GNU nano 1.1.9 release

git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@1211 35c25a1d-7b9e-4130-9fde-d3aeb78583b8

.cvsignore

@@ -1,10 +1,23 @@
 Makefile
 Makefile.in
+aclocal.m4
+autom4te.cache
 confdefs.h
 config.cache
 config.h
+config.h.in
 config.log
 config.status
 configure
+config.guess
+config.sub
+depcomp
+install-sh
+missing
+mkinstalldirs
 nano
+nano.info
+nano.spec
 stamp-h
+stamp-h.in
+stamp-h1

ABOUT-NLS

@@ -8,7 +8,7 @@ A few packages already provide translations for their messages.
 
    If you found this `ABOUT-NLS' file inside a distribution, you may
 assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site.  But you do *not*
+itself available at your nearest GNU archive site.  But you do _not_
 need to install GNU `gettext' prior to configuring, installing or using
 this package with messages translated.
 
@@ -22,8 +22,8 @@ related to internationalization, you should tell about the version of
 `gettext' which is used.  The information can be found in the
 `intl/VERSION' file, in internationalized packages.
 
-One advise in advance
-=====================
+Quick configuration advice
+==========================
 
    If you want to exploit the full power of internationalization, you
 should configure it using
@@ -34,13 +34,14 @@ to force usage of internationalizing routines provided within this
 package, despite the existence of internationalizing capabilities in the
 operating system where this package is being installed.  So far, only
 the `gettext' implementation in the GNU C library version 2 provides as
-many features (such as locale alias or message inheritance) as the
-implementation here.  It is also not possible to offer this additional
-functionality on top of a `catgets' implementation.  Future versions of
-GNU `gettext' will very likely convey even more functionality.  So it
-might be a good idea to change to GNU `gettext' as soon as possible.
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation.  Future versions of GNU `gettext' will
+very likely convey even more functionality.  So it might be a good idea
+to change to GNU `gettext' as soon as possible.
 
-   So you need not provide this option if you are using GNU libc 2 or
+   So you need _not_ provide this option if you are using GNU libc 2 or
 you have installed a recent copy of the GNU gettext package with the
 included `libintl'.
 
@@ -53,23 +54,20 @@ Most such packages use GNU `gettext'.  Other packages have their own
 ways to internationalization, predating GNU `gettext'.
 
    By default, this package will be installed to allow translation of
-messages.  It will automatically detect whether the system provides
-usable `catgets' (if using this is selected by the installer) or
-`gettext' functions.  If neither is available, the GNU `gettext' own
+messages.  It will automatically detect whether the system already
+provides the GNU `gettext' functions.  If not, the GNU `gettext' own
 library will be used.  This library is wholly contained within this
 package, usually in the `intl/' subdirectory, so prior installation of
-the GNU `gettext' package is *not* required.  Installers may use
+the GNU `gettext' package is _not_ required.  Installers may use
 special options at configuration time for changing the default
 behaviour.  The commands:
 
      ./configure --with-included-gettext
-     ./configure --with-catgets
      ./configure --disable-nls
 
-will respectively bypass any pre-existing `catgets' or `gettext' to use
-the internationalizing routines provided within this package, enable
-the use of the `catgets' functions (if found on the locale system), or
-else, *totally* disable translation of messages.
+will respectively bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
 
    When you already have GNU `gettext' installed on your system and run
 configure without an option for your new package, `configure' will
@@ -83,18 +81,10 @@ package is more recent, you should use
 
 to prevent auto-detection.
 
-   By default the configuration process will not test for the `catgets'
-function and therefore they will not be used.  The reasons are already
-given above: the emulation on top of `catgets' cannot provide all the
-extensions provided by the GNU `gettext' library.  If you nevertheless
-want to use the `catgets' functions use
-
-     ./configure --with-catgets
-
-to enable the test for `catgets' (this causes no harm if `catgets' is
-not available on your system).  If you really select this option we
-would like to hear about the reasons because we cannot think of any
-good one ourself.
+   The configuration process will not test for the `catgets' function
+and therefore it will not be used.  The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
 
    Internationalized packages have usually many `po/LL.po' files, where
 LL gives an ISO 639 two-letter code identifying the language.  Unless
@@ -110,22 +100,35 @@ Using This Package
 
    As a user, if your language has been installed for this package, you
 only have to set the `LANG' environment variable to the appropriate
-ISO 639 `LL' two-letter code prior to using the programs in the
-package.  For example, let's suppose that you speak German.  At the
-shell prompt, merely execute `setenv LANG de' (in `csh'),
-`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash').  This
-can be done from your `.login' or `.profile' file, once and for all.
+`LL_CC' combination.  Here `LL' is an ISO 639 two-letter language code,
+and `CC' is an ISO 3166 two-letter country code.  For example, let's
+suppose that you speak German and live in Germany.  At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
 
-   An operating system might already offer message localization for
-many of its programs, while other programs have been installed locally
-with the full capabilities of GNU `gettext'.  Just using `gettext'
-extended syntax for `LANG' would break proper localization of already
-available operating system programs.  In this case, users should set
-both `LANGUAGE' and `LANG' variables in their environment, as programs
-using GNU `gettext' give preference to `LANGUAGE'.  For example, some
-Swedish users would rather read translations in German than English for
-when Swedish is not available.  This is easily accomplished by setting
-`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'.
+   You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries.  For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil.  The
+country code serves to distinguish the dialects.
+
+   Not all programs have translations for all languages.  By default, an
+English message is shown in place of a nonexistent translation.  If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'.  GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries.  For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+   In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect.  For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
 
 Translating Teams
 =================
@@ -133,33 +136,21 @@ Translating Teams
    For the Free Translation Project to be a success, we need interested
 people who like their own language and write it well, and who are also
 able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list, courtesy of Linux
-International.  You may reach your translation team at the address
-`LL@li.org', replacing LL by the two-letter ISO 639 code for your
-language.  Language codes are *not* the same as the country codes given
-in ISO 3166.  The following translation teams exist, as of December
-1997:
+Each translation team has its own mailing list.  The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
+area.
 
-     Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en',
-     Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian
-     `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja',
-     Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish
-     `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es',
-     Swedish `sv', and Turkish `tr'.
-
-For example, you may reach the Chinese translation team by writing to
-`zh@li.org'.
-
-   If you'd like to volunteer to *work* at translating messages, you
+   If you'd like to volunteer to _work_ at translating messages, you
 should become a member of the translating team for your own language.
-The subscribing address is *not* the same as the list itself, it has
+The subscribing address is _not_ the same as the list itself, it has
 `-request' appended.  For example, speakers of Swedish can send a
 message to `sv-request@li.org', having this message body:
 
      subscribe
 
    Keep in mind that team members are expected to participate
-*actively* in translations, or at solving translational difficulties,
+_actively_ in translations, or at solving translational difficulties,
 rather than merely lurking around.  If your team does not exist yet and
 you want to start one, or if you are unsure about what to do or how to
 get started, please write to `translation@iro.umontreal.ca' to reach the
@@ -173,42 +164,128 @@ Available Packages
 ==================
 
    Languages are not equally supported in all packages.  The following
-matrix shows the current state of internationalization, as of December
-1997.  The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination.
+matrix shows the current state of internationalization, as of September
+2001.  The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
 
-     Ready PO files    cs da de en es fi fr it ja ko nl no pl pt ru sl sv
-                     .----------------------------------------------------.
-     bash            |       []          []          []                   |  3
-     bison           |       []          []          []                   |  3
-     clisp           |       [] [] []    []                               |  4
-     cpio            |       []    []    []       [] []    []             |  6
-     diffutils       |       []    []    []                []          [] |  5
-     enscript        |       []    [] [] []          []             []    |  6
-     fileutils       | []    []    []    []       [] []    [] []    [] [] | 10
-     findutils       |       []    []    [] []    [] []    []    []    [] |  9
-     flex            |             []    []       []                   [] |  4
-     gcal            |       []          []          []    []          [] |  5
-     gettext         |    [] []    []    []       [] [] [] [] []    [] [] | 12
-     grep            |       []    []    []       [] [] [] []    [] [] [] | 10
-     hello           |    [] []    []    []       [] [] [] [] []    [] [] | 11
-     id-utils        |       []          []                []             |  3
-     indent          |    [] []                   []       []    []       |  5
-     libc            |       []    []    []       [] []    []          [] |  7
-     m4              |       []          []    []    []          []    [] |  6
-     make            |       []    []    []       [] []    []             |  6
-     music           |                   []                []             |  2
-     ptx             |       []    []    []          [] [] [] []       [] |  8
-     recode          |    [] []    []    []          []    [] []    [] [] |  9
-     sh-utils        |       []    []    []          [] [] [] []       [] |  8
-     sharutils       | []    []    []    []          []                [] |  6
-     tar             | []    []          [] []    [] [] [] [] []    [] [] | 11
-     texinfo         | []    []          []                               |  3
-     textutils       | []    []    []    []       [] [] [] []          [] |  9
-     wdiff           | []    []    []    []          [] [] []          [] |  8
-                     `----------------------------------------------------'
-       17 languages    cs da de en es fi fr it ja ko nl no pl pt ru sl sv
-       27 packages      6  4 25  1 18  1 26  2  1 12 20  9 19  7  4  7 17  179
+     Ready PO files    bg cs da de el en eo es et fi fr gl he hr id it ja
+                     +----------------------------------------------------+
+     a2ps            |          []             []    []                   |
+     bash            |          []       [] []       []                   |
+     bfd             |                                                    |
+     binutils        |                               []                   |
+     bison           |          []          [] []    []                [] |
+     clisp           |          []    []    []       []                   |
+     cpio            |       [] []          []       [] []                |
+     diffutils       |       [] []       [] []       [] []       []       |
+     enscript        |          []                   []                   |
+     error           |                      []       []                   |
+     fetchmail       |                                                    |
+     fileutils       |    [] [] [] []       []       [] []             [] |
+     findutils       |       [] []          [] []    [] []       [] []    |
+     flex            |       []             []       []                   |
+     freetype        |                                                    |
+     gas             |                                                    |
+     gawk            |                               []    []             |
+     gcal            |                                                    |
+     gcc             |                                                    |
+     gettext         |    [] [] [] []       []       [] []       [] [] [] |
+     gnupg           |          []       []    []    [] []          [] [] |
+     gprof           |                                                    |
+     grep            |    []    []       [] [] []    [] []          []    |
+     hello           |       [] [] []    [] [] [] [] [] []          [] [] |
+     id-utils        |       [] []                   []                   |
+     indent          |       [] []             []    [] []                |
+     jpilot          |                               []                   |
+     kbd             |                                                    |
+     ld              |                               []                   |
+     libc            |    [] [] [] []       []       [] []             [] |
+     lilypond        |                                                 [] |
+     lynx            |    [] [] []                                     [] |
+     m4              |    [] [] [] []                [] []       []    [] |
+     make            |       [] []          []       [] []             [] |
+     mysecretdiary   |          []                                        |
+     nano            |                      []          []       []       |
+     opcodes         |                                                    |
+     parted          |          []                      []             [] |
+     ptx             |       [] []          [] []    [] []       []       |
+     python          |                                                    |
+     recode          |       [] [] []    [] []       [] [] []       []    |
+     sed             |    [] [] [] []    []    []    [] [] []    [] [] [] |
+     sh-utils        |    [] [] [] []       [] []    [] []          [] [] |
+     sharutils       |    [] [] [] []       []       [] []             [] |
+     sketch          |                                                    |
+     soundtracker    |          []          []          []                |
+     sp              |                                                    |
+     tar             |    [] [] []          [] []    []             [] [] |
+     texinfo         |    [] [] []       []          []                [] |
+     textutils       |    [] [] [] []       []       [] []             [] |
+     util-linux      |    [] []                                           |
+     wdiff           |       [] []             []                         |
+     wget            |    [] [] [] []       [] []    [] [] []          [] |
+                     +----------------------------------------------------+
+                       bg cs da de el en eo es et fi fr gl he hr id it ja
+                        0 14 24 32 11  1  8 23 13  1 33 22  4  0  7  9 18
+     
+                       ko lv nb nl nn no pl pt pt_BR ru sk sl sv tr uk zh
+                     +----------------------------------------------------+
+     a2ps            |          []                   []    []             |  6
+     bash            |                                                    |  4
+     bfd             |                                                    |  0
+     binutils        |                                                    |  1
+     bison           |                               []                   |  6
+     clisp           |          []                                        |  5
+     cpio            | []       []       []     []   []                   | 10
+     diffutils       |                   []          []       [] []       | 11
+     enscript        |          []              []   []                   |  5
+     error           |                                  []       []       |  4
+     fetchmail       |                                                    |  0
+     fileutils       | []       []       []     []   [] [] [] [] []       | 17
+     findutils       | []       []       []     []   []    [] [] []       | 16
+     flex            | []                            []       []          |  6
+     freetype        |                                                    |  0
+     gas             |                                                    |  0
+     gawk            |                                           []       |  3
+     gcal            |                                                    |  0
+     gcc             |                                                    |  0
+     gettext         | []                []     []   []    [] [] []    [] | 18
+     gnupg           |                   []                   [] []       | 10
+     gprof           |                                                    |  0
+     grep            |                   []                [] [] []       | 12
+     hello           | [] [] [] []    [] []          [] []    [] [] []    | 22
+     id-utils        |          []                   []       []          |  6
+     indent          | []       []       []          [] []    [] []       | 12
+     jpilot          |                                                    |  1
+     kbd             |                                           []       |  1
+     ld              |                                                    |  1
+     libc            | []    []       [] []     []      []    [] []       | 16
+     lilypond        |          []                            []          |  3
+     lynx            |          []              []   []       []          |  8
+     m4              |          []       []          []       []          | 12
+     make            | []       []       []     []   []          []       | 12
+     mysecretdiary   |                                                    |  1
+     nano            |                                        []          |  4
+     opcodes         |                                           []       |  1
+     parted          |          []                   []                   |  5
+     ptx             |       [] []    [] [] []       []       [] []       | 15
+     python          |                                                    |  0
+     recode          |                   []          []    [] []          | 13
+     sed             |          []              []   [] [] [] [] []       | 19
+     sh-utils        |       [] []    [] []     []   [] [] [] [] []    [] | 21
+     sharutils       |          []                   []       []          | 11
+     sketch          |                                                    |  0
+     soundtracker    |                                                    |  3
+     sp              |                                                    |  0
+     tar             |       []       [] []     []         [] [] []       | 15
+     texinfo         |                               []                   |  7
+     textutils       |       [] []    [] []     []   [] [] []             | 16
+     util-linux      |                          []               []       |  4
+     wdiff           |                               [] []    [] []       |  7
+     wget            |          []                   [] [] [] [] [] []    | 17
+                     +----------------------------------------------------+
+       33 teams        ko lv nb nl nn no pl pt pt_BR ru sk sl sv tr uk zh
+       53 domains       9  1  6 20  0  6 17  1  13   25 10 11 23 21  2  2  387
 
    Some counters in the preceding matrix are higher than the number of
 visible blocks let us expect.  This is because a few extra PO files are
@@ -221,7 +298,27 @@ distributed as such by its maintainer.  There might be an observable
 lag between the mere existence a PO file and its wide availability in a
 distribution.
 
-   If December 1997 seems to be old, you may fetch a more recent copy
-of this `ABOUT-NLS' file on most GNU archive sites.
+   If September 2001 seems to be old, you may fetch a more recent copy
+of this `ABOUT-NLS' file on most GNU archive sites.  The most
+up-to-date matrix with full percentage details can be found at
+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
+
+Using `gettext' in new packages
+===============================
+
+   If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package.  Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library.  This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+   Once the sources are changed appropriately and the setup can handle
+to use of `gettext' the only thing missing are the translations.  The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project.  Therefore the information given above
+applies also for every other Free Software Project.  Contact
+`translation@iro.umontreal.ca' to make the `.pot' files available to
+the translation teams.
 
-$Id$

AUTHORS

@@ -24,3 +24,8 @@ Rocco Corsi <rocco.corsi@sympatico.ca>
 	* Internal spelling code, many optimizations and bug fixes for 
 	  findnextstr and search-related functions, various display and
 	  file handling fixes.
+
+David Lawrence Ramsey <pooka_regent@sluggy.net>
+	* Multiple buffer support, operating dir (-o) option, bug fixes
+	  for display routines, wrapping code, spelling fixes, const
+	  mode and various other fixes.

BUGS

@@ -71,7 +71,7 @@
   [FIXED]
 - Alt-Z is currently broken to toggle suspend.  I guess I still don't know
   signals very well =-) (41) [FIXED].
-- Unable to cut the entire file using the marker (discovered by Kev Tyler)
+- Unable to cut the entire file using the marker (discovered by Ken Tyler)
   (42). [FIXED]
 - The keypad does not work when nano runs in the Gnome terminal (43). [FIXED]
 - When reading in a file, if the file is a directory, the contents of the
@@ -127,7 +127,11 @@
 - When cutting marked text including the bottom of the file, a new   
   "magic line" is not created" (reported by David Lawrence
   Ramsey, fixed by David Lawrence Ramsey & Chris) (66) [FIXED].
-
+- ^C does not work after a suspend in tcsh (discovered by
+  Trevor Cordes) (68) [FIXED].
+- Home and End control keys (^A, ^E) do not always work in filename
+  prompt (bug found by Ian Turner) (69) [1.0 series only] [FIXED].
+- Trying to insert a file of 0 bytes will hang nano (70) [FIXED].
 ** Open BUGS **
 
 $Id$

ChangeLog

@@ -1,3 +1,605 @@
+GNU nano 1.1.9 - 05/12/2002
+- General:
+	- Typos n misspellings all over the place (David Benbennick).
+	- Allow --tiny and --multibuffer to cooperate (who the heck
+	  would want this is beyond me but ;-).  Changes to 
+	  configure.ac, global.c, ,  (David Benbennick).
+	- Change to openfilestruct for multibuffer mode by DLR.
+	  New functions nano.c:make_new_opennode(), free_openfilestruct(), 
+	  delete_opennode(), unlink_opennode(), splice_opennode(),  
+	  new struct openfilestruct in nano.h. 
+	- Preliminary prepend code.  This may be a bad idea, but I've
+	  been wanting it for awhile now and we'll see how bad it messes
+	  everything up.  Changes to files.c:do_writeout(), write_file().
+	  Fixes for O_CREAT & append compatibililty by David Benbennick.
+	- Change from read() and write() to file streams by Jay Carlson.
+	  Allows OS to implement read and write ahead rather than making
+	  us do it.  Hopefully merged properly.
+	- More cleanups with DISABLE flags, better free_shortcutage and
+	  free_toggle, and get rid of unnecessary variable decls with 
+	  NANO_SMALL in shortcut_init() by David Benbennick.
+	- Added "syntax" command to .nanorc file, to allow multiple 
+	  syntaxes.  New function color.c:update_color(), calls in various
+	  files.c places, syntaxtype struct, global variables syntaxes,
+	  syntaxfile_regexp and synfilematches.  Global flag -Y ,--syntax
+	  to specify the type on the command line, if there's no good 
+	  filename regex to use.  Global variable syntaxstr.
+	- Changed many strcmp()s and strcpy()s to their equivalent
+	  '\0' conterparts (David Lawrence Ramsey).
+	- Many chanes to allow marked cutting to work with multiple
+	  file buffers: changes to openfilestruct type in nano.h and
+	  files.c (David Lawrence Ramsey).
+	- Changed NANO_SMALL to ENABLE_NLS for gettext disabling 
+	  (David Benbennick).
+	- Move next_key and pev_key definitions out of main() and into
+	  global.c where they belong (David Benbennick).
+- color.c:
+  update_color()
+	- Add regfree call here to avoid memory leaks.
+- configure.ac:
+	- Define NDEBUG to silence asserts (David Benbennick).
+- files.c:
+  get_next_filename()
+	- Optimizations (David Benbennick).
+- global.c:
+  shortcut_init()
+	- Add missing free_shortcutage()s (David Benbennick).
+  thanks_for_all_the_fish()
+	- Only defined when using DEBUG, makes sense (David Benbennick).
+- nano.c:
+  die_save_file()
+	- Add missing free (David Benbennick).
+  do_justify()
+	- Optimizations (David Benbennick).
+  do_wrap()
+	- Complete rewrite (David Benbennick).
+  help_init()
+	- A little les readable, a lot shorer :-) (David Benbennick).
+	- Fix Meta-A not getting capitalized, and convert the ASCII
+	  #s to their character equivalent.
+  main()
+	- Changed charalloc(), strcpy()s to mallocstrcpy()s.
+- nano.h:
+	- NANO_ALT_COMMAND and NANO_ALT_PERIOD were reversed (lol)
+	  (David Benbennick).
+- nano.spec.in:
+	- Don't put Chris' name as the Packager in the distribution
+	  by default (Im an idiot).
+	- Fixed Source line (David Lawrence Ramsey).
+- nano.1:
+	- Changed references to Debian GNU/Linux to Debian GNU (Jordi).
+- nano.1.html:
+	- Updated for -Y option (David Lawrence Ramsey).
+- rcfile.c:
+	- Made some rc file errors less fatal.
+	- Added in my patch for getpwent instead of relying on $HOME
+	  (David Lawrence Ramsey).
+- winio.c:
+  edit_add()
+	- Changed some syntax hilight computations for the sake of COLS.
+	- Add in the necessary regfree() calls to stop nano from leaking
+	  memory like a sieve when using color syntax highlighting :-)
+  botombars(), onekey()
+	- Cleanups (David Benbennick).
+- po/gl.po:
+	- Galician translation updates (Jacobo Tarrio).
+- po/de.po:
+	- German translation updates (Michael Piefel).
+- po/fr.po:
+	- French translation updates (Jean-Philippe Guérard).
+- po/ca.po, po/es.po:
+	- Catalan and Spanish translation updates (Jordi).
+- po/sv.po:
+	- Swedish translation updates (Christian Rose).
+- po/nl.po:
+	- Dutch translation updates (Guus Sliepen).
+- po/it.po:
+	- Italian translation updates (Marco Colombo).
+- po/ru.po, po/uk.po:
+	- Russian and Ukrainian translation updates (Sergey A. Ribalchenko).
+- po/id.po:
+	- Indonesian translation updates (Tedi Heriyanto).
+- po/sv.po:
+	- Swedish translation updates (Christian Rose).
+GNU nano 1.1.8 - 03/30/2002
+- General
+	- Type misalignments and mem leaks in renumber_all, do_justify
+	  and do_spell (Rocco & Steven Kneizys).
+	- New "External Command" code, originally by Dwayne Rightler,
+	  various fixes and changes by Chris, Rocco and David Benbennick. 
+	  New function nano.c:open_pipe() and signal handler cancel_fork(), 
+	  changes to do_insertfile(), new list extcmd_list, cmd is 
+	  ^X after ^R.
+	- Added separate regex variable (color_regex and colormatches)
+	  so that color syntax and regex search/replace can coexist.
+	- Added new nano.spec file from Brett <brett@bad-sports.com>, 
+	  added because maintaining the spec file is getting to be a large 
+	  hassle ;)
+- files.c:
+  check_writable_directory()
+	- Stat full_path, not path (Steven Kneizys).
+  open_pipe()
+	- I18nize the pipe error (DLR).
+  do_insertfile()
+	- Handle cancel from ExtCmd properly (David Benbennick).
+  read_file()
+	- Abort if we read a file of 0 lines (num_lines == 0), fixes BUG #70.
+	- Reverse tests to stop segfault on editing a new file of 0 
+	  lines (David Benbennick)
+	- Change input var to one char instead of array (David Benbennick).
+	- Move NO_CONVERT check up so chars get read in properly (DLR).
+- nano.c:
+  do_justify()
+	- More fixes for indented justify (David Benbennick).
+  do_int_speller()
+	- Fix zombie processes and spelling buffer issues (Rocco Corsi).
+  help_init()
+	- Capitalize Meta altkeys.
+	- Various fixes and string changes.
+  main()
+	- Put NANO_SMALL defines around toggle pointer (noticed by Jordi);
+  usage()
+	- Rewritten to encompass systems with and without GETOPT_LONG.
+	  New function print1opt does most of the dirty work, stops
+	  duplication of effort and eases translator's jobs.  Also
+	  breaks all the current translations ;-)
+- proto.h:
+	- Missing externs (Rocco).
+- rcfile.c:
+  do_rcfile()
+	- Reset lineno between system and local .nanorc file.
+	- Fix errno->strerror(errno) mismatch.
+  parse_rcfile()
+	- Don't use i for both for loop and atoi(), fixes lots of 
+	  potential crashes, 1st reported by Jean-Philippe Guérard.
+  rcfile_error()
+	- Don't print out the file name if we haven't opened the file
+	 yet (lineno == 0).
+- search.c:
+  search_init()
+	- Fix a missing free (Rocco).
+  do_gotoline() 
+	- Set placewewant if we actually move to a different line.
+- utils.c:
+  stristr() 
+	- Defined regardless of NANO_SMALL (noticed by Jordi).
+  nperror()
+	- New wrapper for perror (David Benbennick).
+- winio.c:
+  do_credits()
+	- Add Thomas Dickey.
+  do_cursorpos()
+	- Make col numbering start from 1 (suggested by Andrew Ho).
+  update_line(), xpt()
+	- Add check for 127 (DLR).
+- po/sv.po:
+	- Swedish translation updates (Christian Rose).
+- po/de.po:
+	- German translation updates (Michael Piefel).
+- po/id.po:
+	- Indonesian translation updates (Tedi Heriyanto).
+- po/it.po:
+	- Serious typo.
+- po/ca.po, po/es.po:
+	- Catalan and Spanish translation updates (Jordi).
+	- Typo (DLR).
+- po/fr.po:
+	- French translation updates (Jean-Philippe Guérard).
+- po/gl.po:
+	- Galician translation updates (Jacobo Tarrio).
+- po/uk.po, po/ru.po:
+	- Russian and Ukrainian translation updates (Sergey A. Ribalchenko).
+- po/pl.po:
+	- Polish translation updates (Wojciech Kotwica).
+- po/fr.po:
+	- French translation updates (Jean-Philippe Guérard).
+- po/it.po:
+	- Italian translation updates (Marco Colombo).
+- po/da.po:
+	- Danish translation updates (Keld Simonsen).
+	  
+GNU nano 1.1.7 - 03/05/2002
+- General
+	- malloc->calloc, etc cleanups (DLR).
+	- New option, noconvert (-N, --noconvert) to completely stop
+	  the translation of files from DOS or Mac format (DLR).
+	- New functions wheck_writable_directory() and safe_tempnam()
+	  to get around the tempnam warning. More improvements (DLR)  
+	  Still needs testing.
+	- Added DOS and Mac format options to write file routine.
+	  Changes to shortcut_init() and do_writeout().	
+	- Removed stupid static definitions of toggles and shortcut
+	  lists.  Many changes to shortcut_init(), toggle_init(),
+	  statusq(), nanogetstr(), main(), and many other places.
+	- Multibuffer mode now allows multiple empty filenames.  
+	  Changes to add_open_files(), removed open_file_dup_search(),
+	  open_file_dup_fix(), etc (DLR).
+	- New code to handle multiple .save files.  Changes to 
+	  die_save_file(), new function files.c:get_next_filename()
+	  and utils.c:num_of_digits(). (Dwayne Rightler, DLR & Chris)
+	- Many malloc() cleanups and files.c tweaks by Steven Kneizys,
+	  new functions utils.c:free_shortcutage() (got to love that
+	  name!) & free_toggles(), and big cleanup program 
+	  thanks_for_all_the_fish() (originally 
+	  thanks_for_the_memories()).  Mods to shortcut_init() by Chris.
+	- Preliminary quoting support for justify.  New arg -Q, --quotestr,
+	  changes to do_justify(), global variable quotestr().
+- Makefile.am:
+	- Add SYSCONFDIR to DEFS, so we can have an /etc/nanorc.
+	- Change localedir line to 1.0's version.
+	- Moved m4/ stuff to its own m4/Makefile.am.
+- m4/aclocal_inc.m4:
+	- New macro AM_ACLOCAL_INCLUDE, tells configure.ac where to look for
+	  macros (Gergely Nagy).
+- configure.in:
+	- Renamed to configure.ac.
+- configure.ac:
+	- Moved to autoconf 2.52 (Jeff Bailey).
+	- Added call to AM_ACLOCAL_INCLUDE.
+- files.c:
+  read_byte()
+	- Added check for conrol characters (indicative of a binary 
+	  file), set NO_CONVERT if found (fixes by DLR).
+ do_insertfile()
+	- Added support for -o in prompt (Steven Kneizys).
+- global.c:
+	- Move openprev and opennext functions to shortcuts, they really
+	  aren't toggles (DLR).
+- rcfile.c:
+  parse_next_regex()
+	- Allow " symbol to be in regex without leading \ by checking
+	  for *ptr+1 is not the end of the regex.
+  do_rcfile()
+	- Parse rcfile in $SYSCONFDIR as well (Dwayne Rightler).
+- nano.1:
+	- Added Noconvert option to man page (DLR).
+- nano.c:
+  justify_format(), do_justify()
+        - Various fixes for starting blank spaces, spaces after
+          punctuation, & segfault with quoting strings (David Benbennick).
+  do_justify()
+	- Don't continue to justify string if it's indented more 
+	  (quoting wise) than the beginning of the justification.
+  help_init()
+	- Added message re: having multiple blank buffers (DLR).
+  main()
+	- Add 407 as equiv of 26, this seems to be sent when using
+	  ^Z in linux console with keypad() enabled.
+- rcfile.c:
+	- Get rid of unneeded relativechars from rcopts (DLR).
+- search.c
+  do_replace(), findnextstr()
+	- Fixes for various search issues (Ken Tyler)
+- winio.c:
+  do_cursorpos()
+	- Rewritten to show col place as well as charcter place, without
+	  needing an entirely separate flag.
+  bottombars(), onekey()
+	- Make bottom list dynamic with screen size (Guus Sliepen & Chris).
+	- More cleanups w/width of shortcut.
+- utils.c:
+  strcasestr(),revstrcasestr()
+	- Renamed to stristr and revstristr since strcasestr has not
+	  been confirmed to be detected properly on various Linux
+	  systems.
+  strstrwrapper()
+	- NANO_SMALL test was backwards (Ken Tyler).
+- winio.c:
+  strlenpt()    
+        - Changed main function to strnlenpt() for new justify changes,
+          original function now just a stub.
+- nanorc.sample
+	- Mention unset in the sample nanorc.
+- po/ca.po, po/es.po:
+	- Catalan and Spanish translation updates (Jordi).
+- po/sv.po:
+	- Swedish translation updates (Christian Rose).
+- po/fr.po:
+	- French translation updates (Jean-Philippe Guérard).
+- po/nn.po:
+	- Norwegian nynorsk translation updates (Kjetil Torgrim Homme).
+- po/de.po:
+	- German translation updates (Michael Piefel).
+- po/it.po:
+	- Italian translation updates (Marco Colombo).
+- po/cs.po:
+	- Partial Czech translation updates (Vaclav Haisman).
+- po/hu.po:
+	- Hungarian translation updates, or to be precise, rewrite
+	  (Gergely Nagy).
+- po/uk.po, po/ru.po:
+	- Russian and Ukrainian translation updates (Sergey A. Ribalchenko).
+- po/da.po:
+	- Danish translation updates (Keld Simonsen).
+- po/nb.po:
+	- Norwegian bokmål translation updates (Stig E Sandoe).
+- po/nl.po:
+	- Dutch translation updates (Guus Sliepen).
+- po/pl.po:
+	- Polish translation updates (Wojciech Kotwica).
+
+nano-1.1.6 - 01/25/2002
+- General
+	- Add Meta-A as alternate keyystroke for ^^ for people with
+	  non-US keyboards.
+	- Add Alt-G (NANO_ALT_GOTO_KEY) as alternate for goto dir in 
+	  browser.
+	- Better partial word checking code. New function 
+	  search.c:is_whole_word(), changes to findnextstr(), 
+	  and nano.c:do_int_spell_fix() (Rocco Corsi).
+	- Added multiple-line regex support.  Format in .nanorc is
+	  start="regex" end="regex".  Cleaned up nanorc:parse_colors(),
+	  added parse_next_regex(), changes to edit_add in winio.c(), 
+	  changes to colortype, cleaning up some old cruft. 
+	- Upgrade to gettext 0.10.40, probably broke everything again :)
+	- Upgraded to and then downgraded from automake 1.5, as there 
+	  are severe security implications.
+- color.c:
+  do_colorinit()
+	- Moved some comments and braces around so color can work 
+	  w/slang (DLR).
+- global.c:
+  shorcut_init()
+	- Replace hard coded ALT_G and ALT_H values in the replace
+	  and goto shortcuts with their macro counterparts NANO_ALT_*_KEY.	
+- nano.c:
+  usage()
+  	- Remove extra \n in --keypad description (Jordi).
+  main()
+	- Check that alt value is an alpha char before comparing to 
+	  val - 32, fixes Alt-R calling doprev instead of replace.
+  do_char()
+	- Run edit_refresh() if ENABLE_COLOR is defined so adding
+	  multi-liners will update (e.g. /* in C).
+  do_int_spell_fix()
+	- Temporarily unset REVERSE_SEARCH if it's set (Rocco Corsi).
+  do_suspend()
+	- Call tcsetattr() to restore the old terminal settings, so
+	  tcsh can use ^C after suspend for example (fixes BUG #68).
+  do_wrap()
+	- Move "right" increment to part where new line is created, 
+	  should change (fix?) some wrapping problems with autoindent.
+  version()
+  	- Show --enable-multibuffer independently of --enable-extra being
+	  compiled in (Jordi).
+- nano.h:
+	- Changed color struct slightly, because of previous issue with
+	  applying color painting in order, the "str" portion was 
+	  uselss.  Renamed "val" in colortype to "start", added "end"
+	  for multi-line color strings.
+- rcfile.c:
+  General
+	- Took silly variables being passed everywhere like lineno and
+	  filename and made them static variables.
+	- Re-indented.
+	- Added stdarg.h to includes.
+  rcfile_error()
+	- Now automatically prpends the "error in line blah at foo"
+	  message to error messages.
+  parse_colors()
+	- Added section for computing "end" section.
+  parse_next_word()
+	- Added support for "\ ", in word parsing.
+- search.c:
+  do_search()
+	- Check position of cursor and return value of findnextstr and
+	  tell user if search string only occurs once (Rocco & Chris).
+  findnextstr()
+	- Fix off by one in check for wrap around (Rocco Corsi).
+- winio.c:
+  edit_refresh()
+	- Rename lines to nlines to fix AIX breakage (reported by
+	  Dennis Cranston, re-reported by arh14@cornell.edu).
+  edit_add()
+	- Refuse to honor regex matches of 0 characters when applying
+	  color highlighting, and say so on the statusbar.  Otherwise
+	  we go into an infinite loop, the error message should clue
+	  users into the fact that their regex is doing something bad.
+- THANKS:
+	- Oops, correct Eivind's entry. His translation was Norwegian nynorsk,
+	  not bokmål as we claimed (Jordi).
+- .cvsignore
+	- Added config.guess config.sub install-sh missing & mkinstalldirs
+- po/ca.po, po/es.po:
+	- Catalan and Spanish translation updates (Jordi).
+- po/sv.po:
+	- Swedish translation update (Christian Rose).
+- po/de.po:
+	- German translation update (Michael Piefel).
+- po/fr.po:
+	- French translation update (Jean-Philippe Guérard).
+- po/ru.po, po/uk.po:
+	- Russian and Ukrainian translation updates (Sergey A. Ribalchenko).
+- po/no.po:
+	- Moved to po/nn.po, which is the correct name for Norwegian nynorsk.
+- po/nn.po:
+	- Norwegian nynorsk translation updates (Kjetil Torgrim Homme).
+- po/nb.po:
+	- New Norwegian bokmål translation (Stig E Sandoe <stig@ii.uib.no>).
+- po/da.po:
+	- Danish translation update (Keld Simonsen).
+
+nano-1.1.5 - 01/05/2002
+- General
+	- Better integration of View mode (-v) and multibuffer.
+	  Fixes to new_file(), do_insertfile_void(), shortcut_init()
+	  (David Lawrence Ramsey).
+	- The keypad handling has changed (again).  We now use 
+	  the keypad() function by default.  New flag -K, --keypad
+	  allows the old behavior for those using the keypad arrow keys
+	  and rxvt-based terminals.
+	- Updated copyright notices to 2002 (Jordi).
+- nano.c:
+  die()
+	- Only save files that were modified (David Lawrence Ramsey).
+  do_cont()
+	- Run signal_init() after doupdate() so ^Y wont suddenly
+	  start suspending after returning from ^Z suspend in Hurd.
+  signal_init()
+	- Unconditionally disable VDSUSP if it exists, stops ^Y
+	  suspending nano on the Hurd.
+  help_init()
+	- Typo fixes in help strings (Jordi).
+	- New variable helplen needes cause currslen is not always
+	  the length we want (bug found by David Lawrence Ramsey).
+	- Typo in file switch string (found by David Lawrence Ramsey).
+  main()
+	- Handle Alt prev/next file keys (,.), as well as normal ones (<>).
+	- Handle OS-specific insert keys by jump to do_insertkey (David
+	  Lawrence Ramsey).
+- files.c:
+  read_file()
+	- Make conversion message less confusing (suggested by Jordi).
+- rcfile.c:
+  parse_next_word()
+	- Get rid of ptr == \n check to abort, screws up option
+	  parsing (bug found by David Lawrence Ramsey)
+- winio.c:
+  update_line()
+	- set realdata check to >= 1 && <= 31, lack of > 0 check screwed
+	  high ascii characters.
+  titlebar()
+	- gettextized a pair of strings.
+  bottombars()
+	- Get rid of that annoying reversed line when color is on! :)
+  edit_add()
+	- Little fixes to let color highlights not bleed onto the next line.
+  statusq()
+	- Initialize "list".
+- m4/gettext.m4:
+	- Back down to 1.1.3 version.
+- faq.html:
+	- Various link updates and other fixes (Aaron S. Hawley).
+	- Typo fixes (David Lawrence Ramsey).
+- AUTHORS
+	- Add DLR.
+- po/sv.po:
+	- Swedish translation update (Christian Rose).
+- po/ru.po, po/uk.po:
+	- Russian and Ukrainian translations updates (Sergey A. Ribalchenko).
+- po/ca.po, po/es.po:
+	- Catalan and Spanish translations updates (Jordi).
+- po/pl.po:
+	- New Polish, partial translation, by Cezary Sliwa <sliwa@cft.edu.pl>.
+	- Wojciech Kotwica <wkotwica@post.pl> completed it and is the new
+	  official maintainer.
+- po/fr.po:
+	- French translation update (Michel Robitaille).
+- po/gl.po:
+	- Galician translation update (Jacobo Tarrío).
+- po/it.po:
+	- Italian translation update (Marco Colombo).
+- po/de.po:
+	- German translation update (Michael Piefel).
+- po/fr.po:
+	- French translation update (Jean-Philippe Guérard).
+
+nano-1.1.4 - 12/11/2001
+- General
+	- Preliminary syntax highlighting support.  New functions
+	  colortoint() and parse_color() in rcfile.c, new code in 
+	  edit_add() in winio.c to actually do the highlighting.  It's
+	  not even close to pretty yet :P
+	- Many int/long alignments (David Lawrence Ramsey).
+- files.c:
+	- Fixes for tab completion and screen refresh (David Lawrence
+	  Ramsey).
+  add_open_file()
+	- Get rid of unsetting MARK_ISSET because otherwise writing
+	  marked text will automatically unset the marker with
+	  multibuffer enabled.
+- global.c:
+	- Define currshortcut and currslen when either DISABLE_MOUSE
+	  or DISABLE_HELP or DISABLE_BROWSER is not defined (Silvan
+	  Minghetti).
+- nano.c:
+  main()
+	- Add Esc-[-[IGL] keys for FreeBSD Console (PgUp,PgDn,Insert).
+        - Added better Hurd support for function keys (Alt-V,U,9,@,F).
+  signal_init()
+        - do SIG_IGN for the SIGTSTP sigaction regardless of whether
+          we have _POSIX_VDISABLE or not (more Hurd fixes)
+  help_init()
+	- Typo fixes and additions to the new help texts.
+  do_curpos()
+	- Now takes arg for constant updating to always show the cursor
+	  position (David Lawrence Ramsey).
+  do_wrap()
+	- Many fixes (David Lawrence Ramsey).
+  do_spell() 
+	- Dont prompt for replace if we don't change the word in
+	  question (Rocco Corsi).
+- po/de.po:
+	- German translation updates (Karl Eichwalder).
+- po/ru.po:
+	- Russian translation updates (Sergey A. Ribalchenko).
+- po/sv.po:
+	- Swedish translation updates (Christian Rose).
+- po/da.po:
+	- Danish translation updates (Keld Simonse).
+- po/es.po:
+	- Spanish translation updates (Jordi).
+- po/fr.po:
+	- French translation updates (Michel Robitaille).
+- m4/gettext.m4:
+	- diff against mutt 1.2.5's gettext.m4.
+
+nano-1.1.3 - 10/26/2001
+- General
+	- Finally wrote function-specific help mode.  Changes to
+	  nano.c:help_init() and winio.c:do_help().  Changed
+	  currshortcut and currslen #ifdefs to depend on both 
+	  DISABLE_HELP and DISABLE_MOUSE being defined to not 
+	  include.  Changed all the shortcuts and lengths.
+	- Fixed null_at to ACTUALLY DO SOMETHING with its arg.  Again,
+	  this was causing nasty errors if the call to nrealloc moved
+	  where the data was located.
+	- Changed header comments to say "version 2" instead of "version
+	  1" as the COPYING file is actually version 2 of the GPL (bug
+	  noticed by Jordi Mallach).
+- cut.c:
+  do_cut_text()
+	-  Check to see whether marked text is contained within edit
+	   window and if so only do an edit_refresh (variable dontupdate
+	   replaces cuttingpartialline).
+  do_uncut_text()
+	- Similar display fixes (David Lawrence Ramsey).
+- faq.html
+	- Removed nano-editor.org FTP site address [deprecated] and added
+	the GNU one.
+- files.c:
+	- Added status messages for converted DOS and Mac files.
+	  People should know that their file wasnt normally formatted.	
+  load_file()
+	- Status message when trying to load an already loaded file with multiple
+	  buffers (David Lawrence Ramsey).
+  read_file()
+	- Get rid of useless linetemp variable and name num_lines int
+	  (David Lawrence Ramsey).
+- nano.c:
+	- New function do_prev_word, similar to do_next_word.  Hard coded as
+	  Alt-space, as next word is hard coded as control-space. Fixed
+	  goofy logic setting x pos to value of last line when hitting the
+	  beginning of first line, prog should simply abort.  Added
+	  the #ifdefs around the code in main().
+- nano.h:
+	- Additional #define, SMALL_TOO to determine how long
+	  MAIN_LIST_LEN is.  We need this because of the find matching
+	  bracket code.
+  main()
+	- Moved #ifndef NANO_SMALL down past the case 0: line so
+	  control-space doesn't insert a \0 (ack!)
+- rcfile.c:
+	- Fix incorrect number of rc options (David Lawrence Ramsey).
+- po/sv.po:
+	- Updated Swedish translation (Christian Rose).
+- po/da.po:
+	- Updated Danish translation (Keld Simonsen).
+- po/es.po:
+	- Style updates to Spanish translation (Santiago Vila).
+- po/ru.po, po/uk.po:
+	- Updated Russian and Ukrainian translation (Sergey A. Ribalchenko).
+
 nano-1.1.2 - 10/03/2001
 - General
 	- Added BUGS #63 & 64.  Fixes in search_init() and nanogetstr(),

Makefile.am

@@ -1,9 +1,7 @@
 ## $Id$
 AUTOMAKE_OPTIONS = gnu no-dependencies
-M4DIR = $(srcdir)/m4
-ACLOCAL_AMFLAGS = -I $(M4DIR)
-ACINCLUDE_INPUTS = $(M4DIR)/gettext.m4 $(M4DIR)/largefile.m4 \
-	$(M4DIR)/lcmessage.m4 $(M4DIR)/progtest.m4
+
+DEFS= -DSYSCONFDIR=\"$(sysconfdir)\"
 
 bin_PROGRAMS = 	nano
 nano_SOURCES =	color.c \
@@ -27,12 +25,9 @@ MAKEINFO = makeinfo --no-split
 
 EXTRA_DIST =	ABOUT-NLS AUTHORS BUGS COPYING ChangeLog INSTALL NEWS \
 		README THANKS TODO install-sh missing mkinstalldirs \
-		nano.1 nano.1.html faq.html nanorc.sample $(ACINCLUDE_INPUTS)
+		nano.1 nano.1.html faq.html nanorc.sample nano.spec
 
-SUBDIRS = po intl
+SUBDIRS = po intl m4
 
-localedir = @LOCALE_DIR@
+localedir = $(datadir)/locale
 INCLUDES = -Iintl -DLOCALEDIR=\"$(localedir)\" -I@includedir@
-
-$(srcdir)/acinclude.m4: $(ACINCLUDE_INPUTS)
-	cat $(ACINCLUDE_INPUTS) > $@

Makefile.in

@@ -1,647 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CURSES_LIB = @CURSES_LIB@
-DATADIRNAME = @DATADIRNAME@
-GENCAT = @GENCAT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_CONFIG = @GLIB_CONFIG@
-GLIB_LIBS = @GLIB_LIBS@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GNU_LOCALE_DIR = @GNU_LOCALE_DIR@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
-INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-LOCALE_DIR = @LOCALE_DIR@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-l = @l@
-
-AUTOMAKE_OPTIONS = gnu no-dependencies
-M4DIR = $(srcdir)/m4
-ACLOCAL_AMFLAGS = -I $(M4DIR)
-ACINCLUDE_INPUTS = $(M4DIR)/gettext.m4 $(M4DIR)/largefile.m4 	$(M4DIR)/lcmessage.m4 $(M4DIR)/progtest.m4
-
-
-bin_PROGRAMS = nano
-nano_SOURCES = color.c 		cut.c 		files.c 		global.c 		move.c 		nano.c 		nano.h 		proto.h 		rcfile.c 		search.c 		utils.c 		winio.c 
-
-
-man_MANS = nano.1
-nano_LDADD = @GLIB_LIBS@ @INTLLIBS@
-
-info_TEXINFOS = nano.texi
-MAKEINFO = makeinfo --no-split
-
-EXTRA_DIST = ABOUT-NLS AUTHORS BUGS COPYING ChangeLog INSTALL NEWS 		README THANKS TODO install-sh missing mkinstalldirs 		nano.1 nano.1.html faq.html nanorc.sample $(ACINCLUDE_INPUTS)
-
-
-SUBDIRS = po intl
-
-localedir = @LOCALE_DIR@
-INCLUDES = -Iintl -DLOCALEDIR=\"$(localedir)\" -I@includedir@
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = 
-PROGRAMS =  $(bin_PROGRAMS)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I.
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-nano_OBJECTS =  color.o cut.o files.o global.o move.o nano.o rcfile.o \
-search.o utils.o winio.o
-nano_DEPENDENCIES = 
-nano_LDFLAGS = 
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = texi2dvi
-INFO_DEPS = nano.info
-DVIS = nano.dvi
-TEXINFOS = nano.texi
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
-
-NROFF = nroff
-DIST_COMMON =  README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
-INSTALL Makefile.am Makefile.in NEWS THANKS TODO acconfig.h aclocal.m4 \
-config.guess config.h.in config.sub configure configure.in install-sh \
-missing mkinstalldirs texinfo.tex
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-SOURCES = $(nano_SOURCES)
-OBJECTS = $(nano_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4):  configure.in 
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-config.h: stamp-h
-	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
-	else :; fi
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=config.h:config.h.in \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
-	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
-	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
-	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
-	-rm -f config.h
-
-maintainer-clean-hdr:
-
-mostlyclean-binPROGRAMS:
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-distclean-binPROGRAMS:
-
-maintainer-clean-binPROGRAMS:
-
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(bindir)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo "  $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
-	     $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-	  else :; fi; \
-	done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-	done
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-nano: $(nano_OBJECTS) $(nano_DEPENDENCIES)
-	@rm -f nano
-	$(LINK) $(nano_LDFLAGS) $(nano_OBJECTS) $(nano_LDADD) $(LIBS)
-
-nano.info: nano.texi
-nano.dvi: nano.texi
-
-
-DVIPS = dvips
-
-.texi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texi.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.txi.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-.dvi.ps:
-	$(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  d=$(srcdir); \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  list='$(INFO_DEPS)'; \
-	  for file in $$list; do \
-	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
-	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
-	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  test -z "$ii" \
-	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
-	done
-	@$(NORMAL_UNINSTALL)
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
-	done
-
-dist-info: $(INFO_DEPS)
-	list='$(INFO_DEPS)'; \
-	for base in $$list; do \
-	  d=$(srcdir); \
-	  for file in `cd $$d && eval echo $$base*`; do \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -f nano.aux nano.cp nano.cps nano.dvi nano.fn nano.fns nano.ky \
-	  nano.kys nano.ps nano.log nano.pg nano.toc nano.tp nano.tps \
-	  nano.vr nano.vrs nano.op nano.tr nano.cv nano.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
-	cd $(srcdir) && for i in $(INFO_DEPS); do \
-	  rm -f $$i; \
-	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
-	    rm -f $$i-[0-9]*; \
-	  fi; \
-	done
-
-install-man1:
-	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
-	done
-
-uninstall-man1:
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
-	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
-	done
-install-man: $(MANS)
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
-	@$(NORMAL_UNINSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive  \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	$(mkinstalldirs) $(distdir)/$(M4DIR)
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-info-am: $(INFO_DEPS)
-info: info-recursive
-dvi-am: $(DVIS)
-dvi: dvi-recursive
-check-am: all-am
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am: install-binPROGRAMS
-install-exec: install-exec-recursive
-
-install-data-am: install-info-am install-man
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-binPROGRAMS uninstall-info uninstall-man
-uninstall: uninstall-recursive
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) config.h
-all-redirect: all-recursive-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(infodir) \
-		$(DESTDIR)$(mandir)/man1
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS \
-		mostlyclean-compile mostlyclean-aminfo mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-aminfo \
-		clean-tags clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile \
-		distclean-aminfo distclean-tags distclean-generic \
-		clean-am
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS \
-		maintainer-clean-compile maintainer-clean-aminfo \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
-uninstall-man install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-$(srcdir)/acinclude.m4: $(ACINCLUDE_INPUTS)
-	cat $(ACINCLUDE_INPUTS) > $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

NEWS

@@ -1,3 +1,108 @@
+05/12/2002 - GNU nano 1.1.9 is released, happy Mother's Day!  This release
+		includes many new features, including a prepend mode 
+		(^O,M-P), a new "syntax" command in the .nanorc to allow
+		multiple syntax highlighting types, and a new -Y, --syntax  
+		flag to set a specific one if there's no filename regex to 
+		match it against (i.e. w/mutt).  The ^space and M-space keys
+		will now show up in the help menu, which itself has been
+		tweaked a bit, and many more configure options should now
+		cooperate (like the odd pairing of --enable-tiny and 
+		--enable-multibuffer).  The marker should now work
+		when using multiple buffers, and the huge memory leak in
+		color syntax highlighting has been fixed.  A lot of
+		new stuff for everyone's favorite text editor ;)  Have fun!
+
+03/30/2002 - GNU nano 1.1.8 is released.  New features include an 
+		"Insert Output of External Command", ^R^X, and a .spec
+		file is now included in the distribution.  There are 
+		cleanups in the usage code, fixes for regex parsing, 
+		the file browser, the NO_CONVERT auto-detect, indented 
+		justification, the internal spell checker, and a serious 
+		bug where reading a file of 0 lines would hang nano.  
+		Also, the "show position" code now shows the starting 
+		column as 1 instead of 0.  Have fun!
+
+03/05/2002 - GNU nano 1.1.7 "lets change everything and see what breaks"
+		is released.  New features include new flags 
+		-N,--noconvert to stop any file format conversion and
+		-Q, --quotestr for the new quoted text justification,
+		a new tempnam() implementation to avoid silly warnings,
+		DOS and Mac file options in the Write File dialog,
+		multiple save files (file.1) for abnormal exits, ^C
+		now shows column as well as character position, and 
+		multibuffer allows duplicate files, even unnamed ones.
+		Also, the static shortcut and toggle lengths are
+		history, nano now reads $SYSCONFDIR/nanorc if rc file
+		support is enabled, and nano is now built with (and
+		requires for rebuilding) autoconf 2.5. 
+			This release also includes fixes for some memory
+		leaks, detecting DOS and mac file format, justification,
+		suspending keys, search & replace under various 
+		conditions, variable width for shortcuts, and the usual
+		ton of translation updates.
+
+01/25/2002 - GNU nano 1.1.6 is released.  Lots of new features in this
+		release.  New Meta-keys were added as alternates for 
+		control sequences: Meta-A for the marker key (^^), and
+		Meta-G for the 'goto dir' key in the file browser (^_).
+		The color syntax highlighting now supports multiple
+		lines via start="regex" end="regex" syntax, and the
+		.nanorc regex format itself has changed. Also, the
+		gettext code was upgraded to version 0.10.40, and nano
+		will now display a message if only occurrence of a
+		given search exists. 
+			For bugfixes, there are fixes for spelling,
+		stray newlines in the usage() function, suspend issues
+		with tcsh, auto-indent and wrapping clashes, ugly code 
+		in rcfile.c, global variable compatibility with AIX.
+		There are also oodles of translation updates.
+		Have fun with it.
+
+01/05/2002 - GNU nano 1.1.5 is out.  The main new feature in this 
+		release is the changed behavior of the keypad.  Nano now 
+		does the Right Thing and used keypad() by default.  If
+		you wish to use the keypad arrow keys in certain 
+		terminals, you may use the -K or --keypad flag to
+		use the old behavior.  Users of other OSes should see 
+		better handling of their non-keypad keys in this 
+		release.  Other changes include more Hurd fixes, fixes
+		parsing the .nanorc, display fixes for the color syntax
+		highlighting, gettext stabilization and many translation
+		updates.  This is amost like a stable release, much like
+		in the 0.9.x series when every other release was the
+		mosts stable one :)  Have fun!
+		
+12/11/2001 - GNU nano 1.1.4 is released.  This release contains 
+		rudimentary color syntax support (but it's still
+		broken), compatibility fixes for the Hurd and FreeBSD,
+		spell checker and wrapping fixes, and more.  It seems
+		that the amount of interest in the code is inversely
+		proportional to the amount of time since last release,
+		so it's time to show the world all the changes since 
+		1.1.3 ;)  Have fun with it!
+ 
+10/26/2001 - GNU nano 1.1.3 is released.  As far as new features go, 
+		the help system is now available for all functions in the
+		editor.  Also, nano will also now print a message on
+		the status bar when it automatically converts a file from
+		Mac or DOS format, and trying to load a file that
+		has already been loaded in multibuffer mode will now also
+		cause an error message.  There is now a "goto previous
+		word" which you can use by hitting Meta-Space Bar.
+			As for fixes, a SEVERE bug in the 
+		null_at code which discarded the memory address of
+		reallocated memory has been fixed. This is probably
+		the biggest bug fix in well over the last year of
+		development.  There are also some display fixes for when
+		the screen shouldn't center itself on cut or uncut text.
+		Also, the comments in the header files incorectly said
+		that nano was distributed under version 1 of the GPL when
+		the accompanying license was the GPLv2.  
+			If you're using nano-1.1, it is highly
+		recommeneded you upgrade to this release.  If using 1.0,
+		wait for version 1.0.6 which should be available early
+		next week.  Enjoy!
+
 10/03/2001 - GNU nano 1.1.2 is out there.  Many new features in this
 		release, including support for auto-converting from
 		DOS and Mac formatted files, as well as toggles for

README

@@ -38,14 +38,17 @@ Web Page
      
 Mailing List and Bug Reports
 
-	SourceForge hosts all the nano-related mailing-lists.
-	+ nano-announce@lists.sourceforge.net is a very low traffic list
+	Savannah hosts all the nano-related mailing-lists.
+	+ info-nano@gnu.org is a very low traffic list
 	  used to announce new Nano versions or other important information
 	  about the project.
-	+ nano-devel@lists.sourceforge.net is the list used by the people
+	+ help-nano@gnu.org is for those seeking to get help without
+	  wanting to hear about the technical details of its
+	  development.
+	+ nano-devel@gnu.org is the list used by the people
 	  that make Nano and a general development discussion list, with
 	  moderate traffic.
-	To subscribe, send email to nano-<name>-request@lists.sourceforge.net
+	To subscribe, send email to nano-<name>-request@gnu.org
 	with a subject of "subscribe", where <name> is the list you want to
 	subscribe to.
 	For general bug reports, send a description of the problem to

README.CVS

@@ -0,0 +1,38 @@
+INSTRUCTIONS TO COMPILE AND INSTALL NANO CVS VERSIONS
+-----------------------------------------------------
+
+GNU nano is available from CVS, but building this needs a bit
+more care than the official stable and unstable tarballs.
+
+To succesfully compile GNU nano from CVS, you'll need the
+following packages:
+
+- autoconf (version >= 2.52)
+- automake (version 1.4-pl5 recommended)
+- autoheader
+- gettext (version 0.10.40)
+- texinfo
+- cvs
+- make, gcc and the normal development libraries (ncurses, etc)
+These should be available on your GNU mirror.
+
+
+To download the CVS tree, execute the following command:
+$ cvs -z3 -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/nano login
+and press enter at the password prompt.
+Then, do
+$ cvs -z3 -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/nano checkout nano
+and the nano tree will download.
+If you want to checkout the stable CVS branch, append -r nano_1_0_branch:
+$ cvs -z3 -d:pserver:anonymous@subversions.gnu.org:/cvsroot/nano checkout -r nano_1_0_branch nano
+
+One you have the sources in the "nano" directory, cd into it, and execute
+the "autogen.sh" script in the top dir. This will setup a configure script
+and Makefile.in, and you will be ready to compile with
+$ ./configure [--add-options-here] && make
+Once it's done compiling,
+$ make install
+should put the required files in their respective directories.
+
+
+Please submit any bugs in the CVS branch to nano-devel@gnu.org.

THANKS

@@ -3,19 +3,28 @@ If we missed you here, let us now!
 
 Marco Colombo <magicdice@inwind.it>		Italian Translator
 Karl Eichwalder <keichwa@gmx.net>		German Translator
+Jean-Philippe Guérard <jean-philippe.guerard@laposte.net>
+						French Translator
 Tedi Heriyanto <tedi_h@gmx.net>			Indonesian Translator
 Václav Haisman <V.Haisman@sh.cvut.cz>		Czech Translator
 Szabolcs Horvath <horvaths@janus.gimsz.sulinet.hu>
 						Hungarian Translator
-Eivind Kjørstad <ekj@vestdata.no>		Norwegian (Bokmål) Translator
+Eivind Kjørstad <ekj@vestdata.no>		Norwegian nynorsk Translator
 Florian König <floki@bigfoot.com>		German Translator
+Wojciech Kotwica <wkotwica@post.pl>		Polish Translator
 Clement Laforet <clem_laf@wanadoo.fr>		French Translator
+Gergely Nagy <algernon@debian.org>		Hungarian Translator
+Michael Piefel <piefel@informatik.hu-berlin.de> German Translator
 Sergey A. Ribalchenko <fisher@obu.ck.ua>	Russian, Ukrainian Translator
+Michel Robitaille <robitail@IRO.UMontreal.CA>	French Translator
 Christian Rose <menthos@menthos.com>		Swedish Translator
+Stig E Sandoe <stig@ii.uib.no>			Norwegian bokmål Translator
 Keld Simonsen <keld@dkuug.dk>			Danish Translator
 Guus Sliepen <guus@nl.linux.org>		Dutch Translator
+Cezary Sliwa <sliwa@cft.edu.pl>			Polish Translator
 Pierre Tane <tanep@bigfoot.com>			French Translator
 Jacobo Tarrío <jtarrio@trasno.net>		Galician Translator
+Kjetil Torgrim Homme <kjetilho@linpro.no>	Norwegian nynorsk Translator
 Miquel Vidal <miquel@sindominio.net>		Catalan Translator
 Pauli Virtanen <pauli.virtanen@saunalahti.fi>	Finnish Translator
 
@@ -23,7 +32,6 @@ Jim Knoble <jmknoble@pobox.com>			Pico compat for browser
 Thomas Dickey <dickey@herndon4.his.com>		Curses help and advice
 Ryan Krebs <fluffy@highwire.stanford.edu>	Many bug fixes and testing
 Ken Tyler <kent@werple.net.au>			Super bug tester and advice
-David Lawrence Ramsey <pooka_regent@sluggy.net>	Patches galore
 Bill Soudan <wes0472@rit.edu>			Regex code, etc
 Ben Armstrong <synrg@sanctuary.nslug.ns.ca>	Negative -r value idea, code
 Jeremy Robichaud <robicj@yahoo.com>		Beta tester

TODO

@@ -20,16 +20,16 @@ Current Version:
 
 For Next Version:
 - Undo/Redo key?
-- Single line scroll up/down?
+- Single line scroll up/down? [DONE]
 - Color syntax highlighting? (certainly seems like there's a demand for it.)
-- .nanorc ?????
+- .nanorc [DONE]
 - Backup making (filename~)?
 - Search (etc) string history [1.1]
-- Implement Pico's -j and -g flags, as they are pretty easy to do.
+- Implement Pico's -j and -g flags, as they are pretty easy to do. [DONE]
 - Make mouse support work with clicking on the shortcuts (-m).  Must
   make global variable pointing to current shortcut list to determine what
   keystroke to ungetch(). [DONE].
-- Implement -o (chroot of sorts)
+- Implement -o (chroot of sorts) [DONE]
 - Allow -r to take a negative argument, meaning right margin instead of
   left (allows resizing that way), formerly -W arg. [DONE]
 - UTF-8 support.

acconfig.h

@@ -57,7 +57,7 @@
 /* Define this to disable setting of the operating directory (chroot of sorts) */
 #undef DISABLE_OPERATINGDIR
 
-/* Define this to enable multiple file buffers; this is disabled if NANO_SMALL is defined */
+/* Define this to enable multiple file buffers */
 #undef ENABLE_MULTIBUFFER
 
 /* Define this to use the .nanorc file */
@@ -71,3 +71,6 @@
 
 /* Define this to enable undoing....something */
 #undef ENABLE_UNDO
+
+/* Shut up the assert warnings :-) */
+#undef NDEBUG

aclocal.m4

@@ -1,866 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated.  We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
-  case " <<$>>CONFIG_HEADERS " in
-  *" <<$>>am_file "*<<)>>
-    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-    ;;
-  esac
-  am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
-
-#serial 19
-
-dnl By default, many hosts won't let programs access large files;
-dnl one must use special compiler options to get large-file access to work.
-dnl For more details about this brain damage please see:
-dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
-
-dnl Written by Paul Eggert <eggert@twinsun.com>.
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_TEST_INCLUDES
-AC_DEFUN(AC_SYS_LARGEFILE_TEST_INCLUDES,
-  [[#include <sys/types.h>
-    /* Check that off_t can represent 2**63 - 1 correctly.
-       We can't simply "#define LARGE_OFF_T 9223372036854775807",
-       since some C++ compilers masquerading as C compilers
-       incorrectly reject 9223372036854775807.  */
-#   define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-    int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-			&& LARGE_OFF_T % 2147483647 == 1)
-		       ? 1 : -1];
-  ]])
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, VALUE, CACHE-VAR, COMMENT, INCLUDES, FUNCTION-BODY)
-AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
-  [AC_CACHE_CHECK([for $1 value needed for large files], $3,
-     [$3=no
-      AC_TRY_COMPILE([$5],
-	[$6], 
-	,
-	[AC_TRY_COMPILE([#define $1 $2]
-[$5]
-	   ,
-	   [$6],
-	   [$3=$2])])])
-   if test "[$]$3" != no; then
-     AC_DEFINE_UNQUOTED([$1], [$]$3, [$4])
-   fi])
-
-AC_DEFUN(NANO_AC_SYS_LARGEFILE,
-  [AC_REQUIRE([AC_PROG_CC])
-   AC_ARG_ENABLE(largefile,
-     [  --disable-largefile     omit support for large files])
-   if test "$enable_largefile" != no; then
-
-     AC_CACHE_CHECK([for special C compiler options needed for large files],
-       ac_cv_sys_largefile_CC,
-       [ac_cv_sys_largefile_CC=no
-        if test "$GCC" != yes; then
-	  # IRIX 6.2 and later do not support large files by default,
-	  # so use the C compiler's -n32 option if that helps.
-	  AC_TRY_COMPILE(AC_SYS_LARGEFILE_TEST_INCLUDES, , ,
-	    [ac_save_CC="$CC"
-	     CC="$CC -n32"
-	     AC_TRY_COMPILE(AC_SYS_LARGEFILE_TEST_INCLUDES, ,
-	       ac_cv_sys_largefile_CC=' -n32')
-	     CC="$ac_save_CC"])
-        fi])
-     if test "$ac_cv_sys_largefile_CC" != no; then
-       CC="$CC$ac_cv_sys_largefile_CC"
-     fi
-
-     AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS, 64,
-       ac_cv_sys_file_offset_bits,
-       [Number of bits in a file offset, on hosts where this is settable.],
-       AC_SYS_LARGEFILE_TEST_INCLUDES)
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES, 1,
-       ac_cv_sys_large_files,
-       [Define for large files, on AIX-style hosts.],
-       AC_SYS_LARGEFILE_TEST_INCLUDES)
-   fi
-  ])
-
-AC_DEFUN(AC_FUNC_FSEEKO,
-  [AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE, 1,
-     ac_cv_sys_largefile_source,
-     [Define to make fseeko visible on some hosts (e.g. glibc 2.2).],
-     [#include <stdio.h>], [return !fseeko;])
-   # We used to try defining _XOPEN_SOURCE=500 too, to work around a bug
-   # in glibc 2.1.3, but that breaks too many other things.
-   # If you want fseeko and ftello with glibc, upgrade to a fixed glibc.
-
-   AC_CACHE_CHECK([for fseeko], ac_cv_func_fseeko,
-     [ac_cv_func_fseeko=no
-      AC_TRY_LINK([#include <stdio.h>],
-        [return fseeko && fseeko (stdin, 0, 0);],
-	[ac_cv_func_fseeko=yes])])
-   if test $ac_cv_func_fseeko != no; then
-     AC_DEFINE(HAVE_FSEEKO, 1,
-       [Define if fseeko (and presumably ftello) exists and is declared.])
-   fi])
-
-# Configure paths for GLIB
-# Owen Taylor     97-11-3
-
-dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
-dnl gthread is specified in MODULES, pass to glib-config
-dnl
-AC_DEFUN(AM_PATH_GLIB,
-[dnl 
-dnl Get the cflags and libraries from the glib-config script
-dnl
-AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
-            glib_config_prefix="$withval", glib_config_prefix="")
-AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
-            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
-AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
-		    , enable_glibtest=yes)
-
-  if test x$glib_config_exec_prefix != x ; then
-     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
-     if test x${GLIB_CONFIG+set} != xset ; then
-        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
-     fi
-  fi
-  if test x$glib_config_prefix != x ; then
-     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
-     if test x${GLIB_CONFIG+set} != xset ; then
-        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
-     fi
-  fi
-
-  for module in . $4
-  do
-      case "$module" in
-         gmodule) 
-             glib_config_args="$glib_config_args gmodule"
-         ;;
-         gthread) 
-             glib_config_args="$glib_config_args gthread"
-         ;;
-      esac
-  done
-
-  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
-  min_glib_version=ifelse([$1], ,0.99.7,$1)
-  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
-  no_glib=""
-  if test "$GLIB_CONFIG" = "no" ; then
-    no_glib=yes
-  else
-    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
-    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
-    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_glibtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GLIB_CFLAGS"
-      LIBS="$GLIB_LIBS $LIBS"
-dnl
-dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-dnl checks the results of glib-config to some extent
-dnl
-      rm -f conf.glibtest
-      AC_TRY_RUN([
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.glibtest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_glib_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_glib_version");
-     exit(1);
-   }
-
-  if ((glib_major_version != $glib_config_major_version) ||
-      (glib_minor_version != $glib_config_minor_version) ||
-      (glib_micro_version != $glib_config_micro_version))
-    {
-      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
-             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
-             glib_major_version, glib_minor_version, glib_micro_version);
-      printf ("*** was found! If glib-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
-      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
-      printf("*** before re-running configure\n");
-    } 
-  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
-	   (glib_minor_version != GLIB_MINOR_VERSION) ||
-           (glib_micro_version != GLIB_MICRO_VERSION))
-    {
-      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
-	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     glib_major_version, glib_minor_version, glib_micro_version);
-    }
-  else
-    {
-      if ((glib_major_version > major) ||
-        ((glib_major_version == major) && (glib_minor_version > minor)) ||
-        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
-               glib_major_version, glib_minor_version, glib_micro_version);
-        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
-        printf("*** correct copy of glib-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_glib" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$GLIB_CONFIG" = "no" ; then
-       echo "*** The glib-config script installed by GLIB could not be found"
-       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
-       echo "*** full path to glib-config."
-     else
-       if test -f conf.glibtest ; then
-        :
-       else
-          echo "*** Could not run GLIB test program, checking why..."
-          CFLAGS="$CFLAGS $GLIB_CFLAGS"
-          LIBS="$LIBS $GLIB_LIBS"
-          AC_TRY_LINK([
-#include <glib.h>
-#include <stdio.h>
-],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
-          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-          echo "***"
-          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
-          echo "*** came with the system with the command"
-          echo "***"
-          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
-          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
-          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GLIB_CFLAGS=""
-     GLIB_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GLIB_CFLAGS)
-  AC_SUBST(GLIB_LIBS)
-  rm -f conf.glibtest
-])
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 108
-
-AC_PREREQ(2.13)               dnl Minimum Autoconf version required.
-
-AC_DEFUN(NANO_AM_WITH_NLS,
-  [AC_MSG_CHECKING([whether NLS is requested])
-    dnl Default is enabled NLS
-    AC_ARG_ENABLE(nls,
-      [  --disable-nls           do not use Native Language Support],
-      USE_NLS=$enableval, USE_NLS=yes)
-    AC_MSG_RESULT($USE_NLS)
-    AC_SUBST(USE_NLS)
-
-    USE_INCLUDED_LIBINTL=no
-
-    AC_ARG_WITH(locale-dir,
-      [  --with-locale-dir=DIR   specify locale directory],
-      LOCALE_DIR=$withval)
-    test -z "$LOCALE_DIR" && LOCALE_DIR='$(datadir)/locale'
-    AC_SUBST(LOCALE_DIR)
-
-    AC_ARG_WITH(gnu-locale-dir,
-      [  --with-gnu-locale-dir=DIR specify GNU locale directory],
-      GNU_LOCALE_DIR=$withval)
-    test -z "$GNU_LOCALE_DIR" && GNU_LOCALE_DIR='$(prefix)/share/locale'
-    AC_SUBST(GNU_LOCALE_DIR)
-
-    dnl If we use NLS figure out what method
-    if test "$USE_NLS" = "yes"; then
-      AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested.])
-      AC_MSG_CHECKING([whether included gettext is requested])
-      AC_ARG_WITH(included-gettext,
-        [  --with-included-gettext use the GNU gettext library included here],
-        nls_cv_force_use_gnu_gettext=$withval,
-        nls_cv_force_use_gnu_gettext=no)
-      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
-      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
-      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
-        dnl User does not insist on using GNU NLS library.  Figure out what
-        dnl to use.  If gettext or catgets are available (in this order) we
-        dnl use this.  Else we have to fall back to GNU NLS library.
-	dnl catgets is only used if permitted by option --with-catgets.
-	nls_cv_header_intl=
-	nls_cv_header_libgt=
-	CATOBJEXT=NONE
-
-	AC_CHECK_HEADER(libintl.h,
-	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
-	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
-	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
-	   if test "$gt_cv_func_gettext_libc" != "yes"; then
-	     AC_CHECK_LIB(intl, bindtextdomain,
-	       [AC_CHECK_LIB(intl, gettext)])
-	   fi
-
-	   if test "$gt_cv_func_gettext_libc" = "yes" \
-	      || test "$ac_cv_lib_intl_gettext" = "yes"; then
-	      AC_DEFINE(HAVE_GETTEXT, 1,
-	  [Define to 1 if you have gettext and don't want to use GNU gettext.])
-	      NANO_AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
-	      if test "$MSGFMT" != "no"; then
-		AC_CHECK_FUNCS(dcgettext)
-		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-		NANO_AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
-			       return _nl_msg_cat_cntr],
-		  [CATOBJEXT=.gmo
-		   DATADIRNAME=share],
-		  [CATOBJEXT=.mo
-		   DATADIRNAME=lib])
-		INSTOBJEXT=.mo
-	      fi
-	    fi
-	])
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  AC_MSG_CHECKING([whether catgets can be used])
-	  AC_ARG_WITH(catgets,
-	    [  --with-catgets          use catgets functions if available],
-	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
-	  AC_MSG_RESULT($nls_cv_use_catgets)
-
-	  if test "$nls_cv_use_catgets" = "yes"; then
-	    dnl No gettext in C library.  Try catgets next.
-	    AC_CHECK_LIB(i, main)
-	    AC_CHECK_FUNC(catgets,
-	      [AC_DEFINE(HAVE_CATGETS, 1,
-			 [Define as 1 if you have catgets and don't want to use GNU gettext.])
-	       INTLOBJS="\$(CATOBJS)"
-	       AC_PATH_PROG(GENCAT, gencat, no)dnl
-	       if test "$GENCAT" != "no"; then
-		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-		 if test "$GMSGFMT" = "no"; then
-		   NANO_AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
-		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
-		 fi
-		 NANO_AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		 USE_INCLUDED_LIBINTL=yes
-		 CATOBJEXT=.cat
-		 INSTOBJEXT=.cat
-		 DATADIRNAME=lib
-		 INTLDEPS='$(top_builddir)/intl/libintl.a'
-		 INTLLIBS=$INTLDEPS
-		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-		 nls_cv_header_intl=intl/libintl.h
-		 nls_cv_header_libgt=intl/libgettext.h
-	       fi])
-	  fi
-        fi
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  dnl Neither gettext nor catgets in included in the C library.
-	  dnl Fall back on GNU gettext library.
-	  nls_cv_use_gnu_gettext=yes
-        fi
-      fi
-
-      if test "$nls_cv_use_gnu_gettext" = "yes"; then
-        dnl Mark actions used to generate GNU NLS library.
-        INTLOBJS="\$(GETTOBJS)"
-        NANO_AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
-        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-        NANO_AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-        AC_SUBST(MSGFMT)
-	USE_INCLUDED_LIBINTL=yes
-        CATOBJEXT=.gmo
-        INSTOBJEXT=.mo
-        DATADIRNAME=share
-	INTLDEPS='$(top_builddir)/intl/libintl.a'
-	INTLLIBS=$INTLDEPS
-	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-        nls_cv_header_intl=intl/libintl.h
-        nls_cv_header_libgt=intl/libgettext.h
-      fi
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext program is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-
-      # We need to process the po/ directory.
-      POSUB=po
-    else
-      DATADIRNAME=share
-      nls_cv_header_intl=intl/libintl.h
-      nls_cv_header_libgt=intl/libgettext.h
-    fi
-    if test -z "$nls_cv_header_intl"; then
-      # Clean out junk possibly left behind by a previous configuration.
-      rm -f intl/libintl.h
-    fi
-    AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
-    AC_OUTPUT_COMMANDS(
-     [case "$CONFIG_FILES" in *po/Makefile.in*)
-        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
-      esac])
-
-
-    # If this is used in GNU gettext we have to set USE_NLS to `yes'
-    # because some of the sources are only built for this goal.
-    if test "$PACKAGE" = gettext; then
-      USE_NLS=yes
-      USE_INCLUDED_LIBINTL=yes
-    fi
-
-    dnl These rules are solely for the distribution goal.  While doing this
-    dnl we only have to keep exactly one list of the available catalogs
-    dnl in configure.in.
-    for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-    dnl Make all variables we use known to autoconf.
-    AC_SUBST(USE_INCLUDED_LIBINTL)
-    AC_SUBST(CATALOGS)
-    AC_SUBST(CATOBJEXT)
-    AC_SUBST(DATADIRNAME)
-    AC_SUBST(GMOFILES)
-    AC_SUBST(INSTOBJEXT)
-    AC_SUBST(INTLDEPS)
-    AC_SUBST(INTLLIBS)
-    AC_SUBST(INTLOBJS)
-    AC_SUBST(POFILES)
-    AC_SUBST(POSUB)
-  ])
-
-AC_DEFUN(NANO_AM_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_CC])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_ISC_POSIX])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_C_CONST])dnl
-   AC_REQUIRE([AC_C_INLINE])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-
-   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h sys/param.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-strdup __argz_count __argz_stringify __argz_next])
-
-   if test "${ac_cv_func_stpcpy+set}" != "set"; then
-     AC_CHECK_FUNCS(stpcpy)
-   fi
-   if test "${ac_cv_func_stpcpy}" = "yes"; then
-     AC_DEFINE(HAVE_STPCPY, 1, [Define to 1 if you have the stpcpy function.])
-   fi
-
-   NANO_AM_LC_MESSAGES
-   NANO_AM_WITH_NLS
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-   dnl The reference to <locale.h> in the installed <libintl.h> file
-   dnl must be resolved because we cannot expect the users of this
-   dnl to define HAVE_LOCALE_H.
-   if test $ac_cv_header_locale_h = yes; then
-     INCLUDE_LOCALE_H="#include <locale.h>"
-   else
-     INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>.  Take care yourself.  */"
-   fi
-   AC_SUBST(INCLUDE_LOCALE_H)
-
-   dnl Determine which catalog format we have (if any is needed)
-   dnl For now we know about two different formats:
-   dnl   Linux libc-5 and the normal X/Open format
-   test -d intl || mkdir intl
-   if test "$CATOBJEXT" = ".cat"; then
-     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
-     dnl Transform the SED scripts while copying because some dumb SEDs
-     dnl cannot handle comments.
-     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
-   fi
-   dnl po2tbl.sed is always needed.
-   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
-     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
-   dnl In the intl/Makefile.in we have a special dependency which makes
-   dnl only sense for gettext.  We comment this out for non-gettext
-   dnl packages.
-   if test "$PACKAGE" = "gettext"; then
-     GT_NO="#NO#"
-     GT_YES=
-   else
-     GT_NO=
-     GT_YES="#YES#"
-   fi
-   AC_SUBST(GT_NO)
-   AC_SUBST(GT_YES)
-
-   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
-   dnl Try to locate is.
-   MKINSTALLDIRS=
-   if test -n "$ac_aux_dir"; then
-     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-   fi
-   if test -z "$MKINSTALLDIRS"; then
-     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-   fi
-   AC_SUBST(MKINSTALLDIRS)
-
-   dnl *** For now the libtool support in intl/Makefile is not for real.
-   l=
-   AC_SUBST(l)
-
-   dnl Generate list of files to be processed by xgettext which will
-   dnl be included in po/Makefile.
-   test -d po || mkdir po
-   case "$srcdir" in
-   .)
-     posrcprefix="../" ;;
-   /* | [[A-Za-z]]:*)
-     posrcprefix="$srcdir/" ;;
-   *)
-     posrcprefix="../$srcdir/" ;;
-   esac
-   rm -f po/POTFILES
-   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-	< $srcdir/po/POTFILES.in > po/POTFILES
-  ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(NANO_AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 2
-
-AC_PREREQ(2.13)               dnl Minimum Autoconf version required.
-
-AC_DEFUN(NANO_AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES, 1,
-		[Define if your locale.h file contains LC_MESSAGES.])
-    fi
-  fi])
-

autogen.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+# Generate configure & friends for CVS users.
+
+aclocal -I ./m4
+autoheader
+automake --add-missing
+autoconf

color.c

@@ -2,10 +2,10 @@
 /**************************************************************************
  *   color.c                                                              *
  *                                                                        *
- *   Copyright (C) 1999 Chris Allegretta                                  *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
  *   This program is free software; you can redistribute it and/or modify *
  *   it under the terms of the GNU General Public License as published by *
- *   the Free Software Foundation; either version 1, or (at your option)  *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
  *   any later version.                                                   *
  *                                                                        *
  *   This program is distributed in the hope that it will be useful,      *
@@ -33,7 +33,7 @@
 #include "proto.h"
 #include "nano.h"
 
-#ifndef NANO_SMALL
+#ifdef ENABLE_NLS
 #include <libintl.h>
 #define _(string) gettext(string)
 #else
@@ -98,14 +98,73 @@ void colorinit_one(int colortoset, short fg, short bg, int bold)
 
 int do_colorinit(void)
 {
+    int i;
+    colortype *tmpcolor = NULL, *beforenow = NULL;
+    int defok = 0;
+
     if (has_colors()) {
 	start_color();
 	/* Add in colors, if available */
+
 #ifdef HAVE_USE_DEFAULT_COLORS
-	/* Use if at all possible for transparent terminals =-) */
-	use_default_colors();
+ 	if (use_default_colors() != ERR)
+	    defok = 1;
 #endif
-	/* Some defaults values to play with */
+
+	i = 1;
+	for (tmpcolor = colorstrings; tmpcolor != NULL; 
+		tmpcolor = tmpcolor->next) {
+
+	    for (beforenow = colorstrings; beforenow != NULL
+		 && beforenow != tmpcolor && 
+		 (beforenow->fg != tmpcolor->fg || beforenow->bg != tmpcolor->bg
+		 || beforenow->bright != tmpcolor->bright);
+		beforenow = beforenow->next)
+		;
+
+	    if (beforenow != NULL && beforenow != tmpcolor) {
+		tmpcolor->pairnum = beforenow->pairnum;
+		continue;
+	    }
+	    
+	    if (defok && tmpcolor->bg == -1)
+		init_pair(i, tmpcolor->fg, -1);
+            else if (tmpcolor->bg == -1)
+		init_pair(i, tmpcolor->fg, COLOR_BLACK);
+	    else /* They picked a fg and bg color */
+		init_pair(i, tmpcolor->fg, tmpcolor->bg);
+
+#ifdef DEBUG
+	    fprintf(stderr, "Running init_pair with fg = %d and bg = %d\n", tmpcolor->fg, tmpcolor->bg);
+#endif
+
+	    tmpcolor->pairnum = i;
+	    i++;
+	}
+    }
+
+/*
+	if (use_default_colors() != ERR) {
+	    init_pair(COLOR_BLACK, -1, -1);
+	    init_pair(COLOR_GREEN, COLOR_GREEN, -1);
+	    init_pair(COLOR_WHITE, COLOR_WHITE, -1);
+	    init_pair(COLOR_RED, COLOR_RED, -1);
+	    init_pair(COLOR_CYAN, COLOR_CYAN, -1);
+	    init_pair(COLOR_MAGENTA, COLOR_MAGENTA, -1);
+	    init_pair(COLOR_BLUE, COLOR_BLUE, -1);
+	    init_pair(COLOR_YELLOW, COLOR_YELLOW, -1);
+
+	} else {
+	    init_pair(COLOR_BLACK, COLOR_BLACK, COLOR_BLACK);
+	    init_pair(COLOR_GREEN, COLOR_GREEN, COLOR_BLACK);
+	    init_pair(COLOR_WHITE, COLOR_WHITE, COLOR_BLACK);
+	    init_pair(COLOR_RED, COLOR_RED, COLOR_BLACK);
+	    init_pair(COLOR_CYAN, COLOR_CYAN, COLOR_BLACK);
+	    init_pair(COLOR_MAGENTA, COLOR_MAGENTA, COLOR_BLACK);
+	    init_pair(COLOR_BLUE, COLOR_BLUE, COLOR_BLACK);
+	    init_pair(COLOR_YELLOW, COLOR_YELLOW, COLOR_BLACK);
+	}
+*/
 
 	/*  Okay I'll be nice and comment these out for the commit =)
 	colorinit_one(COLOR_TITLEBAR, COLOR_GREEN, COLOR_BLUE, 1);
@@ -113,10 +172,40 @@ int do_colorinit(void)
 	colorinit_one(COLOR_STATUSBAR, COLOR_BLACK, COLOR_CYAN, 0);
 	colorinit_one(COLOR_TEXT, COLOR_WHITE, COLOR_BLACK, 0);
 	colorinit_one(COLOR_MARKER, COLOR_BLACK, COLOR_CYAN, 0);
-	*/
+    }
+*/
+    return 0;
+}
+
+/* Update the color information based on the current filename */
+void update_color(void)
+{
+    syntaxtype *tmpsyntax;
+
+    colorstrings = NULL;
+    for (tmpsyntax = syntaxes; tmpsyntax != NULL; tmpsyntax = tmpsyntax->next) {
+	exttype *e;
+	for (e = tmpsyntax->extensions; e != NULL; e = e->next) {
+	    regcomp(&syntaxfile_regexp, e->val, 0);
+
+	    /* Set colorstrings if we matched the extension regex */
+            if (!regexec(&syntaxfile_regexp, filename, 1, synfilematches, 0)) 
+		colorstrings = tmpsyntax->color; 
+
+	    regfree(&syntaxfile_regexp);
+	}
     }
 
-    return 0;
+    /* if we haven't found a match, use the override string */
+    if (colorstrings == NULL && syntaxstr != NULL) {
+	for (tmpsyntax = syntaxes; tmpsyntax != NULL; 
+	     tmpsyntax = tmpsyntax->next) {
+	    if (!strcasecmp(tmpsyntax->desc, syntaxstr))
+		colorstrings = tmpsyntax->color;
+	}
+    }
+    do_colorinit();
+    edit_refresh();
 }
 
 #endif /* ENABLE_COLOR */

config.h.in

@@ -1,240 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if using alloca.c.  */
-#undef C_ALLOCA
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-#undef CRAY_STACKSEG_END
-
-/* Define if you have alloca, as a function or macro.  */
-#undef HAVE_ALLOCA
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#undef HAVE_ALLOCA_H
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-#undef HAVE_DOPRNT
-
-/* Define if you have a working `mmap' system call.  */
-#undef HAVE_MMAP
-
-/* Define if you have the vprintf function.  */
-#undef HAVE_VPRINTF
-
-/* Define as __inline if that's what the C compiler calls it.  */
-#undef inline
-
-/* Define to `long' if <sys/types.h> doesn't define.  */
-#undef off_t
-
-/* Define if you need to in order for stat and other things to work.  */
-#undef _POSIX_SOURCE
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown
- */
-#undef STACK_DIRECTION
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define this if you have the wresize function in your ncurses-type library */
-#undef HAVE_WRESIZE
-
-/* Define this if you have the resizeterm function in your ncurses-type library */
-#undef HAVE_RESIZETERM
-
-/* Define this if your curses lib has the _use_keypad flag */
-#undef HAVE_USEKEYPAD
-
-/* Define this to make the nano executable as small as possible */
-#undef NANO_SMALL
-
-/* Define to use the slang wrappers for curses instead of native curses */
-#undef USE_SLANG
-
-/* Define this to enable the extra stuff */
-#undef NANO_EXTRA
-
-/* Define to disable the tab completion code Chris worked so hard on! */
-#undef DISABLE_TABCOMP
-
-/* Define this to disable the justify routine */
-#undef DISABLE_JUSTIFY
-
-/* Define this to disable the use(full|less) spelling functions */
-#undef DISABLE_SPELLER
-
-/* Define this to disable the ^G help menu */
-#undef DISABLE_HELP
-
-/* Define this to disable the built-in (crappy) file browser */
-#undef DISABLE_BROWSER
-
-/* Define this to disable any and all text wrapping */
-#undef DISABLE_WRAPPING
-
-/* Define this to disable the mouse functions */
-#undef DISABLE_MOUSE
-
-/* Define this to disable setting of the operating directory (chroot of sorts) */
-#undef DISABLE_OPERATINGDIR
-
-/* Define this to enable multiple file buffers; this is disabled if NANO_SMALL is defined */
-#undef ENABLE_MULTIBUFFER
-
-/* Define this to use the .nanorc file */
-#undef ENABLE_NANORC
-
-/* Define this if your curses library has the use_default_colors command */
-#undef HAVE_USE_DEFAULT_COLORS
-
-/* Define this to have syntax hilighting, requires ENABLE_NANORC too! */
-#undef ENABLE_COLOR
-
-/* Define this to enable undoing....something */
-#undef ENABLE_UNDO
-
-/* Define if you have the __argz_count function.  */
-#undef HAVE___ARGZ_COUNT
-
-/* Define if you have the __argz_next function.  */
-#undef HAVE___ARGZ_NEXT
-
-/* Define if you have the __argz_stringify function.  */
-#undef HAVE___ARGZ_STRINGIFY
-
-/* Define if you have the dcgettext function.  */
-#undef HAVE_DCGETTEXT
-
-/* Define if you have the getcwd function.  */
-#undef HAVE_GETCWD
-
-/* Define if you have the getopt_long function.  */
-#undef HAVE_GETOPT_LONG
-
-/* Define if you have the getpagesize function.  */
-#undef HAVE_GETPAGESIZE
-
-/* Define if you have the munmap function.  */
-#undef HAVE_MUNMAP
-
-/* Define if you have the putenv function.  */
-#undef HAVE_PUTENV
-
-/* Define if you have the setenv function.  */
-#undef HAVE_SETENV
-
-/* Define if you have the setlocale function.  */
-#undef HAVE_SETLOCALE
-
-/* Define if you have the snprintf function.  */
-#undef HAVE_SNPRINTF
-
-/* Define if you have the stpcpy function.  */
-#undef HAVE_STPCPY
-
-/* Define if you have the strcasecmp function.  */
-#undef HAVE_STRCASECMP
-
-/* Define if you have the strchr function.  */
-#undef HAVE_STRCHR
-
-/* Define if you have the strdup function.  */
-#undef HAVE_STRDUP
-
-/* Define if you have the vsnprintf function.  */
-#undef HAVE_VSNPRINTF
-
-/* Define if you have the <argz.h> header file.  */
-#undef HAVE_ARGZ_H
-
-/* Define if you have the <curses.h> header file.  */
-#undef HAVE_CURSES_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <getopt.h> header file.  */
-#undef HAVE_GETOPT_H
-
-/* Define if you have the <limits.h> header file.  */
-#undef HAVE_LIMITS_H
-
-/* Define if you have the <locale.h> header file.  */
-#undef HAVE_LOCALE_H
-
-/* Define if you have the <malloc.h> header file.  */
-#undef HAVE_MALLOC_H
-
-/* Define if you have the <ncurses.h> header file.  */
-#undef HAVE_NCURSES_H
-
-/* Define if you have the <nl_types.h> header file.  */
-#undef HAVE_NL_TYPES_H
-
-/* Define if you have the <regex.h> header file.  */
-#undef HAVE_REGEX_H
-
-/* Define if you have the <string.h> header file.  */
-#undef HAVE_STRING_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <termio.h> header file.  */
-#undef HAVE_TERMIO_H
-
-/* Define if you have the <termios.h> header file.  */
-#undef HAVE_TERMIOS_H
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the i library (-li).  */
-#undef HAVE_LIBI
-
-/* Define if you have the intl library (-lintl).  */
-#undef HAVE_LIBINTL
-
-/* Name of package */
-#undef PACKAGE
-
-/* Version number of package */
-#undef VERSION
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to 1 if you have the stpcpy function. */
-#undef HAVE_STPCPY
-
-/* Define if your locale.h file contains LC_MESSAGES. */
-#undef HAVE_LC_MESSAGES
-
-/* Define to 1 if NLS is requested. */
-#undef ENABLE_NLS
-
-/* Define to 1 if you have gettext and don't want to use GNU gettext. */
-#undef HAVE_GETTEXT
-
-/* Define as 1 if you have catgets and don't want to use GNU gettext. */
-#undef HAVE_CATGETS
-

configure.ac

@@ -1,19 +1,25 @@
 # $Id$
 dnl Process this file with autoconf to produce a configure script.
-AC_INIT(nano.c)
-AM_INIT_AUTOMAKE(nano, 1.1.2)
+AC_INIT
+AC_CONFIG_SRCDIR([nano.c])
+AC_PREREQ(2.52)
+AM_INIT_AUTOMAKE(nano, 1.1.9)
 AM_CONFIG_HEADER(config.h:config.h.in)
-ALL_LINGUAS="es de fr it id fi hu ca cs gl uk ru sv no nl da"
+AM_ACLOCAL_INCLUDE(m4)
+ALL_LINGUAS="es de fr it id fi hu ca cs gl uk ru sv nn nl da pl nb"
 
 dnl Checks for programs.
 AC_PROG_CC
 AC_ISC_POSIX
-NANO_AC_SYS_LARGEFILE
+AC_SYS_LARGEFILE
 
 dnl Checks for header files.
 AC_HEADER_STDC
 AC_CHECK_HEADERS(fcntl.h unistd.h malloc.h termios.h termio.h limits.h getopt.h regex.h)
 
+dnl Turn off assert statements.
+AC_DEFINE(NDEBUG)
+
 dnl options
 AC_ARG_ENABLE(tiny,
 [  --enable-tiny           Disable features for the sake of size
@@ -44,8 +50,8 @@ AC_ARG_ENABLE(undo,
  fi])
 
 AC_ARG_ENABLE(multibuffer,
-[  --enable-multibuffer    Enable multiple file buffers; this is disabled if --enable-tiny is used],
-[if test x$enableval = xyes && test x$tiny_support != xyes; then
+[  --enable-multibuffer    Enable multiple file buffers],
+[if test x$enableval = xyes; then
     AC_DEFINE(ENABLE_MULTIBUFFER) multibuffer_support=yes
  fi])
 
@@ -306,4 +312,5 @@ fi
 dnl i18n stuff - pretty incomplete for now
 NANO_AM_GNU_GETTEXT
 
-AC_OUTPUT([Makefile intl/Makefile po/Makefile.in])
+AC_CONFIG_FILES([Makefile intl/Makefile m4/Makefile po/Makefile.in nano.spec])
+AC_OUTPUT

cut.c

@@ -2,10 +2,10 @@
 /**************************************************************************
  *   cut.c                                                                *
  *                                                                        *
- *   Copyright (C) 1999 Chris Allegretta                                  *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
  *   This program is free software; you can redistribute it and/or modify *
  *   it under the terms of the GNU General Public License as published by *
- *   the Free Software Foundation; either version 1, or (at your option)  *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
  *   any later version.                                                   *
  *                                                                        *
  *   This program is distributed in the hope that it will be useful,      *
@@ -27,7 +27,7 @@
 #include "proto.h"
 #include "nano.h"
 
-#ifndef NANO_SMALL
+#ifdef ENABLE_NLS
 #include <libintl.h>
 #define _(string) gettext(string)
 #else
@@ -141,7 +141,7 @@ void cut_marked_segment(filestruct * top, int top_x, filestruct * bot,
     /* Now, paste bot[bot_x] into top[top_x] */
     if (destructive) {
 
-	tmpstr = charalloc(strlen(top->data) + strlen(&bot->data[bot_x]));
+	tmpstr = charalloc(top_x + strlen(&bot->data[bot_x]) + 1);
 	strncpy(tmpstr, top->data, top_x);
 	strcpy(&tmpstr[top_x], &bot->data[bot_x]);
 	free(top->data);
@@ -157,7 +157,7 @@ void cut_marked_segment(filestruct * top, int top_x, filestruct * bot,
  	screwed somewhere.  Not doing this causes update_line to annihilate
 	the last line copied into the cutbuffer when the mark is set ?!?!? */
     botcopy = copy_node(bot);
-    null_at(botcopy->data, bot_x);
+    null_at(&botcopy->data, bot_x);
     next = botcopy->next;
     add_to_cutbuffer(botcopy);
 
@@ -187,6 +187,7 @@ void cut_marked_segment(filestruct * top, int top_x, filestruct * bot,
 	if (top->lineno < edittop->lineno)
 	    edit_update(top, CENTER);
     }
+
 }
 #endif
 
@@ -194,7 +195,7 @@ int do_cut_text(void)
 {
     filestruct *tmp, *fileptr = current;
 #ifndef NANO_SMALL
-    int cuttingpartialline = 0;
+    int dontupdate = 0;
     int cuttingtoend = 0;
 #endif
 
@@ -231,7 +232,7 @@ int do_cut_text(void)
 
 		junk = NULL;
 		junk = make_new_node(current);
-	        junk->data = nmalloc(1 * sizeof (char));
+	        junk->data = charalloc(1);
 		junk->data[0] = 0;
 
 		add_to_cutbuffer(junk);
@@ -252,25 +253,40 @@ int do_cut_text(void)
 	    cuttingtoend = 1;
 	}
     }
+
     if (ISSET(MARK_ISSET)) {
 	if (current->lineno <= mark_beginbuf->lineno) {
-	    if (current->lineno == mark_beginbuf->lineno)
-		cuttingpartialline = 1;
+	    /* Don't do_update and move the screen position if the marked
+		area lies entirely within the screen buffer */
+	    if (current->lineno == mark_beginbuf->lineno
+		|| (current->lineno >= edittop->lineno
+		&& mark_beginbuf->lineno <= editbot->lineno))
+		dontupdate = 1;
+
 	    cut_marked_segment(current, current_x, mark_beginbuf,
 			       mark_beginx, 1);
 	}
-	else
+	else {
+	    /* Same as above, easier logic since we know it's a multi-line
+		cut and mark_beginbuf is before current */
+	    if (mark_beginbuf->lineno >= edittop->lineno
+		&& current->lineno <= editbot->lineno)
+		dontupdate = 1;
+
 	    cut_marked_segment(mark_beginbuf, mark_beginx, current,
 			       current_x, 1);
+	}
+
 
 	placewewant = xplustabs();
 	UNSET(MARK_ISSET);
 
 	marked_cut = 1;
 	set_modified();
-	if (cuttingpartialline || cuttingtoend)
+	if (dontupdate || cuttingtoend) {
+	    fix_editbot();
 	    edit_refresh();
-	else
+	} else
 	    edit_update(current, CENTER);
 
 	return 1;
@@ -366,6 +382,10 @@ int do_uncut_text(void)
 	    totsize += strlen(cutbuffer->data);
 	    if (strlen(cutbuffer->data) == 0)
 		totlines++;
+	    /* If we've uncut a line, make sure there's a magicline after
+	       it */
+	    if (current->next == NULL)
+		new_magicline();
 
 	    placewewant = xplustabs();
 	    update_cursor();
@@ -417,8 +437,12 @@ int do_uncut_text(void)
 	    i = editbot->lineno;
 
 	    current = newend;
-	    if (i <= newend->lineno)
+	    if (i < newend->lineno) {
 		edit_update(current, CENTER);
+	    }
+	    else {
+		edit_refresh();
+	    }
 	}
 
 	/* If marked cut == 2, that means that we're doing a cut to end
@@ -431,7 +455,7 @@ int do_uncut_text(void)
 	    tmp->data = charalloc(strlen(&current->data[current_x]) + 1);
 	    strcpy(tmp->data, &current->data[current_x]);
 	    splice_node(current, tmp, current->next);
-	    null_at(current->data, current_x);
+	    null_at(&current->data, current_x);
 	    current = current->next;
 	    current_x = 0;
 	    placewewant = 0;
@@ -476,8 +500,12 @@ int do_uncut_text(void)
 
     i = editbot->lineno;
     renumber(newbuf);
-    if (i < newend->lineno)
+    if (i < newend->lineno) {
 	edit_update(fileptr, CENTER);
+    }
+    else {
+	edit_refresh();
+    }
 
     dump_buffer_reverse(fileptr);
 

faq.html

@@ -45,7 +45,7 @@ packages.</a></font>
 RPM or DEB package?</a></font>
 <br><font color="#330000"><a href="#3.2">3.2. Compiling from source: WHAT
 THE HECK DO I DO NOW?</a></font>
-<br><font color="#330000"><a href="#3.2">3.3. Why does everything go into
+<br><font color="#330000"><a href="#3.3">3.3. Why does everything go into
 /usr/local?</a></font>
 <br><font color="#330000"><a href="#3.4">3.4. I get errors about 'bindtextdomain',
 'gettext' and/or 'gettextdomain'.&nbsp; What can I do about it?</a></font>
@@ -94,7 +94,7 @@ nano instead of Pico?</a></font>
 <br><font color="#330000"><a href="#6.2">6.2. Why should I use Pico instead
 of nano?</a></font>
 <br><font color="#330000"><a href="#6.3">6.3. What is so bad about the
-PINE license?</a></font>
+Pine license?</a></font>
 <br><font color="#330000"><a href="#6.4">6.4. Okay, well what mail program
 should I use then?</a></font>
 <br><font color="#330000"><a href="#6.5">6.5. Why doesn't UW simply change
@@ -142,7 +142,7 @@ it is useful enough it will be included in future versions.</font></blockquote>
 <a NAME="1.3"></a><font color="#330000">1.3. What is GNU nano?</font></h2>
 
 <blockquote><font color="#330000">GNU Nano is designed to be a free
-replacement for the Pico text editor, part of the PINE email suite from <a
+replacement for the Pico text editor, part of the Pine email suite from <a
 href="http://www.washington.edu/pine">The University of
 Washington</a>.&nbsp; It aims to "emulate Pico as closely as possible and
 perhaps include extra functionality.</font></blockquote>
@@ -184,7 +184,7 @@ had no help menu, spell checker, and so forth.&nbsp; But over time it improved,
 and with the help of a few great coders it matured to the (hopefully) stable
 state it is today.
 <p><font color="#330000">In February 2001, nano has been declared an
-official GNU program by Richard Stallman.  Nano also reached it's first
+official GNU program by Richard Stallman.  Nano also reached its first
 production release on March 22, 2001.</font></blockquote>
 
 <h2>
@@ -203,7 +203,7 @@ nano was developed).</font></blockquote>
 of nano?</font></h2>
 
 <blockquote><font color="#330000">The current version of nano *should*
-be 1.1.2.&nbsp; Of course you should always check the nano hompage to
+be 1.1.9.&nbsp; Of course you should always check the nano homepage to
 see what the latest and greatest version is.</font></blockquote>
 
 <h2>
@@ -229,9 +229,9 @@ at the following fine web and ftp sites:</font>
 
 <li>
 <font color="#330000"><a href="http://www.ewtoo.org/~astyanax/nano/dist">http://www.ewtoo.org/~astyanax/nano/dist</a></font></li>
-
 <li>
-<font color="#330000"><a href="ftp://ftp.nano-editor.org/pub/nano">ftp://ftp.nano-editor.org/pub/nano</a></font></li>
+<font color="#330000"><a href="ftp://ftp.gnu.org/pub/gnu/nano">ftp://ftp.gnu.org/pub/gnu/nano</a></font></li>
+
 </ul>
 </blockquote>
 
@@ -247,17 +247,15 @@ packages.</font></h2>
 <li>
 <font color="#330000"><a href="http://www.ewtoo.org/~astyanax/nano/dist/RPMS">http://www.ewtoo.org/~astyanax/nano/dist/RPMS</a></font></li>
 
-<li>
-<font color="#330000"><a href="ftp://ftp.nano-editor.org/pub/nano/RPMS">ftp://ftp.nano-editor.org/pub/nano/RPMS</a></font></li>
 </ul>
 <font color="#330000">Additionally, check out the Redhat contribs section
 at:</font>
 <ul>
 <li>
-<font color="#330000"><a href="http://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386">http://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
+<font color="#330000"><a href="http://distro.ibiblio.org/pub/Linux/distributions/redhat/contrib/libc6/i386">http://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
 
 <li>
-<font color="#330000"><a href="ftp://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386">ftp://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
+<font color="#330000"><a href="ftp://distro.ibiblio.org/pub/Linux/distributions/redhat/contrib/libc6/i386">ftp://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
 </ul>
 </blockquote>
 
@@ -291,7 +289,7 @@ tracking unstable, you probably have the newest version already.</font></blockqu
 of nano, you can use CVS to download the current source code.&nbsp; <b>Note:</b>
 believe it or not, by downloading code that has not yet stabilized into
 an official release, there could quite possibly be bugs, in fact the code
-may not even compile!&nbsp; Anyway, see <a href="https://sourceforge.net/cvs/?group_id=1304">the
+may not even compile!&nbsp; Anyway, see <a href="http://savannah.gnu.org/cvs/?group_id=1025">the
 nano CVS page</a> for info on anonymous CVS access to the nano source.</font></blockquote>
 
 <hr WIDTH="100%">
@@ -396,7 +394,7 @@ try:
 3.7. Tell me more about this multibuffer stuff!</font></h2>
 
 <blockquote><font color="#330000"> To use multiple file buffers, you must
-be using nano 1.1.2 or newer, and you must have configured nano with
+be using nano 1.1.9 or newer, and you must have configured nano with
 <b>--enable-multibuffer</b> or <b>--enable-extra</b> (use nano -V to check).
 Then when you want to enable inserting a file into its own buffer instead of
 into the current file, just hit <b>Meta-F</b>, then insert the file as normal
@@ -416,7 +414,7 @@ buffer is open.
 
 <blockquote><font color="#330000"> It's not hard at all!  But, your version
 of nano must have beem compiled with <b>--enable-nanorc</b>, and again must
-be version 1.1.2 or newer (use nano -V to check your version and compiled
+be version 1.1.9 or newer (use nano -V to check your version and compiled
 features).  Then simply copy the <b>nanorc.sample</b>
 that came with the nano source or your nano package (most likely in
 /usr/doc/nano) to .nanorc in your home directory. If you didn't get one,
@@ -443,7 +441,7 @@ keystroke here>!</font></h2>
 <blockquote><font color="#330000">If you aren't trying some bizarre keystroke
 combination with some bizarre $TERM entry, chances are you have found a
 bug.&nbsp;&nbsp; You are welcome to submit it to the
-<a href="mailto:nano-devel@lists.sourceforge.net">nano-devel</a> list or
+<a href="mailto:nano-devel@gnu.org">nano-devel</a> list or
 to <a href="mailto:nano@nano-editor.org">nano@nano-editor.org</a>.</font></blockquote>
 
 <h2>
@@ -587,7 +585,7 @@ mailer integration with Pine), nano is the way to go.
 </blockquote>
 
 <h2>
-<a NAME="6.3"></a><font color="#330000">6.3. What is so bad about the PINE
+<a NAME="6.3"></a><font color="#330000">6.3. What is so bad about the Pine
 license?</font></h2>
 
 <blockquote><font color="#330000">The U of W license for Pine and
@@ -596,7 +594,7 @@ Software Foundation and the  the <a
 href="http://www.debian.org/social_contract#guidelines">Debian
 Free Software Guidelines</a>.&nbsp; The main problem regards the
 limitations on distributing derived works: according to UW, you can
-distribute their software, and you can modfify it, but you can not do
+distribute their software, and you can modify it, but you can not do
 both, i.e. distribute modified binaries.</blockquote>
 
 <h2>
@@ -604,7 +602,7 @@ both, i.e. distribute modified binaries.</blockquote>
 should I use then?</font></h2>
 
 <blockquote><font color="#330000"> If you are looking to use a Free
-Software program similar to PINE and emacs is not your thing, you should
+Software program similar to Pine and emacs is not your thing, you should
 definitely take a look at <a href="http://www.mutt.org">mutt</a>.&nbsp; It
 is a full-screen, console based mail program that actually has a lot more
 flexibility than Pine, but has a keymap included in the distribution that
@@ -638,21 +636,33 @@ any changes in the past few years in a positive direction.</font></blockquote>
 <h2>
 <a NAME="7.1"></a><font color="#330000">7.1. Nano related mailing lists.</font></h2>
 
-<blockquote><font color="#330000">There are two mailing lists for nano
-hosted at <a href="http://www.sourceforge.net">SourceForge</a>, nano-announce
+<blockquote><font color="#330000">There are three mailing lists for nano
+hosted at <a href="http://savannah.gnu.org">Savannah</a>, info-nano, help-nano 
 and nano-devel.&nbsp; Nano-announce is a very low traffic list where new
 versions of nano are announced (surprise!)&nbsp; Nano-devel is a normally
 low, sometimes high traffic list for discussing the present and future
-development of nano.&nbsp; Here are links to where you can sign up for
+development of nano.&nbsp; Help-nano is for getting help with the editor
+without needing to hear all of the development issues surrunding it.
+&nbsp; Here are links to where you can sign up for
 a given list:</font><font color="#330000"></font>
-<p><font color="#330000">nano-announce - <a href="http://lists.sourceforge.net/mailman/listinfo/nano-announce">http://lists.sourceforge.net/mailman/listinfo/nano-announce</a></font>
-<br><font color="#330000">nano-devel - <a href="http://lists.sourceforge.net/mailman/listinfo/nano-devel">http://lists.sourceforge.net/mailman/listinfo/nano-devel</a></font></blockquote>
+<p><font color="#330000">info-nano - <a href="
+http://mail.gnu.org/mailman/listinfo/info-nano">
+http://mail.gnu.org/mailman/listinfo/info-nano</a></font>
+<br>
+<font color="#330000">help-nano - 
+<a href="http://mail.gnu.org/mailman/listinfo/help-nano">
+http://mail.gnu.org/mailman/listinfo/help-nano</a></font>
+<br>
+<font color="#330000">nano-devel - 
+<a href="http://mail.gnu.org/mailman/listinfo/nano-devel">
+http://mail.gnu.org/mailman/listinfo/nano-devel</a></font>
+</blockquote>
 
 <h2>
 <a NAME="7.2"></a><font color="#330000">7.2. I want to send the development
 team a big load of cash (or just a thank you).</font></h2>
 
-<blockquote><font color="#330000">That's fine.&nbsp; Send it <a href="mailto:nano-devel@lists.sourceforge.net">our
+<blockquote><font color="#330000">That's fine.&nbsp; Send it <a href="mailto:nano-devel@gnu.org">our
 way</a>!&nbsp; Better yet, fix a <a href="http://www.nano-editor.org/dist/BUGS">bug</a>
 in the program or implement a <a href="http://www.nano-editor.org/dist/TODO">cool
 feature</a> and send us that instead (though cash is fine too).</font></blockquote>
@@ -669,7 +679,7 @@ team?</font></h2>
 <blockquote><font color="#330000">The easiest way is to consistently send
 in good patches that add some needed functionality, fix a bug or two and/or
 make the program more optimized/efficient.&nbsp; Then ask nicely and you
-will probably be added to the SourceForge development list and be given
+will probably be added to the Savannah development list and be given
 CVS write after awhile.&nbsp; There is a lot of responsibility that goes
 along with being a team member, so don't think it's just something to add
 to your resume.</font></blockquote>
@@ -684,6 +694,7 @@ and you should know the answer.</font></blockquote>
 <a NAME="8"></a><font color="#330000">8. ChangeLog</font>
 </h2>
 
+<blockquote>2001/12/26 - Misc. fixes (Aaron S. Hawley, DLR).</blockquote>
 <blockquote>2001/10/02 - Update for Free Translation Project.</blockquote>
 <blockquote>2001/10/02 - Assorted fixes, Debian additions.</blockquote>
 <blockquote>2001/06/30 - Silly typo fix.</blockquote>

install-sh

@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0

intl/Makefile.in

@@ -1,19 +1,20 @@
 # Makefile for directory with message catalog handling in GNU NLS Utilities.
-# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+# Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
 # any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Library General Public License for more details.
 #
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
 
 PACKAGE = @PACKAGE@
 VERSION = @VERSION@
@@ -28,75 +29,106 @@ VPATH = @srcdir@
 prefix = @prefix@
 exec_prefix = @exec_prefix@
 transform = @program_transform_name@
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
-datadir = $(prefix)/@DATADIRNAME@
+libdir = @libdir@
+includedir = @includedir@
+datadir = @datadir@
 localedir = $(datadir)/locale
-gnulocaledir = $(prefix)/share/locale
-gettextsrcdir = @datadir@/gettext/intl
-aliaspath = $(localedir):.
+gettextsrcdir = $(datadir)/gettext/intl
+aliaspath = $(localedir)
 subdir = intl
 
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 MKINSTALLDIRS = @MKINSTALLDIRS@
+mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
 
-l = @l@
+l = @INTL_LIBTOOL_SUFFIX_PREFIX@
 
 AR = ar
 CC = @CC@
 LIBTOOL = @LIBTOOL@
 RANLIB = @RANLIB@
+YACC = @INTLBISON@ -y -d
+YFLAGS = --name-prefix=__gettext
 
-DEFS = -DLOCALEDIR=\"$(localedir)\" -DGNULOCALEDIR=\"$(gnulocaledir)\" \
--DLOCALE_ALIAS_PATH=\"$(aliaspath)\" @DEFS@
+DEFS = -DLOCALEDIR=\"$(localedir)\" -DLOCALE_ALIAS_PATH=\"$(aliaspath)\" \
+-DLIBDIR=\"$(libdir)\" @DEFS@
 CPPFLAGS = @CPPFLAGS@
 CFLAGS = @CFLAGS@
 LDFLAGS = @LDFLAGS@
 
 COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
 
-HEADERS = $(COMHDRS) libgettext.h loadinfo.h
+HEADERS = $(COMHDRS) libgnuintl.h libgettext.h loadinfo.h
 COMHDRS = gettext.h gettextP.h hash-string.h
-SOURCES = $(COMSRCS) intl-compat.c cat-compat.c
+SOURCES = $(COMSRCS) intl-compat.c
 COMSRCS = bindtextdom.c dcgettext.c dgettext.c gettext.c \
 finddomain.c loadmsgcat.c localealias.c textdomain.c l10nflist.c \
-explodename.c
+explodename.c dcigettext.c dcngettext.c dngettext.c ngettext.c plural.y \
+localcharset.c
 OBJECTS = @INTLOBJS@ bindtextdom.$lo dcgettext.$lo dgettext.$lo gettext.$lo \
 finddomain.$lo loadmsgcat.$lo localealias.$lo textdomain.$lo l10nflist.$lo \
-explodename.$lo
-CATOBJS = cat-compat.$lo ../po/cat-id-tbl.$lo
+explodename.$lo dcigettext.$lo dcngettext.$lo dngettext.$lo ngettext.$lo \
+plural.$lo localcharset.$lo
 GETTOBJS = intl-compat.$lo
-DISTFILES.common = ChangeLog Makefile.in linux-msg.sed po2tbl.sed.in \
-xopen-msg.sed $(HEADERS) $(SOURCES)
+DISTFILES.common = Makefile.in \
+config.charset locale.alias ref-add.sin ref-del.sin $(HEADERS) $(SOURCES)
+DISTFILES.generated = plural.c
 DISTFILES.normal = VERSION
-DISTFILES.gettext = libintl.glibc intlh.inst.in
+DISTFILES.gettext = COPYING.LIB-2 COPYING.LIB-2.1 libintl.glibc
+DISTFILES.obsolete = xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c
+
+# Libtool's library version information for libintl.
+# Before making a gettext release, the gettext maintainer must change this
+# according to the libtool documentation, section "Library interface versions".
+# Maintainers of other packages that include the intl directory must *not*
+# change these values.
+LTV_CURRENT=1
+LTV_REVISION=1
+LTV_AGE=0
 
 .SUFFIXES:
-.SUFFIXES: .c .o .lo
+.SUFFIXES: .c .y .o .lo .sin .sed
 .c.o:
 	$(COMPILE) $<
 .c.lo:
 	$(LIBTOOL) --mode=compile $(COMPILE) $<
 
-INCLUDES = -I.. -I. -I$(top_srcdir)/intl -I$(top_srcdir)/lib
+.y.c:
+	$(YACC) $(YFLAGS) --output $@ $<
+	rm -f $*.h
+
+.sin.sed:
+	sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $< > t-$@
+	mv t-$@ $@
+
+INCLUDES = -I.. -I. -I$(top_srcdir)/intl
 
 all: all-@USE_INCLUDED_LIBINTL@
+all-yes: libintl.$la libintl.h charset.alias ref-add.sed ref-del.sed
+all-no: all-no-@BUILD_INCLUDED_LIBINTL@
+all-no-yes: libgnuintl.$la
+all-no-no:
 
-all-yes: libintl.$la intlh.inst
-all-no:
-
-libintl.a: $(OBJECTS)
+libintl.a libgnuintl.a: $(OBJECTS)
 	rm -f $@
 	$(AR) cru $@ $(OBJECTS)
 	$(RANLIB) $@
 
-libintl.la: $(OBJECTS)
-	$(LIBTOOL) --mode=link $(CC) $(LDFLAGS) -o $@ $(OBJECTS) \
-		   -version-info 1:0 -rpath $(libdir)
+libintl.la libgnuintl.la: $(OBJECTS)
+	$(LIBTOOL) --mode=link \
+	  $(CC) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) $(LDFLAGS) -o $@ \
+	  $(OBJECTS) @LIBICONV@ \
+	  -version-info $(LTV_CURRENT):$(LTV_REVISION):$(LTV_AGE) \
+	  -rpath $(libdir) \
+	  -no-undefined
 
-../po/cat-id-tbl.$lo: ../po/cat-id-tbl.c $(top_srcdir)/po/$(PACKAGE).pot
-	cd ../po && $(MAKE) cat-id-tbl.$lo
+libintl.h: libgnuintl.h
+	cp $(srcdir)/libgnuintl.h libintl.h
+
+charset.alias: config.charset
+	$(SHELL) $(srcdir)/config.charset '@host@' > t-$@
+	mv t-$@ $@
 
 check: all
 
@@ -104,36 +136,70 @@ check: all
 # only use the library should use install instead.
 
 # We must not install the libintl.h/libintl.a files if we are on a
-# system which has the gettext() function in its C library or in a
-# separate library or use the catgets interface.  A special case is
-# where configure found a previously installed GNU gettext library.
+# system which has the GNU gettext() function in its C library or in a
+# separate library.
 # If you want to use the one which comes with this version of the
 # package, you have to use `configure --with-included-gettext'.
 install: install-exec install-data
 install-exec: all
 	if test "$(PACKAGE)" = "gettext" \
 	   && test '@INTLOBJS@' = '$(GETTOBJS)'; then \
-	  if test -r $(MKINSTALLDIRS); then \
-	    $(MKINSTALLDIRS) $(libdir) $(includedir); \
+	  $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir); \
+	  $(INSTALL_DATA) libintl.h $(DESTDIR)$(includedir)/libintl.h; \
+	  $(LIBTOOL) --mode=install \
+	    $(INSTALL_DATA) libintl.$la $(DESTDIR)$(libdir)/libintl.$la; \
+	else \
+	  : ; \
+	fi
+	if test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  $(mkinstalldirs) $(DESTDIR)$(libdir); \
+	  temp=$(DESTDIR)$(libdir)/t-charset.alias; \
+	  dest=$(DESTDIR)$(libdir)/charset.alias; \
+	  if test -f $(DESTDIR)$(libdir)/charset.alias; then \
+	    orig=$(DESTDIR)$(libdir)/charset.alias; \
+	    sed -f ref-add.sed $$orig > $$temp; \
+	    $(INSTALL_DATA) $$temp $$dest; \
+	    rm -f $$temp; \
 	  else \
-	    $(top_srcdir)/mkinstalldirs $(libdir) $(includedir); \
+	    if test @GLIBC21@ = no; then \
+	      orig=charset.alias; \
+	      sed -f ref-add.sed $$orig > $$temp; \
+	      $(INSTALL_DATA) $$temp $$dest; \
+	      rm -f $$temp; \
+	    fi; \
 	  fi; \
-	  $(INSTALL_DATA) intlh.inst $(includedir)/libintl.h; \
-	  $(INSTALL_DATA) libintl.a $(libdir)/libintl.a; \
+	  $(mkinstalldirs) $(DESTDIR)$(localedir); \
+	  test -f $(DESTDIR)$(localedir)/locale.alias \
+	    && orig=$(DESTDIR)$(localedir)/locale.alias \
+	    || orig=$(srcdir)/locale.alias; \
+	  temp=$(DESTDIR)$(localedir)/t-locale.alias; \
+	  dest=$(DESTDIR)$(localedir)/locale.alias; \
+	  sed -f ref-add.sed $$orig > $$temp; \
+	  $(INSTALL_DATA) $$temp $$dest; \
+	  rm -f $$temp; \
 	else \
 	  : ; \
 	fi
 install-data: all
 	if test "$(PACKAGE)" = "gettext"; then \
-	  if test -r $(MKINSTALLDIRS); then \
-	    $(MKINSTALLDIRS) $(gettextsrcdir); \
-	  else \
-	    $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \
-	  fi; \
-	  $(INSTALL_DATA) VERSION $(gettextsrcdir)/VERSION; \
-	  dists="$(DISTFILES.common)"; \
+	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  $(INSTALL_DATA) VERSION $(DESTDIR)$(gettextsrcdir)/VERSION; \
+	  $(INSTALL_DATA) ChangeLog.inst $(DESTDIR)$(gettextsrcdir)/ChangeLog; \
+	  dists="COPYING.LIB-2 COPYING.LIB-2.1 $(DISTFILES.common)"; \
 	  for file in $$dists; do \
-	    $(INSTALL_DATA) $(srcdir)/$$file $(gettextsrcdir)/$$file; \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  chmod a+x $(DESTDIR)$(gettextsrcdir)/config.charset; \
+	  dists="$(DISTFILES.generated)"; \
+	  for file in $$dists; do \
+	    if test -f $$file; then dir=.; else dir=$(srcdir); fi; \
+	    $(INSTALL_DATA) $$dir/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  dists="$(DISTFILES.obsolete)"; \
+	  for file in $$dists; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
 	  done; \
 	else \
 	  : ; \
@@ -143,14 +209,51 @@ install-data: all
 installcheck:
 
 uninstall:
-	dists="$(DISTFILES.common)"; \
-	for file in $$dists; do \
-	  rm -f $(gettextsrcdir)/$$file; \
-	done
+	if test "$(PACKAGE)" = "gettext" \
+	   && test '@INTLOBJS@' = '$(GETTOBJS)'; then \
+	  rm -f $(DESTDIR)$(includedir)/libintl.h; \
+	  $(LIBTOOL) --mode=uninstall \
+	    rm -f $(DESTDIR)$(libdir)/libintl.$la; \
+	else \
+	  : ; \
+	fi
+	if test '@USE_INCLUDED_LIBINTL@' = yes; then \
+	  if test -f $(DESTDIR)$(libdir)/charset.alias; then \
+	    temp=$(DESTDIR)$(libdir)/t-charset.alias; \
+	    dest=$(DESTDIR)$(libdir)/charset.alias; \
+	    sed -f ref-del.sed $$dest > $$temp; \
+	    if grep '^# Packages using this file: $$' $$temp > /dev/null; then \
+	      rm -f $$dest; \
+	    else \
+	      $(INSTALL_DATA) $$temp $$dest; \
+	    fi; \
+	    rm -f $$temp; \
+	  fi; \
+	  if test -f $(DESTDIR)$(localedir)/locale.alias; then \
+	    temp=$(DESTDIR)$(localedir)/t-locale.alias; \
+	    dest=$(DESTDIR)$(localedir)/locale.alias; \
+	    sed -f ref-del.sed $$dest > $$temp; \
+	    if grep '^# Packages using this file: $$' $$temp > /dev/null; then \
+	      rm -f $$dest; \
+	    else \
+	      $(INSTALL_DATA) $$temp $$dest; \
+	    fi; \
+	    rm -f $$temp; \
+	  fi; \
+	else \
+	  : ; \
+	fi
+	if test "$(PACKAGE)" = "gettext"; then \
+	  for file in VERSION ChangeLog COPYING.LIB-2 COPYING.LIB-2.1 $(DISTFILES.common) $(DISTFILES.generated); do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
 
 info dvi:
 
-$(OBJECTS): ../config.h libgettext.h
+$(OBJECTS): ../config.h libgnuintl.h
 bindtextdom.$lo finddomain.$lo loadmsgcat.$lo: gettextP.h gettext.h loadinfo.h
 dcgettext.$lo: gettextP.h gettext.h hash-string.h loadinfo.h
 
@@ -166,12 +269,19 @@ ID: $(HEADERS) $(SOURCES)
 
 
 mostlyclean:
-	rm -f *.a *.o *.lo core core.*
+	rm -f *.a *.la *.o *.lo core core.*
+	rm -f libintl.h charset.alias ref-add.sed ref-del.sed
+	rm -f -r .libs _libs
 
 clean: mostlyclean
 
 distclean: clean
-	rm -f Makefile ID TAGS po2msg.sed po2tbl.sed libintl.h
+	rm -f Makefile ID TAGS
+	if test "$(PACKAGE)" = gettext; then \
+	  rm -f ChangeLog.inst $(DISTFILES.normal); \
+	else \
+	  : ; \
+	fi
 
 maintainer-clean: distclean
 	@echo "This command is intended for maintainers to use;"
@@ -181,34 +291,23 @@ maintainer-clean: distclean
 # GNU gettext needs not contain the file `VERSION' but contains some
 # other files which should not be distributed in other packages.
 distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir: Makefile $(DISTFILES)
+dist distdir: Makefile
 	if test "$(PACKAGE)" = gettext; then \
 	  additional="$(DISTFILES.gettext)"; \
 	else \
 	  additional="$(DISTFILES.normal)"; \
 	fi; \
-	for file in $(DISTFILES.common) $$additional; do \
-	  ln $(srcdir)/$$file $(distdir) 2> /dev/null \
-	    || cp -p $(srcdir)/$$file $(distdir); \
+	$(MAKE) $(DISTFILES.common) $(DISTFILES.generated) $$additional; \
+	for file in ChangeLog $(DISTFILES.common) $(DISTFILES.generated) $$additional; do \
+	  if test -f $$file; then dir=.; else dir=$(srcdir); fi; \
+	  ln $$dir/$$file $(distdir) 2> /dev/null \
+	    || cp -p $$dir/$$file $(distdir); \
 	done
 
-dist-libc:
-	tar zcvf intl-glibc.tar.gz $(COMSRCS) $(COMHDRS) libintl.h.glibc
-
 Makefile: Makefile.in ../config.status
 	cd .. \
 	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
 
-# The dependency for intlh.inst is different in gettext and all other
-# packages.  Because we cannot you GNU make features we have to solve
-# the problem while rewriting Makefile.in.
-@GT_YES@intlh.inst: intlh.inst.in ../config.status
-@GT_YES@	cd .. \
-@GT_YES@	&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= \
-@GT_YES@	  $(SHELL) ./config.status
-@GT_NO@.PHONY: intlh.inst
-@GT_NO@intlh.inst:
-
 # Tell versions [3.59,3.63) of GNU make not to export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

intl/VERSION

@@ -1 +1 @@
-GNU gettext library from gettext-0.10.35
+GNU gettext library from gettext-0.10.40

intl/bindtextdom.c

@@ -1,51 +1,59 @@
 /* Implementation of the bindtextdomain(3) function
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+   Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
 
 #ifdef _LIBC
 # include <libintl.h>
 #else
-# include "libgettext.h"
+# include "libgnuintl.h"
 #endif
-#include "gettext.h"
 #include "gettextP.h"
 
+#ifdef _LIBC
+/* We have to handle multi-threaded applications.  */
+# include <bits/libc-lock.h>
+#else
+/* Provide dummy implementation if this is outside glibc.  */
+# define __libc_rwlock_define(CLASS, NAME)
+# define __libc_rwlock_wrlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+   names than the internal variables in GNU libc, otherwise programs
+   using libintl.a cannot be linked statically.  */
+#if !defined _LIBC
+# define _nl_default_dirname _nl_default_dirname__
+# define _nl_domain_bindings _nl_domain_bindings__
+#endif
+
+/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>.  */
+#ifndef offsetof
+# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
+#endif
+
 /* @@ end of prolog @@ */
 
 /* Contains the default location of the message catalogs.  */
@@ -54,6 +62,9 @@ extern const char _nl_default_dirname[];
 /* List with bindings of specific domains.  */
 extern struct binding *_nl_domain_bindings;
 
+/* Lock variable to protect the global data in the gettext implementation.  */
+__libc_rwlock_define (extern, _nl_state_lock)
+
 
 /* Names for the libintl functions are a problem.  They must not clash
    with existing names and they should follow ANSI C.  But this source
@@ -61,25 +72,48 @@ extern struct binding *_nl_domain_bindings;
    prefix.  So we have to make a difference here.  */
 #ifdef _LIBC
 # define BINDTEXTDOMAIN __bindtextdomain
+# define BIND_TEXTDOMAIN_CODESET __bind_textdomain_codeset
 # ifndef strdup
 #  define strdup(str) __strdup (str)
 # endif
 #else
 # define BINDTEXTDOMAIN bindtextdomain__
+# define BIND_TEXTDOMAIN_CODESET bind_textdomain_codeset__
 #endif
 
-/* Specify that the DOMAINNAME message catalog will be found
-   in DIRNAME rather than in the system locale data base.  */
-char *
-BINDTEXTDOMAIN (domainname, dirname)
+/* Prototypes for local functions.  */
+static void set_binding_values PARAMS ((const char *domainname,
+					const char **dirnamep,
+					const char **codesetp));
+     
+/* Specifies the directory name *DIRNAMEP and the output codeset *CODESETP
+   to be used for the DOMAINNAME message catalog.
+   If *DIRNAMEP or *CODESETP is NULL, the corresponding attribute is not
+   modified, only the current value is returned.
+   If DIRNAMEP or CODESETP is NULL, the corresponding attribute is neither
+   modified nor returned.  */
+static void
+set_binding_values (domainname, dirnamep, codesetp)
      const char *domainname;
-     const char *dirname;
+     const char **dirnamep;
+     const char **codesetp;
 {
   struct binding *binding;
+  int modified;
 
   /* Some sanity checks.  */
   if (domainname == NULL || domainname[0] == '\0')
-    return NULL;
+    {
+      if (dirnamep)
+	*dirnamep = NULL;
+      if (codesetp)
+	*codesetp = NULL;
+      return;
+    }
+
+  __libc_rwlock_wrlock (_nl_state_lock);
+
+  modified = 0;
 
   for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
     {
@@ -95,83 +129,173 @@ BINDTEXTDOMAIN (domainname, dirname)
 	}
     }
 
-  if (dirname == NULL)
-    /* The current binding has be to returned.  */
-    return binding == NULL ? (char *) _nl_default_dirname : binding->dirname;
-
   if (binding != NULL)
     {
-      /* The domain is already bound.  If the new value and the old
-	 one are equal we simply do nothing.  Otherwise replace the
-	 old binding.  */
-      if (strcmp (dirname, binding->dirname) != 0)
+      if (dirnamep)
 	{
-	  char *new_dirname;
+	  const char *dirname = *dirnamep;
 
-	  if (strcmp (dirname, _nl_default_dirname) == 0)
-	    new_dirname = (char *) _nl_default_dirname;
+	  if (dirname == NULL)
+	    /* The current binding has be to returned.  */
+	    *dirnamep = binding->dirname;
 	  else
 	    {
+	      /* The domain is already bound.  If the new value and the old
+		 one are equal we simply do nothing.  Otherwise replace the
+		 old binding.  */
+	      char *result = binding->dirname;
+	      if (strcmp (dirname, result) != 0)
+		{
+		  if (strcmp (dirname, _nl_default_dirname) == 0)
+		    result = (char *) _nl_default_dirname;
+		  else
+		    {
 #if defined _LIBC || defined HAVE_STRDUP
-	      new_dirname = strdup (dirname);
-	      if (new_dirname == NULL)
-		return NULL;
+		      result = strdup (dirname);
 #else
-	      size_t len = strlen (dirname) + 1;
-	      new_dirname = (char *) malloc (len);
-	      if (new_dirname == NULL)
-		return NULL;
-
-	      memcpy (new_dirname, dirname, len);
+		      size_t len = strlen (dirname) + 1;
+		      result = (char *) malloc (len);
+		      if (__builtin_expect (result != NULL, 1))
+			memcpy (result, dirname, len);
 #endif
+		    }
+
+		  if (__builtin_expect (result != NULL, 1))
+		    {
+		      if (binding->dirname != _nl_default_dirname)
+			free (binding->dirname);
+
+		      binding->dirname = result;
+		      modified = 1;
+		    }
+		}
+	      *dirnamep = result;
 	    }
-
-	  if (binding->dirname != _nl_default_dirname)
-	    free (binding->dirname);
-
-	  binding->dirname = new_dirname;
 	}
+
+      if (codesetp)
+	{
+	  const char *codeset = *codesetp;
+
+	  if (codeset == NULL)
+	    /* The current binding has be to returned.  */
+	    *codesetp = binding->codeset;
+	  else
+	    {
+	      /* The domain is already bound.  If the new value and the old
+		 one are equal we simply do nothing.  Otherwise replace the
+		 old binding.  */
+	      char *result = binding->codeset;
+	      if (result == NULL || strcmp (codeset, result) != 0)
+		{
+#if defined _LIBC || defined HAVE_STRDUP
+		  result = strdup (codeset);
+#else
+		  size_t len = strlen (codeset) + 1;
+		  result = (char *) malloc (len);
+		  if (__builtin_expect (result != NULL, 1))
+		    memcpy (result, codeset, len);
+#endif
+
+		  if (__builtin_expect (result != NULL, 1))
+		    {
+		      if (binding->codeset != NULL)
+			free (binding->codeset);
+
+		      binding->codeset = result;
+		      binding->codeset_cntr++;
+		      modified = 1;
+		    }
+		}
+	      *codesetp = result;
+	    }
+	}
+    }
+  else if ((dirnamep == NULL || *dirnamep == NULL)
+	   && (codesetp == NULL || *codesetp == NULL))
+    {
+      /* Simply return the default values.  */
+      if (dirnamep)
+	*dirnamep = _nl_default_dirname;
+      if (codesetp)
+	*codesetp = NULL;
     }
   else
     {
       /* We have to create a new binding.  */
-#if !defined _LIBC && !defined HAVE_STRDUP
-      size_t len;
-#endif
+      size_t len = strlen (domainname) + 1;
       struct binding *new_binding =
-	(struct binding *) malloc (sizeof (*new_binding));
+	(struct binding *) malloc (offsetof (struct binding, domainname) + len);
 
-      if (new_binding == NULL)
-	return NULL;
+      if (__builtin_expect (new_binding == NULL, 0))
+	goto failed;
 
-#if defined _LIBC || defined HAVE_STRDUP
-      new_binding->domainname = strdup (domainname);
-      if (new_binding->domainname == NULL)
-	return NULL;
-#else
-      len = strlen (domainname) + 1;
-      new_binding->domainname = (char *) malloc (len);
-      if (new_binding->domainname == NULL)
-	return NULL;
       memcpy (new_binding->domainname, domainname, len);
-#endif
 
-      if (strcmp (dirname, _nl_default_dirname) == 0)
-	new_binding->dirname = (char *) _nl_default_dirname;
-      else
+      if (dirnamep)
 	{
+	  const char *dirname = *dirnamep;
+
+	  if (dirname == NULL)
+	    /* The default value.  */
+	    dirname = _nl_default_dirname;
+	  else
+	    {
+	      if (strcmp (dirname, _nl_default_dirname) == 0)
+		dirname = _nl_default_dirname;
+	      else
+		{
+		  char *result;
 #if defined _LIBC || defined HAVE_STRDUP
-	  new_binding->dirname = strdup (dirname);
-	  if (new_binding->dirname == NULL)
-	    return NULL;
+		  result = strdup (dirname);
+		  if (__builtin_expect (result == NULL, 0))
+		    goto failed_dirname;
 #else
-	  len = strlen (dirname) + 1;
-	  new_binding->dirname = (char *) malloc (len);
-	  if (new_binding->dirname == NULL)
-	    return NULL;
-	  memcpy (new_binding->dirname, dirname, len);
+		  size_t len = strlen (dirname) + 1;
+		  result = (char *) malloc (len);
+		  if (__builtin_expect (result == NULL, 0))
+		    goto failed_dirname;
+		  memcpy (result, dirname, len);
 #endif
+		  dirname = result;
+		}
+	    }
+	  *dirnamep = dirname;
+	  new_binding->dirname = (char *) dirname;
 	}
+      else
+	/* The default value.  */
+	new_binding->dirname = (char *) _nl_default_dirname;
+
+      new_binding->codeset_cntr = 0;
+
+      if (codesetp)
+	{
+	  const char *codeset = *codesetp;
+
+	  if (codeset != NULL)
+	    {
+	      char *result;
+
+#if defined _LIBC || defined HAVE_STRDUP
+	      result = strdup (codeset);
+	      if (__builtin_expect (result == NULL, 0))
+		goto failed_codeset;
+#else
+	      size_t len = strlen (codeset) + 1;
+	      result = (char *) malloc (len);
+	      if (__builtin_expect (result == NULL, 0))
+		goto failed_codeset;
+	      memcpy (result, codeset, len);
+#endif
+	      codeset = result;
+	      new_binding->codeset_cntr++;
+	    }
+	  *codesetp = codeset;
+	  new_binding->codeset = (char *) codeset;
+	}
+      else
+	new_binding->codeset = NULL;
 
       /* Now enqueue it.  */
       if (_nl_domain_bindings == NULL
@@ -191,13 +315,55 @@ BINDTEXTDOMAIN (domainname, dirname)
 	  binding->next = new_binding;
 	}
 
-      binding = new_binding;
+      modified = 1;
+
+      /* Here we deal with memory allocation failures.  */
+      if (0)
+	{
+	failed_codeset:
+	  if (new_binding->dirname != _nl_default_dirname)
+	    free (new_binding->dirname);
+	failed_dirname:
+	  free (new_binding);
+	failed:
+	  if (dirnamep)
+	    *dirnamep = NULL;
+	  if (codesetp)
+	    *codesetp = NULL;
+	}
     }
 
-  return binding->dirname;
+  /* If we modified any binding, we flush the caches.  */
+  if (modified)
+    ++_nl_msg_cat_cntr;
+
+  __libc_rwlock_unlock (_nl_state_lock);
+}
+
+/* Specify that the DOMAINNAME message catalog will be found
+   in DIRNAME rather than in the system locale data base.  */
+char *
+BINDTEXTDOMAIN (domainname, dirname)
+     const char *domainname;
+     const char *dirname;
+{
+  set_binding_values (domainname, &dirname, NULL);
+  return (char *) dirname;
+}
+
+/* Specify the character encoding in which the messages from the
+   DOMAINNAME message catalog will be returned.  */
+char *
+BIND_TEXTDOMAIN_CODESET (domainname, codeset)
+     const char *domainname;
+     const char *codeset;
+{
+  set_binding_values (domainname, NULL, &codeset);
+  return (char *) codeset;
 }
 
 #ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
+/* Aliases for function names in GNU C Library.  */
 weak_alias (__bindtextdomain, bindtextdomain);
+weak_alias (__bind_textdomain_codeset, bind_textdomain_codeset);
 #endif

intl/cat-compat.c

@@ -1,262 +0,0 @@
-/* Compatibility code for gettext-using-catgets interface.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <string.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# endif
-#endif
-
-#ifdef HAVE_NL_TYPES_H
-# include <nl_types.h>
-#endif
-
-#include "libgettext.h"
-
-/* @@ end of prolog @@ */
-
-/* XPG3 defines the result of `setlocale (category, NULL)' as:
-   ``Directs `setlocale()' to query `category' and return the current
-     setting of `local'.''
-   However it does not specify the exact format.  And even worse: POSIX
-   defines this not at all.  So we can use this feature only on selected
-   system (e.g. those using GNU C Library).  */
-#ifdef _LIBC
-# define HAVE_LOCALE_NULL
-#endif
-
-/* The catalog descriptor.  */
-static nl_catd catalog = (nl_catd) -1;
-
-/* Name of the default catalog.  */
-static const char default_catalog_name[] = "messages";
-
-/* Name of currently used catalog.  */
-static const char *catalog_name = default_catalog_name;
-
-/* Get ID for given string.  If not found return -1.  */
-static int msg_to_cat_id PARAMS ((const char *msg));
-
-/* Substitution for systems lacking this function in their C library.  */
-#if !_LIBC && !HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-#endif
-
-
-/* Set currently used domain/catalog.  */
-char *
-textdomain (domainname)
-     const char *domainname;
-{
-  nl_catd new_catalog;
-  char *new_name;
-  size_t new_name_len;
-  char *lang;
-
-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES \
-    && defined HAVE_LOCALE_NULL
-  lang = setlocale (LC_MESSAGES, NULL);
-#else
-  lang = getenv ("LC_ALL");
-  if (lang == NULL || lang[0] == '\0')
-    {
-      lang = getenv ("LC_MESSAGES");
-      if (lang == NULL || lang[0] == '\0')
-	lang = getenv ("LANG");
-    }
-#endif
-  if (lang == NULL || lang[0] == '\0')
-    lang = "C";
-
-  /* See whether name of currently used domain is asked.  */
-  if (domainname == NULL)
-    return (char *) catalog_name;
-
-  if (domainname[0] == '\0')
-    domainname = default_catalog_name;
-
-  /* Compute length of added path element.  */
-  new_name_len = sizeof (LOCALEDIR) - 1 + 1 + strlen (lang)
-		 + sizeof ("/LC_MESSAGES/") - 1 + sizeof (PACKAGE) - 1
-		 + sizeof (".cat");
-
-  new_name = (char *) malloc (new_name_len);
-  if (new_name == NULL)
-    return NULL;
-
-  strcpy (new_name, PACKAGE);
-  new_catalog = catopen (new_name, 0);
-
-  if (new_catalog == (nl_catd) -1)
-    {
-      /* NLSPATH search didn't work, try absolute path */
-      sprintf (new_name, "%s/%s/LC_MESSAGES/%s.cat", LOCALEDIR, lang,
-	       PACKAGE);
-      new_catalog = catopen (new_name, 0);
-
-      if (new_catalog == (nl_catd) -1)
-	{
-	  free (new_name);
-	  return (char *) catalog_name;
-	}
-    }
-
-  /* Close old catalog.  */
-  if (catalog != (nl_catd) -1)
-    catclose (catalog);
-  if (catalog_name != default_catalog_name)
-    free ((char *) catalog_name);
-
-  catalog = new_catalog;
-  catalog_name = new_name;
-
-  return (char *) catalog_name;
-}
-
-char *
-bindtextdomain (domainname, dirname)
-     const char *domainname;
-     const char *dirname;
-{
-#if HAVE_SETENV || HAVE_PUTENV
-  char *old_val, *new_val, *cp;
-  size_t new_val_len;
-
-  /* This does not make much sense here but to be compatible do it.  */
-  if (domainname == NULL)
-    return NULL;
-
-  /* Compute length of added path element.  If we use setenv we don't need
-     the first byts for NLSPATH=, but why complicate the code for this
-     peanuts.  */
-  new_val_len = sizeof ("NLSPATH=") - 1 + strlen (dirname)
-		+ sizeof ("/%L/LC_MESSAGES/%N.cat");
-
-  old_val = getenv ("NLSPATH");
-  if (old_val == NULL || old_val[0] == '\0')
-    {
-      old_val = NULL;
-      new_val_len += 1 + sizeof (LOCALEDIR) - 1
-	             + sizeof ("/%L/LC_MESSAGES/%N.cat");
-    }
-  else
-    new_val_len += strlen (old_val);
-
-  new_val = (char *) malloc (new_val_len);
-  if (new_val == NULL)
-    return NULL;
-
-# if HAVE_SETENV
-  cp = new_val;
-# else
-  cp = stpcpy (new_val, "NLSPATH=");
-# endif
-
-  cp = stpcpy (cp, dirname);
-  cp = stpcpy (cp, "/%L/LC_MESSAGES/%N.cat:");
-
-  if (old_val == NULL)
-    {
-# if __STDC__
-      stpcpy (cp, LOCALEDIR "/%L/LC_MESSAGES/%N.cat");
-# else
-
-      cp = stpcpy (cp, LOCALEDIR);
-      stpcpy (cp, "/%L/LC_MESSAGES/%N.cat");
-# endif
-    }
-  else
-    stpcpy (cp, old_val);
-
-# if HAVE_SETENV
-  setenv ("NLSPATH", new_val, 1);
-  free (new_val);
-# else
-  putenv (new_val);
-  /* Do *not* free the environment entry we just entered.  It is used
-     from now on.   */
-# endif
-
-#endif
-
-  return (char *) domainname;
-}
-
-#undef gettext
-char *
-gettext (msg)
-     const char *msg;
-{
-  int msgid;
-
-  if (msg == NULL || catalog == (nl_catd) -1)
-    return (char *) msg;
-
-  /* Get the message from the catalog.  We always use set number 1.
-     The message ID is computed by the function `msg_to_cat_id'
-     which works on the table generated by `po-to-tbl'.  */
-  msgid = msg_to_cat_id (msg);
-  if (msgid == -1)
-    return (char *) msg;
-
-  return catgets (catalog, 1, msgid, (char *) msg);
-}
-
-/* Look through the table `_msg_tbl' which has `_msg_tbl_length' entries
-   for the one equal to msg.  If it is found return the ID.  In case when
-   the string is not found return -1.  */
-static int
-msg_to_cat_id (msg)
-     const char *msg;
-{
-  int cnt;
-
-  for (cnt = 0; cnt < _msg_tbl_length; ++cnt)
-    if (strcmp (msg, _msg_tbl[cnt]._msg) == 0)
-      return _msg_tbl[cnt]._msg_number;
-
-  return -1;
-}
-
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library.  So we
-   avoid the non-standard function stpcpy.  In GNU C Library this
-   function is available, though.  Also allow the symbol HAVE_STPCPY
-   to be defined.  */
-#if !_LIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-#endif

intl/config.charset

@@ -0,0 +1,438 @@
+#! /bin/sh
+# Output a system dependent table of character encoding aliases.
+#
+#   Copyright (C) 2000-2001 Free Software Foundation, Inc.
+#
+#   This program is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU Library General Public License as published
+#   by the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   Library General Public License for more details.
+#
+#   You should have received a copy of the GNU Library General Public
+#   License along with this program; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+#   USA.
+#
+# The table consists of lines of the form
+#    ALIAS  CANONICAL
+#
+# ALIAS is the (system dependent) result of "nl_langinfo (CODESET)".
+# ALIAS is compared in a case sensitive way.
+#
+# CANONICAL is the GNU canonical name for this character encoding.
+# It must be an encoding supported by libiconv. Support by GNU libc is
+# also desirable. CANONICAL is case insensitive. Usually an upper case
+# MIME charset name is preferred.
+# The current list of GNU canonical charset names is as follows.
+#
+#       name                         used by which systems         a MIME name?
+#   ASCII, ANSI_X3.4-1968     glibc solaris freebsd
+#   ISO-8859-1                glibc aix hpux irix osf solaris freebsd   yes
+#   ISO-8859-2                glibc aix hpux irix osf solaris freebsd   yes
+#   ISO-8859-3                glibc                                     yes
+#   ISO-8859-4                osf solaris freebsd                       yes
+#   ISO-8859-5                glibc aix hpux irix osf solaris freebsd   yes
+#   ISO-8859-6                glibc aix hpux solaris                    yes
+#   ISO-8859-7                glibc aix hpux irix osf solaris           yes
+#   ISO-8859-8                glibc aix hpux osf solaris                yes
+#   ISO-8859-9                glibc aix hpux irix osf solaris           yes
+#   ISO-8859-13               glibc
+#   ISO-8859-15               glibc aix osf solaris freebsd
+#   KOI8-R                    glibc solaris freebsd                     yes
+#   KOI8-U                    glibc freebsd                             yes
+#   CP437                     dos
+#   CP775                     dos
+#   CP850                     aix osf dos
+#   CP852                     dos
+#   CP855                     dos
+#   CP856                     aix
+#   CP857                     dos
+#   CP861                     dos
+#   CP862                     dos
+#   CP864                     dos
+#   CP865                     dos
+#   CP866                     freebsd dos
+#   CP869                     dos
+#   CP874                     win32 dos
+#   CP922                     aix
+#   CP932                     aix win32 dos
+#   CP943                     aix
+#   CP949                     osf win32 dos
+#   CP950                     win32 dos
+#   CP1046                    aix
+#   CP1124                    aix
+#   CP1129                    aix
+#   CP1250                    win32
+#   CP1251                    glibc win32
+#   CP1252                    aix win32
+#   CP1253                    win32
+#   CP1254                    win32
+#   CP1255                    win32
+#   CP1256                    win32
+#   CP1257                    win32
+#   GB2312                    glibc aix hpux irix solaris freebsd       yes
+#   EUC-JP                    glibc aix hpux irix osf solaris freebsd   yes
+#   EUC-KR                    glibc aix hpux irix osf solaris freebsd   yes
+#   EUC-TW                    glibc aix hpux irix osf solaris
+#   BIG5                      glibc aix hpux osf solaris freebsd        yes
+#   BIG5-HKSCS                glibc
+#   GBK                       aix osf win32 dos
+#   GB18030                   glibc
+#   SHIFT_JIS                 hpux osf solaris freebsd                  yes
+#   JOHAB                     glibc win32
+#   TIS-620                   glibc aix hpux osf solaris
+#   VISCII                    glibc                                     yes
+#   HP-ROMAN8                 hpux
+#   HP-ARABIC8                hpux
+#   HP-GREEK8                 hpux
+#   HP-HEBREW8                hpux
+#   HP-TURKISH8               hpux
+#   HP-KANA8                  hpux
+#   DEC-KANJI                 osf
+#   DEC-HANYU                 osf
+#   UTF-8                     glibc aix hpux osf solaris                yes
+#
+# Note: Names which are not marked as being a MIME name should not be used in
+# Internet protocols for information interchange (mail, news, etc.).
+#
+# Note: ASCII and ANSI_X3.4-1968 are synonymous canonical names. Applications
+# must understand both names and treat them as equivalent.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+
+host="$1"
+os=`echo "$host" | sed -e 's/^[^-]*-[^-]*-\(.*\)$/\1/'`
+echo "# This file contains a table of character encoding aliases,"
+echo "# suitable for operating system '${os}'."
+echo "# It was automatically generated from config.charset."
+# List of references, updated during installation:
+echo "# Packages using this file: "
+case "$os" in
+    linux* | *-gnu*)
+	# With glibc-2.1 or newer, we don't need any canonicalization,
+	# because glibc has iconv and both glibc and libiconv support all
+	# GNU canonical names directly. Therefore, the Makefile does not
+	# need to install the alias file at all.
+	# The following applies only to glibc-2.0.x and older libcs.
+	echo "ISO_646.IRV:1983 ASCII"
+	;;
+    aix*)
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-6 ISO-8859-6"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-8 ISO-8859-8"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "ISO8859-15 ISO-8859-15"
+	echo "IBM-850 CP850"
+	echo "IBM-856 CP856"
+	echo "IBM-921 ISO-8859-13"
+	echo "IBM-922 CP922"
+	echo "IBM-932 CP932"
+	echo "IBM-943 CP943"
+	echo "IBM-1046 CP1046"
+	echo "IBM-1124 CP1124"
+	echo "IBM-1129 CP1129"
+	echo "IBM-1252 CP1252"
+	echo "IBM-eucCN GB2312"
+	echo "IBM-eucJP EUC-JP"
+	echo "IBM-eucKR EUC-KR"
+	echo "IBM-eucTW EUC-TW"
+	echo "big5 BIG5"
+	echo "GBK GBK"
+	echo "TIS-620 TIS-620"
+	echo "UTF-8 UTF-8"
+	;;
+    hpux*)
+	echo "iso88591 ISO-8859-1"
+	echo "iso88592 ISO-8859-2"
+	echo "iso88595 ISO-8859-5"
+	echo "iso88596 ISO-8859-6"
+	echo "iso88597 ISO-8859-7"
+	echo "iso88598 ISO-8859-8"
+	echo "iso88599 ISO-8859-9"
+	echo "iso885915 ISO-8859-15"
+	echo "roman8 HP-ROMAN8"
+	echo "arabic8 HP-ARABIC8"
+	echo "greek8 HP-GREEK8"
+	echo "hebrew8 HP-HEBREW8"
+	echo "turkish8 HP-TURKISH8"
+	echo "kana8 HP-KANA8"
+	echo "tis620 TIS-620"
+	echo "big5 BIG5"
+	echo "eucJP EUC-JP"
+	echo "eucKR EUC-KR"
+	echo "eucTW EUC-TW"
+	echo "hp15CN GB2312"
+	#echo "ccdc ?" # what is this?
+	echo "SJIS SHIFT_JIS"
+	echo "utf8 UTF-8"
+	;;
+    irix*)
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "eucCN GB2312"
+	echo "eucJP EUC-JP"
+	echo "eucKR EUC-KR"
+	echo "eucTW EUC-TW"
+	;;
+    osf*)
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-4 ISO-8859-4"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-8 ISO-8859-8"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "ISO8859-15 ISO-8859-15"
+	echo "cp850 CP850"
+	echo "big5 BIG5"
+	echo "dechanyu DEC-HANYU"
+	echo "dechanzi GB2312"
+	echo "deckanji DEC-KANJI"
+	echo "deckorean EUC-KR"
+	echo "eucJP EUC-JP"
+	echo "eucKR EUC-KR"
+	echo "eucTW EUC-TW"
+	echo "GBK GBK"
+	echo "KSC5601 CP949"
+	echo "sdeckanji EUC-JP"
+	echo "SJIS SHIFT_JIS"
+	echo "TACTIS TIS-620"
+	echo "UTF-8 UTF-8"
+	;;
+    solaris*)
+	echo "646 ASCII"
+	echo "ISO8859-1 ISO-8859-1"
+	echo "ISO8859-2 ISO-8859-2"
+	echo "ISO8859-4 ISO-8859-4"
+	echo "ISO8859-5 ISO-8859-5"
+	echo "ISO8859-6 ISO-8859-6"
+	echo "ISO8859-7 ISO-8859-7"
+	echo "ISO8859-8 ISO-8859-8"
+	echo "ISO8859-9 ISO-8859-9"
+	echo "ISO8859-15 ISO-8859-15"
+	echo "koi8-r KOI8-R"
+	echo "BIG5 BIG5"
+	echo "gb2312 GB2312"
+	echo "cns11643 EUC-TW"
+	echo "5601 EUC-KR"
+	echo "eucJP EUC-JP"
+	echo "PCK SHIFT_JIS"
+	echo "TIS620.2533 TIS-620"
+	#echo "sun_eu_greek ?" # what is this?
+	echo "UTF-8 UTF-8"
+	;;
+    freebsd*)
+	# FreeBSD 4.2 doesn't have nl_langinfo(CODESET); therefore
+	# localcharset.c falls back to using the full locale name
+	# from the environment variables.
+	echo "C ASCII"
+	echo "US-ASCII ASCII"
+	for l in la_LN lt_LN; do
+	  echo "$l.ASCII ASCII"
+	done
+	for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \
+	         fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT la_LN \
+	         lt_LN nl_BE nl_NL no_NO pt_PT sv_SE; do
+	  echo "$l.ISO_8859-1 ISO-8859-1"
+	  echo "$l.DIS_8859-15 ISO-8859-15"
+	done
+	for l in cs_CZ hr_HR hu_HU la_LN lt_LN pl_PL sl_SI; do
+	  echo "$l.ISO_8859-2 ISO-8859-2"
+	done
+	for l in la_LN lt_LT; do
+	  echo "$l.ISO_8859-4 ISO-8859-4"
+	done
+	for l in ru_RU ru_SU; do
+	  echo "$l.KOI8-R KOI8-R"
+	  echo "$l.ISO_8859-5 ISO-8859-5"
+	  echo "$l.CP866 CP866"
+	done
+	echo "uk_UA.KOI8-U KOI8-U"
+	echo "zh_TW.BIG5 BIG5"
+	echo "zh_TW.Big5 BIG5"
+	echo "zh_CN.EUC GB2312"
+	echo "ja_JP.EUC EUC-JP"
+	echo "ja_JP.SJIS SHIFT_JIS"
+	echo "ja_JP.Shift_JIS SHIFT_JIS"
+	echo "ko_KR.EUC EUC-KR"
+	;;
+    beos*)
+	# BeOS has a single locale, and it has UTF-8 encoding.
+	echo "* UTF-8"
+	;;
+    msdosdjgpp*)
+	# DJGPP 2.03 doesn't have nl_langinfo(CODESET); therefore
+	# localcharset.c falls back to using the full locale name
+	# from the environment variables.
+	echo "#"
+	echo "# The encodings given here may not all be correct."
+	echo "# If you find that the encoding given for your language and"
+	echo "# country is not the one your DOS machine actually uses, just"
+	echo "# correct it in this file, and send a mail to"
+	echo "# Juan Manuel Guerrero <st001906@hrz1.hrz.tu-darmstadt.de>"
+	echo "# and Bruno Haible <haible@clisp.cons.org>."
+	echo "#"
+	echo "C ASCII"
+	# ISO-8859-1 languages
+	echo "ca CP850"
+	echo "ca_ES CP850"
+	echo "da CP865"    # not CP850 ??
+	echo "da_DK CP865" # not CP850 ??
+	echo "de CP850"
+	echo "de_AT CP850"
+	echo "de_CH CP850"
+	echo "de_DE CP850"
+	echo "en CP850"
+	echo "en_AU CP850" # not CP437 ??
+	echo "en_CA CP850"
+	echo "en_GB CP850"
+	echo "en_NZ CP437"
+	echo "en_US CP437"
+	echo "en_ZA CP850" # not CP437 ??
+	echo "es CP850"
+	echo "es_AR CP850"
+	echo "es_BO CP850"
+	echo "es_CL CP850"
+	echo "es_CO CP850"
+	echo "es_CR CP850"
+	echo "es_CU CP850"
+	echo "es_DO CP850"
+	echo "es_EC CP850"
+	echo "es_ES CP850"
+	echo "es_GT CP850"
+	echo "es_HN CP850"
+	echo "es_MX CP850"
+	echo "es_NI CP850"
+	echo "es_PA CP850"
+	echo "es_PY CP850"
+	echo "es_PE CP850"
+	echo "es_SV CP850"
+	echo "es_UY CP850"
+	echo "es_VE CP850"
+	echo "et CP850"
+	echo "et_EE CP850"
+	echo "eu CP850"
+	echo "eu_ES CP850"
+	echo "fi CP850"
+	echo "fi_FI CP850"
+	echo "fr CP850"
+	echo "fr_BE CP850"
+	echo "fr_CA CP850"
+	echo "fr_CH CP850"
+	echo "fr_FR CP850"
+	echo "ga CP850"
+	echo "ga_IE CP850"
+	echo "gd CP850"
+	echo "gd_GB CP850"
+	echo "gl CP850"
+	echo "gl_ES CP850"
+	echo "id CP850"    # not CP437 ??
+	echo "id_ID CP850" # not CP437 ??
+	echo "is CP861"    # not CP850 ??
+	echo "is_IS CP861" # not CP850 ??
+	echo "it CP850"
+	echo "it_CH CP850"
+	echo "it_IT CP850"
+	echo "lt CP775"
+	echo "lt_LT CP775"
+	echo "lv CP775"
+	echo "lv_LV CP775"
+	echo "nb CP865"    # not CP850 ??
+	echo "nb_NO CP865" # not CP850 ??
+	echo "nl CP850"
+	echo "nl_BE CP850"
+	echo "nl_NL CP850"
+	echo "nn CP865"    # not CP850 ??
+	echo "nn_NO CP865" # not CP850 ??
+	echo "no CP865"    # not CP850 ??
+	echo "no_NO CP865" # not CP850 ??
+	echo "pt CP850"
+	echo "pt_BR CP850"
+	echo "pt_PT CP850"
+	echo "sv CP850"
+	echo "sv_SE CP850"
+	# ISO-8859-2 languages
+	echo "cs CP852"
+	echo "cs_CZ CP852"
+	echo "hr CP852"
+	echo "hr_HR CP852"
+	echo "hu CP852"
+	echo "hu_HU CP852"
+	echo "pl CP852"
+	echo "pl_PL CP852"
+	echo "ro CP852"
+	echo "ro_RO CP852"
+	echo "sk CP852"
+	echo "sk_SK CP852"
+	echo "sl CP852"
+	echo "sl_SI CP852"
+	echo "sq CP852"
+	echo "sq_AL CP852"
+	echo "sr CP852"    # CP852 or CP866 or CP855 ??
+	echo "sr_YU CP852" # CP852 or CP866 or CP855 ??
+	# ISO-8859-3 languages
+	echo "mt CP850"
+	echo "mt_MT CP850"
+	# ISO-8859-5 languages
+	echo "be CP866"
+	echo "be_BE CP866"
+	echo "bg CP866"    # not CP855 ??
+	echo "bg_BG CP866" # not CP855 ??
+	echo "mk CP866"    # not CP855 ??
+	echo "mk_MK CP866" # not CP855 ??
+	echo "ru KOI8-R"    # not CP866 ??
+	echo "ru_RU KOI8-R" # not CP866 ??
+	# ISO-8859-6 languages
+	echo "ar CP864"
+	echo "ar_AE CP864"
+	echo "ar_DZ CP864"
+	echo "ar_EG CP864"
+	echo "ar_IQ CP864"
+	echo "ar_IR CP864"
+	echo "ar_JO CP864"
+	echo "ar_KW CP864"
+	echo "ar_MA CP864"
+	echo "ar_OM CP864"
+	echo "ar_QA CP864"
+	echo "ar_SA CP864"
+	echo "ar_SY CP864"
+	# ISO-8859-7 languages
+	echo "el CP869"
+	echo "el_GR CP869"
+	# ISO-8859-8 languages
+	echo "he CP862"
+	echo "he_IL CP862"
+	# ISO-8859-9 languages
+	echo "tr CP857"
+	echo "tr_TR CP857"
+	# Japanese
+	echo "ja CP932"
+	echo "ja_JP CP932"
+	# Chinese
+	echo "zh_CN GBK"
+	echo "zh_TW CP950" # not CP938 ??
+	# Korean
+	echo "kr CP949"    # not CP934 ??
+	echo "kr_KR CP949" # not CP934 ??
+	# Thai
+	echo "th CP874"
+	echo "th_TH CP874"
+	# Other
+	echo "eo CP850"
+	echo "eo_EO CP850"
+	;;
+esac

intl/dcgettext.c

@@ -1,238 +1,44 @@
 /* Implementation of the dcgettext(3) function.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-#include <sys/types.h>
-
-#if defined __GNUC__ && !defined C_ALLOCA
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if (defined HAVE_ALLOCA_H || defined _LIBC) && !defined C_ALLOCA
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #pragma alloca
-#  else
-#   ifndef alloca
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-#ifndef __set_errno
-# define __set_errno(val) errno = (val)
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-#  define _GNU_SOURCE	1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#include "gettext.h"
 #include "gettextP.h"
 #ifdef _LIBC
 # include <libintl.h>
 #else
-# include "libgettext.h"
+# include "libgnuintl.h"
 #endif
-#include "hash-string.h"
 
 /* @@ end of prolog @@ */
 
-#ifdef _LIBC
-/* Rename the non ANSI C functions.  This is required by the standard
-   because some ANSI C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# define getcwd __getcwd
-# ifndef stpcpy
-#  define stpcpy __stpcpy
-# endif
-#else
-# if !defined HAVE_GETCWD
-char *getwd ();
-#  define getcwd(buf, max) getwd (buf)
-# else
-char *getcwd ();
-# endif
-# ifndef HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-# endif
-#endif
-
-/* Amount to increase buffer size by in each try.  */
-#define PATH_INCR 32
-
-/* The following is from pathmax.h.  */
-/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
-   PATH_MAX but might cause redefinition warnings when sys/param.h is
-   later included (as on MORE/BSD 4.3).  */
-#if defined(_POSIX_VERSION) || (defined(HAVE_LIMITS_H) && !defined(__GNUC__))
-# include <limits.h>
-#endif
-
-#ifndef _POSIX_PATH_MAX
-# define _POSIX_PATH_MAX 255
-#endif
-
-#if !defined(PATH_MAX) && defined(_PC_PATH_MAX)
-# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
-#endif
-
-/* Don't include sys/param.h if it already has been.  */
-#if defined(HAVE_SYS_PARAM_H) && !defined(PATH_MAX) && !defined(MAXPATHLEN)
-# include <sys/param.h>
-#endif
-
-#if !defined(PATH_MAX) && defined(MAXPATHLEN)
-# define PATH_MAX MAXPATHLEN
-#endif
-
-#ifndef PATH_MAX
-# define PATH_MAX _POSIX_PATH_MAX
-#endif
-
-/* XPG3 defines the result of `setlocale (category, NULL)' as:
-   ``Directs `setlocale()' to query `category' and return the current
-     setting of `local'.''
-   However it does not specify the exact format.  And even worse: POSIX
-   defines this not at all.  So we can use this feature only on selected
-   system (e.g. those using GNU C Library).  */
-#ifdef _LIBC
-# define HAVE_LOCALE_NULL
-#endif
-
-/* Name of the default domain used for gettext(3) prior any call to
-   textdomain(3).  The default value for this is "messages".  */
-const char _nl_default_default_domain[] = "messages";
-
-/* Value used as the default domain for gettext(3).  */
-const char *_nl_current_default_domain = _nl_default_default_domain;
-
-/* Contains the default location of the message catalogs.  */
-const char _nl_default_dirname[] = GNULOCALEDIR;
-
-/* List with bindings of specific domains created by bindtextdomain()
-   calls.  */
-struct binding *_nl_domain_bindings;
-
-/* Prototypes for local functions.  */
-static char *find_msg PARAMS ((struct loaded_l10nfile *domain_file,
-			       const char *msgid)) internal_function;
-static const char *category_to_name PARAMS ((int category)) internal_function;
-static const char *guess_category_value PARAMS ((int category,
-						 const char *categoryname))
-     internal_function;
-
-
-/* For those loosing systems which don't have `alloca' we have to add
-   some additional code emulating it.  */
-#ifdef HAVE_ALLOCA
-/* Nothing has to be done.  */
-# define ADD_BLOCK(list, address) /* nothing */
-# define FREE_BLOCKS(list) /* nothing */
-#else
-struct block_list
-{
-  void *address;
-  struct block_list *next;
-};
-# define ADD_BLOCK(list, addr)						      \
-  do {									      \
-    struct block_list *newp = (struct block_list *) malloc (sizeof (*newp));  \
-    /* If we cannot get a free block we cannot add the new element to	      \
-       the list.  */							      \
-    if (newp != NULL) {							      \
-      newp->address = (addr);						      \
-      newp->next = (list);						      \
-      (list) = newp;							      \
-    }									      \
-  } while (0)
-# define FREE_BLOCKS(list)						      \
-  do {									      \
-    while (list != NULL) {						      \
-      struct block_list *old = list;					      \
-      list = list->next;						      \
-      free (old);							      \
-    }									      \
-  } while (0)
-# undef alloca
-# define alloca(size) (malloc (size))
-#endif	/* have alloca */
-
-
 /* Names for the libintl functions are a problem.  They must not clash
    with existing names and they should follow ANSI C.  But this source
    code is also used in GNU C Library where the names have a __
    prefix.  So we have to make a difference here.  */
 #ifdef _LIBC
 # define DCGETTEXT __dcgettext
+# define DCIGETTEXT __dcigettext
 #else
 # define DCGETTEXT dcgettext__
-#endif
-
-/* Checking whether the binaries runs SUID must be done and glibc provides
-   easier methods therefore we make a difference here.  */
-#ifdef _LIBC
-# define ENABLE_SECURE __libc_enable_secure
-# define DETERMINE_SECURE
-#else
-static int enable_secure;
-# define ENABLE_SECURE (enable_secure == 1)
-# define DETERMINE_SECURE \
-  if (enable_secure == 0)						      \
-    {									      \
-      if (getuid () != geteuid () || getgid () != getegid ())		      \
-	enable_secure = 1;						      \
-      else								      \
-	enable_secure = -1;						      \
-    }
+# define DCIGETTEXT dcigettext__
 #endif
 
 /* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
@@ -243,413 +49,10 @@ DCGETTEXT (domainname, msgid, category)
      const char *msgid;
      int category;
 {
-#ifndef HAVE_ALLOCA
-  struct block_list *block_list = NULL;
-#endif
-  struct loaded_l10nfile *domain;
-  struct binding *binding;
-  const char *categoryname;
-  const char *categoryvalue;
-  char *dirname, *xdomainname;
-  char *single_locale;
-  char *retval;
-  int saved_errno = errno;
-
-  /* If no real MSGID is given return NULL.  */
-  if (msgid == NULL)
-    return NULL;
-
-  /* See whether this is a SUID binary or not.  */
-  DETERMINE_SECURE;
-
-  /* If DOMAINNAME is NULL, we are interested in the default domain.  If
-     CATEGORY is not LC_MESSAGES this might not make much sense but the
-     definition left this undefined.  */
-  if (domainname == NULL)
-    domainname = _nl_current_default_domain;
-
-  /* First find matching binding.  */
-  for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
-    {
-      int compare = strcmp (domainname, binding->domainname);
-      if (compare == 0)
-	/* We found it!  */
-	break;
-      if (compare < 0)
-	{
-	  /* It is not in the list.  */
-	  binding = NULL;
-	  break;
-	}
-    }
-
-  if (binding == NULL)
-    dirname = (char *) _nl_default_dirname;
-  else if (binding->dirname[0] == '/')
-    dirname = binding->dirname;
-  else
-    {
-      /* We have a relative path.  Make it absolute now.  */
-      size_t dirname_len = strlen (binding->dirname) + 1;
-      size_t path_max;
-      char *ret;
-
-      path_max = (unsigned int) PATH_MAX;
-      path_max += 2;		/* The getcwd docs say to do this.  */
-
-      dirname = (char *) alloca (path_max + dirname_len);
-      ADD_BLOCK (block_list, dirname);
-
-      __set_errno (0);
-      while ((ret = getcwd (dirname, path_max)) == NULL && errno == ERANGE)
-	{
-	  path_max += PATH_INCR;
-	  dirname = (char *) alloca (path_max + dirname_len);
-	  ADD_BLOCK (block_list, dirname);
-	  __set_errno (0);
-	}
-
-      if (ret == NULL)
-	{
-	  /* We cannot get the current working directory.  Don't signal an
-	     error but simply return the default string.  */
-	  FREE_BLOCKS (block_list);
-	  __set_errno (saved_errno);
-	  return (char *) msgid;
-	}
-
-      stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
-    }
-
-  /* Now determine the symbolic name of CATEGORY and its value.  */
-  categoryname = category_to_name (category);
-  categoryvalue = guess_category_value (category, categoryname);
-
-  xdomainname = (char *) alloca (strlen (categoryname)
-				 + strlen (domainname) + 5);
-  ADD_BLOCK (block_list, xdomainname);
-
-  stpcpy (stpcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
-		  domainname),
-	  ".mo");
-
-  /* Creating working area.  */
-  single_locale = (char *) alloca (strlen (categoryvalue) + 1);
-  ADD_BLOCK (block_list, single_locale);
-
-
-  /* Search for the given string.  This is a loop because we perhaps
-     got an ordered list of languages to consider for the translation.  */
-  while (1)
-    {
-      /* Make CATEGORYVALUE point to the next element of the list.  */
-      while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
-	++categoryvalue;
-      if (categoryvalue[0] == '\0')
-	{
-	  /* The whole contents of CATEGORYVALUE has been searched but
-	     no valid entry has been found.  We solve this situation
-	     by implicitly appending a "C" entry, i.e. no translation
-	     will take place.  */
-	  single_locale[0] = 'C';
-	  single_locale[1] = '\0';
-	}
-      else
-	{
-	  char *cp = single_locale;
-	  while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
-	    *cp++ = *categoryvalue++;
-	  *cp = '\0';
-
-	  /* When this is a SUID binary we must not allow accessing files
-	     outside the dedicated directories.  */
-	  if (ENABLE_SECURE
-	      && (memchr (single_locale, '/',
-			  _nl_find_language (single_locale) - single_locale)
-		  != NULL))
-	    /* Ingore this entry.  */
-	    continue;
-	}
-
-      /* If the current locale value is C (or POSIX) we don't load a
-	 domain.  Return the MSGID.  */
-      if (strcmp (single_locale, "C") == 0
-	  || strcmp (single_locale, "POSIX") == 0)
-	{
-	  FREE_BLOCKS (block_list);
-	  __set_errno (saved_errno);
-	  return (char *) msgid;
-	}
-
-
-      /* Find structure describing the message catalog matching the
-	 DOMAINNAME and CATEGORY.  */
-      domain = _nl_find_domain (dirname, single_locale, xdomainname);
-
-      if (domain != NULL)
-	{
-	  retval = find_msg (domain, msgid);
-
-	  if (retval == NULL)
-	    {
-	      int cnt;
-
-	      for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
-		{
-		  retval = find_msg (domain->successor[cnt], msgid);
-
-		  if (retval != NULL)
-		    break;
-		}
-	    }
-
-	  if (retval != NULL)
-	    {
-	      FREE_BLOCKS (block_list);
-	      __set_errno (saved_errno);
-	      return retval;
-	    }
-	}
-    }
-  /* NOTREACHED */
+  return DCIGETTEXT (domainname, msgid, NULL, 0, 0, category);
 }
 
 #ifdef _LIBC
 /* Alias for function name in GNU C Library.  */
 weak_alias (__dcgettext, dcgettext);
 #endif
-
-
-static char *
-internal_function
-find_msg (domain_file, msgid)
-     struct loaded_l10nfile *domain_file;
-     const char *msgid;
-{
-  size_t act = 0;
-  size_t top, bottom;
-  struct loaded_domain *domain;
-
-  if (domain_file->decided == 0)
-    _nl_load_domain (domain_file);
-
-  if (domain_file->data == NULL)
-    return NULL;
-
-  domain = (struct loaded_domain *) domain_file->data;
-
-  /* Locate the MSGID and its translation.  */
-  if (domain->hash_size > 2 && domain->hash_tab != NULL)
-    {
-      /* Use the hashing table.  */
-      nls_uint32 len = strlen (msgid);
-      nls_uint32 hash_val = hash_string (msgid);
-      nls_uint32 idx = hash_val % domain->hash_size;
-      nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
-      nls_uint32 nstr = W (domain->must_swap, domain->hash_tab[idx]);
-
-      if (nstr == 0)
-	/* Hash table entry is empty.  */
-	return NULL;
-
-      if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
-	  && strcmp (msgid,
-		     domain->data + W (domain->must_swap,
-				       domain->orig_tab[nstr - 1].offset)) == 0)
-	return (char *) domain->data + W (domain->must_swap,
-					  domain->trans_tab[nstr - 1].offset);
-
-      while (1)
-	{
-	  if (idx >= domain->hash_size - incr)
-	    idx -= domain->hash_size - incr;
-	  else
-	    idx += incr;
-
-	  nstr = W (domain->must_swap, domain->hash_tab[idx]);
-	  if (nstr == 0)
-	    /* Hash table entry is empty.  */
-	    return NULL;
-
-	  if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
-	      && strcmp (msgid,
-			 domain->data + W (domain->must_swap,
-					   domain->orig_tab[nstr - 1].offset))
-	         == 0)
-	    return (char *) domain->data
-	      + W (domain->must_swap, domain->trans_tab[nstr - 1].offset);
-	}
-      /* NOTREACHED */
-    }
-
-  /* Now we try the default method:  binary search in the sorted
-     array of messages.  */
-  bottom = 0;
-  top = domain->nstrings;
-  while (bottom < top)
-    {
-      int cmp_val;
-
-      act = (bottom + top) / 2;
-      cmp_val = strcmp (msgid, domain->data
-			       + W (domain->must_swap,
-				    domain->orig_tab[act].offset));
-      if (cmp_val < 0)
-	top = act;
-      else if (cmp_val > 0)
-	bottom = act + 1;
-      else
-	break;
-    }
-
-  /* If an translation is found return this.  */
-  return bottom >= top ? NULL : (char *) domain->data
-                                + W (domain->must_swap,
-				     domain->trans_tab[act].offset);
-}
-
-
-/* Return string representation of locale CATEGORY.  */
-static const char *
-internal_function
-category_to_name (category)
-     int category;
-{
-  const char *retval;
-
-  switch (category)
-  {
-#ifdef LC_COLLATE
-  case LC_COLLATE:
-    retval = "LC_COLLATE";
-    break;
-#endif
-#ifdef LC_CTYPE
-  case LC_CTYPE:
-    retval = "LC_CTYPE";
-    break;
-#endif
-#ifdef LC_MONETARY
-  case LC_MONETARY:
-    retval = "LC_MONETARY";
-    break;
-#endif
-#ifdef LC_NUMERIC
-  case LC_NUMERIC:
-    retval = "LC_NUMERIC";
-    break;
-#endif
-#ifdef LC_TIME
-  case LC_TIME:
-    retval = "LC_TIME";
-    break;
-#endif
-#ifdef LC_MESSAGES
-  case LC_MESSAGES:
-    retval = "LC_MESSAGES";
-    break;
-#endif
-#ifdef LC_RESPONSE
-  case LC_RESPONSE:
-    retval = "LC_RESPONSE";
-    break;
-#endif
-#ifdef LC_ALL
-  case LC_ALL:
-    /* This might not make sense but is perhaps better than any other
-       value.  */
-    retval = "LC_ALL";
-    break;
-#endif
-  default:
-    /* If you have a better idea for a default value let me know.  */
-    retval = "LC_XXX";
-  }
-
-  return retval;
-}
-
-/* Guess value of current locale from value of the environment variables.  */
-static const char *
-internal_function
-guess_category_value (category, categoryname)
-     int category;
-     const char *categoryname;
-{
-  const char *retval;
-
-  /* The highest priority value is the `LANGUAGE' environment
-     variable.  This is a GNU extension.  */
-  retval = getenv ("LANGUAGE");
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* `LANGUAGE' is not set.  So we have to proceed with the POSIX
-     methods of looking to `LC_ALL', `LC_xxx', and `LANG'.  On some
-     systems this can be done by the `setlocale' function itself.  */
-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
-  return setlocale (category, NULL);
-#else
-  /* Setting of LC_ALL overwrites all other.  */
-  retval = getenv ("LC_ALL");
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* Next comes the name of the desired category.  */
-  retval = getenv (categoryname);
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* Last possibility is the LANG environment variable.  */
-  retval = getenv ("LANG");
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* We use C as the default domain.  POSIX says this is implementation
-     defined.  */
-  return "C";
-#endif
-}
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library.  So we
-   avoid the non-standard function stpcpy.  In GNU C Library this
-   function is available, though.  Also allow the symbol HAVE_STPCPY
-   to be defined.  */
-#if !_LIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-#endif
-
-
-#ifdef _LIBC
-/* If we want to free all resources we have to do some work at
-   program's end.  */
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  struct binding *runp;
-
-  for (runp = _nl_domain_bindings; runp != NULL; runp = runp->next)
-    {
-      free (runp->domainname);
-      if (runp->dirname != _nl_default_dirname)
-	/* Yes, this is a pointer comparison.  */
-	free (runp->dirname);
-    }
-
-  if (_nl_current_default_domain != _nl_default_default_domain)
-    /* Yes, again a pointer comparison.  */
-    free ((char *) _nl_current_default_domain);
-}
-
-text_set_element (__libc_subfreeres, free_mem);
-#endif

intl/dcngettext.c

@@ -0,0 +1,60 @@
+/* Implementation of the dcngettext(3) function.
+   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define DCNGETTEXT __dcngettext
+# define DCIGETTEXT __dcigettext
+#else
+# define DCNGETTEXT dcngettext__
+# define DCIGETTEXT dcigettext__
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+   locale.  */
+char *
+DCNGETTEXT (domainname, msgid1, msgid2, n, category)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+     int category;
+{
+  return DCIGETTEXT (domainname, msgid1, msgid2, 1, n, category);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__dcngettext, dcngettext);
+#endif

intl/dgettext.c

@@ -1,32 +1,32 @@
-/* Implementation of the dgettext(3) function
-   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+/* Implementation of the dgettext(3) function.
+   Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-#if defined HAVE_LOCALE_H || defined _LIBC
-# include <locale.h>
-#endif
+#include <locale.h>
 
+#include "gettextP.h"
 #ifdef _LIBC
 # include <libintl.h>
 #else
-# include "libgettext.h"
+# include "libgnuintl.h"
 #endif
 
 /* @@ end of prolog @@ */

intl/dngettext.c

@@ -0,0 +1,61 @@
+/* Implementation of the dngettext(3) function.
+   Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <locale.h>
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define DNGETTEXT __dngettext
+# define DCNGETTEXT __dcngettext
+#else
+# define DNGETTEXT dngettext__
+# define DCNGETTEXT dcngettext__
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog of the current
+   LC_MESSAGES locale and skip message according to the plural form.  */
+char *
+DNGETTEXT (domainname, msgid1, msgid2, n)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+{
+  return DCNGETTEXT (domainname, msgid1, msgid2, n, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__dngettext, dngettext);
+#endif

intl/explodename.c

@@ -1,33 +1,27 @@
-/* Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+/* Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
    Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-#endif
+#include <stdlib.h>
+#include <string.h>
 #include <sys/types.h>
 
 #include "loadinfo.h"

intl/finddomain.c

@@ -1,64 +1,40 @@
 /* Handle list of needed message catalogs
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@gnu.org>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-#include <ctype.h>
-#include <errno.h>
 #include <stdio.h>
 #include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
+#include <stdlib.h>
+#include <string.h>
 
 #if defined HAVE_UNISTD_H || defined _LIBC
 # include <unistd.h>
 #endif
 
-#include "gettext.h"
 #include "gettextP.h"
 #ifdef _LIBC
 # include <libintl.h>
 #else
-# include "libgettext.h"
+# include "libgnuintl.h"
 #endif
 
 /* @@ end of prolog @@ */
@@ -71,10 +47,11 @@ static struct loaded_l10nfile *_nl_loaded_domains;
    established bindings.  */
 struct loaded_l10nfile *
 internal_function
-_nl_find_domain (dirname, locale, domainname)
+_nl_find_domain (dirname, locale, domainname, domainbinding)
      const char *dirname;
      char *locale;
      const char *domainname;
+     struct binding *domainbinding;
 {
   struct loaded_l10nfile *retval;
   const char *language;
@@ -120,7 +97,7 @@ _nl_find_domain (dirname, locale, domainname)
       int cnt;
 
       if (retval->decided == 0)
-	_nl_load_domain (retval);
+	_nl_load_domain (retval, domainbinding);
 
       if (retval->data != NULL)
 	return retval;
@@ -128,7 +105,7 @@ _nl_find_domain (dirname, locale, domainname)
       for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
 	{
 	  if (retval->successor[cnt]->decided == 0)
-	    _nl_load_domain (retval->successor[cnt]);
+	    _nl_load_domain (retval->successor[cnt], domainbinding);
 
 	  if (retval->successor[cnt]->data != NULL)
 	    break;
@@ -175,14 +152,14 @@ _nl_find_domain (dirname, locale, domainname)
     return NULL;
 
   if (retval->decided == 0)
-    _nl_load_domain (retval);
+    _nl_load_domain (retval, domainbinding);
   if (retval->data == NULL)
     {
       int cnt;
       for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
 	{
 	  if (retval->successor[cnt]->decided == 0)
-	    _nl_load_domain (retval->successor[cnt]);
+	    _nl_load_domain (retval->successor[cnt], domainbinding);
 	  if (retval->successor[cnt]->data != NULL)
 	    break;
 	}
@@ -192,6 +169,10 @@ _nl_find_domain (dirname, locale, domainname)
   if (alias_value != NULL)
     free (locale);
 
+  /* The space for normalized_codeset is dynamically allocated.  Free it.  */
+  if (mask & XPG_NORM_CODESET)
+    free ((void *) normalized_codeset);
+
   return retval;
 }
 
@@ -208,6 +189,7 @@ free_mem (void)
       if (runp->data != NULL)
 	_nl_unload_domain ((struct loaded_domain *) runp->data);
       runp = runp->next;
+      free ((char *) here->filename);
       free (here);
     }
 }

intl/gettext.c

@@ -1,19 +1,20 @@
 /* Implementation of gettext(3) function.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+   Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
@@ -23,21 +24,14 @@
 # define __need_NULL
 # include <stddef.h>
 #else
-# ifdef STDC_HEADERS
-#  include <stdlib.h>		/* Just for NULL.  */
-# else
-#  ifdef HAVE_STRING_H
-#   include <string.h>
-#  else
-#   define NULL ((void *) 0)
-#  endif
-# endif
+# include <stdlib.h>		/* Just for NULL.  */
 #endif
 
+#include "gettextP.h"
 #ifdef _LIBC
 # include <libintl.h>
 #else
-# include "libgettext.h"
+# include "libgnuintl.h"
 #endif
 
 /* @@ end of prolog @@ */
@@ -48,10 +42,10 @@
    prefix.  So we have to make a difference here.  */
 #ifdef _LIBC
 # define GETTEXT __gettext
-# define DGETTEXT __dgettext
+# define DCGETTEXT __dcgettext
 #else
 # define GETTEXT gettext__
-# define DGETTEXT dgettext__
+# define DCGETTEXT dcgettext__
 #endif
 
 /* Look up MSGID in the current default message catalog for the current
@@ -61,7 +55,7 @@ char *
 GETTEXT (msgid)
      const char *msgid;
 {
-  return DGETTEXT (NULL, msgid);
+  return DCGETTEXT (NULL, msgid, LC_MESSAGES);
 }
 
 #ifdef _LIBC

intl/gettext.h

@@ -1,26 +1,24 @@
-/* Internal header for GNU gettext internationalization functions.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+/* Description of GNU message catalog format: general file layout.
+   Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
    You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifndef _GETTEXT_H
 #define _GETTEXT_H 1
 
-#include <stdio.h>
-
 #if HAVE_LIMITS_H || _LIBC
 # include <limits.h>
 #endif
@@ -37,9 +35,8 @@
 /* The following contortions are an attempt to use the C preprocessor
    to determine an unsigned integral type that is 32 bits wide.  An
    alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
-   doing that would require that the configure script compile and *run*
-   the resulting executable.  Locally running cross-compiled executables
-   is usually not possible.  */
+   as of version autoconf-2.13, the AC_CHECK_SIZEOF macro doesn't work
+   when cross-compiling.  */
 
 #if __STDC__
 # define UINT_MAX_32_BITS 4294967295U

intl/gettextP.h

@@ -1,26 +1,39 @@
-/* Header describing internals of gettext library
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+/* Header describing internals of libintl library.
+   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@cygnus.com>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifndef _GETTEXTP_H
 #define _GETTEXTP_H
 
+#include <stddef.h>		/* Get size_t.  */
+
+#ifdef _LIBC
+# include "../iconv/gconv_int.h"
+#else
+# if HAVE_ICONV
+#  include <iconv.h>
+# endif
+#endif
+
 #include "loadinfo.h"
 
+#include "gettext.h"		/* Get nls_uint32.  */
+
 /* @@ end of prolog @@ */
 
 #ifndef PARAMS
@@ -35,6 +48,12 @@
 # define internal_function
 #endif
 
+/* Tell the compiler when a conditional or integer expression is
+   almost always true or almost always false.  */
+#ifndef HAVE_BUILTIN_EXPECT
+# define __builtin_expect(expr, val) (expr)
+#endif
+
 #ifndef W
 # define W(flag, data) ((flag) ? SWAP (data) : (data))
 #endif
@@ -44,8 +63,6 @@
 # include <byteswap.h>
 # define SWAP(i) bswap_32 (i)
 #else
-static nls_uint32 SWAP PARAMS ((nls_uint32 i));
-
 static inline nls_uint32
 SWAP (i)
      nls_uint32 i;
@@ -55,6 +72,52 @@ SWAP (i)
 #endif
 
 
+/* This is the representation of the expressions to determine the
+   plural form.  */
+struct expression
+{
+  int nargs;			/* Number of arguments.  */
+  enum operator
+  {
+    /* Without arguments:  */
+    var,			/* The variable "n".  */
+    num,			/* Decimal number.  */
+    /* Unary operators:  */
+    lnot,			/* Logical NOT.  */
+    /* Binary operators:  */
+    mult,			/* Multiplication.  */
+    divide,			/* Division.  */
+    module,			/* Module operation.  */
+    plus,			/* Addition.  */
+    minus,			/* Subtraction.  */
+    less_than,			/* Comparison.  */
+    greater_than,		/* Comparison.  */
+    less_or_equal,		/* Comparison.  */
+    greater_or_equal,		/* Comparison.  */
+    equal,			/* Comparision for equality.  */
+    not_equal,			/* Comparision for inequality.  */
+    land,			/* Logical AND.  */
+    lor,			/* Logical OR.  */
+    /* Ternary operators:  */
+    qmop			/* Question mark operator.  */
+  } operation;
+  union
+  {
+    unsigned long int num;	/* Number value for `num'.  */
+    struct expression *args[3];	/* Up to three arguments.  */
+  } val;
+};
+
+/* This is the data structure to pass information to the parser and get
+   the result in a thread-safe way.  */
+struct parse_args
+{
+  const char *cp;
+  struct expression *res;
+};
+
+
+/* The representation of an opened message catalog.  */
 struct loaded_domain
 {
   const char *data;
@@ -66,23 +129,123 @@ struct loaded_domain
   struct string_desc *trans_tab;
   nls_uint32 hash_size;
   nls_uint32 *hash_tab;
+  int codeset_cntr;
+#ifdef _LIBC
+  __gconv_t conv;
+#else
+# if HAVE_ICONV
+  iconv_t conv;
+# endif
+#endif
+  char **conv_tab;
+
+  struct expression *plural;
+  unsigned long int nplurals;
 };
 
+/* We want to allocate a string at the end of the struct.  But ISO C
+   doesn't allow zero sized arrays.  */
+#ifdef __GNUC__
+# define ZERO 0
+#else
+# define ZERO 1
+#endif
+
+/* A set of settings bound to a message domain.  Used to store settings
+   from bindtextdomain() and bind_textdomain_codeset().  */
 struct binding
 {
   struct binding *next;
-  char *domainname;
   char *dirname;
+  int codeset_cntr;	/* Incremented each time codeset changes.  */
+  char *codeset;
+  char domainname[ZERO];
 };
 
+/* A counter which is incremented each time some previous translations
+   become invalid.
+   This variable is part of the external ABI of the GNU libintl.  */
+extern int _nl_msg_cat_cntr;
+
 struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname,
 						 char *__locale,
-						 const char *__domainname))
+						 const char *__domainname,
+					      struct binding *__domainbinding))
      internal_function;
-void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain))
+void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain,
+			      struct binding *__domainbinding))
      internal_function;
 void _nl_unload_domain PARAMS ((struct loaded_domain *__domain))
      internal_function;
+const char *_nl_init_domain_conv PARAMS ((struct loaded_l10nfile *__domain_file,
+					  struct loaded_domain *__domain,
+					  struct binding *__domainbinding))
+     internal_function;
+void _nl_free_domain_conv PARAMS ((struct loaded_domain *__domain))
+     internal_function;
+
+char *_nl_find_msg PARAMS ((struct loaded_l10nfile *domain_file,
+			    struct binding *domainbinding,
+			    const char *msgid, size_t *lengthp))
+     internal_function;
+
+#ifdef _LIBC
+extern char *__gettext PARAMS ((const char *__msgid));
+extern char *__dgettext PARAMS ((const char *__domainname,
+				 const char *__msgid));
+extern char *__dcgettext PARAMS ((const char *__domainname,
+				  const char *__msgid, int __category));
+extern char *__ngettext PARAMS ((const char *__msgid1, const char *__msgid2,
+				 unsigned long int __n));
+extern char *__dngettext PARAMS ((const char *__domainname,
+				  const char *__msgid1, const char *__msgid2,
+				  unsigned long int n));
+extern char *__dcngettext PARAMS ((const char *__domainname,
+				   const char *__msgid1, const char *__msgid2,
+				   unsigned long int __n, int __category));
+extern char *__dcigettext PARAMS ((const char *__domainname,
+				   const char *__msgid1, const char *__msgid2,
+				   int __plural, unsigned long int __n,
+				   int __category));
+extern char *__textdomain PARAMS ((const char *__domainname));
+extern char *__bindtextdomain PARAMS ((const char *__domainname,
+				       const char *__dirname));
+extern char *__bind_textdomain_codeset PARAMS ((const char *__domainname,
+						const char *__codeset));
+#else
+extern char *gettext__ PARAMS ((const char *__msgid));
+extern char *dgettext__ PARAMS ((const char *__domainname,
+				 const char *__msgid));
+extern char *dcgettext__ PARAMS ((const char *__domainname,
+				  const char *__msgid, int __category));
+extern char *ngettext__ PARAMS ((const char *__msgid1, const char *__msgid2,
+				 unsigned long int __n));
+extern char *dngettext__ PARAMS ((const char *__domainname,
+				  const char *__msgid1, const char *__msgid2,
+				  unsigned long int __n));
+extern char *dcngettext__ PARAMS ((const char *__domainname,
+				   const char *__msgid1, const char *__msgid2,
+				   unsigned long int __n, int __category));
+extern char *dcigettext__ PARAMS ((const char *__domainname,
+				   const char *__msgid1, const char *__msgid2,
+				   int __plural, unsigned long int __n,
+				   int __category));
+extern char *textdomain__ PARAMS ((const char *__domainname));
+extern char *bindtextdomain__ PARAMS ((const char *__domainname,
+				       const char *__dirname));
+extern char *bind_textdomain_codeset__ PARAMS ((const char *__domainname,
+						const char *__codeset));
+#endif
+
+#ifdef _LIBC
+extern void __gettext_free_exp PARAMS ((struct expression *exp))
+     internal_function;
+extern int __gettextparse PARAMS ((void *arg));
+#else
+extern void gettext_free_exp__ PARAMS ((struct expression *exp))
+     internal_function;
+extern int gettextparse__ PARAMS ((void *arg));
+#endif
 
 /* @@ begin of epilog @@ */
 

intl/hash-string.h

@@ -1,20 +1,20 @@
-/* Implements a string hashing function.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+/* Description of GNU message catalog format: string hashing function.
+   Copyright (C) 1995, 1997, 1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
    You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* @@ end of prolog @@ */
 

intl/intl-compat.c

@@ -1,43 +1,99 @@
 /* intl-compat.c - Stub functions to call gettext functions from GNU gettext
    Library.
-   Copyright (C) 1995 Software Foundation, Inc.
+   Copyright (C) 1995, 2000, 2001 Software Foundation, Inc.
 
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-#include "libgettext.h"
+#include "libgnuintl.h"
+#include "gettextP.h"
 
 /* @@ end of prolog @@ */
 
+/* This file redirects the gettext functions (without prefix or suffix) to
+   those defined in the included GNU gettext library (with "__" suffix).
+   It is compiled into libintl when the included GNU gettext library is
+   configured --with-included-gettext.
+
+   This redirection works also in the case that the system C library or
+   the system libintl library contain gettext/textdomain/... functions.
+   If it didn't, we would need to add preprocessor level redirections to
+   libgnuintl.h of the following form:
+
+#    define gettext gettext__
+#    define dgettext dgettext__
+#    define dcgettext dcgettext__
+#    define ngettext ngettext__
+#    define dngettext dngettext__
+#    define dcngettext dcngettext__
+#    define textdomain textdomain__
+#    define bindtextdomain bindtextdomain__
+#    define bind_textdomain_codeset bind_textdomain_codeset__
+
+   How does this redirection work? There are two cases.
+   A. When libintl.a is linked into an executable, it works because
+      functions defined in the executable always override functions in
+      the shared libraries.
+   B. When libintl.so is used, it works because
+      1. those systems defining gettext/textdomain/... in the C library
+         (namely, Solaris 2.4 and newer, and GNU libc 2.0 and newer) are
+         ELF systems and define these symbols as weak, thus explicitly
+         letting other shared libraries override it.
+      2. those systems defining gettext/textdomain/... in a standalone
+         libintl.so library (namely, Solaris 2.3 and newer) have this
+         shared library in /usr/lib, and the linker will search /usr/lib
+         *after* the directory where the GNU gettext library is installed.
+
+   A third case, namely when libintl.a is linked into a shared library
+   whose name is not libintl.so, is not supported. In this case, on
+   Solaris, when -lintl precedes the linker option for the shared library
+   containing GNU gettext, the system's gettext would indeed override
+   the GNU gettext. Anyone doing this kind of stuff must be clever enough
+   to 1. compile libintl.a with -fPIC, 2. remove -lintl from his linker
+   command line.  */
+
 
 #undef gettext
 #undef dgettext
 #undef dcgettext
+#undef ngettext
+#undef dngettext
+#undef dcngettext
 #undef textdomain
 #undef bindtextdomain
+#undef bind_textdomain_codeset
 
 
 char *
-bindtextdomain (domainname, dirname)
-     const char *domainname;
-     const char *dirname;
+gettext (msgid)
+     const char *msgid;
 {
-  return bindtextdomain__ (domainname, dirname);
+  return gettext__ (msgid);
+}
+
+
+char *
+dgettext (domainname, msgid)
+     const char *domainname;
+     const char *msgid;
+{
+  return dgettext__ (domainname, msgid);
 }
 
 
@@ -52,19 +108,35 @@ dcgettext (domainname, msgid, category)
 
 
 char *
-dgettext (domainname, msgid)
-     const char *domainname;
-     const char *msgid;
+ngettext (msgid1, msgid2, n)
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
 {
-  return dgettext__ (domainname, msgid);
+  return ngettext__ (msgid1, msgid2, n);
 }
 
 
 char *
-gettext (msgid)
-     const char *msgid;
+dngettext (domainname, msgid1, msgid2, n)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
 {
-  return gettext__ (msgid);
+  return dngettext__ (domainname, msgid1, msgid2, n);
+}
+
+
+char *
+dcngettext (domainname, msgid1, msgid2, n, category)
+     const char *domainname;
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+     int category;
+{
+  return dcngettext__ (domainname, msgid1, msgid2, n, category);
 }
 
 
@@ -74,3 +146,21 @@ textdomain (domainname)
 {
   return textdomain__ (domainname);
 }
+
+
+char *
+bindtextdomain (domainname, dirname)
+     const char *domainname;
+     const char *dirname;
+{
+  return bindtextdomain__ (domainname, dirname);
+}
+
+
+char *
+bind_textdomain_codeset (domainname, codeset)
+     const char *domainname;
+     const char *codeset;
+{
+  return bind_textdomain_codeset__ (domainname, codeset);
+}

intl/l10nflist.c

@@ -1,37 +1,33 @@
-/* Handle list of needed message catalogs
-   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+/* Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
    Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+/* Tell glibc's <string.h> to provide a prototype for stpcpy().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-#  define _GNU_SOURCE	1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
+#include <string.h>
 #if !HAVE_STRCHR && !defined _LIBC
 # ifndef strchr
 #  define strchr index
@@ -43,10 +39,7 @@
 #endif
 #include <ctype.h>
 #include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
+#include <stdlib.h>
 
 #include "loadinfo.h"
 
@@ -224,7 +217,7 @@ _nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language,
 
   /* Construct file name.  */
   memcpy (abs_filename, dirlist, dirlist_len);
-  __argz_stringify (abs_filename, dirlist_len, ':');
+  __argz_stringify (abs_filename, dirlist_len, PATH_SEPARATOR);
   cp = abs_filename + (dirlist_len - 1);
   *cp++ = '/';
   cp = stpcpy (cp, language);
@@ -349,7 +342,8 @@ _nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language,
 
 /* Normalize codeset name.  There is no standard for the codeset
    names.  Normalization allows the user to use any of the common
-   names.  */
+   names.  The return value is dynamically allocated and has to be
+   freed by the caller.  */
 const char *
 _nl_normalize_codeset (codeset, name_len)
      const char *codeset;

intl/libgettext.h

@@ -1,182 +1,49 @@
-/* Message catalogs for internationalization.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+/* Convenience header for conditional use of GNU <libintl.h>.
+   Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
-/* Because on some systems (e.g. Solaris) we sometimes have to include
-   the systems libintl.h as well as this file we have more complex
-   include protection above.  But the systems header might perhaps also
-   define _LIBINTL_H and therefore we have to protect the definition here.  */
-
-#if !defined _LIBINTL_H || !defined _LIBGETTEXT_H
-#ifndef _LIBINTL_H
-# define _LIBINTL_H	1
-#endif
-#define _LIBGETTEXT_H	1
-
-/* We define an additional symbol to signal that we use the GNU
-   implementation of gettext.  */
-#define __USE_GNU_GETTEXT 1
-
-#include <sys/types.h>
-
-#if HAVE_LOCALE_H
-# include <locale.h>
-#endif
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__ || defined __cplusplus
-#  define PARAMS(args) args
-# else
-#  define PARAMS(args) ()
-# endif
-#endif
-
-#ifndef NULL
-# if !defined __cplusplus || defined __GNUC__
-#  define NULL ((void *) 0)
-# else
-#  define NULL (0)
-# endif
-#endif
-
-#if !HAVE_LC_MESSAGES
-/* This value determines the behaviour of the gettext() and dgettext()
-   function.  But some system does not have this defined.  Define it
-   to a default value.  */
-# define LC_MESSAGES (-1)
-#endif
-
-
-/* Declarations for gettext-using-catgets interface.  Derived from
-   Jim Meyering's libintl.h.  */
-struct _msg_ent
-{
-  const char *_msg;
-  int _msg_number;
-};
-
-
-#if HAVE_CATGETS
-/* These two variables are defined in the automatically by po-to-tbl.sed
-   generated file `cat-id-tbl.c'.  */
-extern const struct _msg_ent _msg_tbl[];
-extern int _msg_tbl_length;
-#endif
-
-
-/* For automatical extraction of messages sometimes no real
-   translation is needed.  Instead the string itself is the result.  */
-#define gettext_noop(Str) (Str)
-
-/* Look up MSGID in the current default message catalog for the current
-   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
-   text).  */
-extern char *gettext PARAMS ((const char *__msgid));
-extern char *gettext__ PARAMS ((const char *__msgid));
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current
-   LC_MESSAGES locale.  */
-extern char *dgettext PARAMS ((const char *__domainname, const char *__msgid));
-extern char *dgettext__ PARAMS ((const char *__domainname,
-				 const char *__msgid));
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-   locale.  */
-extern char *dcgettext PARAMS ((const char *__domainname, const char *__msgid,
-				int __category));
-extern char *dcgettext__ PARAMS ((const char *__domainname,
-				  const char *__msgid, int __category));
-
-
-/* Set the current default message catalog to DOMAINNAME.
-   If DOMAINNAME is null, return the current default.
-   If DOMAINNAME is "", reset to the default of "messages".  */
-extern char *textdomain PARAMS ((const char *__domainname));
-extern char *textdomain__ PARAMS ((const char *__domainname));
-
-/* Specify that the DOMAINNAME message catalog will be found
-   in DIRNAME rather than in the system locale data base.  */
-extern char *bindtextdomain PARAMS ((const char *__domainname,
-				  const char *__dirname));
-extern char *bindtextdomain__ PARAMS ((const char *__domainname,
-				    const char *__dirname));
+#ifndef _LIBGETTEXT_H
+#define _LIBGETTEXT_H 1
 
+/* NLS can be disabled through the configure --disable-nls option.  */
 #if ENABLE_NLS
 
-/* Solaris 2.3 has the gettext function but dcgettext is missing.
-   So we omit this optimization for Solaris 2.3.  BTW, Solaris 2.4
-   has dcgettext.  */
-# if !HAVE_CATGETS && (!HAVE_GETTEXT || HAVE_DCGETTEXT)
-
-#  define gettext(Msgid)						      \
-     dgettext (NULL, Msgid)
-
-#  define dgettext(Domainname, Msgid)					      \
-     dcgettext (Domainname, Msgid, LC_MESSAGES)
-
-#  if defined __GNUC__ && __GNUC__ == 2 && __GNUC_MINOR__ >= 7
-/* This global variable is defined in loadmsgcat.c.  We need a sign,
-   whether a new catalog was loaded, which can be associated with all
-   translations.  */
-extern int _nl_msg_cat_cntr;
-
-#   define dcgettext(Domainname, Msgid, Category)			      \
-  (__extension__							      \
-   ({									      \
-     char *__result;							      \
-     if (__builtin_constant_p (Msgid))					      \
-       {								      \
-	 static char *__translation__;					      \
-	 static int __catalog_counter__;				      \
-	 if (! __translation__ || __catalog_counter__ != _nl_msg_cat_cntr)    \
-	   {								      \
-	     __translation__ =						      \
-	       dcgettext__ (Domainname, Msgid, Category);		      \
-	     __catalog_counter__ = _nl_msg_cat_cntr;			      \
-	   }								      \
-	 __result = __translation__;					      \
-       }								      \
-     else								      \
-       __result = dcgettext__ (Domainname, Msgid, Category);		      \
-     __result;								      \
-    }))
-#  endif
-# endif
+/* Get declarations of GNU message catalog functions.  */
+# include <libintl.h>
 
 #else
 
 # define gettext(Msgid) (Msgid)
 # define dgettext(Domainname, Msgid) (Msgid)
 # define dcgettext(Domainname, Msgid, Category) (Msgid)
-# define textdomain(Domainname) ((char *) Domainname)
-# define bindtextdomain(Domainname, Dirname) ((char *) Dirname)
+# define ngettext(Msgid1, Msgid2, N) \
+    ((N) == 1 ? (char *) (Msgid1) : (char *) (Msgid2))
+# define dngettext(Domainname, Msgid1, Msgid2, N) \
+    ((N) == 1 ? (char *) (Msgid1) : (char *) (Msgid2))
+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
+    ((N) == 1 ? (char *) (Msgid1) : (char *) (Msgid2))
+# define textdomain(Domainname) ((char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((char *) (Dirname))
+# define bind_textdomain_codeset(Domainname, Codeset) ((char *) (Codeset))
 
 #endif
 
-/* @@ begin of epilog @@ */
+/* For automatical extraction of messages sometimes no real
+   translation is needed.  Instead the string itself is the result.  */
+#define gettext_noop(Str) (Str)
 
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+#endif /* _LIBGETTEXT_H */

intl/libgnuintl.h

@@ -0,0 +1,128 @@
+/* Message catalogs for internationalization.
+   Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+#ifndef _LIBINTL_H
+#define _LIBINTL_H	1
+
+#include <locale.h>
+
+/* The LC_MESSAGES locale category is the category used by the functions
+   gettext() and dgettext().  It is specified in POSIX, but not in ANSI C.
+   On systems that don't define it, use an arbitrary value instead.
+   On Solaris, <locale.h> defines __LOCALE_H then includes <libintl.h> (i.e.
+   this file!) and then only defines LC_MESSAGES.  To avoid a redefinition
+   warning, don't define LC_MESSAGES in this case.  */
+#if !defined LC_MESSAGES && !defined __LOCALE_H
+# define LC_MESSAGES 1729
+#endif
+
+/* We define an additional symbol to signal that we use the GNU
+   implementation of gettext.  */
+#define __USE_GNU_GETTEXT 1
+
+/* Resolve a platform specific conflict on DJGPP.  GNU gettext takes
+   precedence over _conio_gettext.  */
+#ifdef __DJGPP__
+# undef gettext
+# define gettext gettext
+#endif
+
+#ifndef PARAMS
+# if __STDC__ || defined __cplusplus
+#  define PARAMS(args) args
+# else
+#  define PARAMS(args) ()
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Look up MSGID in the current default message catalog for the current
+   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
+   text).  */
+extern char *gettext PARAMS ((const char *__msgid));
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current
+   LC_MESSAGES locale.  */
+extern char *dgettext PARAMS ((const char *__domainname, const char *__msgid));
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+   locale.  */
+extern char *dcgettext PARAMS ((const char *__domainname, const char *__msgid,
+				int __category));
+
+
+/* Similar to `gettext' but select the plural form corresponding to the
+   number N.  */
+extern char *ngettext PARAMS ((const char *__msgid1, const char *__msgid2,
+			       unsigned long int __n));
+
+/* Similar to `dgettext' but select the plural form corresponding to the
+   number N.  */
+extern char *dngettext PARAMS ((const char *__domainname, const char *__msgid1,
+				const char *__msgid2, unsigned long int __n));
+
+/* Similar to `dcgettext' but select the plural form corresponding to the
+   number N.  */
+extern char *dcngettext PARAMS ((const char *__domainname, const char *__msgid1,
+				 const char *__msgid2, unsigned long int __n,
+				 int __category));
+
+
+/* Set the current default message catalog to DOMAINNAME.
+   If DOMAINNAME is null, return the current default.
+   If DOMAINNAME is "", reset to the default of "messages".  */
+extern char *textdomain PARAMS ((const char *__domainname));
+
+/* Specify that the DOMAINNAME message catalog will be found
+   in DIRNAME rather than in the system locale data base.  */
+extern char *bindtextdomain PARAMS ((const char *__domainname,
+				     const char *__dirname));
+
+/* Specify the character encoding in which the messages from the
+   DOMAINNAME message catalog will be returned.  */
+extern char *bind_textdomain_codeset PARAMS ((const char *__domainname,
+					      const char *__codeset));
+
+
+/* Optimized version of the functions above.  */
+#if defined __OPTIMIZED
+/* These are macros, but could also be inline functions.  */
+
+# define gettext(msgid)							      \
+  dgettext (NULL, msgid)
+
+# define dgettext(domainname, msgid)					      \
+  dcgettext (domainname, msgid, LC_MESSAGES)
+
+# define ngettext(msgid1, msgid2, n)					      \
+  dngettext (NULL, msgid1, msgid2, n)
+
+# define dngettext(domainname, msgid1, msgid2, n)			      \
+  dcngettext (domainname, msgid1, msgid2, n, LC_MESSAGES)
+
+#endif /* Optimizing. */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* libintl.h */

intl/linux-msg.sed

@@ -1,100 +0,0 @@
-# po2msg.sed - Convert Uniforum style .po file to Linux style .msg file
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#
-# The first directive in the .msg should be the definition of the
-# message set number.  We use always set number 1.
-#
-1 {
-  i\
-$set 1 # Automatically created by po2msg.sed
-  h
-  s/.*/0/
-  x
-}
-#
-# Mitch's old catalog format does not allow comments.
-#
-# We copy the original message as a comment into the .msg file.
-#
-/^msgid/ {
-  s/msgid[ 	]*"//
-#
-# This does not work now with the new format.
-# /"$/! {
-#   s/\\$//
-#   s/$/ ... (more lines following)"/
-# }
-  x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-  td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
-  :d
-  s/9\(_*\)$/_\1/
-  td
-# Assure at least one digit is available.
-  s/^\(_*\)$/0\1/
-# Increment the last digit.
-  s/8\(_*\)$/9\1/
-  s/7\(_*\)$/8\1/
-  s/6\(_*\)$/7\1/
-  s/5\(_*\)$/6\1/
-  s/4\(_*\)$/5\1/
-  s/3\(_*\)$/4\1/
-  s/2\(_*\)$/3\1/
-  s/1\(_*\)$/2\1/
-  s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
-  s/_/0/g
-  x
-  G
-  s/\(.*\)"\n\([0-9]*\)/$ #\2 Original Message:(\1)/p
-}
-#
-# The .msg file contains, other then the .po file, only the translations
-# but each given a unique ID.  Starting from 1 and incrementing by 1 for
-# each message we assign them to the messages.
-# It is important that the .po file used to generate the cat-id-tbl.c file
-# (with po-to-tbl) is the same as the one used here.  (At least the order
-# of declarations must not be changed.)
-#
-/^msgstr/ {
-  s/msgstr[ 	]*"\(.*\)"/# \1/
-# Clear substitution flag.
-  tb
-# Append the next line.
-  :b
-  N
-# Look whether second part is continuation line.
-  s/\(.*\n\)"\(.*\)"/\1\2/
-# Yes, then branch.
-  ta
-  P
-  D
-# Note that D includes a jump to the start!!
-# We found a continuation line.  But before printing insert '\'.
-  :a
-  s/\(.*\)\(\n.*\)/\1\\\2/
-  P
-# We cannot use D here.
-  s/.*\n\(.*\)/\1/
-  tb
-}
-d

intl/loadinfo.h

@@ -1,20 +1,24 @@
-/* Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+/* Copyright (C) 1996-1999, 2000, 2001 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
    Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+#ifndef _LOADINFO_H
+#define _LOADINFO_H	1
 
 #ifndef PARAMS
 # if __STDC__
@@ -24,6 +28,25 @@
 # endif
 #endif
 
+#ifndef internal_function
+# define internal_function
+#endif
+
+/* Tell the compiler when a conditional or integer expression is
+   almost always true or almost always false.  */
+#ifndef HAVE_BUILTIN_EXPECT
+# define __builtin_expect(expr, val) (expr)
+#endif
+
+/* Separator in PATH like lists of pathnames.  */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+  /* Win32, OS/2, DOS */
+# define PATH_SEPARATOR ';'
+#else
+  /* Unix */
+# define PATH_SEPARATOR ':'
+#endif
+
 /* Encoding of locale name parts.  */
 #define CEN_REVISION		1
 #define CEN_SPONSOR		2
@@ -50,6 +73,10 @@ struct loaded_l10nfile
 };
 
 
+/* Normalize codeset name.  There is no standard for the codeset
+   names.  Normalization allows the user to use any of the common
+   names.  The return value is dynamically allocated and has to be
+   freed by the caller.  */
 extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
 						  size_t name_len));
 
@@ -66,6 +93,8 @@ _nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
 
 extern const char *_nl_expand_alias PARAMS ((const char *name));
 
+/* normalized_codeset is dynamically allocated and has to be freed by
+   the caller.  */
 extern int _nl_explode_name PARAMS ((char *name, const char **language,
 				     const char **modifier,
 				     const char **territory,
@@ -76,3 +105,5 @@ extern int _nl_explode_name PARAMS ((char *name, const char **language,
 				     const char **revision));
 
 extern char *_nl_find_language PARAMS ((const char *name));
+
+#endif	/* loadinfo.h */

intl/loadmsgcat.c

@@ -1,36 +1,67 @@
 /* Load needed message catalogs.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE    1
+#endif
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
+#include <ctype.h>
+#include <errno.h>
 #include <fcntl.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+# define HAVE_ALLOCA 1
+#else
+# if defined HAVE_ALLOCA_H || defined _LIBC
+#  include <alloca.h>
+# else
+#  ifdef _AIX
+ #pragma alloca
+#  else
+#   ifndef alloca
+char *alloca ();
+#   endif
+#  endif
+# endif
 #endif
 
+#include <stdlib.h>
+#include <string.h>
+
 #if defined HAVE_UNISTD_H || defined _LIBC
 # include <unistd.h>
 #endif
 
+#ifdef _LIBC
+# include <langinfo.h>
+# include <locale.h>
+#endif
+
 #if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
     || (defined _LIBC && defined _POSIX_MAPPED_FILES)
 # include <sys/mman.h>
@@ -43,6 +74,10 @@
 #include "gettext.h"
 #include "gettextP.h"
 
+#ifdef _LIBC
+# include "../locale/localeinfo.h"
+#endif
+
 /* @@ end of prolog @@ */
 
 #ifdef _LIBC
@@ -56,29 +91,275 @@
 # define munmap __munmap
 #endif
 
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define PLURAL_PARSE __gettextparse
+#else
+# define PLURAL_PARSE gettextparse__
+#endif
+
+/* For those losing systems which don't have `alloca' we have to add
+   some additional code emulating it.  */
+#ifdef HAVE_ALLOCA
+# define freea(p) /* nothing */
+#else
+# define alloca(n) malloc (n)
+# define freea(p) free (p)
+#endif
+
+/* For systems that distinguish between text and binary I/O.
+   O_BINARY is usually declared in <fcntl.h>. */
+#if !defined O_BINARY && defined _O_BINARY
+  /* For MSC-compatible compilers.  */
+# define O_BINARY _O_BINARY
+# define O_TEXT _O_TEXT
+#endif
+#ifdef __BEOS__
+  /* BeOS 5 has O_BINARY and O_TEXT, but they have no effect.  */
+# undef O_BINARY
+# undef O_TEXT
+#endif
+/* On reasonable systems, binary I/O is the default.  */
+#ifndef O_BINARY
+# define O_BINARY 0
+#endif
+
 /* We need a sign, whether a new catalog was loaded, which can be associated
    with all translations.  This is important if the translations are
    cached by one of GCC's features.  */
-int _nl_msg_cat_cntr = 0;
+int _nl_msg_cat_cntr;
 
+#if (defined __GNUC__ && !defined __APPLE_CC__) \
+    || (defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L)
+
+/* These structs are the constant expression for the germanic plural
+   form determination.  It represents the expression  "n != 1".  */
+static const struct expression plvar =
+{
+  .nargs = 0,
+  .operation = var,
+};
+static const struct expression plone =
+{
+  .nargs = 0,
+  .operation = num,
+  .val =
+  {
+    .num = 1
+  }
+};
+static struct expression germanic_plural =
+{
+  .nargs = 2,
+  .operation = not_equal,
+  .val =
+  {
+    .args =
+    {
+      [0] = (struct expression *) &plvar,
+      [1] = (struct expression *) &plone
+    }
+  }
+};
+
+# define INIT_GERMANIC_PLURAL()
+
+#else
+
+/* For compilers without support for ISO C 99 struct/union initializers:
+   Initialization at run-time.  */
+
+static struct expression plvar;
+static struct expression plone;
+static struct expression germanic_plural;
+
+static void
+init_germanic_plural ()
+{
+  if (plone.val.num == 0)
+    {
+      plvar.nargs = 0;
+      plvar.operation = var;
+
+      plone.nargs = 0;
+      plone.operation = num;
+      plone.val.num = 1;
+
+      germanic_plural.nargs = 2;
+      germanic_plural.operation = not_equal;
+      germanic_plural.val.args[0] = &plvar;
+      germanic_plural.val.args[1] = &plone;
+    }
+}
+
+# define INIT_GERMANIC_PLURAL() init_germanic_plural ()
+
+#endif
+
+
+/* Initialize the codeset dependent parts of an opened message catalog.
+   Return the header entry.  */
+const char *
+internal_function
+_nl_init_domain_conv (domain_file, domain, domainbinding)
+     struct loaded_l10nfile *domain_file;
+     struct loaded_domain *domain;
+     struct binding *domainbinding;
+{
+  /* Find out about the character set the file is encoded with.
+     This can be found (in textual form) in the entry "".  If this
+     entry does not exist or if this does not contain the `charset='
+     information, we will assume the charset matches the one the
+     current locale and we don't have to perform any conversion.  */
+  char *nullentry;
+  size_t nullentrylen;
+
+  /* Preinitialize fields, to avoid recursion during _nl_find_msg.  */
+  domain->codeset_cntr =
+    (domainbinding != NULL ? domainbinding->codeset_cntr : 0);
+#ifdef _LIBC
+  domain->conv = (__gconv_t) -1;
+#else
+# if HAVE_ICONV
+  domain->conv = (iconv_t) -1;
+# endif
+#endif
+  domain->conv_tab = NULL;
+
+  /* Get the header entry.  */
+  nullentry = _nl_find_msg (domain_file, domainbinding, "", &nullentrylen);
+
+  if (nullentry != NULL)
+    {
+#if defined _LIBC || HAVE_ICONV
+      const char *charsetstr;
+
+      charsetstr = strstr (nullentry, "charset=");
+      if (charsetstr != NULL)
+	{
+	  size_t len;
+	  char *charset;
+	  const char *outcharset;
+
+	  charsetstr += strlen ("charset=");
+	  len = strcspn (charsetstr, " \t\n");
+
+	  charset = (char *) alloca (len + 1);
+# if defined _LIBC || HAVE_MEMPCPY
+	  *((char *) mempcpy (charset, charsetstr, len)) = '\0';
+# else
+	  memcpy (charset, charsetstr, len);
+	  charset[len] = '\0';
+# endif
+
+	  /* The output charset should normally be determined by the
+	     locale.  But sometimes the locale is not used or not correctly
+	     set up, so we provide a possibility for the user to override
+	     this.  Moreover, the value specified through
+	     bind_textdomain_codeset overrides both.  */
+	  if (domainbinding != NULL && domainbinding->codeset != NULL)
+	    outcharset = domainbinding->codeset;
+	  else
+	    {
+	      outcharset = getenv ("OUTPUT_CHARSET");
+	      if (outcharset == NULL || outcharset[0] == '\0')
+		{
+# ifdef _LIBC
+		  outcharset = (*_nl_current[LC_CTYPE])->values[_NL_ITEM_INDEX (CODESET)].string;
+# else
+#  if HAVE_ICONV
+		  extern const char *locale_charset (void);
+		  outcharset = locale_charset ();
+#  endif
+# endif
+		}
+	    }
+
+# ifdef _LIBC
+	  /* We always want to use transliteration.  */
+	  outcharset = norm_add_slashes (outcharset, "TRANSLIT");
+	  charset = norm_add_slashes (charset, NULL);
+	  if (__gconv_open (outcharset, charset, &domain->conv,
+			    GCONV_AVOID_NOCONV)
+	      != __GCONV_OK)
+	    domain->conv = (__gconv_t) -1;
+# else
+#  if HAVE_ICONV
+	  /* When using GNU libiconv, we want to use transliteration.  */
+#   if _LIBICONV_VERSION >= 0x0105
+	  len = strlen (outcharset);
+	  {
+	    char *tmp = (char *) alloca (len + 10 + 1);
+	    memcpy (tmp, outcharset, len);
+	    memcpy (tmp + len, "//TRANSLIT", 10 + 1);
+	    outcharset = tmp;
+	  }
+#   endif
+	  domain->conv = iconv_open (outcharset, charset);
+#   if _LIBICONV_VERSION >= 0x0105
+	  freea (outcharset);
+#   endif
+#  endif
+# endif
+
+	  freea (charset);
+	}
+#endif /* _LIBC || HAVE_ICONV */
+    }
+
+  return nullentry;
+}
+
+/* Frees the codeset dependent parts of an opened message catalog.  */
+void
+internal_function
+_nl_free_domain_conv (domain)
+     struct loaded_domain *domain;
+{
+  if (domain->conv_tab != NULL && domain->conv_tab != (char **) -1)
+    free (domain->conv_tab);
+
+#ifdef _LIBC
+  if (domain->conv != (__gconv_t) -1)
+    __gconv_close (domain->conv);
+#else
+# if HAVE_ICONV
+  if (domain->conv != (iconv_t) -1)
+    iconv_close (domain->conv);
+# endif
+#endif
+}
 
 /* Load the message catalogs specified by FILENAME.  If it is no valid
    message catalog do nothing.  */
 void
 internal_function
-_nl_load_domain (domain_file)
+_nl_load_domain (domain_file, domainbinding)
      struct loaded_l10nfile *domain_file;
+     struct binding *domainbinding;
 {
   int fd;
   size_t size;
+#ifdef _LIBC
+  struct stat64 st;
+#else
   struct stat st;
+#endif
   struct mo_file_header *data = (struct mo_file_header *) -1;
   int use_mmap = 0;
   struct loaded_domain *domain;
+  const char *nullentry;
 
   domain_file->decided = 1;
   domain_file->data = NULL;
 
+  /* Note that it would be useless to store domainbinding in domain_file
+     because domainbinding might be == NULL now but != NULL later (after
+     a call to bind_textdomain_codeset).  */
+
   /* If the record does not represent a valid locale the FILENAME
      might be NULL.  This can happen when according to the given
      specification the locale file name is different for XPG and CEN
@@ -87,14 +368,19 @@ _nl_load_domain (domain_file)
     return;
 
   /* Try to open the addressed file.  */
-  fd = open (domain_file->filename, O_RDONLY);
+  fd = open (domain_file->filename, O_RDONLY | O_BINARY);
   if (fd == -1)
     return;
 
   /* We must know about the size of the file.  */
-  if (fstat (fd, &st) != 0
-      || (size = (size_t) st.st_size) != st.st_size
-      || size < sizeof (struct mo_file_header))
+  if (
+#ifdef _LIBC
+      __builtin_expect (fstat64 (fd, &st) != 0, 0)
+#else
+      __builtin_expect (fstat (fd, &st) != 0, 0)
+#endif
+      || __builtin_expect ((size = (size_t) st.st_size) != st.st_size, 0)
+      || __builtin_expect (size < sizeof (struct mo_file_header), 0))
     {
       /* Something went wrong.  */
       close (fd);
@@ -107,7 +393,7 @@ _nl_load_domain (domain_file)
   data = (struct mo_file_header *) mmap (NULL, size, PROT_READ,
 					 MAP_PRIVATE, fd, 0);
 
-  if (data != (struct mo_file_header *) -1)
+  if (__builtin_expect (data != (struct mo_file_header *) -1, 1))
     {
       /* mmap() call was successful.  */
       close (fd);
@@ -131,12 +417,15 @@ _nl_load_domain (domain_file)
       do
 	{
 	  long int nb = (long int) read (fd, read_ptr, to_read);
-	  if (nb == -1)
+	  if (nb <= 0)
 	    {
+#ifdef EINTR
+	      if (nb == -1 && errno == EINTR)
+		continue;
+#endif
 	      close (fd);
 	      return;
 	    }
-
 	  read_ptr += nb;
 	  to_read -= nb;
 	}
@@ -147,7 +436,8 @@ _nl_load_domain (domain_file)
 
   /* Using the magic number we can test whether it really is a message
      catalog file.  */
-  if (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED)
+  if (__builtin_expect (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED,
+			0))
     {
       /* The magic number is wrong: not a message catalog file.  */
 #ifdef HAVE_MMAP
@@ -159,12 +449,11 @@ _nl_load_domain (domain_file)
       return;
     }
 
-  domain_file->data
-    = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
-  if (domain_file->data == NULL)
+  domain = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
+  if (domain == NULL)
     return;
+  domain_file->data = domain;
 
-  domain = (struct loaded_domain *) domain_file->data;
   domain->data = (char *) data;
   domain->use_mmap = use_mmap;
   domain->mmap_size = size;
@@ -196,9 +485,62 @@ _nl_load_domain (domain_file)
       return;
     }
 
-  /* Show that one domain is changed.  This might make some cached
-     translations invalid.  */
-  ++_nl_msg_cat_cntr;
+  /* Now initialize the character set converter from the character set
+     the file is encoded with (found in the header entry) to the domain's
+     specified character set or the locale's character set.  */
+  nullentry = _nl_init_domain_conv (domain_file, domain, domainbinding);
+
+  /* Also look for a plural specification.  */
+  if (nullentry != NULL)
+    {
+      const char *plural;
+      const char *nplurals;
+
+      plural = strstr (nullentry, "plural=");
+      nplurals = strstr (nullentry, "nplurals=");
+      if (plural == NULL || nplurals == NULL)
+	goto no_plural;
+      else
+	{
+	  /* First get the number.  */
+	  char *endp;
+	  unsigned long int n;
+	  struct parse_args args;
+
+	  nplurals += 9;
+	  while (*nplurals != '\0' && isspace (*nplurals))
+	    ++nplurals;
+#if defined HAVE_STRTOUL || defined _LIBC
+	  n = strtoul (nplurals, &endp, 10);
+#else
+	  for (endp = nplurals, n = 0; *endp >= '0' && *endp <= '9'; endp++)
+	    n = n * 10 + (*endp - '0');
+#endif
+	  domain->nplurals = n;
+	  if (nplurals == endp)
+	    goto no_plural;
+
+	  /* Due to the restrictions bison imposes onto the interface of the
+	     scanner function we have to put the input string and the result
+	     passed up from the parser into the same structure which address
+	     is passed down to the parser.  */
+	  plural += 7;
+	  args.cp = plural;
+	  if (PLURAL_PARSE (&args) != 0)
+	    goto no_plural;
+	  domain->plural = args.res;
+	}
+    }
+  else
+    {
+      /* By default we are using the Germanic form: singular form only
+         for `one', the plural form otherwise.  Yes, this is also what
+         English is using since English is a Germanic language.  */
+    no_plural:
+      INIT_GERMANIC_PLURAL ();
+      domain->plural = &germanic_plural;
+      domain->nplurals = 2;
+    }
 }
 
 
@@ -208,11 +550,16 @@ internal_function
 _nl_unload_domain (domain)
      struct loaded_domain *domain;
 {
-#ifdef _POSIX_MAPPED_FILES
+  if (domain->plural != &germanic_plural)
+    __gettext_free_exp (domain->plural);
+
+  _nl_free_domain_conv (domain);
+
+# ifdef _POSIX_MAPPED_FILES
   if (domain->use_mmap)
     munmap ((caddr_t) domain->data, domain->mmap_size);
   else
-#endif	/* _POSIX_MAPPED_FILES */
+# endif	/* _POSIX_MAPPED_FILES */
     free ((void *) domain->data);
 
   free (domain);

intl/localcharset.c

@@ -0,0 +1,271 @@
+/* Determine a canonical name for the current locale's character encoding.
+
+   Copyright (C) 2000-2001 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+/* Written by Bruno Haible <haible@clisp.cons.org>.  */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#if HAVE_STDDEF_H
+# include <stddef.h>
+#endif
+
+#include <stdio.h>
+#if HAVE_STRING_H
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if defined _WIN32 || defined __WIN32__
+# undef WIN32   /* avoid warning on mingw32 */
+# define WIN32
+#endif
+
+#ifndef WIN32
+# if HAVE_LANGINFO_CODESET
+#  include <langinfo.h>
+# else
+#  if HAVE_SETLOCALE
+#   include <locale.h>
+#  endif
+# endif
+#else /* WIN32 */
+# define WIN32_LEAN_AND_MEAN
+# include <windows.h>
+#endif
+
+#ifndef DIRECTORY_SEPARATOR
+# define DIRECTORY_SEPARATOR '/'
+#endif
+
+#ifndef ISSLASH
+# define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
+#endif
+
+/* The following static variable is declared 'volatile' to avoid a
+   possible multithread problem in the function get_charset_aliases. If we
+   are running in a threaded environment, and if two threads initialize
+   'charset_aliases' simultaneously, both will produce the same value,
+   and everything will be ok if the two assignments to 'charset_aliases'
+   are atomic. But I don't know what will happen if the two assignments mix.  */
+#if __STDC__ != 1
+# define volatile /* empty */
+#endif
+/* Pointer to the contents of the charset.alias file, if it has already been
+   read, else NULL.  Its format is:
+   ALIAS_1 '\0' CANONICAL_1 '\0' ... ALIAS_n '\0' CANONICAL_n '\0' '\0'  */
+static const char * volatile charset_aliases;
+
+/* Return a pointer to the contents of the charset.alias file.  */
+static const char *
+get_charset_aliases ()
+{
+  const char *cp;
+
+  cp = charset_aliases;
+  if (cp == NULL)
+    {
+#ifndef WIN32
+      FILE *fp;
+      const char *dir = LIBDIR;
+      const char *base = "charset.alias";
+      char *file_name;
+
+      /* Concatenate dir and base into freshly allocated file_name.  */
+      {
+	size_t dir_len = strlen (dir);
+	size_t base_len = strlen (base);
+	int add_slash = (dir_len > 0 && !ISSLASH (dir[dir_len - 1]));
+	file_name = (char *) malloc (dir_len + add_slash + base_len + 1);
+	if (file_name != NULL)
+	  {
+	    memcpy (file_name, dir, dir_len);
+	    if (add_slash)
+	      file_name[dir_len] = DIRECTORY_SEPARATOR;
+	    memcpy (file_name + dir_len + add_slash, base, base_len + 1);
+	  }
+      }
+
+      if (file_name == NULL || (fp = fopen (file_name, "r")) == NULL)
+	/* Out of memory or file not found, treat it as empty.  */
+	cp = "";
+      else
+	{
+	  /* Parse the file's contents.  */
+	  int c;
+	  char buf1[50+1];
+	  char buf2[50+1];
+	  char *res_ptr = NULL;
+	  size_t res_size = 0;
+	  size_t l1, l2;
+
+	  for (;;)
+	    {
+	      c = getc (fp);
+	      if (c == EOF)
+		break;
+	      if (c == '\n' || c == ' ' || c == '\t')
+		continue;
+	      if (c == '#')
+		{
+		  /* Skip comment, to end of line.  */
+		  do
+		    c = getc (fp);
+		  while (!(c == EOF || c == '\n'));
+		  if (c == EOF)
+		    break;
+		  continue;
+		}
+	      ungetc (c, fp);
+	      if (fscanf(fp, "%50s %50s", buf1, buf2) < 2)
+		break;
+	      l1 = strlen (buf1);
+	      l2 = strlen (buf2);
+	      if (res_size == 0)
+		{
+		  res_size = l1 + 1 + l2 + 1;
+		  res_ptr = malloc (res_size + 1);
+		}
+	      else
+		{
+		  res_size += l1 + 1 + l2 + 1;
+		  res_ptr = realloc (res_ptr, res_size + 1);
+		}
+	      if (res_ptr == NULL)
+		{
+		  /* Out of memory. */
+		  res_size = 0;
+		  break;
+		}
+	      strcpy (res_ptr + res_size - (l2 + 1) - (l1 + 1), buf1);
+	      strcpy (res_ptr + res_size - (l2 + 1), buf2);
+	    }
+	  fclose (fp);
+	  if (res_size == 0)
+	    cp = "";
+	  else
+	    {
+	      *(res_ptr + res_size) = '\0';
+	      cp = res_ptr;
+	    }
+	}
+
+      if (file_name != NULL)
+	free (file_name);
+
+#else /* WIN32 */
+
+      /* To avoid the troubles of installing a separate file in the same
+	 directory as the DLL and of retrieving the DLL's directory at
+	 runtime, simply inline the aliases here.  */
+
+      cp = "CP936" "\0" "GBK" "\0"
+	   "CP1361" "\0" "JOHAB" "\0";
+#endif
+
+      charset_aliases = cp;
+    }
+
+  return cp;
+}
+
+/* Determine the current locale's character encoding, and canonicalize it
+   into one of the canonical names listed in config.charset.
+   The result must not be freed; it is statically allocated.
+   If the canonical name cannot be determined, the result is a non-canonical
+   name.  */
+
+#ifdef STATIC
+STATIC
+#endif
+const char *
+locale_charset ()
+{
+  const char *codeset;
+  const char *aliases;
+
+#ifndef WIN32
+
+# if HAVE_LANGINFO_CODESET
+
+  /* Most systems support nl_langinfo (CODESET) nowadays.  */
+  codeset = nl_langinfo (CODESET);
+
+# else
+
+  /* On old systems which lack it, use setlocale or getenv.  */
+  const char *locale = NULL;
+
+  /* But most old systems don't have a complete set of locales.  Some
+     (like SunOS 4 or DJGPP) have only the C locale.  Therefore we don't
+     use setlocale here; it would return "C" when it doesn't support the
+     locale name the user has set.  */
+#  if HAVE_SETLOCALE && 0
+  locale = setlocale (LC_CTYPE, NULL);
+#  endif
+  if (locale == NULL || locale[0] == '\0')
+    {
+      locale = getenv ("LC_ALL");
+      if (locale == NULL || locale[0] == '\0')
+	{
+	  locale = getenv ("LC_CTYPE");
+	  if (locale == NULL || locale[0] == '\0')
+	    locale = getenv ("LANG");
+	}
+    }
+
+  /* On some old systems, one used to set locale = "iso8859_1". On others,
+     you set it to "language_COUNTRY.charset". In any case, we resolve it
+     through the charset.alias file.  */
+  codeset = locale;
+
+# endif
+
+#else /* WIN32 */
+
+  static char buf[2 + 10 + 1];
+
+  /* Win32 has a function returning the locale's codepage as a number.  */
+  sprintf (buf, "CP%u", GetACP ());
+  codeset = buf;
+
+#endif
+
+  if (codeset == NULL)
+    /* The canonical name cannot be determined.  */
+    codeset = "";
+
+  /* Resolve alias. */
+  for (aliases = get_charset_aliases ();
+       *aliases != '\0';
+       aliases += strlen (aliases) + 1, aliases += strlen (aliases) + 1)
+    if (strcmp (codeset, aliases) == 0
+	|| (aliases[0] == '*' && aliases[1] == '\0'))
+      {
+	codeset = aliases + strlen (aliases) + 1;
+	break;
+      }
+
+  return codeset;
+}

intl/locale.alias

@@ -0,0 +1,78 @@
+# Locale name alias data base.
+# Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Library General Public License for more details.
+#
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
+
+# The format of this file is the same as for the corresponding file of
+# the X Window System, which normally can be found in
+#	/usr/lib/X11/locale/locale.alias
+# A single line contains two fields: an alias and a substitution value.
+# All entries are case independent.
+
+# Note: This file is far from being complete.  If you have a value for
+# your own site which you think might be useful for others too, share
+# it with the rest of us.  Send it using the `glibcbug' script to
+# bugs@gnu.org.
+
+# Packages using this file: 
+
+bokmal		no_NO.ISO-8859-1
+bokmål		no_NO.ISO-8859-1
+catalan		ca_ES.ISO-8859-1
+croatian	hr_HR.ISO-8859-2
+czech		cs_CZ.ISO-8859-2
+danish          da_DK.ISO-8859-1
+dansk		da_DK.ISO-8859-1
+deutsch		de_DE.ISO-8859-1
+dutch		nl_NL.ISO-8859-1
+eesti		et_EE.ISO-8859-1
+estonian	et_EE.ISO-8859-1
+finnish         fi_FI.ISO-8859-1
+français	fr_FR.ISO-8859-1
+french		fr_FR.ISO-8859-1
+galego		gl_ES.ISO-8859-1
+galician	gl_ES.ISO-8859-1
+german		de_DE.ISO-8859-1
+greek           el_GR.ISO-8859-7
+hebrew          he_IL.ISO-8859-8
+hrvatski	hr_HR.ISO-8859-2
+hungarian       hu_HU.ISO-8859-2
+icelandic       is_IS.ISO-8859-1
+italian         it_IT.ISO-8859-1
+japanese	ja_JP.eucJP
+japanese.euc	ja_JP.eucJP
+ja_JP		ja_JP.eucJP
+ja_JP.ujis	ja_JP.eucJP
+japanese.sjis	ja_JP.SJIS
+korean		ko_KR.eucKR
+korean.euc 	ko_KR.eucKR
+ko_KR		ko_KR.eucKR
+lithuanian      lt_LT.ISO-8859-13
+nb_NO		no_NO.ISO-8859-1
+nb_NO.ISO-8859-1 no_NO.ISO-8859-1
+norwegian       no_NO.ISO-8859-1
+nynorsk		nn_NO.ISO-8859-1
+polish          pl_PL.ISO-8859-2
+portuguese      pt_PT.ISO-8859-1
+romanian        ro_RO.ISO-8859-2
+russian         ru_RU.ISO-8859-5
+slovak          sk_SK.ISO-8859-2
+slovene         sl_SI.ISO-8859-2
+slovenian       sl_SI.ISO-8859-2
+spanish         es_ES.ISO-8859-1
+swedish         sv_SE.ISO-8859-1
+thai		th_TH.TIS-620
+turkish         tr_TR.ISO-8859-9

intl/localealias.c

@@ -1,20 +1,27 @@
 /* Handle aliases for locale names.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+   Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+   This must come before <config.h> because <config.h> may include
+   <features.h>, and once <features.h> has been included, it's too late.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE    1
+#endif
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
@@ -41,35 +48,15 @@ char *alloca ();
 # endif
 #endif
 
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
+#include <stdlib.h>
 
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-#  define _GNU_SOURCE	1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
+#include <string.h>
 #if !HAVE_STRCHR && !defined _LIBC
 # ifndef strchr
 #  define strchr index
 # endif
 #endif
 
-#include "gettext.h"
 #include "gettextP.h"
 
 /* @@ end of prolog @@ */
@@ -95,40 +82,14 @@ __libc_lock_define_initialized (static, lock);
 # define internal_function
 #endif
 
-/* For those loosing systems which don't have `alloca' we have to add
+/* For those losing systems which don't have `alloca' we have to add
    some additional code emulating it.  */
 #ifdef HAVE_ALLOCA
-/* Nothing has to be done.  */
-# define ADD_BLOCK(list, address) /* nothing */
-# define FREE_BLOCKS(list) /* nothing */
+# define freea(p) /* nothing */
 #else
-struct block_list
-{
-  void *address;
-  struct block_list *next;
-};
-# define ADD_BLOCK(list, addr)						      \
-  do {									      \
-    struct block_list *newp = (struct block_list *) malloc (sizeof (*newp));  \
-    /* If we cannot get a free block we cannot add the new element to	      \
-       the list.  */							      \
-    if (newp != NULL) {							      \
-      newp->address = (addr);						      \
-      newp->next = (list);						      \
-      (list) = newp;							      \
-    }									      \
-  } while (0)
-# define FREE_BLOCKS(list)						      \
-  do {									      \
-    while (list != NULL) {						      \
-      struct block_list *old = list;					      \
-      list = list->next;						      \
-      free (old);							      \
-    }									      \
-  } while (0)
-# undef alloca
-# define alloca(size) (malloc (size))
-#endif	/* have alloca */
+# define alloca(n) malloc (n)
+# define freea(p) free (p)
+#endif
 
 #if defined _LIBC_REENTRANT || defined HAVE_FGETS_UNLOCKED
 # undef fgets
@@ -147,18 +108,18 @@ struct alias_map
 };
 
 
-static char *string_space = NULL;
-static size_t string_space_act = 0;
-static size_t string_space_max = 0;
+static char *string_space;
+static size_t string_space_act;
+static size_t string_space_max;
 static struct alias_map *map;
-static size_t nmap = 0;
-static size_t maxmap = 0;
+static size_t nmap;
+static size_t maxmap;
 
 
 /* Prototypes for local functions.  */
 static size_t read_alias_file PARAMS ((const char *fname, int fname_len))
      internal_function;
-static void extend_alias_table PARAMS ((void));
+static int extend_alias_table PARAMS ((void));
 static int alias_compare PARAMS ((const struct alias_map *map1,
 				  const struct alias_map *map2));
 
@@ -204,11 +165,12 @@ _nl_expand_alias (name)
 	{
 	  const char *start;
 
-	  while (locale_alias_path[0] == ':')
+	  while (locale_alias_path[0] == PATH_SEPARATOR)
 	    ++locale_alias_path;
 	  start = locale_alias_path;
 
-	  while (locale_alias_path[0] != '\0' && locale_alias_path[0] != ':')
+	  while (locale_alias_path[0] != '\0'
+		 && locale_alias_path[0] != PATH_SEPARATOR)
 	    ++locale_alias_path;
 
 	  if (start < locale_alias_path)
@@ -231,16 +193,12 @@ read_alias_file (fname, fname_len)
      const char *fname;
      int fname_len;
 {
-#ifndef HAVE_ALLOCA
-  struct block_list *block_list = NULL;
-#endif
   FILE *fp;
   char *full_fname;
   size_t added;
   static const char aliasfile[] = "/locale.alias";
 
   full_fname = (char *) alloca (fname_len + sizeof aliasfile);
-  ADD_BLOCK (block_list, full_fname);
 #ifdef HAVE_MEMPCPY
   mempcpy (mempcpy (full_fname, fname, fname_len),
 	   aliasfile, sizeof aliasfile);
@@ -250,11 +208,9 @@ read_alias_file (fname, fname_len)
 #endif
 
   fp = fopen (full_fname, "r");
+  freea (full_fname);
   if (fp == NULL)
-    {
-      FREE_BLOCKS (block_list);
-      return 0;
-    }
+    return 0;
 
   added = 0;
   while (!feof (fp))
@@ -326,7 +282,8 @@ read_alias_file (fname, fname_len)
 		*cp++ = '\0';
 
 	      if (nmap >= maxmap)
-		extend_alias_table ();
+		if (__builtin_expect (extend_alias_table (), 0))
+		  return added;
 
 	      alias_len = strlen (alias) + 1;
 	      value_len = strlen (value) + 1;
@@ -339,10 +296,19 @@ read_alias_file (fname, fname_len)
 					? alias_len + value_len : 1024));
 		  char *new_pool = (char *) realloc (string_space, new_size);
 		  if (new_pool == NULL)
+		    return added;
+
+		  if (__builtin_expect (string_space != new_pool, 0))
 		    {
-		      FREE_BLOCKS (block_list);
-		      return added;
+		      size_t i;
+
+		      for (i = 0; i < nmap; i++)
+			{
+			  map[i].alias += new_pool - string_space;
+			  map[i].value += new_pool - string_space;
+			}
 		    }
+
 		  string_space = new_pool;
 		  string_space_max = new_size;
 		}
@@ -369,12 +335,11 @@ read_alias_file (fname, fname_len)
     qsort (map, nmap, sizeof (struct alias_map),
 	   (int (*) PARAMS ((const void *, const void *))) alias_compare);
 
-  FREE_BLOCKS (block_list);
   return added;
 }
 
 
-static void
+static int
 extend_alias_table ()
 {
   size_t new_size;
@@ -385,10 +350,11 @@ extend_alias_table ()
 						* sizeof (struct alias_map)));
   if (new_map == NULL)
     /* Simply don't extend: we don't have any more core.  */
-    return;
+    return -1;
 
   map = new_map;
   maxmap = new_size;
+  return 0;
 }
 
 

intl/ngettext.c

@@ -0,0 +1,68 @@
+/* Implementation of ngettext(3) function.
+   Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#ifdef _LIBC
+# define __need_NULL
+# include <stddef.h>
+#else
+# include <stdlib.h>		/* Just for NULL.  */
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+#include <locale.h>
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define NGETTEXT __ngettext
+# define DCNGETTEXT __dcngettext
+#else
+# define NGETTEXT ngettext__
+# define DCNGETTEXT dcngettext__
+#endif
+
+/* Look up MSGID in the current default message catalog for the current
+   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
+   text).  */
+char *
+NGETTEXT (msgid1, msgid2, n)
+     const char *msgid1;
+     const char *msgid2;
+     unsigned long int n;
+{
+  return DCNGETTEXT (NULL, msgid1, msgid2, n, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library.  */
+weak_alias (__ngettext, ngettext);
+#endif

intl/plural.y

@@ -0,0 +1,413 @@
+%{
+/* Expression parsing for plural form selection.
+   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
+   Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
+
+/* The bison generated parser uses alloca.  AIX 3 forces us to put this
+   declaration at the beginning of the file.  The declaration in bison's
+   skeleton file comes too late.  This must come before <config.h>
+   because <config.h> may include arbitrary system headers.  */
+#if defined _AIX && !defined __GNUC__
+ #pragma alloca
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdlib.h>
+#include "gettextP.h"
+
+/* Names for the libintl functions are a problem.  They must not clash
+   with existing names and they should follow ANSI C.  But this source
+   code is also used in GNU C Library where the names have a __
+   prefix.  So we have to make a difference here.  */
+#ifdef _LIBC
+# define FREE_EXPRESSION __gettext_free_exp
+#else
+# define FREE_EXPRESSION gettext_free_exp__
+# define __gettextparse gettextparse__
+#endif
+
+#define YYLEX_PARAM	&((struct parse_args *) arg)->cp
+#define YYPARSE_PARAM	arg
+%}
+%pure_parser
+%expect 10
+
+%union {
+  unsigned long int num;
+  enum operator op;
+  struct expression *exp;
+}
+
+%{
+/* Prototypes for local functions.  */
+static struct expression *new_exp PARAMS ((int nargs, enum operator op,
+					   struct expression * const *args));
+static inline struct expression *new_exp_0 PARAMS ((enum operator op));
+static inline struct expression *new_exp_1 PARAMS ((enum operator op,
+						   struct expression *right));
+static struct expression *new_exp_2 PARAMS ((enum operator op,
+					     struct expression *left,
+					     struct expression *right));
+static inline struct expression *new_exp_3 PARAMS ((enum operator op,
+						   struct expression *bexp,
+						   struct expression *tbranch,
+						   struct expression *fbranch));
+static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
+static void yyerror PARAMS ((const char *str));
+
+/* Allocation of expressions.  */
+
+static struct expression *
+new_exp (nargs, op, args)
+     int nargs;
+     enum operator op;
+     struct expression * const *args;
+{
+  int i;
+  struct expression *newp;
+
+  /* If any of the argument could not be malloc'ed, just return NULL.  */
+  for (i = nargs - 1; i >= 0; i--)
+    if (args[i] == NULL)
+      goto fail;
+
+  /* Allocate a new expression.  */
+  newp = (struct expression *) malloc (sizeof (*newp));
+  if (newp != NULL)
+    {
+      newp->nargs = nargs;
+      newp->operation = op;
+      for (i = nargs - 1; i >= 0; i--)
+	newp->val.args[i] = args[i];
+      return newp;
+    }
+
+ fail:
+  for (i = nargs - 1; i >= 0; i--)
+    FREE_EXPRESSION (args[i]);
+
+  return NULL;
+}
+
+static inline struct expression *
+new_exp_0 (op)
+     enum operator op;
+{
+  return new_exp (0, op, NULL);
+}
+
+static inline struct expression *
+new_exp_1 (op, right)
+     enum operator op;
+     struct expression *right;
+{
+  struct expression *args[1];
+
+  args[0] = right;
+  return new_exp (1, op, args);
+}
+
+static struct expression *
+new_exp_2 (op, left, right)
+     enum operator op;
+     struct expression *left;
+     struct expression *right;
+{
+  struct expression *args[2];
+
+  args[0] = left;
+  args[1] = right;
+  return new_exp (2, op, args);
+}
+
+static inline struct expression *
+new_exp_3 (op, bexp, tbranch, fbranch)
+     enum operator op;
+     struct expression *bexp;
+     struct expression *tbranch;
+     struct expression *fbranch;
+{
+  struct expression *args[3];
+
+  args[0] = bexp;
+  args[1] = tbranch;
+  args[2] = fbranch;
+  return new_exp (3, op, args);
+}
+
+%}
+
+/* This declares that all operators have the same associativity and the
+   precedence order as in C.  See [Harbison, Steele: C, A Reference Manual].
+   There is no unary minus and no bitwise operators.
+   Operators with the same syntactic behaviour have been merged into a single
+   token, to save space in the array generated by bison.  */
+%right '?'		/*   ?		*/
+%left '|'		/*   ||		*/
+%left '&'		/*   &&		*/
+%left EQUOP2		/*   == !=	*/
+%left CMPOP2		/*   < > <= >=	*/
+%left ADDOP2		/*   + -	*/
+%left MULOP2		/*   * / %	*/
+%right '!'		/*   !		*/
+
+%token <op> EQUOP2 CMPOP2 ADDOP2 MULOP2
+%token <num> NUMBER
+%type <exp> exp
+
+%%
+
+start:	  exp
+	  {
+	    if ($1 == NULL)
+	      YYABORT;
+	    ((struct parse_args *) arg)->res = $1;
+	  }
+	;
+
+exp:	  exp '?' exp ':' exp
+	  {
+	    $$ = new_exp_3 (qmop, $1, $3, $5);
+	  }
+	| exp '|' exp
+	  {
+	    $$ = new_exp_2 (lor, $1, $3);
+	  }
+	| exp '&' exp
+	  {
+	    $$ = new_exp_2 (land, $1, $3);
+	  }
+	| exp EQUOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| exp CMPOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| exp ADDOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| exp MULOP2 exp
+	  {
+	    $$ = new_exp_2 ($2, $1, $3);
+	  }
+	| '!' exp
+	  {
+	    $$ = new_exp_1 (lnot, $2);
+	  }
+	| 'n'
+	  {
+	    $$ = new_exp_0 (var);
+	  }
+	| NUMBER
+	  {
+	    if (($$ = new_exp_0 (num)) != NULL)
+	      $$->val.num = $1;
+	  }
+	| '(' exp ')'
+	  {
+	    $$ = $2;
+	  }
+	;
+
+%%
+
+void
+internal_function
+FREE_EXPRESSION (exp)
+     struct expression *exp;
+{
+  if (exp == NULL)
+    return;
+
+  /* Handle the recursive case.  */
+  switch (exp->nargs)
+    {
+    case 3:
+      FREE_EXPRESSION (exp->val.args[2]);
+      /* FALLTHROUGH */
+    case 2:
+      FREE_EXPRESSION (exp->val.args[1]);
+      /* FALLTHROUGH */
+    case 1:
+      FREE_EXPRESSION (exp->val.args[0]);
+      /* FALLTHROUGH */
+    default:
+      break;
+    }
+
+  free (exp);
+}
+
+
+static int
+yylex (lval, pexp)
+     YYSTYPE *lval;
+     const char **pexp;
+{
+  const char *exp = *pexp;
+  int result;
+
+  while (1)
+    {
+      if (exp[0] == '\0')
+	{
+	  *pexp = exp;
+	  return YYEOF;
+	}
+
+      if (exp[0] != ' ' && exp[0] != '\t')
+	break;
+
+      ++exp;
+    }
+
+  result = *exp++;
+  switch (result)
+    {
+    case '0': case '1': case '2': case '3': case '4':
+    case '5': case '6': case '7': case '8': case '9':
+      {
+	unsigned long int n = result - '0';
+	while (exp[0] >= '0' && exp[0] <= '9')
+	  {
+	    n *= 10;
+	    n += exp[0] - '0';
+	    ++exp;
+	  }
+	lval->num = n;
+	result = NUMBER;
+      }
+      break;
+
+    case '=':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = equal;
+	  result = EQUOP2;
+	}
+      else
+	result = YYERRCODE;
+      break;
+
+    case '!':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = not_equal;
+	  result = EQUOP2;
+	}
+      break;
+
+    case '&':
+    case '|':
+      if (exp[0] == result)
+	++exp;
+      else
+	result = YYERRCODE;
+      break;
+
+    case '<':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = less_or_equal;
+	}
+      else
+	lval->op = less_than;
+      result = CMPOP2;
+      break;
+
+    case '>':
+      if (exp[0] == '=')
+	{
+	  ++exp;
+	  lval->op = greater_or_equal;
+	}
+      else
+	lval->op = greater_than;
+      result = CMPOP2;
+      break;
+
+    case '*':
+      lval->op = mult;
+      result = MULOP2;
+      break;
+
+    case '/':
+      lval->op = divide;
+      result = MULOP2;
+      break;
+
+    case '%':
+      lval->op = module;
+      result = MULOP2;
+      break;
+
+    case '+':
+      lval->op = plus;
+      result = ADDOP2;
+      break;
+
+    case '-':
+      lval->op = minus;
+      result = ADDOP2;
+      break;
+
+    case 'n':
+    case '?':
+    case ':':
+    case '(':
+    case ')':
+      /* Nothing, just return the character.  */
+      break;
+
+    case ';':
+    case '\n':
+    case '\0':
+      /* Be safe and let the user call this function again.  */
+      --exp;
+      result = YYEOF;
+      break;
+
+    default:
+      result = YYERRCODE;
+#if YYDEBUG != 0
+      --exp;
+#endif
+      break;
+    }
+
+  *pexp = exp;
+
+  return result;
+}
+
+
+static void
+yyerror (str)
+     const char *str;
+{
+  /* Do nothing.  We don't print error messages here.  */
+}

intl/po2tbl.sed.in

@@ -1,102 +0,0 @@
-# po2tbl.sed - Convert Uniforum style .po file to lookup table for catgets
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-1 {
-  i\
-/* Automatically generated by po2tbl.sed from @PACKAGE NAME@.pot.  */\
-\
-#if HAVE_CONFIG_H\
-# include <config.h>\
-#endif\
-\
-#include "libgettext.h"\
-\
-const struct _msg_ent _msg_tbl[] = {
-  h
-  s/.*/0/
-  x
-}
-#
-# Write msgid entries in C array form.
-#
-/^msgid/ {
-  s/msgid[ 	]*\(".*"\)/  {\1/
-  tb
-# Append the next line
-  :b
-  N
-# Look whether second part is continuation line.
-  s/\(.*\)"\(\n\)"\(.*"\)/\1\2\3/
-# Yes, then branch.
-  ta
-# Because we assume that the input file correctly formed the line
-# just read cannot be again be a msgid line.  So it's safe to ignore
-# it.
-  s/\(.*\)\n.*/\1/
-  bc
-# We found a continuation line.  But before printing insert '\'.
-  :a
-  s/\(.*\)\(\n.*\)/\1\\\2/
-  P
-# We cannot use D here.
-  s/.*\n\(.*\)/\1/
-# Some buggy seds do not clear the `successful substitution since last ``t'''
-# flag on `N', so we do a `t' here to clear it.
-  tb
-# Not reached
-  :c
-  x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-  td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
-  :d
-  s/9\(_*\)$/_\1/
-  td
-# Assure at least one digit is available.
-  s/^\(_*\)$/0\1/
-# Increment the last digit.
-  s/8\(_*\)$/9\1/
-  s/7\(_*\)$/8\1/
-  s/6\(_*\)$/7\1/
-  s/5\(_*\)$/6\1/
-  s/4\(_*\)$/5\1/
-  s/3\(_*\)$/4\1/
-  s/2\(_*\)$/3\1/
-  s/1\(_*\)$/2\1/
-  s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
-  s/_/0/g
-  x
-  G
-  s/\(.*\)\n\([0-9]*\)/\1, \2},/
-  s/\(.*\)"$/\1/
-  p
-}
-#
-# Last line.
-#
-$ {
-  i\
-};\
-
-  g
-  s/0*\(.*\)/int _msg_tbl_length = \1;/p
-}
-d

intl/ref-add.sin

@@ -0,0 +1,31 @@
+# Add this package to a list of references stored in a text file.
+#
+#   Copyright (C) 2000 Free Software Foundation, Inc.
+#
+#   This program is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU Library General Public License as published
+#   by the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   Library General Public License for more details.
+#
+#   You should have received a copy of the GNU Library General Public
+#   License along with this program; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+#   USA.
+#
+# Written by Bruno Haible <haible@clisp.cons.org>.
+#
+/^# Packages using this file: / {
+  s/# Packages using this file://
+  ta
+  :a
+  s/ @PACKAGE@ / @PACKAGE@ /
+  tb
+  s/ $/ @PACKAGE@ /
+  :b
+  s/^/# Packages using this file:/
+}

intl/ref-del.sin

@@ -0,0 +1,26 @@
+# Remove this package from a list of references stored in a text file.
+#
+#   Copyright (C) 2000 Free Software Foundation, Inc.
+#
+#   This program is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU Library General Public License as published
+#   by the Free Software Foundation; either version 2, or (at your option)
+#   any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   Library General Public License for more details.
+#
+#   You should have received a copy of the GNU Library General Public
+#   License along with this program; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+#   USA.
+#
+# Written by Bruno Haible <haible@clisp.cons.org>.
+#
+/^# Packages using this file: / {
+  s/# Packages using this file://
+  s/ @PACKAGE@ / /
+  s/^/# Packages using this file:/
+}

intl/textdomain.c

@@ -1,42 +1,51 @@
 /* Implementation of the textdomain(3) function.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+   Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined STDC_HEADERS || defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
+#include <stdlib.h>
+#include <string.h>
 
 #ifdef _LIBC
 # include <libintl.h>
 #else
-# include "libgettext.h"
+# include "libgnuintl.h"
+#endif
+#include "gettextP.h"
+
+#ifdef _LIBC
+/* We have to handle multi-threaded applications.  */
+# include <bits/libc-lock.h>
+#else
+/* Provide dummy implementation if this is outside glibc.  */
+# define __libc_rwlock_define(CLASS, NAME)
+# define __libc_rwlock_wrlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+   names than the internal variables in GNU libc, otherwise programs
+   using libintl.a cannot be linked statically.  */
+#if !defined _LIBC
+# define _nl_default_default_domain _nl_default_default_domain__
+# define _nl_current_default_domain _nl_current_default_domain__
 #endif
 
 /* @@ end of prolog @@ */
@@ -61,6 +70,9 @@ extern const char *_nl_current_default_domain;
 # define TEXTDOMAIN textdomain__
 #endif
 
+/* Lock variable to protect the global data in the gettext implementation.  */
+__libc_rwlock_define (extern, _nl_state_lock)
+
 /* Set the current default message catalog to DOMAINNAME.
    If DOMAINNAME is null, return the current default.
    If DOMAINNAME is "", reset to the default of "messages".  */
@@ -68,38 +80,60 @@ char *
 TEXTDOMAIN (domainname)
      const char *domainname;
 {
-  char *old;
+  char *new_domain;
+  char *old_domain;
 
   /* A NULL pointer requests the current setting.  */
   if (domainname == NULL)
     return (char *) _nl_current_default_domain;
 
-  old = (char *) _nl_current_default_domain;
+  __libc_rwlock_wrlock (_nl_state_lock);
+
+  old_domain = (char *) _nl_current_default_domain;
 
   /* If domain name is the null string set to default domain "messages".  */
   if (domainname[0] == '\0'
       || strcmp (domainname, _nl_default_default_domain) == 0)
-    _nl_current_default_domain = _nl_default_default_domain;
+    {
+      _nl_current_default_domain = _nl_default_default_domain;
+      new_domain = (char *) _nl_current_default_domain;
+    }
+  else if (strcmp (domainname, old_domain) == 0)
+    /* This can happen and people will use it to signal that some
+       environment variable changed.  */
+    new_domain = old_domain;
   else
     {
       /* If the following malloc fails `_nl_current_default_domain'
 	 will be NULL.  This value will be returned and so signals we
 	 are out of core.  */
 #if defined _LIBC || defined HAVE_STRDUP
-      _nl_current_default_domain = strdup (domainname);
+      new_domain = strdup (domainname);
 #else
       size_t len = strlen (domainname) + 1;
-      char *cp = (char *) malloc (len);
-      if (cp != NULL)
-	memcpy (cp, domainname, len);
-      _nl_current_default_domain = cp;
+      new_domain = (char *) malloc (len);
+      if (new_domain != NULL)
+	memcpy (new_domain, domainname, len);
 #endif
+
+      if (new_domain != NULL)
+	_nl_current_default_domain = new_domain;
     }
 
-  if (old != _nl_default_default_domain)
-    free (old);
+  /* We use this possibility to signal a change of the loaded catalogs
+     since this is most likely the case and there is no other easy we
+     to do it.  Do it only when the call was successful.  */
+  if (new_domain != NULL)
+    {
+      ++_nl_msg_cat_cntr;
 
-  return (char *) _nl_current_default_domain;
+      if (old_domain != new_domain && old_domain != _nl_default_default_domain)
+	free (old_domain);
+    }
+
+  __libc_rwlock_unlock (_nl_state_lock);
+
+  return new_domain;
 }
 
 #ifdef _LIBC

intl/xopen-msg.sed

@@ -1,104 +0,0 @@
-# po2msg.sed - Convert Uniforum style .po file to X/Open style .msg file
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#
-# The first directive in the .msg should be the definition of the
-# message set number.  We use always set number 1.
-#
-1 {
-  i\
-$set 1 # Automatically created by po2msg.sed
-  h
-  s/.*/0/
-  x
-}
-#
-# We copy all comments into the .msg file.  Perhaps they can help.
-#
-/^#/ s/^#[ 	]*/$ /p
-#
-# We copy the original message as a comment into the .msg file.
-#
-/^msgid/ {
-# Does not work now
-#  /"$/! {
-#    s/\\$//
-#    s/$/ ... (more lines following)"/
-#  }
-  s/^msgid[ 	]*"\(.*\)"$/$ Original Message: \1/
-  p
-}
-#
-# The .msg file contains, other then the .po file, only the translations
-# but each given a unique ID.  Starting from 1 and incrementing by 1 for
-# each message we assign them to the messages.
-# It is important that the .po file used to generate the cat-id-tbl.c file
-# (with po-to-tbl) is the same as the one used here.  (At least the order
-# of declarations must not be changed.)
-#
-/^msgstr/ {
-  s/msgstr[ 	]*"\(.*\)"/\1/
-  x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-  td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
-  :d
-  s/9\(_*\)$/_\1/
-  td
-# Assure at least one digit is available.
-  s/^\(_*\)$/0\1/
-# Increment the last digit.
-  s/8\(_*\)$/9\1/
-  s/7\(_*\)$/8\1/
-  s/6\(_*\)$/7\1/
-  s/5\(_*\)$/6\1/
-  s/4\(_*\)$/5\1/
-  s/3\(_*\)$/4\1/
-  s/2\(_*\)$/3\1/
-  s/1\(_*\)$/2\1/
-  s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
-  s/_/0/g
-  x
-# Bring the line in the format `<number> <message>'
-  G
-  s/^[^\n]*$/& /
-  s/\(.*\)\n\([0-9]*\)/\2 \1/
-# Clear flag from last substitution.
-  tb
-# Append the next line.
-  :b
-  N
-# Look whether second part is a continuation line.
-  s/\(.*\n\)"\(.*\)"/\1\2/
-# Yes, then branch.
-  ta
-  P
-  D
-# Note that `D' includes a jump to the start!!
-# We found a continuation line.  But before printing insert '\'.
-  :a
-  s/\(.*\)\(\n.*\)/\1\\\2/
-  P
-# We cannot use the sed command `D' here
-  s/.*\n\(.*\)/\1/
-  tb
-}
-d

m4/.cvsignore

@@ -0,0 +1,2 @@
+Makefile.in
+Makefile

m4/Makefile.am

@@ -0,0 +1,2 @@
+EXTRA_DIST =	codeset.m4 glibc21.m4 progtest.m4 gettext.m4 iconv.m4 \
+		lcmessage.m4

m4/aclocal_inc.m4

@@ -0,0 +1,6 @@
+dnl AM_ACLOCAL_INCLUDE(macrodir)
+AC_DEFUN([AM_ACLOCAL_INCLUDE],
+[
+	test -n "$ACLOCAL_FLAGS" && ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
+	for k in $1 ; do ACLOCAL="$ACLOCAL -I $k" ; done
+])

m4/codeset.m4

@@ -0,0 +1,17 @@
+#serial AM1
+
+dnl From Bruno Haible.
+
+AC_DEFUN([NANO_AM_LANGINFO_CODESET],
+[
+  AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+    [AC_TRY_LINK([#include <langinfo.h>],
+      [char* cs = nl_langinfo(CODESET);],
+      am_cv_langinfo_codeset=yes,
+      am_cv_langinfo_codeset=no)
+    ])
+  if test $am_cv_langinfo_codeset = yes; then
+    AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+      [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+  fi
+])

m4/gettext.m4

@@ -2,15 +2,45 @@
 # Ulrich Drepper <drepper@cygnus.com>, 1995.
 #
 # This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# be used in projects which are not available under the GNU General Public
+# License or the GNU Library General Public License but which still want
+# to provide support for the GNU gettext functionality.
+# Please note that the actual code of the GNU gettext library is covered
+# by the GNU Library General Public License, and the rest of the GNU
+# gettext package package is covered by the GNU General Public License.
+# They are *not* in the public domain.
 
-# serial 108
+# serial 10
 
-AC_PREREQ(2.13)               dnl Minimum Autoconf version required.
-
-AC_DEFUN(NANO_AM_WITH_NLS,
+dnl Usage: NANO_AM_WITH_NLS([TOOLSYMBOL], [NEEDSYMBOL], [LIBDIR]).
+dnl If TOOLSYMBOL is specified and is 'use-libtool', then a libtool library
+dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl    depending on --{enable,disable}-{shared,static} and on the presence of
+dnl    AM-DISABLE-SHARED). Otherwise, a static library
+dnl    $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl    implementations (in libc or libintl) without the ngettext() function
+dnl    will be ignored.
+dnl LIBDIR is used to find the intl libraries.  If empty,
+dnl    the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl    and used.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl    Catalog format: none
+dnl    Catalog extension: none
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([NANO_AM_WITH_NLS],
   [AC_MSG_CHECKING([whether NLS is requested])
     dnl Default is enabled NLS
     AC_ARG_ENABLE(nls,
@@ -19,23 +49,15 @@ AC_DEFUN(NANO_AM_WITH_NLS,
     AC_MSG_RESULT($USE_NLS)
     AC_SUBST(USE_NLS)
 
+    BUILD_INCLUDED_LIBINTL=no
     USE_INCLUDED_LIBINTL=no
-
-    AC_ARG_WITH(locale-dir,
-      [  --with-locale-dir=DIR   specify locale directory],
-      LOCALE_DIR=$withval)
-    test -z "$LOCALE_DIR" && LOCALE_DIR='$(datadir)/locale'
-    AC_SUBST(LOCALE_DIR)
-
-    AC_ARG_WITH(gnu-locale-dir,
-      [  --with-gnu-locale-dir=DIR specify GNU locale directory],
-      GNU_LOCALE_DIR=$withval)
-    test -z "$GNU_LOCALE_DIR" && GNU_LOCALE_DIR='$(prefix)/share/locale'
-    AC_SUBST(GNU_LOCALE_DIR)
+    INTLLIBS=
 
     dnl If we use NLS figure out what method
     if test "$USE_NLS" = "yes"; then
-      AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested.])
+      AC_DEFINE(ENABLE_NLS, 1,
+        [Define to 1 if translation of program messages to the user's native language
+   is requested.])
       AC_MSG_CHECKING([whether included gettext is requested])
       AC_ARG_WITH(included-gettext,
         [  --with-included-gettext use the GNU gettext library included here],
@@ -46,83 +68,74 @@ AC_DEFUN(NANO_AM_WITH_NLS,
       nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
       if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
         dnl User does not insist on using GNU NLS library.  Figure out what
-        dnl to use.  If gettext or catgets are available (in this order) we
-        dnl use this.  Else we have to fall back to GNU NLS library.
-	dnl catgets is only used if permitted by option --with-catgets.
-	nls_cv_header_intl=
-	nls_cv_header_libgt=
+        dnl to use.  If GNU gettext is available we use this.  Else we have
+        dnl to fall back to GNU NLS library.
 	CATOBJEXT=NONE
 
-	AC_CHECK_HEADER(libintl.h,
-	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
-	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
-	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+        dnl Add a version number to the cache macros.
+        define(gt_cv_func_gnugettext_libc, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libc])
+        define(gt_cv_func_gnugettext_libintl, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libintl])
 
-	   if test "$gt_cv_func_gettext_libc" != "yes"; then
-	     AC_CHECK_LIB(intl, bindtextdomain,
-	       [AC_CHECK_LIB(intl, gettext)])
+	AC_CHECK_HEADER(libintl.h,
+	  [AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+	    [AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+	       [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
+	       gt_cv_func_gnugettext_libc=yes,
+	       gt_cv_func_gnugettext_libc=no)])
+
+	   if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+	     AC_CACHE_CHECK([for GNU gettext in libintl],
+	       gt_cv_func_gnugettext_libintl,
+	       [gt_save_LIBS="$LIBS"
+		LIBS="$LIBS -lintl $LIBICONV"
+		AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+		  [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
+		  gt_cv_func_gnugettext_libintl=yes,
+		  gt_cv_func_gnugettext_libintl=no)
+		LIBS="$gt_save_LIBS"])
 	   fi
 
-	   if test "$gt_cv_func_gettext_libc" = "yes" \
-	      || test "$ac_cv_lib_intl_gettext" = "yes"; then
-	      AC_DEFINE(HAVE_GETTEXT, 1,
-	  [Define to 1 if you have gettext and don't want to use GNU gettext.])
-	      NANO_AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
-	      if test "$MSGFMT" != "no"; then
-		AC_CHECK_FUNCS(dcgettext)
-		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-		NANO_AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
-			       return _nl_msg_cat_cntr],
-		  [CATOBJEXT=.gmo
-		   DATADIRNAME=share],
-		  [CATOBJEXT=.mo
-		   DATADIRNAME=lib])
-		INSTOBJEXT=.mo
-	      fi
-	    fi
+	   dnl If an already present or preinstalled GNU gettext() is found,
+	   dnl use it.  But if this macro is used in GNU gettext, and GNU
+	   dnl gettext is already preinstalled in libintl, we update this
+	   dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
+	   if test "$gt_cv_func_gnugettext_libc" = "yes" \
+	      || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
+		   && test "$PACKAGE" != gettext; }; then
+	     AC_DEFINE(HAVE_GETTEXT, 1,
+               [Define if the GNU gettext() function is already present or preinstalled.])
+
+	     if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+	       dnl If iconv() is in a separate libiconv library, then anyone
+	       dnl linking with libintl{.a,.so} also needs to link with
+	       dnl libiconv.
+	       INTLLIBS="-lintl $LIBICONV"
+	     fi
+
+	     gt_save_LIBS="$LIBS"
+	     LIBS="$LIBS $INTLLIBS"
+	     AC_CHECK_FUNCS(dcgettext)
+	     LIBS="$gt_save_LIBS"
+
+	     dnl Search for GNU msgfmt in the PATH.
+	     NANO_AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+	       [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
+	     AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+	     dnl Search for GNU xgettext in the PATH.
+	     NANO_AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+	       [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
+
+	     CATOBJEXT=.gmo
+	   fi
 	])
 
         if test "$CATOBJEXT" = "NONE"; then
-	  AC_MSG_CHECKING([whether catgets can be used])
-	  AC_ARG_WITH(catgets,
-	    [  --with-catgets          use catgets functions if available],
-	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
-	  AC_MSG_RESULT($nls_cv_use_catgets)
-
-	  if test "$nls_cv_use_catgets" = "yes"; then
-	    dnl No gettext in C library.  Try catgets next.
-	    AC_CHECK_LIB(i, main)
-	    AC_CHECK_FUNC(catgets,
-	      [AC_DEFINE(HAVE_CATGETS, 1,
-			 [Define as 1 if you have catgets and don't want to use GNU gettext.])
-	       INTLOBJS="\$(CATOBJS)"
-	       AC_PATH_PROG(GENCAT, gencat, no)dnl
-	       if test "$GENCAT" != "no"; then
-		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-		 if test "$GMSGFMT" = "no"; then
-		   NANO_AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
-		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
-		 fi
-		 NANO_AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		 USE_INCLUDED_LIBINTL=yes
-		 CATOBJEXT=.cat
-		 INSTOBJEXT=.cat
-		 DATADIRNAME=lib
-		 INTLDEPS='$(top_builddir)/intl/libintl.a'
-		 INTLLIBS=$INTLDEPS
-		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-		 nls_cv_header_intl=intl/libintl.h
-		 nls_cv_header_libgt=intl/libgettext.h
-	       fi])
-	  fi
-        fi
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  dnl Neither gettext nor catgets in included in the C library.
+	  dnl GNU gettext is not found in the C library.
 	  dnl Fall back on GNU gettext library.
 	  nls_cv_use_gnu_gettext=yes
         fi
@@ -132,27 +145,38 @@ AC_DEFUN(NANO_AM_WITH_NLS,
         dnl Mark actions used to generate GNU NLS library.
         INTLOBJS="\$(GETTOBJS)"
         NANO_AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+	  [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
         AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
         NANO_AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+	  [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
         AC_SUBST(MSGFMT)
+	BUILD_INCLUDED_LIBINTL=yes
 	USE_INCLUDED_LIBINTL=yes
         CATOBJEXT=.gmo
-        INSTOBJEXT=.mo
-        DATADIRNAME=share
-	INTLDEPS='$(top_builddir)/intl/libintl.a'
-	INTLLIBS=$INTLDEPS
-	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-        nls_cv_header_intl=intl/libintl.h
-        nls_cv_header_libgt=intl/libgettext.h
+	INTLLIBS="ifelse([$3],[],\$(top_builddir)/intl,[$3])/libintl.ifelse([$1], use-libtool, [l], [])a $LIBICONV"
+	LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
       fi
 
+      dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+      dnl Test whether we really found GNU msgfmt.
+      if test "$GMSGFMT" != ":"; then
+	dnl If it is no GNU msgfmt we define it as : so that the
+	dnl Makefiles still can work.
+	if $GMSGFMT --statistics /dev/null >/dev/null 2>&1; then
+	  : ;
+	else
+	  AC_MSG_RESULT(
+	    [found msgfmt program is not GNU msgfmt; ignore it])
+	  GMSGFMT=":"
+	fi
+      fi
+
+      dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
       dnl Test whether we really found GNU xgettext.
       if test "$XGETTEXT" != ":"; then
 	dnl If it is no GNU xgettext we define it as : so that the
 	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	if $XGETTEXT --omit-header /dev/null >/dev/null 2>&1; then
 	  : ;
 	else
 	  AC_MSG_RESULT(
@@ -161,29 +185,76 @@ AC_DEFUN(NANO_AM_WITH_NLS,
 	fi
       fi
 
-      # We need to process the po/ directory.
+      dnl We need to process the po/ directory.
       POSUB=po
-    else
-      DATADIRNAME=share
-      nls_cv_header_intl=intl/libintl.h
-      nls_cv_header_libgt=intl/libgettext.h
     fi
-    if test -z "$nls_cv_header_intl"; then
-      # Clean out junk possibly left behind by a previous configuration.
-      rm -f intl/libintl.h
-    fi
-    AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
     AC_OUTPUT_COMMANDS(
-     [case "$CONFIG_FILES" in *po/Makefile.in*)
-        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
-      esac])
+     [for ac_file in $CONFIG_FILES; do
+        # Support "outfile[:infile[:infile...]]"
+        case "$ac_file" in
+          *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+        esac
+        # PO directories have a Makefile.in generated from Makefile.in.in.
+        case "$ac_file" in */Makefile.in)
+          # Adjust a relative srcdir.
+          ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+          ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+          ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+          # In autoconf-2.13 it is called $ac_given_srcdir.
+          # In autoconf-2.50 it is called $srcdir.
+          test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+          case "$ac_given_srcdir" in
+            .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+            /*) top_srcdir="$ac_given_srcdir" ;;
+            *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+          esac
+          if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+            rm -f "$ac_dir/POTFILES"
+            test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+            sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," -e "\$s/\(.*\) \\\\/\1/" < "$ac_given_srcdir/$ac_dir/POTFILES.in" > "$ac_dir/POTFILES"
+            test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+            sed -e "/POTFILES =/r $ac_dir/POTFILES" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          fi
+          ;;
+        esac
+      done])
 
 
-    # If this is used in GNU gettext we have to set USE_NLS to `yes'
-    # because some of the sources are only built for this goal.
+    dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+    dnl to 'yes' because some of the testsuite requires it.
     if test "$PACKAGE" = gettext; then
-      USE_NLS=yes
-      USE_INCLUDED_LIBINTL=yes
+      BUILD_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+    dnl because plural.y uses bison specific features. It requires at least
+    dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+    dnl compile.
+    dnl bison is only needed for the maintainer (who touches plural.y). But in
+    dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+    dnl the rule in general Makefile. Now, some people carelessly touch the
+    dnl files or have a broken "make" program, hence the plural.c rule will
+    dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+    dnl present or too old.
+    AC_CHECK_PROGS([INTLBISON], [bison])
+    if test -z "$INTLBISON"; then
+      ac_verc_fail=yes
+    else
+      dnl Found it, now check the version.
+      AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+      ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+      case $ac_prog_version in
+        '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+        1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+           ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+        *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+      esac
+      AC_MSG_RESULT([$ac_prog_version])
+    fi
+    if test $ac_verc_fail = yes; then
+      INTLBISON=:
     fi
 
     dnl These rules are solely for the distribution goal.  While doing this
@@ -195,22 +266,38 @@ AC_DEFUN(NANO_AM_WITH_NLS,
     done
 
     dnl Make all variables we use known to autoconf.
+    AC_SUBST(BUILD_INCLUDED_LIBINTL)
     AC_SUBST(USE_INCLUDED_LIBINTL)
     AC_SUBST(CATALOGS)
     AC_SUBST(CATOBJEXT)
-    AC_SUBST(DATADIRNAME)
     AC_SUBST(GMOFILES)
-    AC_SUBST(INSTOBJEXT)
-    AC_SUBST(INTLDEPS)
     AC_SUBST(INTLLIBS)
     AC_SUBST(INTLOBJS)
     AC_SUBST(POFILES)
     AC_SUBST(POSUB)
+
+    dnl For backward compatibility. Some configure.ins may be using this.
+    nls_cv_header_intl=
+    nls_cv_header_libgt=
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    DATADIRNAME=share
+    AC_SUBST(DATADIRNAME)
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INSTOBJEXT=.mo
+    AC_SUBST(INSTOBJEXT)
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    GENCAT=gencat
+    AC_SUBST(GENCAT)
   ])
 
-AC_DEFUN(NANO_AM_GNU_GETTEXT,
+dnl Usage: Just like AM_WITH_NLS, which see.
+AC_DEFUN([NANO_AM_GNU_GETTEXT],
   [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
    AC_REQUIRE([AC_PROG_CC])dnl
+   AC_REQUIRE([AC_CANONICAL_HOST])dnl
    AC_REQUIRE([AC_PROG_RANLIB])dnl
    AC_REQUIRE([AC_ISC_POSIX])dnl
    AC_REQUIRE([AC_HEADER_STDC])dnl
@@ -220,21 +307,18 @@ AC_DEFUN(NANO_AM_GNU_GETTEXT,
    AC_REQUIRE([AC_TYPE_SIZE_T])dnl
    AC_REQUIRE([AC_FUNC_ALLOCA])dnl
    AC_REQUIRE([AC_FUNC_MMAP])dnl
+   AC_REQUIRE([nano_jm_GLIBC21])dnl
 
-   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h sys/param.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-strdup __argz_count __argz_stringify __argz_next])
-
-   if test "${ac_cv_func_stpcpy+set}" != "set"; then
-     AC_CHECK_FUNCS(stpcpy)
-   fi
-   if test "${ac_cv_func_stpcpy}" = "yes"; then
-     AC_DEFINE(HAVE_STPCPY, 1, [Define to 1 if you have the stpcpy function.])
-   fi
+   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+   AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getcwd getegid geteuid \
+getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
+strdup strtoul tsearch __argz_count __argz_stringify __argz_next])
 
+   NANO_AM_ICONV
+   NANO_AM_LANGINFO_CODESET
    NANO_AM_LC_MESSAGES
-   NANO_AM_WITH_NLS
+   NANO_AM_WITH_NLS([$1],[$2],[$3])
 
    if test "x$CATOBJEXT" != "x"; then
      if test "x$ALL_LINGUAS" = "x"; then
@@ -242,10 +326,21 @@ strdup __argz_count __argz_stringify __argz_next])
      else
        AC_MSG_CHECKING(for catalogs to be installed)
        NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
+       for presentlang in $ALL_LINGUAS; do
+         useit=no
+         for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
+           # Use the presentlang catalog if desiredlang is
+           #   a. equal to presentlang, or
+           #   b. a variant of presentlang (because in this case,
+           #      presentlang can be used as a fallback for messages
+           #      which are not translated in the desiredlang catalog).
+           case "$desiredlang" in
+             "$presentlang"*) useit=yes;;
+           esac
+         done
+         if test $useit = yes; then
+           NEW_LINGUAS="$NEW_LINGUAS $presentlang"
+         fi
        done
        LINGUAS=$NEW_LINGUAS
        AC_MSG_RESULT($LINGUAS)
@@ -257,47 +352,8 @@ strdup __argz_count __argz_stringify __argz_next])
      fi
    fi
 
-   dnl The reference to <locale.h> in the installed <libintl.h> file
-   dnl must be resolved because we cannot expect the users of this
-   dnl to define HAVE_LOCALE_H.
-   if test $ac_cv_header_locale_h = yes; then
-     INCLUDE_LOCALE_H="#include <locale.h>"
-   else
-     INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>.  Take care yourself.  */"
-   fi
-   AC_SUBST(INCLUDE_LOCALE_H)
-
-   dnl Determine which catalog format we have (if any is needed)
-   dnl For now we know about two different formats:
-   dnl   Linux libc-5 and the normal X/Open format
-   test -d intl || mkdir intl
-   if test "$CATOBJEXT" = ".cat"; then
-     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
-     dnl Transform the SED scripts while copying because some dumb SEDs
-     dnl cannot handle comments.
-     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
-   fi
-   dnl po2tbl.sed is always needed.
-   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
-     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
-   dnl In the intl/Makefile.in we have a special dependency which makes
-   dnl only sense for gettext.  We comment this out for non-gettext
-   dnl packages.
-   if test "$PACKAGE" = "gettext"; then
-     GT_NO="#NO#"
-     GT_YES=
-   else
-     GT_NO=
-     GT_YES="#YES#"
-   fi
-   AC_SUBST(GT_NO)
-   AC_SUBST(GT_YES)
-
    dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+   dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
    dnl Try to locate is.
    MKINSTALLDIRS=
    if test -n "$ac_aux_dir"; then
@@ -308,22 +364,7 @@ strdup __argz_count __argz_stringify __argz_next])
    fi
    AC_SUBST(MKINSTALLDIRS)
 
-   dnl *** For now the libtool support in intl/Makefile is not for real.
-   l=
-   AC_SUBST(l)
-
-   dnl Generate list of files to be processed by xgettext which will
-   dnl be included in po/Makefile.
-   test -d po || mkdir po
-   case "$srcdir" in
-   .)
-     posrcprefix="../" ;;
-   /* | [[A-Za-z]]:*)
-     posrcprefix="$srcdir/" ;;
-   *)
-     posrcprefix="../$srcdir/" ;;
-   esac
-   rm -f po/POTFILES
-   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-	< $srcdir/po/POTFILES.in > po/POTFILES
+   dnl Enable libtool support if the surrounding package wishes it.
+   INTL_LIBTOOL_SUFFIX_PREFIX=ifelse([$1], use-libtool, [l], [])
+   AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
   ])

m4/glibc21.m4

@@ -0,0 +1,26 @@
+#serial 2
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([nano_jm_GLIBC21],
+  [
+    AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+      ac_cv_gnu_library_2_1,
+      [AC_EGREP_CPP([Lucky GNU user],
+	[
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+  Lucky GNU user
+ #endif
+#endif
+	],
+	ac_cv_gnu_library_2_1=yes,
+	ac_cv_gnu_library_2_1=no)
+      ]
+    )
+    AC_SUBST(GLIBC21)
+    GLIBC21="$ac_cv_gnu_library_2_1"
+  ]
+)

m4/iconv.m4

@@ -0,0 +1,69 @@
+#serial AM2
+
+dnl From Bruno Haible.
+
+AC_DEFUN([NANO_AM_ICONV],
+[
+  dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+  dnl those with the standalone portable GNU libiconv installed).
+
+  AC_ARG_WITH([libiconv-prefix],
+[  --with-libiconv-prefix=DIR  search for libiconv in DIR/include and DIR/lib], [
+    for dir in `echo "$withval" | tr : ' '`; do
+      if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi
+      if test -d $dir/lib; then LDFLAGS="$LDFLAGS -L$dir/lib"; fi
+    done
+   ])
+
+  AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+      [iconv_t cd = iconv_open("","");
+       iconv(cd,NULL,NULL,NULL,NULL);
+       iconv_close(cd);],
+      am_cv_func_iconv=yes)
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS -liconv"
+      AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+        [iconv_t cd = iconv_open("","");
+         iconv(cd,NULL,NULL,NULL,NULL);
+         iconv_close(cd);],
+        am_cv_lib_iconv=yes
+        am_cv_func_iconv=yes)
+      LIBS="$am_save_LIBS"
+    fi
+  ])
+  if test "$am_cv_func_iconv" = yes; then
+    AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+    AC_MSG_CHECKING([for iconv declaration])
+    AC_CACHE_VAL(am_cv_proto_iconv, [
+      AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+    am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+    AC_MSG_RESULT([$]{ac_t:-
+         }[$]am_cv_proto_iconv)
+    AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+      [Define as const if the declaration of iconv() needs const.])
+  fi
+  LIBICONV=
+  if test "$am_cv_lib_iconv" = yes; then
+    LIBICONV="-liconv"
+  fi
+  AC_SUBST(LIBICONV)
+])

m4/largefile.m4

@@ -1,92 +0,0 @@
-#serial 19
-
-dnl By default, many hosts won't let programs access large files;
-dnl one must use special compiler options to get large-file access to work.
-dnl For more details about this brain damage please see:
-dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
-
-dnl Written by Paul Eggert <eggert@twinsun.com>.
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_TEST_INCLUDES
-AC_DEFUN(AC_SYS_LARGEFILE_TEST_INCLUDES,
-  [[#include <sys/types.h>
-    /* Check that off_t can represent 2**63 - 1 correctly.
-       We can't simply "#define LARGE_OFF_T 9223372036854775807",
-       since some C++ compilers masquerading as C compilers
-       incorrectly reject 9223372036854775807.  */
-#   define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-    int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-			&& LARGE_OFF_T % 2147483647 == 1)
-		       ? 1 : -1];
-  ]])
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, VALUE, CACHE-VAR, COMMENT, INCLUDES, FUNCTION-BODY)
-AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
-  [AC_CACHE_CHECK([for $1 value needed for large files], $3,
-     [$3=no
-      AC_TRY_COMPILE([$5],
-	[$6], 
-	,
-	[AC_TRY_COMPILE([#define $1 $2]
-[$5]
-	   ,
-	   [$6],
-	   [$3=$2])])])
-   if test "[$]$3" != no; then
-     AC_DEFINE_UNQUOTED([$1], [$]$3, [$4])
-   fi])
-
-AC_DEFUN(NANO_AC_SYS_LARGEFILE,
-  [AC_REQUIRE([AC_PROG_CC])
-   AC_ARG_ENABLE(largefile,
-     [  --disable-largefile     omit support for large files])
-   if test "$enable_largefile" != no; then
-
-     AC_CACHE_CHECK([for special C compiler options needed for large files],
-       ac_cv_sys_largefile_CC,
-       [ac_cv_sys_largefile_CC=no
-        if test "$GCC" != yes; then
-	  # IRIX 6.2 and later do not support large files by default,
-	  # so use the C compiler's -n32 option if that helps.
-	  AC_TRY_COMPILE(AC_SYS_LARGEFILE_TEST_INCLUDES, , ,
-	    [ac_save_CC="$CC"
-	     CC="$CC -n32"
-	     AC_TRY_COMPILE(AC_SYS_LARGEFILE_TEST_INCLUDES, ,
-	       ac_cv_sys_largefile_CC=' -n32')
-	     CC="$ac_save_CC"])
-        fi])
-     if test "$ac_cv_sys_largefile_CC" != no; then
-       CC="$CC$ac_cv_sys_largefile_CC"
-     fi
-
-     AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS, 64,
-       ac_cv_sys_file_offset_bits,
-       [Number of bits in a file offset, on hosts where this is settable.],
-       AC_SYS_LARGEFILE_TEST_INCLUDES)
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES, 1,
-       ac_cv_sys_large_files,
-       [Define for large files, on AIX-style hosts.],
-       AC_SYS_LARGEFILE_TEST_INCLUDES)
-   fi
-  ])
-
-AC_DEFUN(AC_FUNC_FSEEKO,
-  [AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE, 1,
-     ac_cv_sys_largefile_source,
-     [Define to make fseeko visible on some hosts (e.g. glibc 2.2).],
-     [#include <stdio.h>], [return !fseeko;])
-   # We used to try defining _XOPEN_SOURCE=500 too, to work around a bug
-   # in glibc 2.1.3, but that breaks too many other things.
-   # If you want fseeko and ftello with glibc, upgrade to a fixed glibc.
-
-   AC_CACHE_CHECK([for fseeko], ac_cv_func_fseeko,
-     [ac_cv_func_fseeko=no
-      AC_TRY_LINK([#include <stdio.h>],
-        [return fseeko && fseeko (stdin, 0, 0);],
-	[ac_cv_func_fseeko=yes])])
-   if test $ac_cv_func_fseeko != no; then
-     AC_DEFINE(HAVE_FSEEKO, 1,
-       [Define if fseeko (and presumably ftello) exists and is declared.])
-   fi])

m4/lcmessage.m4

@@ -2,21 +2,23 @@
 # Ulrich Drepper <drepper@cygnus.com>, 1995.
 #
 # This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# be used in projects which are not available under the GNU General Public
+# License or the GNU Library General Public License but which still want
+# to provide support for the GNU gettext functionality.
+# Please note that the actual code of the GNU gettext library is covered
+# by the GNU Library General Public License, and the rest of the GNU
+# gettext package package is covered by the GNU General Public License.
+# They are *not* in the public domain.
 
 # serial 2
 
-AC_PREREQ(2.13)               dnl Minimum Autoconf version required.
-
-AC_DEFUN(NANO_AM_LC_MESSAGES,
+AC_DEFUN([NANO_AM_LC_MESSAGES],
   [if test $ac_cv_header_locale_h = yes; then
     AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
       [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
        am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
     if test $am_cv_val_LC_MESSAGES = yes; then
       AC_DEFINE(HAVE_LC_MESSAGES, 1,
-		[Define if your locale.h file contains LC_MESSAGES.])
+        [Define if your <locale.h> file defines LC_MESSAGES.])
     fi
   fi])

m4/progtest.m4

@@ -2,15 +2,19 @@
 # Ulrich Drepper <drepper@cygnus.com>, 1996.
 #
 # This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# be used in projects which are not available under the GNU General Public
+# License or the GNU Library General Public License but which still want
+# to provide support for the GNU gettext functionality.
+# Please note that the actual code of the GNU gettext library is covered
+# by the GNU Library General Public License, and the rest of the GNU
+# gettext package package is covered by the GNU General Public License.
+# They are *not* in the public domain.
 
-# serial 1
+# serial 2
 
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl NANO_AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
 dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(NANO_AM_PATH_PROG_WITH_TEST,
+AC_DEFUN([NANO_AM_PATH_PROG_WITH_TEST],
 [# Extract the first word of "$2", so it can be a program name with args.
 set dummy $2; ac_word=[$]2
 AC_MSG_CHECKING([for $ac_word])
@@ -38,7 +42,7 @@ ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
   ;;
 esac])dnl
 $1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
   AC_MSG_RESULT([$]$1)
 else
   AC_MSG_RESULT(no)

missing

@@ -1,190 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing - GNU libit 0.0"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`configure.in'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`configure.in'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`configure.in'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0

mkinstalldirs

@@ -1,40 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-# $Id$
-
-errstatus=0
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here

move.c

@@ -2,10 +2,10 @@
 /**************************************************************************
  *   move.c                                                               *
  *                                                                        *
- *   Copyright (C) 1999 Chris Allegretta                                  *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
  *   This program is free software; you can redistribute it and/or modify *
  *   it under the terms of the GNU General Public License as published by *
- *   the Free Software Foundation; either version 1, or (at your option)  *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
  *   any later version.                                                   *
  *                                                                        *
  *   This program is distributed in the hope that it will be useful,      *
@@ -27,7 +27,7 @@
 #include "proto.h"
 #include "nano.h"
 
-#ifndef NANO_SMALL
+#ifdef ENABLE_NLS
 #include <libintl.h>
 #define _(string) gettext(string)
 #else
@@ -113,12 +113,8 @@ int do_down(void)
     wrap_reset();
     if (current->next != NULL) {
 	update_line(current->prev, 0);
-
 	if (placewewant > 0)
 	    current_x = actual_x(current->next, placewewant);
-
-	if (current_x > strlen(current->next->data))
-	    current_x = strlen(current->next->data);
     } else {
 	UNSET(KEEP_CUTBUFFER);
 	check_statblank();
@@ -193,9 +189,6 @@ int do_up(void)
     if (current->prev != NULL) {
 	if (placewewant > 0)
 	    current_x = actual_x(current->prev, placewewant);
-
-	if (current_x > strlen(current->prev->data))
-	    current_x = strlen(current->prev->data);
     }
     if (current_y > 0)
 	current_y--;

nano.1

@@ -1,12 +1,12 @@
 .\" Hey, EMACS: -*- nroff -*-
-.\" nano.1 is copyright 1999-2000 by
+.\" nano.1 is copyright 1999-2002 by
 .\" Chris Allegretta <chrisa@asty.org>
 .\"
 .\" This is free documentation, see the latest version of the GNU General
 .\" Public License for copying conditions. There is NO warranty.
 .\"
 .\" $Id$
-.TH NANO 1 "October 3, 2001"
+.TH NANO 1 "January 3, 2002"
 .\" Please adjust this date whenever revising the manpage.
 .\"
 .SH NAME
@@ -37,9 +37,20 @@ Write file in DOS format.
 .B \-F (\-\-multibuffer)
 Enable multiple file buffers (if available).
 .TP
+.B \-K (\-\-keypad)
+Do not use the ncurses keypad() call unless necessary.  Try this flag if 
+you find that the arrow keys on the numeric keypad do not work for you 
+under nano.
+.TP
 .B \-M (\-\-mac)
 Write file in Mac format.
 .TP
+.B \-N (\-\-noconvert)
+Disable automatic conversion of files from DOS/Mac format.
+.TP
+.B \-Q [str] (\-\-quotestr=[str])
+Set the quoting string for justifying.  The default is "> ".
+.TP
 .B \-R (\-\-regexp)
 Enable regular expression matching for search strings, as well as
 \\n subexpression replacement for replace strings, if available.
@@ -54,6 +65,9 @@ Set the size (width) of a tab.
 .B \-V (\-\-version)
 Show the current version number and author.
 .TP
+.B \-Y (\-\-syntax=[str])
+Specify a specific syntax hilighting from the .nanorc to use (if available).
+.TP
 .B \-c (\-\-const)
 Constantly show the cursor position.
 .TP
@@ -68,7 +82,7 @@ source code.
 Enable cut from cursor to end of line with ^K.
 .TP
 .B \-l (\-\-nofollow)
-If the file being edited is a symbolic link, replace the link with a 
+If the file being edited is a symbolic link, replace the link with
 a new file, do not follow it.  Good for editing files in /tmp, perhaps?
 .TP
 .B \-m (\-\-mouse)
@@ -116,9 +130,11 @@ Nano will try to dump the buffer into an emergency file in some cases.
 Mainly, this will happen if Nano receives a SIGHUP or runs out of
 memory, when it will write the buffer into a file named "nano.save" if the
 buffer didn't have a name already, or will add a ".save" suffix to the
-current filename. In multibuffer mode, nano will write all the open buffers to
-the respective emergency files. Nano will \fBnot\fP write this file if a
-previous one exists in the current directory.
+current filename. If an emergency file with that name already exists in
+the current directory, ".save" and a number (e.g. ".save.1") will be
+suffixed to the current filename in order to make it unique. In
+multibuffer mode, nano will write all the open buffers to the respective
+emergency files.
 .SH BUGS
 Please send any comments or bug reports to
 .br
@@ -126,8 +142,8 @@ Please send any comments or bug reports to
 .br
 The nano mailing list is available from
 .br
-.B nano-devel@lists.sourceforge.net.
-To subscribe, email to nano-devel-request@lists.sourceforge.net with a
+.B nano-devel@gnu.org.
+To subscribe, email to nano-devel-request@gnu.org with a
 subject of "subscribe".
 .SH HOMEPAGE
 http://www.nano-editor.org
@@ -135,5 +151,5 @@ http://www.nano-editor.org
 Chris Allegretta <chrisa@asty.org>, et al (see AUTHORS and THANKS for
 details).
 This manual page was originally written by Jordi Mallach
-<jordi@sindominio.net>, for the Debian GNU/Linux system (but may be
+<jordi@sindominio.net>, for the Debian GNU system (but may be
 used by others).

nano.1.html

@@ -3,7 +3,7 @@ Content-type: text/html
 <HTML><HEAD><TITLE>Manpage of NANO</TITLE>
 </HEAD><BODY>
 <H1>NANO</H1>
-Section: User Commands  (1)<BR>Updated: October 3, 2001<BR><A HREF="#index">Index</A>
+Section: User Commands  (1)<BR>Updated: January 3, 2002<BR><A HREF="#index">Index</A>
 <A HREF="http://localhost/cgi-bin/man/man2html">Return to Main Contents</A><HR>
 
 
@@ -52,10 +52,24 @@ Write file in DOS format.
 
 <DD>
 Enable multiple file buffers (if available).
+<DT><B>-K (--keypad)</B>
+
+<DD>
+Do not use the ncurses keypad() call unless necessary.  Try this flag if 
+you find that the arrow keys on the numeric keypad do not work for you 
+under nano.
 <DT><B>-M (--mac)</B>
 
 <DD>
 Write file in Mac format.
+<DT><B>-N (--noconvert)</B>
+
+<DD>
+Disable automatic conversion of files from DOS/Mac format.
+<DT><B>-Q [str] (--quotestr=[str])</B>
+
+<DD>
+Set the quoting string for justifying.  The default is &quot;&gt; &quot;.
 <DT><B>-R (--regexp)</B>
 
 <DD>
@@ -74,6 +88,10 @@ Set the size (width) of a tab.
 
 <DD>
 Show the current version number and author.
+<DT><B>-Y (--syntax=[str])</B>
+
+<DD>
+Specify a specific syntax hilighting from the .nanorc to use (if available).
 <DT><B>-c (--const)</B>
 
 <DD>
@@ -94,7 +112,7 @@ Enable cut from cursor to end of line with ^K.
 <DT><B>-l (--nofollow)</B>
 
 <DD>
-If the file being edited is a symbolic link, replace the link with a 
+If the file being edited is a symbolic link, replace the link with
 a new file, do not follow it.  Good for editing files in /tmp, perhaps?
 <DT><B>-m (--mouse)</B>
 
@@ -157,9 +175,11 @@ Nano will try to dump the buffer into an emergency file in some cases.
 Mainly, this will happen if Nano receives a SIGHUP or runs out of
 memory, when it will write the buffer into a file named &quot;nano.save&quot; if the
 buffer didn't have a name already, or will add a &quot;.save&quot; suffix to the
-current filename. In multibuffer mode, nano will write all the open buffers to
-the respective emergency files. Nano will <B>not</B> write this file if a
-previous one exists in the current directory.
+current filename. If an emergency file with that name already exists in
+the current directory, &quot;.save&quot; and a number (e.g. &quot;.save.1&quot;) will be
+suffixed to the current filename in order to make it unique. In
+multibuffer mode, nano will write all the open buffers to the respective
+emergency files.
 <A NAME="lbAG">&nbsp;</A>
 <H2>BUGS</H2>
 
@@ -173,9 +193,9 @@ Please send any comments or bug reports to
 The nano mailing list is available from
 <BR>
 
-<B><A HREF="mailto:nano-devel@lists.sourceforge.net">nano-devel@lists.sourceforge.net</A>.</B>
+<B><A HREF="mailto:nano-devel@gnu.org">nano-devel@gnu.org</A>.</B>
 
-To subscribe, email to <A HREF="mailto:nano-devel-request@lists.sourceforge.net">nano-devel-request@lists.sourceforge.net</A> with a
+To subscribe, email to <A HREF="mailto:nano-devel-request@gnu.org">nano-devel-request@gnu.org</A> with a
 subject of &quot;subscribe&quot;.
 <A NAME="lbAH">&nbsp;</A>
 <H2>HOMEPAGE</H2>
@@ -187,7 +207,7 @@ subject of &quot;subscribe&quot;.
 Chris Allegretta &lt;<A HREF="mailto:chrisa@asty.org">chrisa@asty.org</A>&gt;, et al (see AUTHORS and THANKS for
 details).
 This manual page was originally written by Jordi Mallach
-&lt;<A HREF="mailto:jordi@sindominio.net">jordi@sindominio.net</A>&gt;, for the Debian GNU/Linux system (but may be
+&lt;<A HREF="mailto:jordi@sindominio.net">jordi@sindominio.net</A>&gt;, for the Debian GNU system (but may be
 used by others).
 <P>
 
@@ -207,6 +227,6 @@ used by others).
 This document was created by
 <A HREF="http://localhost/cgi-bin/man/man2html">man2html</A>,
 using the manual pages.<BR>
-Time: 01:18:43 GMT, October 04, 2001
+Time: 19:17:30 GMT, May 08, 2002
 </BODY>
 </HTML>

nano.h

@@ -2,10 +2,10 @@
 /**************************************************************************
  *   nano.h                                                               *
  *                                                                        *
- *   Copyright (C) 1999 Chris Allegretta                                  *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
  *   This program is free software; you can redistribute it and/or modify *
  *   it under the terms of the GNU General Public License as published by *
- *   the Free Software Foundation; either version 1, or (at your option)  *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
  *   any later version.                                                   *
  *                                                                        *
  *   This program is distributed in the hope that it will be useful,      *
@@ -73,21 +73,34 @@ typedef struct filestruct {
     char *data;
     struct filestruct *next;	/* Next node */
     struct filestruct *prev;	/* Previous node */
+    int lineno;			/* The line number */
+} filestruct;
 
 #ifdef ENABLE_MULTIBUFFER
-    struct filestruct *file;	/* Current file */
+typedef struct openfilestruct {
+    char *filename;
+    struct openfilestruct *next;	/* Next node */
+    struct openfilestruct *prev;	/* Previous node */
+    struct filestruct *fileage;	/* Current file */
+    struct filestruct *filebot;	/* Current file's last line */
+#ifndef NANO_SMALL
+    struct filestruct *file_mark_beginbuf;
+				/* Current file's beginning marked line */
+    int file_mark_beginx;	/* Current file's beginning marked line's
+				   x-coordinate position */
+#endif
     int file_current_x;		/* Current file's x-coordinate position */
     int file_current_y;		/* Current file's y-coordinate position */
-    int file_modified;		/* Current file's modification status */
-    char *file_path;		/* Current file's full path location */
+    int file_flags;		/* Current file's flags: modification
+				   status (and marking status, if
+				   available) */
     int file_placewewant;	/* Current file's place we want */
     int file_totlines;		/* Current file's total number of lines */
-    int file_totsize;		/* Current file's total size */
+    long file_totsize;		/* Current file's total size */
+    int file_lineno;		/* Current file's line number */
+} openfilestruct;
 #endif
 
-    long lineno;		/* The line number */
-} filestruct;
-
 typedef struct shortcut {
    int val;		/* Actual sequence that generates the keystroke */
    int altval;		/* Alt key # for this function, or 0 for none */
@@ -95,18 +108,20 @@ typedef struct shortcut {
    int misc2;
    int viewok;		/* is this function legal in view mode? */
    int (*func) (void);	/* Function to call when we catch this key */
-   char *desc;		/* Description, e.g. "Page Up" */
-   char *help;		/* Help file entry text */
+   const char *desc;	/* Description, e.g. "Page Up" */
+#ifndef DISABLE_HELP
+   const char *help;	/* Help file entry text */
+#endif
+   struct shortcut *next;
 } shortcut;
 
 typedef struct toggle {
    int val;		/* Sequence to toggle the key.  Should only need 1 */
-   char *desc;		/* Description for when toggle is, uh, toggled,
+   const char *desc;	/* Description for when toggle is, uh, toggled,
 			   e.g. "Pico Messages"; we'll append Enabled or
 			   Disabled */
    int flag;		/* What flag actually gets toggled */
-   char override_ch;	/* The character to display on the help screen,
-			   if it isn't NULL */
+   struct toggle *next;
 } toggle;
 
 #ifdef ENABLE_NANORC
@@ -117,6 +132,35 @@ typedef struct rcoption {
  
 #endif /* ENABLE_NANORC */
 
+#ifdef ENABLE_COLOR
+
+#define COLORSTRNUM 16
+
+typedef struct colortype {
+    int fg;			/* fg color */
+    int bg;			/* bg color */
+    int bright;			/* Is this color A_BOLD? */
+    int pairnum;		/* Color pair number used for this fg/bg */
+    char *start;		/* Start (or all) of the regex string */
+    char *end;			/* End of the regex string */
+    struct colortype *next;
+} colortype;
+
+typedef struct exttype {
+    char *val;
+    struct exttype *next;
+} exttype;
+
+typedef struct syntaxtype {
+    char *desc;			/* Name of this syntax type */
+    struct exttype *extensions;	/* List of extensions that this applies to */
+    colortype *color;		/* color struct for this syntax */
+    struct syntaxtype *next;
+} syntaxtype;
+
+#endif /* ENABLE_COLOR */
+
+
 /* Bitwise flags so we can save space (or more correctly, not waste it) */
 
 #define MODIFIED		(1<<0)
@@ -144,9 +188,14 @@ typedef struct rcoption {
 #define MAC_FILE		(1<<22)
 #define SMOOTHSCROLL		(1<<23)
 #define DISABLE_CURPOS		(1<<24)	/* Damn, we still need it */
+#define ALT_KEYPAD		(1<<25)
+#define NO_CONVERT		(1<<26)
 
 /* Control key sequences, changing these would be very very bad */
 
+#ifndef NANO_SMALL
+#  define NANO_CONTROL_SPACE 0
+#endif
 #define NANO_CONTROL_A 1
 #define NANO_CONTROL_B 2
 #define NANO_CONTROL_C 3
@@ -205,9 +254,14 @@ typedef struct rcoption {
 #define NANO_ALT_X 'x'
 #define NANO_ALT_Y 'y'
 #define NANO_ALT_Z 'z'
-#define NANO_ALT_LCARAT ','
-#define NANO_ALT_RCARAT '.'
+#define NANO_ALT_PERIOD '.'
+#define NANO_ALT_COMMA ','
+#define NANO_ALT_LCARAT '<'
+#define NANO_ALT_RCARAT '>'
 #define NANO_ALT_BRACKET ']'
+#ifndef NANO_SMALL
+#  define NANO_ALT_SPACE ' '
+#endif
 
 /* Some semi-changeable keybindings; don't play with unless you're sure you
 know what you're doing */
@@ -253,6 +307,7 @@ know what you're doing */
 #define NANO_FORWARD_KEY	NANO_CONTROL_F
 #define NANO_BACK_KEY		NANO_CONTROL_B
 #define NANO_MARK_KEY		NANO_CONTROL_6
+#define NANO_ALT_MARK_KEY	NANO_ALT_A
 #define NANO_HOME_KEY		NANO_CONTROL_A
 #define NANO_END_KEY		NANO_CONTROL_E
 #define NANO_DELETE_KEY		NANO_CONTROL_D
@@ -263,9 +318,17 @@ know what you're doing */
 #define NANO_FROMSEARCHTOGOTO_KEY NANO_CONTROL_T
 #define NANO_TOFILES_KEY	NANO_CONTROL_T
 #define NANO_APPEND_KEY		NANO_ALT_A
+#define NANO_PREPEND_KEY	NANO_ALT_P
 #define NANO_OPENPREV_KEY	NANO_ALT_LCARAT
 #define NANO_OPENNEXT_KEY	NANO_ALT_RCARAT
+#define NANO_OPENPREV_ALTKEY	NANO_ALT_COMMA
+#define NANO_OPENNEXT_ALTKEY	NANO_ALT_PERIOD
 #define NANO_BRACKET_KEY	NANO_ALT_BRACKET
+#define NANO_EXTCMD_KEY		NANO_CONTROL_X
+#ifndef NANO_SMALL
+#  define NANO_NEXTWORD_KEY	NANO_CONTROL_SPACE
+#  define NANO_PREVWORD_KEY	NANO_ALT_SPACE
+#endif
 
 #define TOGGLE_CONST_KEY	NANO_ALT_C
 #define TOGGLE_AUTOINDENT_KEY	NANO_ALT_I
@@ -282,53 +345,9 @@ know what you're doing */
 #define TOGGLE_DOS_KEY		NANO_ALT_D
 #define TOGGLE_MAC_KEY		NANO_ALT_O
 #define TOGGLE_SMOOTH_KEY	NANO_ALT_S
+#define TOGGLE_NOCONVERT_KEY	NANO_ALT_N
 
-/* Toggle stuff, these static lengths need to go away RSN */
-
-#ifndef HAVE_REGEX_H
-#define NO_REGEX 1
-#else 
-#define NO_REGEX 0
-#endif
-
-#ifdef DISABLE_BROWSER
-#define NO_BROWSER 1
-#else
-#define NO_BROWSER 0
-#endif
-
-#ifdef NANO_SMALL
-#ifdef HAVE_REGEX_H
-#define NO_TOGGLES 3
-#else
-#define NO_TOGGLES 2
-#endif /* HAVE_REGEX_H */
-#else
-#define NO_TOGGLES 0
-#endif /* NANO_SMALL */
-
-#ifdef ENABLE_MULTIBUFFER
-#define MULTI_TOGGLES 3
-#else
-#define MULTI_TOGGLES 0
-#endif
-
-#define WHEREIS_LIST_LEN (8 - NO_REGEX - NO_TOGGLES)
-#define REPLACE_LIST_LEN (8 - NO_REGEX - NO_TOGGLES)
-#define TOGGLE_LEN (14 - NO_REGEX + MULTI_TOGGLES)
-#define WRITEFILE_LIST_LEN (3 - NO_BROWSER)
-#define INSERTFILE_LIST_LEN (2 - NO_BROWSER)
-#define BROWSER_LIST_LEN 4
-#define MAIN_LIST_LEN (27 - NO_REGEX)
 #define MAIN_VISIBLE 12
-#define REPLACE_LIST_2_LEN 3
-#define GOTO_LIST_LEN 3
-#define GOTODIR_LIST_LEN 1
-#define HELP_LIST_LEN 3
-#define SPELL_LIST_LEN 1
-
-
-
 
 #define VIEW 1
 #define NOVIEW 0

nano.spec.in

@@ -0,0 +1,44 @@
+%define name	@PACKAGE@
+%define ver	@VERSION@
+%define rel	1
+
+Summary	: Pico editor clone with enhancements
+Name		: %{name}
+Version		: %{ver}
+Release		: %{rel}
+Copyright	: GPL
+Group		: Console/Editors
+URL		: http://www.nano-editor.org
+Source		: http://www.nano-editor.org/dist/v1.1/%{name}-%{ver}.tar.gz
+BuildRoot	: /var/tmp/%{name}-buildroot
+Requires	: ncurses
+
+%description
+GNU nano is a small and friendly text editor.  It aims to emulate the Pico
+text editor while also offering a few enhancements.
+
+%prep
+%setup -q
+
+%build
+%configure --enable-extra
+make RPM_OPT_FLAGS="$RPM_OPT_FLAGS"
+
+%install
+rm -rf "$RPM_BUILD_ROOT"
+make DESTDIR="$RPM_BUILD_ROOT" install
+
+%files
+%defattr(-,root,root)
+%doc AUTHORS BUGS COPYING ChangeLog INSTALL NEWS README THANKS TODO nanorc.sample
+%{_bindir}/nano
+%{_mandir}/*/*
+%{_datadir}/locale/*/LC_MESSAGES/nano.mo
+%{_infodir}/nano.info*
+
+%changelog
+* Sat Mar 30 2002 Chris Allegretta <chrisa@asty.org>
+- Accepted into main distribution
+- Added Packager and URL tage from original spec file.
+* Tue Mar 06 2002 Brett Pemberton <generica@email.com>
+- Initial spec-file

nano.texi

@@ -8,8 +8,8 @@
 @c Run `makeinfo' rather than `texinfo-format-buffer'.
 @smallbook
 @set EDITION 0.1
-@set VERSION 1.1.2
-@set UPDATED 3 Oct 2001
+@set VERSION 1.1.9
+@set UPDATED 4 Jan 2002
 
 @dircategory Editors
 @direntry
@@ -23,7 +23,7 @@
 @titlepage
 @title GNU @code{nano}
 @subtitle a small and friendly text editor.
-@subtitle version 1.1.2
+@subtitle version 1.1.9
 
 @author Chris Allegretta
 @page
@@ -33,7 +33,7 @@ editor.
 
 This manual is part of the GNU @code{nano} distribution.@*
 @sp4
-Copyright (C) 1999, 2000, 2001 Chris Allegretta.
+Copyright (C) 1999, 2000, 2001, 2002 Chris Allegretta.
 
 Permission is granted to make and distribute verbatim copies of
 this manual provided the copyright notice and this permission notice
@@ -114,9 +114,20 @@ Write file in DOS format.
 @item -F, --multibuffer
 Enable multiple file buffers.
 
+@item -K, --keypad
+Do not use the ncurses keypad() call unless necessary.  Try this flag if
+you find that the arrow keys on the numeric keypad do not work for you
+under nano.
+
 @item -M, --mac
 Write file in Mac format.
 
+@item -N, --noconvert
+Do not convert files from DOS/Mac format.
+
+@item -Q [str], --quotestr [str]
+Set the quoting string for justifying.  The default is "> ".
+
 @item -R, --regexp
 Turns on regular expression search and search/replace.
 

nanorc.sample

@@ -1,6 +1,8 @@
 # Sample initialization file for GNU nano
 # Please note that you must have configured nano with 
 # --enable-nanorc for this file to be read!
+#
+# To make sure a value is not enabled, use "unset <option>"
 
 # Use regular expressions by default 
 # set regexp 
@@ -8,6 +10,9 @@
 # Constantly update the cursor position
 # set const
 
+# Show column position relative to the current line, not the whole file
+# set relative
+
 # Use cut to end of line with ^K by default
 # set cut
 
@@ -27,7 +32,7 @@
 # set fill -8
 
 # Use this tab size instead of the default
-# set tabsize 8
+# set tabsize 4
 
 # Use this spelling checker instead of the default one
 # set speller aspell
@@ -50,8 +55,52 @@
 # Use smooth scrolling as the default
 # set smooth
 
+# Use alternate keypad routines
+# set keypad
+
+# Don't convert files from DOS/Mac format
+# set noconvert
+
 # Allow multiple file buffers (using ^R inserts into separate buffer)
 # You must have configured with --enable-multibuffer or --enable-extra for
 # this to work
 #
 # set multibuffer
+
+# Use this as the quoting string.  You shouldn't need to change this,
+# but...... default "> "
+# set quotestr "// "
+
+#
+# Color setup
+# Format: 
+# syntax "short description" ["filename regex" ...]
+# color foreground,background "regex" ["regex"...]
+#
+# Legal colors are: white, black, red, blue, green, yellow, purple, cyan
+# You may use the prefix "bright" to mean a stronger color highlight
+#
+# To use multi-line regexes use the start="regex" end="regex" format.
+#
+# If your system supports transparency, not specifying a background
+# color will use a transparent color.  If you don't want this, be sure
+# to set the background color to black or white.
+#
+# syntax "c-file" ".*\.c" ".*\.h"
+# color brightred "float " "char " "int " "void "  "NULL" "[A-Z_]\{2,\}" 
+# color brightred "static" "const" "[\ ]struct" "^struct" "if " "while[\ \n\(]" 
+# color brightred "do[\ \n\(]" "else[\ \n]" "case " "switch " "break;"
+# color brightcyan "#define" "#include" "#ifn*def" "#endif" "#elif" "#else" "#if "
+
+# You will in general want your comments and strings to come last, becase
+# syntax highlighting rules will be applied in the order they are read in
+
+# color brightyellow "<.*[^=\ ]*>" "\".*\""
+# color brightblue "//.*"
+# color brightblue start="/\*.*" end="\*/"
+
+# For this you will probably want to set your editor to "nano -Y mutt"
+#
+# syntax "mutt"
+# color green "^>.*"
+

po/.cvsignore

@@ -5,4 +5,5 @@ POTFILES
 *.pot
 cat-id*
 messages
+messages.mo
 stamp-cat*

po/ChangeLog

@@ -1 +1,199 @@
+2002-05-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-05-05  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-04-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+
+2002-04-19  Jordi Mallach  <jordi@sindominio.net>
+
+	* ru.po: Updated translation by Sergey A. Ribalchenko.
+	* uk.po: Updated translation by Sergey A. Ribalchenko.
+
+2002-04-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* it.po: Updated translation by Marco Colombo.
+
+2002-04-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* nl.po: Updated translation by Guus Sliepen.
+
+2002-04-10  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-04-05  Jordi Mallach  <jordi@sindominio.net>
+
+	* gl.po: Updated translation by Jacobo Tarrio.
+	* de.po: Updated translation by Michael Piefel.
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-03-29  Jordi Mallach  <jordi@sindominio.net>
+
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-03-27  Jordi Mallach  <jordi@sindominio.net>
+
+	* it.po: Updated translation by Marco Colombo.
+
+2002-03-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+
+2002-03-17  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-03-15  Jordi Mallach  <jordi@sindominio.net>
+
+	* pl.po: Updated translation by Wojciech Kotwica.
+
+2002-03-14  Jordi Mallach  <jordi@sindominio.net>
+
+	* uk.po, ru.po: Updated translations by Sergey A.
+	Ribalchenko.
+
+2002-03-12  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated to current CVS.
+	* es.po: Updated to current CVS.
+	* gl.po: Updated translation to current CVS by Jacobo Tarrio.
+
+2002-03-12  Jordi Mallach  <jordi@sindominio.net>
+
+	* gl.po: Updated translation by Jacobo Tarrio.
+
+2002-03-11  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-03-09  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-03-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+	* de.po: Updated translation by Michael Piefel.
+
+2002-03-05  Jordi Mallach  <jordi@sindominio.net>
+
+	* pl.po: Updated translation by Wojciech Kotwica.
+
+2002-02-20  Jordi Mallach  <jordi@sindominio.net>
+
+	* nl.po: Updated translation by Guus Sliepen.
+
+2002-02-15  Jordi Mallach  <jordi@sindominio.net>
+
+	* nb.po: Updated translation by Stig E Sandoe.
+
+2002-02-15  Jordi Mallach  <jordi@sindominio.net>
+
+	* nb.po: Updated translation by Stig E Sandoe.
+
+2002-02-14  Jordi Mallach  <jordi@sindominio.net>
+
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-02-10  Jordi Mallach  <jordi@sindominio.net>
+
+	* hu.po: Updated translation by Gergely Nagy.
+
+2002-02-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* uk.po, ru.po: Updated translations by Sergey A.
+	Ribalchenko.
+
+2002-02-06  Jordi Mallach  <jordi@sindominio.net>
+
+	* hu.po: Updated translation by Gergely Nagy.
+
+2002-02-06  Jordi Mallach  <jordi@sindominio.net>
+
+	* cs.po: Incomplete update by Václav Haisman.
+
+2002-01-27  Jordi Mallach  <jordi@sindominio.net>
+
+	* it.po: Updated translation by Marco Colombo.
+
+2002-01-26  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+	* nn.po: Updated translation by Kjetil Torgrim Homme.
+	* de.po: Updated translation by Michael Piefel.
+
+2002-01-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-01-23  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-01-19  gettextize  <bug-gnu-utils@gnu.org>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+	* cat-id-tbl.c: Remove file.
+	* stamp-cat-id: Remove file.
+
+2002-01-19  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-01-19  Jordi Mallach  <jordi@sindominio.net>
+
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-01-17  Jordi Mallach  <jordi@sindominio.net>
+
+	* no.po: Removed, replaced by nn.po.
+	* nn.po: Updated translation by Kjetil Torgrim Homme.
+	* nb.po: New Norwegian bokmål translation by Stig E Sandoe.
+
+2002-01-12  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-10  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-08  Jordi Mallach  <jordi@sindominio.net>
+
+	* ru.po, uk.po: Updated translations by Sergey A.
+	Ribalchenko.
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* de.po: Updated translation by Michael Piefel.
+
+2002-01-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-01-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+
 $Id$