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
opening an empty buffer when the name of a directory is specified.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5304 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
and avoiding warnings about too large bit shifts.
Patch by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5303 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Removing an unneeded condition -- 'added_magicline' can only be
true when NO_NEWLINES isn't.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5297 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
at the end-of-file; just adding a token undo item to be able to put the
cursor back at the very tail of the file.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5285 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
AC_DEFINE(ENABLE_COMMENT, 1, [Define this to disable the comment/uncomment functionality.])
fi
fi
AC_ARG_ENABLE(extra,
AS_HELP_STRING([--disable-extra], [Disable extra features, currently only easter eggs]))
if test "x$enable_extra" = xno; then
@@ -113,6 +125,19 @@ fi
AC_ARG_ENABLE(libmagic,
AS_HELP_STRING([--disable-libmagic], [Disable detection of file types via libmagic]))
AC_ARG_ENABLE(linenumbers,
AS_HELP_STRING([--disable-linenumbers], [Disable line numbering]))
if test "x$enable_tiny" = xyes; then
if test "x$enable_linenumbers" != xyes; then
enable_linenumbers=no
fi
fi
if test "x$disable_linenumbers" != xyes; then
if test "x$enable_linenumbers" != xno; then
AC_DEFINE(ENABLE_LINENUMBERS, 1, [Define this to enable line numbering.])
fi
fi
AC_ARG_ENABLE(mouse,
AS_HELP_STRING([--disable-mouse], [Disable mouse support (and -m flag)]))
if test "x$enable_mouse" = xno; then
@@ -527,6 +552,7 @@ else
fi
AC_CHECK_LIB([$CURSES_LIB_NAME], use_default_colors, AC_DEFINE(HAVE_USE_DEFAULT_COLORS, 1, [Define this if your curses library has the use_default_colors() command.]))
AC_CHECK_LIB([$CURSES_LIB_NAME], key_defined, AC_DEFINE(HAVE_KEY_DEFINED, 1, [Define this if your curses library has the key_defined() command.]))
<ahref="#2.4">2.4. By subversion (for the brave).</a></p></blockquote>
<ahref="#2.4">2.4. By GIT (for the brave).</a></p></blockquote>
<h2><ahref="#3">3. Installation and Configuration</a></h2>
<blockquote><p><ahref="#3.1">3.1. How do I install the RPM or DEB package?</a><br>
<ahref="#3.2">3.2. Compiling from source: WHAT THE HECK DO I DO NOW?</a><br>
@@ -28,8 +28,8 @@
<ahref="#3.6">3.6. How can I make the executable smaller? This is too bloated!</a><br>
<ahref="#3.7">3.7. Tell me more about this multibuffer stuff!</a><br>
<ahref="#3.8">3.8. Tell me more about this verbatim input stuff!</a><br>
<ahref="#3.9">3.9. How do I make a .nanorc file that nano will read when I start it?</a></br>
<ahref="#3.9.1">3.9.1. How about in Win32?</a></p></blockquote>
<ahref="#3.9a">3.9a. How do I make a .nanorc file that nano will read when I start it?</a><br>
<ahref="#3.9b">3.9b. How about in Win32?</a></p></blockquote>
<h2><ahref="#4">4. Running</a></h2>
<blockquote><p><ahref="#4.1">4.1. How do I open a file with a name beginning with '+' from the command line?</a><br>
<ahref="#4.2">4.2. Ack! My Backspace/Delete/Enter/Meta/double bucky key doesn't seem to work! What can I do?</a><br>
@@ -61,7 +61,7 @@
<ahref="#7.2">7.2. I want to send the development team a big load of cash (or just a thank you).</a><br>
<ahref="#7.3">7.3. How do I submit a bug report or patch?</a><br>
<ahref="#7.4">7.4. How do I join the development team?</a><br>
<ahref="#7.5">7.5. Can I have write access to the subversion tree?</a></p></blockquote>
<ahref="#7.5">7.5. Can I have write access to the GIT tree?</a></p></blockquote>
<h2><ahref="#8">8. ChangeLog</a></h2>
<hrwidth="100%">
<h1><aname="1"></a>1. General</h1>
@@ -84,25 +84,26 @@
<h2><aname="1.5"></a>1.5. Why the name change from TIP?</h2>
<blockquote><p>On January 10, 2000, TIP was officially renamed to nano because of a namespace conflict with another program called 'tip'. The original 'tip' program "establishes a full duplex terminal connection to a remote host", and was included with many older Unix systems (and newer ones like Solaris). The conflict was not noticed at first because there is no 'tip' utility included with most GNU/Linux distributions (where nano was developed).</p></blockquote>
<h2><aname="1.6"></a>1.6. What is the current version of nano?</h2>
<blockquote><p>The current stable version of nano *should* be 2.2.6. Of course, you should always check the nano homepage to see what the latest and greatest version is.</p></blockquote>
<blockquote><p>The current version of nano *should* be 2.7.0. Of course, you should always check the <ahref="https://nano-editor.org/">nano homepage</a> to see what the latest and greatest version is.</p></blockquote>
<h2><aname="1.7"></a>1.7. I want to read the man page without having to download the program!</h2>
<p>You can also have a look at the <ahref="ftp://ftp.debian.org/debian/pool/main/n/nano/">Package Pool</a> to see all the available binary and source packages.</p>
</blockquote>
<h2><aname="2.4"></a>2.4. By subversion (for the brave).</h2>
<blockquote><p>For the 'bleeding edge' current version of nano, you can use subversion to download the current source code. <b>Note:</b> believe it or not, by downloading code that has not yet stabilized into an official release, there could quite possibly be bugs, in fact the code may not even compile! Anyway, see <ahref="http://svn.savannah.gnu.org/viewvc/trunk/nano/README.SVN?root=nano&view=markup">the nano SVN document</a> for info on anonymous SVN access to the nano source.</p></blockquote>
<h2><aname="2.4"></a>2.4. By GIT (for the brave).</h2>
<blockquote><p>For the 'bleeding edge' current version of nano, you can use GIT to download the current source code. <b>Note:</b> believe it or not, by downloading code that has not yet stabilized into an official release, there could quite possibly be bugs, in fact the code may not even compile! Anyway, see <ahref="http://git.savannah.gnu.org/cgit/nano.git/tree/README.GIT">the nano GIT document</a> for info on anonymous GIT access to the nano source.</p></blockquote>
<hrwidth="100%">
<h1><aname="3"></a>3. Installation and Configuration</h1>
<h2><aname="3.1"></a>3.1. How do I install the RPM or DEB package?</h2>
@@ -135,18 +136,20 @@
<h2><aname="3.6"></a>3.6. How can I make the executable smaller? This is too bloated!</h2>
<blockquote><p>Actually, there are several parts of the editor that can be disabled. You can pass arguments to the <b>configure</b> script that disable certain features. Here's a brief list:</p>
<b>--disable-wrapping</b> Disable all wrapping of text (and -w flag)</pre>
<b>--disable-wrapping</b> Disable all hard-wrapping of text</pre>
<p>There's also the <b>--enable-tiny</b> option which disables everything above, as well as some larger chunks of the program (like the marker code that you use with Control-^ to select text). Also, if you know you aren't going to be using other languages you can use <b>--disable-nls</b> to disable internationalization and save a few K to a few dozen K depending on if you have locale support on your system. And finally there's always good old <b>strip</b> to strip all debugging code and code that exists in libraries on your system.</p>
<p>With <b>--disable-wrapping-as-root</b> you can disable any hard-wrapping by default when the user is root, useful to prevent accidentally changing long lines in system configuration files.</p>
</blockquote>
@@ -156,12 +159,12 @@
<h2><aname="3.8"></a>3.8. Tell me more about this verbatim input stuff!</h2>
<blockquote><p>To use verbatim input, you must be using nano 1.3.1 or newer. When you want to insert a literal character into the file you're editing, such as a control character that nano usually treats as a command, first press <b>Meta-V</b> (if you're not at a prompt, you'll get the message "Verbatim Input"), then press the key(s) that generate the character you want.</p>
<p>Alternatively, if you've enabled Unicode support (see section <ahref="#5.3">5.3</a>), you can press <b>Meta-V</b> and then type a six-digit hexadecimal code (from 000000 to 10FFFF, case-insensitive), and the character with the corresponding value will be inserted instead. The prompt will change to "Unicode Input" when you do this.</p></blockquote>
<h2><aname="3.9"></a>3.9. How do I make a .nanorc file that nano will read when I start it?</h2>
<blockquote><p>It's not hard at all! But, your version of nano must not have been compiled with <b>--disable-nanorc</b>, and must be version 1.1.12 or newer (use nano -V to check your version and compiled features). Then simply copy the <b>nanorc.sample</b> that came with the nano source or your nano package (most likely in /usr/doc/nano) to .nanorc in your home directory. If you didn't get one, the syntax is simple. Flags are turned on and off by using the word <b>set</b> and the getopt_long flag for the feature, for example "set nowrap" or "set suspend".</p></blockquote>
<h2><aname="3.9.1"></a>3.9. How about in Win32?</h2>
<blockquote><p>If you're using the official nano .zip file and have extracted all the files, you should take the file nano.rc and place it somewhere on your Win32 system (for example if you have write permission to do so, at the top of C:\). Then you must create an Environment variable called HOME which points to the directory where you put nano.rc. In Windows XP, you can get to Environment variables by right-clicking "My Computer" either on the desktop or in the Start Menu, and selecting Properties. This should bring up the System Properties panel. Then click the Advanced Tab, and there should be a button called Environment Variables. Click that to bring up the Environment Variables section. Now, under User Variables you should be able to click the New button, and make a new Variables Name called HOME, with the Variable Value of whatever path you copied nano.rc into (just the directory name; don't add nano.rc onto the end).</p>
<p>We're still working on documentation for enabling synax highlighting on Win32; please bear with us.</p>
<p>Note that the nano.rc file must remain Unix-formated in order for nano to understand it. In other words, you should probably use only nano to edit its config file. Other programs like Wordpad and Notepad will convert the file to DOS format when saving, and the latter does not even properly read Unix-formatted files to begin with.</p></blockquote>
<h2><aname="3.9a"></a>3.9a. How do I make a .nanorc file that nano will read when I start it?</h2>
<blockquote><p>It's not hard at all! But, your version of nano must <b>not</b> have been compiled with <b>--disable-nanorc</b>, and must be version 1.1.12 or newer (use nano -V to check your version and compiled features). Then simply copy the <b>nanorc.sample</b> that came with the nano source or your nano package (most likely in /usr/doc/nano) to .nanorc in your home directory. If you didn't get one, the syntax is simple. Flags are turned on and off by using the words<b>set</b> and <b>unset</b> plus the long option name for the feature. For example,"set nowrap" or "set smarthome".</p></blockquote>
<h2><aname="3.9b"></a>3.9b. How about in Win32?</h2>
<blockquote><p>If you're using the official nano .zip file and have extracted all the files, you should take the file nano.rc and place it somewhere on your Win32 system (for example, if you have write permission to do so, at the top of C:\). Then you must create an Environment variable called HOME which points to the directory where you put nano.rc. In Windows XP, you can get to Environment variables by right-clicking "My Computer" either on the desktop or in the Start Menu, and selecting Properties. This should bring up the System Properties panel. Then click the Advanced Tab, and there should be a button called Environment Variables. Click that to bring up the Environment Variables section. Now, under User Variables you should be able to click the New button, and make a new Variables Name called HOME, with the Variable Value of whatever path you copied nano.rc into (just the directory name; don't add nano.rc onto the end).</p>
<p>We're still working on documentation for enabling syntax highlighting on Win32; please bear with us.</p>
<p>Note that the nano.rc file must remain Unix-formatted in order for nano to understand it. In other words, you should probably use only nano to edit its config file. Other programs like Wordpad and Notepad will convert the file to DOS format when saving, and the latter does not even properly read Unix-formatted files to begin with.</p></blockquote>
<hrwidth="100%">
<h1><aname="4"></a>4. Running</h1>
<h2><aname="4.1"></a>4.1. How do I open a file with a name beginning with '+' from the command line?</h2>
@@ -182,9 +185,9 @@
<h2><aname="4.5"></a>4.5. How do I type the F13-F16 keys shown in the help browser? My keyboard only has F1-F12!</h2>
<blockquote><p>It depends on the terminal type you're using. On some terminals, such as the FreeBSD console, xterm, konsole, and gnome-terminal, Shift-F1 to Shift-F4 will generate F13 to F16. On other terminals, such as the Linux console, rxvt, and Eterm, Shift-F3 to Shift-F6 will generate F13 to F16.</p></blockquote>
<h2><aname="4.6"></a>4.6. nano crashes when I type <insert keystroke here>!</h2>
<blockquote><p>If you aren't trying some bizarre keystroke combination with some bizarre $TERM entry, chances are you have found a bug. You are welcome to submit it to the <ahref="mailto:nano-devel@gnu.org">nano-devel</a> list or in the <ahref="https://savannah.gnu.org/bugs/?group=nano">bug database</a> on Savannah.</p></blockquote>
<blockquote><p>If you aren't trying some bizarre keystroke combination with some bizarre $TERM entry, chances are you have found a bug. You are welcome to submit it to the <ahref="mailto:nano-devel@gnu.org">nano-devel</a> list or in the <ahref="https://savannah.gnu.org/bugs/?group=nano">bug tracker</a> on Savannah.</p></blockquote>
<h2><aname="4.7"></a>4.7. nano crashes when I resize my window. How can I fix that?</h2>
<blockquote><p>Older versions of nano had this problem, please upgrade to a newer version (at least 0.9.9, but 2.2.6 is recommended).</p></blockquote>
<blockquote><p>Older versions of nano had this problem. Please upgrade to version 2.7.0 or newer.</p></blockquote>
<h2><aname="4.8"></a>4.8. [version 1.3.12 and later] I'm using glibc 2.2.3, and nano crashes when I use color support or do regular expression searches. How can I fix that?</h2>
<blockquote><p>It's a bug in glibc 2.2.3. You should upgrade to at least glibc 2.2.4.</p></blockquote>
<h2><aname="4.9"></a>4.9. [version 1.1.12 and earlier] Why does nano show ^\ in the shortcut list instead of ^J?</h2>
@@ -207,20 +210,19 @@
<p><b>my_hdr X-Composer: nano x.y.z</b></p>
<p>Again, replace x.y.z with the version of nano you use.</p></blockquote>
<h2><aname="4.12"></a>4.12. I've compiled nano with color support, but I don't see any color when I run it!</h2>
<blockquote><p>If you want nano to actually use color, you have to specify the color configurations you want it to use in your .nanorc. Several example configurations are in the <b>doc/syntax</b> subdirectory of the nano source, which are normally installed to <b>/usr/local/share/nano</b>. To enable all of them, uncomment the line <b># include "/usr/local/share/nano/*.nanorc"</b> in your nanorc. See also section <ahref="#3.9">3.9</a>.</p></blockquote>
<blockquote><p>If you want nano to actually use color, you have to specify the color configurations you want it to use in your .nanorc. Several example configurations are in the <b>doc/syntax</b> subdirectory of the nano source, which are normally installed to <b>/usr/local/share/nano</b>. To enable all of them, uncomment the line <b># include "/usr/local/share/nano/*.nanorc"</b> in your nanorc. See also section <ahref="#3.9a">3.9a</a>.</p></blockquote>
<h2><aname="4.13"></a>4.13. How do I select text for or paste text from the clipboard in an X terminal when I'm running nano in one and nano's mouse support is turned on?</h2>
<blockquote><p>Try holding down the Shift key and selecting or pasting the text as you normally would.</p></blockquote>
<h2><aname="4.14"></a>4.14. When I paste text into a document, each line gets indented further than the last. Why does nano do this, and how can I avoid it?</h2>
<blockquote><p>You have the autoindent feature turned on. Hit Meta-I to turn it off, paste your text, and then hit Meta-I again to turn it back on.</p></blockquote>
<h2><aname="4.15"></a>4.15. On startup I get a message that says "Detected a legacy nano history file". Now older nano versions can't find my search history!</h2>
<blockquote><p>In nano 2.3.0, cursor-position history was introduced, and both history files now reside under a .nano directory in your home. nano was trying to move this file into the new location so it could continue to use it. This means that if you try and use an earlier version of nano, it will be unable to see your current search history. To fix this, run the following commands:<br>
mv ~/.nano/search_history ~/.nano_history<br>
ln -sf ~/.nano_history ~/.nano/search_history<br>
</p></blockquote>
<blockquote><p>In nano 2.3.0, cursor-position history was introduced, and both history files now reside in a .nano subdirectory in your home directory. A newer nano will move an existing search-history file to this new location so it can continue to be used. This means that if you then try and use an earlier version of nano, it will be unable to see your current search history. To fix this, run the following command:<br>
</p><p>The "migration service" (moving the search-history file to its new location) will be deleted from nano in early 2018.</p></blockquote>
<hrwidth="100%">
<h1><aname="5"></a>5. Internationalization</h1>
<h2><aname="5.1"></a>5.1. There's no translation for my language!</h2>
<blockquote><p>On June of 2001, GNU nano entered the <ahref="http://translationproject.org/html/welcome.html">Translation Project</a> and since then, translations should be managed from there.</p>
<blockquote><p>In June 2001, GNU nano entered the <ahref="http://translationproject.org/html/welcome.html">Translation Project</a> and since then, translations should be managed from there.</p>
<p>If there isn't a translation for your language, you could ask <ahref="http://translationproject.org/team/">your language team</a> to translate nano, or better still, join that team and do it yourself. Joining a team is easy. You just need to ask the team leader to add you, and then send a <ahref="http://translationproject.org/disclaim.txt">translation disclaimer to the FSF</a> (this is necessary as nano is an official GNU package, but it does <b>not</b> mean that you transfer the rights of your work to the FSF, it's just so the FSF can legally manage them).</p>
<p>In any case, translating nano is very easy. Just grab the latest <b>nano.pot</b> file listed on <ahref="http://translationproject.org/domain/nano.html">nano's page</a> at the TP, and translate each <b>msgid</b> line into your native language on the <b>msgstr</b> line. When you're done, you should send it to the TP's central po repository.</p></blockquote>
<h2><aname="5.2"></a>5.2. I don't like the translation for <x> in my language. How can I fix it?</h2>
<h2><aname="6.1"></a>6.1. Why should I use nano instead of Pico?</h2>
<blockquote><p>There are many reasons to use nano instead of Pico. A more complete list can be found at the <ahref="http://www.nano-editor.org/">nano homepage</a>.</p></blockquote>
<blockquote><p>There are many reasons to use nano instead of Pico. A more complete list can be found at the <ahref="https://nano-editor.org/">nano homepage</a>.</p></blockquote>
<h2><aname="6.2"></a>6.2. Why should I use Pico instead of nano?</h2>
<blockquote><p>Again, check out the <ahref="http://www.nano-editor.org/">nano homepage</a> for a good summary of reasons. It really is a matter of personal preference as to which editor you should use. If you're the type of person who likes using the original version of a program, then Pico is the editor for you. If you don't mind sacrificing mailer integration with Pine, and are looking for a few more features, as well as a 'better' license in terms of adding your own changes, nano is the way to go.</p><p>Note that the last of these no longer applies to the new version of Pine, <ahref="http://www.washington.edu/alpine/">Alpine</a>, which is under the Apache License, version 2.0.</p></blockquote>
<blockquote><p>Again, check out the <ahref="https://nano-editor.org/">nano homepage</a> for a good summary of reasons. It really is a matter of personal preference as to which editor you should use. If you're the type of person who likes using the original version of a program, then Pico is the editor for you. If you don't mind sacrificing mailer integration with Pine, and are looking for a few more features, as well as a 'better' license in terms of adding your own changes, nano is the way to go.</p><p>Note that the last of these no longer applies to the new version of Pine, <ahref="http://www.washington.edu/alpine/">Alpine</a>, which is under the Apache License, version 2.0.</p></blockquote>
<h2><aname="6.3"></a>6.3. What is so bad about the older Pine license?</h2>
<blockquote><p>The U of W license for older versions of Pine and Pico is not considered truly Free Software according to both the Free Software Foundation and the <ahref="http://www.debian.org/social_contract#guidelines">Debian Free Software Guidelines</a>. The main problem regards the limitations on distributing derived works: according to UW, you can distribute their software, and you can modify it, but you can not do both, i.e. distribute modified binaries.</p></blockquote>
<h2><aname="6.4"></a>6.4. Okay, well, what mail program should I use then?</h2>
@@ -246,17 +248,20 @@ Of course, due to the license change you can now use the <A HREF="http://www.was
<h2><aname="7.2"></a>7.2. I want to send the development team a big load of cash (or just a thank you).</h2>
<blockquote><p>That's fine. Send it <ahref="mailto:nano-devel@gnu.org">our way</a>! Better yet, fix a <ahref="https://savannah.gnu.org/bugs/?group=nano">bug</a> in the program or implement a <ahref="http://www.nano-editor.org/dist/v2.3/TODO">cool feature</a> and send us that instead (though cash is fine too).</p></blockquote>
<blockquote><p>That's fine. Send it <ahref="mailto:nano-devel@gnu.org">our way</a>! Better yet, fix a <ahref="https://savannah.gnu.org/bugs/?group=nano">bug</a> in the program or implement a <ahref="https://nano-editor.org/dist/latest/TODO">cool feature</a> and send us that instead (though cash is fine too).</p></blockquote>
<h2><aname="7.3"></a>7.3. How do I submit a bug report or patch?</h2>
<blockquote>
<p>The best place to submit bugs is to the <ahref="https://savannah.gnu.org/bugs/?group=nano">Savannah bug tracker</a> as you can check whether the bug you are submitting has already been submitted.
<p>Please submit patches for nano via the <ahref="https://savannah.gnu.org/patch/?group=nano">Savannah project's patch manager</a> for the nano project.</p></blockquote>
<h2><aname="7.4"></a>7.4. How do I join the development team?</h2>
<blockquote><p>The easiest way is to consistently send in good patches that add some needed functionality, fix a bug or two, and/or make the program more optimized/efficient. Then ask nicely and you will probably be added to the Savannah development list and be given SVN write access after a while. There is a lot of responsibility that goes along with being a team member, so don't think it's just something to add to your resume.</p></blockquote>
<h2><aname="7.5"></a>7.5. Can I have write access to the subversion tree?</h2>
<blockquote><p>The easiest way is to consistently send in good patches that add some needed functionality, fix a bug or two, and/or make the program more optimized/efficient. Then ask nicely and you will probably be added to the Savannah development list and be given write access after a while. There is a lot of responsibility that goes along with being a team member, so don't think it's just something to add to your resume.</p></blockquote>
<h2><aname="7.5"></a>7.5. Can I have write access to the git tree?</h2>
<blockquote><p>Re-read Section <ahref="#7.4">7.4</a> and you should know the answer.</p></blockquote>
<h2><aname="8"></a>8. ChangeLog</h2>
<blockquote><p>2014/04/24 - A bunch of small fixes and updates. (Benno)<br>
<blockquote><p>
2016/04/17 - Update docs to refer to GIT instead of subversion. (Mike)<br>
2015/07/18 - More small fixes and updates. (Benno)<br>
2014/04/24 - A bunch of small fixes and updates. (Benno)<br>
2009/11/30 - Update various bits for nano 2.2.x. (DLR)<br>
2009/11/18 - Typo fix. (j.mader@gmail.com)<br>
2008/03/16 - Update docs to refer to subversion instead of CVS, add more words about Alpine, and refer to Savannah for bugs and patches. (chrisa)<br>
@@ -322,6 +327,5 @@ Of course, due to the license change you can now use the <A HREF="http://www.was
2000/11/18 - Previous string display (4.5).<br>
2000/09/27 - Moved addresses to nano-editor.org.<br>
color red "\<(accept|alarm|atan2|bin(d|mode)|c(aller|h(dir|mod|op|own|root)|lose(dir)?|onnect|os|rypt)|d(bm(close|open)|efined|elete|ie|o|ump)|e(ach|of|val|x(ec|ists|it|p))|f(cntl|ileno|lock|ork))\>" "\<(get(c|login|peername|pgrp|ppid|priority|pwnam|(host|net|proto|serv)byname|pwuid|grgid|(host|net)byaddr|protobynumber|servbyport)|([gs]et|end)(pw|gr|host|net|proto|serv)ent|getsock(name|opt)|gmtime|goto|grep|hex|index|int|ioctl|join)\>" "\<(keys|kill|last|length|link|listen|local(time)?|log|lstat|m|mkdir|msg(ctl|get|snd|rcv)|next|oct|open(dir)?|ord|pack|pipe|pop|printf?|push|q|qq|qx|rand|re(ad(dir|link)?|cv|do|name|quire|set|turn|verse|winddir)|rindex|rmdir|s|scalar|seek(dir)?)\>" "\<(se(lect|mctl|mget|mop|nd|tpgrp|tpriority|tsockopt)|shift|shm(ctl|get|read|write)|shutdown|sin|sleep|socket(pair)?|sort|spli(ce|t)|sprintf|sqrt|srand|stat|study|substr|symlink|sys(call|read|tem|write)|tell(dir)?|time|tr(y)?|truncate|umask)\>" "\<(un(def|link|pack|shift)|utime|values|vec|wait(pid)?|wantarray|warn|write)\>"
color magenta "\<(continue|else|elsif|do|for|foreach|if|unless|until|while|eq|ne|lt|gt|le|ge|cmp|x|my|sub|use|package|can|isa)\>"
## NOTE: Rules are applied in order: later rules re-colorize matching text.
syntax "rust" "\.rs"
comment "//"
# Function definitions
color magenta "fn [a-z_0-9]+"
# Reserved words
color yellow "\<(abstract|alignof|as|become|box|break|const|continue|crate|do|else|enum|extern|false|final|fn|for|if|impl|in|let|loop|macro|match|mod|move|mut|offsetof|override|priv|pub|pure|ref|return|sizeof|static|self|struct|super|true|trait|type|typeof|unsafe|unsized|use|virtual|where|while|yield)\>"
# Macros
color red "[a-z_]+!"
# Constants
color magenta "[A-Z][A-Z_0-9]+"
# Traits/Enums/Structs/Types/...
color magenta "[A-Z][A-Za-z0-9]+"
# Strings
color green "\".*\""
color green start="\".*\\$" end=".*\""
## NOTE: This isn't accurate, but matching "#{0,} for the end of the string is too liberal.
color green "\<(after|append|array|auto_execok|auto_import|auto_load|auto_load_index|auto_qualify|binary|break|case|catch|cd|clock|close|concat|continue|encoding|eof|error|eval|exec|exit|expr|fblocked|fconfigure|fcopy|file|fileevent|flush|for|foreach|format|gets|glob|global|history|if|incr|info|interp|join|lappend|lindex|linsert|list|llength|load|lrange|lreplace|lsearch|lset|lsort|namespace|open|package|pid|puts|pwd|read|regexp|regsub|rename|return|scan|seek|set|socket|source|split|string|subst|switch|tclLog|tell|time|trace|unknown|unset|update|uplevel|upvar|variable|vwait|while)\>"
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
