GNU nano 1.1.12 release

git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@1308 35c25a1d-7b9e-4130-9fde-d3aeb78583b8

.cvsignore

@@ -1,10 +1,23 @@
 Makefile
 Makefile.in
+aclocal.m4
+autom4te.cache
 confdefs.h
 config.cache
 config.h
+config.h.in
 config.log
 config.status
 configure
+config.guess
+config.sub
+depcomp
+install-sh
+missing
+mkinstalldirs
 nano
+nano.info
+nano.spec
 stamp-h
+stamp-h.in
+stamp-h1

ABOUT-NLS

@@ -8,7 +8,7 @@ A few packages already provide translations for their messages.
 
    If you found this `ABOUT-NLS' file inside a distribution, you may
 assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site.  But you do *not*
+itself available at your nearest GNU archive site.  But you do _not_
 need to install GNU `gettext' prior to configuring, installing or using
 this package with messages translated.
 
@@ -22,8 +22,8 @@ related to internationalization, you should tell about the version of
 `gettext' which is used.  The information can be found in the
 `intl/VERSION' file, in internationalized packages.
 
-One advise in advance
-=====================
+Quick configuration advice
+==========================
 
    If you want to exploit the full power of internationalization, you
 should configure it using
@@ -34,13 +34,14 @@ to force usage of internationalizing routines provided within this
 package, despite the existence of internationalizing capabilities in the
 operating system where this package is being installed.  So far, only
 the `gettext' implementation in the GNU C library version 2 provides as
-many features (such as locale alias or message inheritance) as the
-implementation here.  It is also not possible to offer this additional
-functionality on top of a `catgets' implementation.  Future versions of
-GNU `gettext' will very likely convey even more functionality.  So it
-might be a good idea to change to GNU `gettext' as soon as possible.
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation.  Future versions of GNU `gettext' will
+very likely convey even more functionality.  So it might be a good idea
+to change to GNU `gettext' as soon as possible.
 
-   So you need not provide this option if you are using GNU libc 2 or
+   So you need _not_ provide this option if you are using GNU libc 2 or
 you have installed a recent copy of the GNU gettext package with the
 included `libintl'.
 
@@ -53,23 +54,20 @@ Most such packages use GNU `gettext'.  Other packages have their own
 ways to internationalization, predating GNU `gettext'.
 
    By default, this package will be installed to allow translation of
-messages.  It will automatically detect whether the system provides
-usable `catgets' (if using this is selected by the installer) or
-`gettext' functions.  If neither is available, the GNU `gettext' own
+messages.  It will automatically detect whether the system already
+provides the GNU `gettext' functions.  If not, the GNU `gettext' own
 library will be used.  This library is wholly contained within this
 package, usually in the `intl/' subdirectory, so prior installation of
-the GNU `gettext' package is *not* required.  Installers may use
+the GNU `gettext' package is _not_ required.  Installers may use
 special options at configuration time for changing the default
 behaviour.  The commands:
 
      ./configure --with-included-gettext
-     ./configure --with-catgets
      ./configure --disable-nls
 
-will respectively bypass any pre-existing `catgets' or `gettext' to use
-the internationalizing routines provided within this package, enable
-the use of the `catgets' functions (if found on the locale system), or
-else, *totally* disable translation of messages.
+will respectively bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
 
    When you already have GNU `gettext' installed on your system and run
 configure without an option for your new package, `configure' will
@@ -83,18 +81,10 @@ package is more recent, you should use
 
 to prevent auto-detection.
 
-   By default the configuration process will not test for the `catgets'
-function and therefore they will not be used.  The reasons are already
-given above: the emulation on top of `catgets' cannot provide all the
-extensions provided by the GNU `gettext' library.  If you nevertheless
-want to use the `catgets' functions use
-
-     ./configure --with-catgets
-
-to enable the test for `catgets' (this causes no harm if `catgets' is
-not available on your system).  If you really select this option we
-would like to hear about the reasons because we cannot think of any
-good one ourself.
+   The configuration process will not test for the `catgets' function
+and therefore it will not be used.  The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
 
    Internationalized packages have usually many `po/LL.po' files, where
 LL gives an ISO 639 two-letter code identifying the language.  Unless
@@ -110,22 +100,42 @@ Using This Package
 
    As a user, if your language has been installed for this package, you
 only have to set the `LANG' environment variable to the appropriate
-ISO 639 `LL' two-letter code prior to using the programs in the
-package.  For example, let's suppose that you speak German.  At the
-shell prompt, merely execute `setenv LANG de' (in `csh'),
-`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash').  This
-can be done from your `.login' or `.profile' file, once and for all.
+`LL_CC' combination.  Here `LL' is an ISO 639 two-letter language code,
+and `CC' is an ISO 3166 two-letter country code.  For example, let's
+suppose that you speak German and live in Germany.  At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
 
-   An operating system might already offer message localization for
-many of its programs, while other programs have been installed locally
-with the full capabilities of GNU `gettext'.  Just using `gettext'
-extended syntax for `LANG' would break proper localization of already
-available operating system programs.  In this case, users should set
-both `LANGUAGE' and `LANG' variables in their environment, as programs
-using GNU `gettext' give preference to `LANGUAGE'.  For example, some
-Swedish users would rather read translations in German than English for
-when Swedish is not available.  This is easily accomplished by setting
-`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'.
+   You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries.  For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil.  The
+country code serves to distinguish the dialects.
+
+   The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc.  On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'.  You can get the list of
+locales supported by your system for your country by running the command
+`locale -a | grep '^LL''.
+
+   Not all programs have translations for all languages.  By default, an
+English message is shown in place of a nonexistent translation.  If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'.  GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries.  For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+   In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect.  For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
 
 Translating Teams
 =================
@@ -133,33 +143,21 @@ Translating Teams
    For the Free Translation Project to be a success, we need interested
 people who like their own language and write it well, and who are also
 able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list, courtesy of Linux
-International.  You may reach your translation team at the address
-`LL@li.org', replacing LL by the two-letter ISO 639 code for your
-language.  Language codes are *not* the same as the country codes given
-in ISO 3166.  The following translation teams exist, as of December
-1997:
+Each translation team has its own mailing list.  The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
+area.
 
-     Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en',
-     Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian
-     `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja',
-     Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish
-     `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es',
-     Swedish `sv', and Turkish `tr'.
-
-For example, you may reach the Chinese translation team by writing to
-`zh@li.org'.
-
-   If you'd like to volunteer to *work* at translating messages, you
+   If you'd like to volunteer to _work_ at translating messages, you
 should become a member of the translating team for your own language.
-The subscribing address is *not* the same as the list itself, it has
+The subscribing address is _not_ the same as the list itself, it has
 `-request' appended.  For example, speakers of Swedish can send a
 message to `sv-request@li.org', having this message body:
 
      subscribe
 
    Keep in mind that team members are expected to participate
-*actively* in translations, or at solving translational difficulties,
+_actively_ in translations, or at solving translational difficulties,
 rather than merely lurking around.  If your team does not exist yet and
 you want to start one, or if you are unsure about what to do or how to
 get started, please write to `translation@iro.umontreal.ca' to reach the
@@ -173,42 +171,232 @@ Available Packages
 ==================
 
    Languages are not equally supported in all packages.  The following
-matrix shows the current state of internationalization, as of December
-1997.  The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination.
+matrix shows the current state of internationalization, as of August
+2002.  The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
 
-     Ready PO files    cs da de en es fi fr it ja ko nl no pl pt ru sl sv
-                     .----------------------------------------------------.
-     bash            |       []          []          []                   |  3
-     bison           |       []          []          []                   |  3
-     clisp           |       [] [] []    []                               |  4
-     cpio            |       []    []    []       [] []    []             |  6
-     diffutils       |       []    []    []                []          [] |  5
-     enscript        |       []    [] [] []          []             []    |  6
-     fileutils       | []    []    []    []       [] []    [] []    [] [] | 10
-     findutils       |       []    []    [] []    [] []    []    []    [] |  9
-     flex            |             []    []       []                   [] |  4
-     gcal            |       []          []          []    []          [] |  5
-     gettext         |    [] []    []    []       [] [] [] [] []    [] [] | 12
-     grep            |       []    []    []       [] [] [] []    [] [] [] | 10
-     hello           |    [] []    []    []       [] [] [] [] []    [] [] | 11
-     id-utils        |       []          []                []             |  3
-     indent          |    [] []                   []       []    []       |  5
-     libc            |       []    []    []       [] []    []          [] |  7
-     m4              |       []          []    []    []          []    [] |  6
-     make            |       []    []    []       [] []    []             |  6
-     music           |                   []                []             |  2
-     ptx             |       []    []    []          [] [] [] []       [] |  8
-     recode          |    [] []    []    []          []    [] []    [] [] |  9
-     sh-utils        |       []    []    []          [] [] [] []       [] |  8
-     sharutils       | []    []    []    []          []                [] |  6
-     tar             | []    []          [] []    [] [] [] [] []    [] [] | 11
-     texinfo         | []    []          []                               |  3
-     textutils       | []    []    []    []       [] [] [] []          [] |  9
-     wdiff           | []    []    []    []          [] [] []          [] |  8
-                     `----------------------------------------------------'
-       17 languages    cs da de en es fi fr it ja ko nl no pl pt ru sl sv
-       27 packages      6  4 25  1 18  1 26  2  1 12 20  9 19  7  4  7 17  179
+     Ready PO files    be bg ca cs da de el en eo es et fi fr
+                     +----------------------------------------+
+     a2ps            |             [] []             []    [] |
+     ap-utils        |                                        |
+     bash            |                []       [] []       [] |
+     bfd             |                            []       [] |
+     binutils        |                            []       [] |
+     bison           |                []          [] []    [] |
+     clisp           |                                        |
+     clisp           |                []    []    []       [] |
+     clisplow        |                                        |
+     cpio            |             [] []          []       [] |
+     darkstat        |             ()                         |
+     diffutils       |          [] [] []       [] []       [] |
+     enscript        |                []                   [] |
+     error           |                []          []       [] |
+     fetchmail       |       [] () [] []          []       () |
+     fileutils       |             [] []          [] []    [] |
+     findutils       |             [] []       [] [] []    [] |
+     flex            |       []    [] []          []       [] |
+     gas             |                            []       [] |
+     gawk            |                []          []       [] |
+     gcal            |       []                            [] |
+     gcc             |                            []       [] |
+     gettext         |       []    [] []          []       [] |
+     gnupg           |       []       [] []    [] [] []    [] |
+     gprof           |                            []       [] |
+     gpsdrive        |             () ()    ()    ()       () |
+     grep            |    [] []       [] []       [] [] [] [] |
+     gretl           |                            []          |
+     gthumb          |                ()          ()       () |
+     hello           |       []    [] [] []    [] [] [] [] [] |
+     id-utils        |             [] []                   [] |
+     indent          |       []       []       []    []    [] |
+     jpilot          |          () [] []                   [] |
+     jwhois          |                            []       [] |
+     kbd             |                []          []       [] |
+     ld              |                            []       [] |
+     libc            |       [] [] [] [] []       []    [] [] |
+     libiconv        |       []       []       [] []          |
+     lifelines       |                ()                   () |
+     lilypond        |             []                      [] |
+     lingoteach      |                         []          [] |
+     lingoteach_lessons|                ()          ()          |
+     lynx            |       [] [] [] []             []       |
+     m4              |          [] [] [] []                [] |
+     make            |             [] []          []       [] |
+     man-db          |       [] () () []          ()       () |
+     mysecretdiary   |                []          []       [] |
+     nano            |       [] () [] []          []       [] |
+     nano_1_0        |       [] () [] []          []       [] |
+     opcodes         |             []             []       [] |
+     parted          |       []    [] []          []       [] |
+     ptx             |             [] []       [] [] [] [] [] |
+     python          |                                        |
+     recode          |             [] [] []    [] []       [] |
+     sed             |       [] [] [] [] []    [] [] [] [] [] |
+     sh-utils        |                []          [] []    [] |
+     sharutils       |          [] [] [] []       [] []    [] |
+     sketch          |                ()          []       () |
+     soundtracker    |                []          []       [] |
+     sp              |                []                      |
+     tar             |          [] [] []          [] []    [] |
+     texinfo         |          [] [] []       []          [] |
+     textutils       |       []    [] []          []       [] |
+     util-linux      |          [] [] []          [] []    [] |
+     vorbis-tools    |                                     [] |
+     wastesedge      |                                        |
+     wdiff           |       []    [] []          [] []    [] |
+     wget            |    [] [] [] [] [] []       [] [] [] [] |
+                     +----------------------------------------+
+                       be bg ca cs da de el en eo es et fi fr
+                        0  2 19 10 30 44  9  1 12 44 17  6 53
+     
+                       gl he hr hu id it ja ko lv nb nl nn
+                     +-------------------------------------+
+     a2ps            |                ()    ()       []    |
+     ap-utils        |                                     |
+     bash            |          []                         |
+     bfd             |                   []                |
+     binutils        |                   []                |
+     bison           |       []       [] []          []    |
+     clisp           |                                     |
+     clisp           |                               []    |
+     clisplow        |                                     |
+     cpio            | []       []          []       []    |
+     darkstat        |                                     |
+     diffutils       | [] []    [] []    []                |
+     enscript        |       []                      []    |
+     error           |          []                         |
+     fetchmail       |                   []                |
+     fileutils       |          []    [] []                |
+     findutils       | []    [] [] [] [] [] []       []    |
+     flex            |                      []             |
+     gas             |                                     |
+     gawk            |    []                               |
+     gcal            |                                     |
+     gcc             |                   []                |
+     gettext         |                   [] []             |
+     gnupg           | []          [] [] []                |
+     gprof           |             []                      |
+     gpsdrive        |          []    ()             ()    |
+     grep            | [] [] [] [] [] [] []                |
+     gretl           |                                     |
+     gthumb          |                () ()                |
+     hello           | [] [] [] [] [] [] [] [] [] [] [] [] |
+     id-utils        |          []                   []    |
+     indent          | []       []       []          []    |
+     jpilot          |                   ()          ()    |
+     jwhois          |          [] []                      |
+     kbd             |                                     |
+     ld              |                                     |
+     libc            | []                [] []    []       |
+     libiconv        | []    [] []                         |
+     lifelines       |                                     |
+     lilypond        |                               []    |
+     lingoteach      |          []                         |
+     lingoteach_lessons|                                     |
+     lynx            |          []    [] []          []    |
+     m4              | []          []    []          []    |
+     make            | [] [] []          [] []       []    |
+     man-db          |                () ()                |
+     mysecretdiary   |             []                      |
+     nano            | []          [] []             []    |
+     nano_1_0        | []          [] []          []    [] |
+     opcodes         |             []                []    |
+     parted          | []                []             [] |
+     ptx             | []       [] []             [] []    |
+     python          |                                     |
+     recode          | [] []          []                   |
+     sed             | [] [] []    [] [] [] []       []    |
+     sh-utils        |                [] []       []       |
+     sharutils       | []                []          []    |
+     sketch          |                ()                   |
+     soundtracker    | []    []                            |
+     sp              |                                     |
+     tar             | []    []    [] [] []       []       |
+     texinfo         |    [] []          []                |
+     textutils       | []                [] []    []       |
+     util-linux      |                () []                |
+     vorbis-tools    |          []                         |
+     wastesedge      |                                     |
+     wdiff           | []       [] []                      |
+     wget            | [] [] [] []       []          []    |
+                     +-------------------------------------+
+                       gl he hr hu id it ja ko lv nb nl nn
+                       23  9 12 19 16 13 26  9  1  7 19  3
+     
+                       no pl pt pt_BR ru sk sl sv tr uk zh_CN zh_TW
+                     +----------------------------------------------+
+     a2ps            | () () ()  []   []    [] [] []                | 10
+     ap-utils        |                               ()             |  0
+     bash            |           []                                 |  6
+     bfd             |                         [] []                |  5
+     binutils        |                         [] []                |  5
+     bison           |           []   []       [] []                | 12
+     clisp           |                                              |  0
+     clisp           |                                              |  5
+     clisplow        |                                              |  0
+     cpio            |    []     []   []       []                   | 12
+     darkstat        |           []            []        ()    ()   |  2
+     diffutils       |    []     []   []       [] []           []   | 17
+     enscript        |           []   []       [] []                |  8
+     error           |                   []       []           []   |  7
+     fetchmail       |    ()     ()               []                |  6
+     fileutils       |                []    [] [] []     []    []   | 14
+     findutils       |    []     []   [] [] [] [] []                | 21
+     flex            |                []       [] []                |  9
+     gas             |                            []                |  3
+     gawk            |                         [] []                |  6
+     gcal            |                         [] []                |  4
+     gcc             |                            []                |  4
+     gettext         |                [] [] [] [] []           []   | 13
+     gnupg           |    []                   [] []                | 14
+     gprof           |                         [] []                |  5
+     gpsdrive        |                   []    []                   |  3
+     grep            |    []     []   []    []    []                | 20
+     gretl           |                                              |  1
+     gthumb          |           ()   ()       []                   |  1
+     hello           | [] []          [] []    [] [] []             | 28
+     id-utils        |           []   []       [] []                |  9
+     indent          |           []   [] []    [] []                | 14
+     jpilot          | ()                      () []           []   |  5
+     jwhois          |           []   ()       () []           []   |  7
+     kbd             |                         [] []                |  5
+     ld              |                         [] []                |  4
+     libc            | [] []     []      []    [] []                | 18
+     libiconv        |           []   [] []    [] []                | 12
+     lifelines       |                         []                   |  1
+     lilypond        |                         []                   |  4
+     lingoteach      |           []            []                   |  5
+     lingoteach_lessons|                                   ()         |  0
+     lynx            |           []   []       [] []                | 13
+     m4              |    []     []   []       []                   | 13
+     make            |    []     []   []       [] []                | 15
+     man-db          |                                              |  3
+     mysecretdiary   |           []            [] []                |  7
+     nano            |    []          []       []    []             | 13
+     nano_1_0        |    []          []       []    []             | 14
+     opcodes         |           []            [] []                |  8
+     parted          |       []  []            [] []                | 12
+     ptx             | [] [] []  []   []       [] []                | 19
+     python          |                                              |  0
+     recode          |    []     []   []    [] [] []                | 15
+     sed             |           []   [] [] [] [] []                | 24
+     sh-utils        |                []          []                |  9
+     sharutils       |                []       [] []           []   | 14
+     sketch          |           []   ()       []                   |  4
+     soundtracker    |                         []                   |  6
+     sp              |                                              |  1
+     tar             | [] []     []      [] [] [] []                | 19
+     texinfo         |                []       []                   | 10
+     textutils       |                []    [] [] []           []   | 14
+     util-linux      |           []            [] []                | 10
+     vorbis-tools    |                         []                   |  3
+     wastesedge      |                                              |  0
+     wdiff           |           []   [] []    [] []                | 14
+     wget            |    []          [] [] [] [] [] []        []   | 24
+                     +----------------------------------------------+
+       37 teams        no pl pt pt_BR ru sk sl sv tr uk zh_CN zh_TW
+       68 domains       4 15  2  28   28 12 10 49 43  4   1     9    609
 
    Some counters in the preceding matrix are higher than the number of
 visible blocks let us expect.  This is because a few extra PO files are
@@ -221,7 +409,27 @@ distributed as such by its maintainer.  There might be an observable
 lag between the mere existence a PO file and its wide availability in a
 distribution.
 
-   If December 1997 seems to be old, you may fetch a more recent copy
-of this `ABOUT-NLS' file on most GNU archive sites.
+   If August 2002 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites.  The most up-to-date
+matrix with full percentage details can be found at
+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
+
+Using `gettext' in new packages
+===============================
+
+   If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package.  Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library.  This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+   Once the sources are changed appropriately and the setup can handle
+to use of `gettext' the only thing missing are the translations.  The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project.  Therefore the information given above
+applies also for every other Free Software Project.  Contact
+`translation@iro.umontreal.ca' to make the `.pot' files available to
+the translation teams.
 
-$Id$

AUTHORS

@@ -24,3 +24,12 @@ Rocco Corsi <rocco.corsi@sympatico.ca>
 	* Internal spelling code, many optimizations and bug fixes for 
 	  findnextstr and search-related functions, various display and
 	  file handling fixes.
+
+David Lawrence Ramsey <pooka_regent@sluggy.net>
+	* Multiple buffer support, operating dir (-o) option, bug fixes
+	  for display routines, wrapping code, spelling fixes, const
+	  mode and various other fixes.
+
+David Benbennick <dbenbenn@math.cornell.edu>
+	* Wrap and justify bugfixes/enhancements, new color syntax
+	  code, memleak fixes and other miscellaneous fixes.

BUGS

@@ -1,3 +1,6 @@
+** Open BUGS **
+
+** Fixed BUGS **
 - Marked cutting sometimes leaves a newline in the file unintelligently,
   such as when all of a line is selected but the mark doesn't proceed to
   the new line. (8) [FIXED/IRRELEVANT]
@@ -6,20 +9,20 @@
 - edit_refresh() and update_line() do not handle selecting text when the
   cursor is beyond COLS (10) [FIXED]
 - no way to do a replace with the empty string (11) [FIXED, yay!]
-- Spelling support is not elegant like pico's integration of the 'spell'
+- Spelling support is not elegant like Pico's integration of the 'spell'
   program.  Nano only uses ispell (for now) (12) [FIXED]
 - Moving to the end of a line when close to a multiple of COLS and at
   least COLS * 2 does not make the screen jump early like it would for
   if we were around COLS (bugs in edit_refresh, update_line) (13)
   [FIXED, mostly]
-- When at the very bottom of the edit window, do_wrap goes berzerk and
-  puts the curor somewhere bad, subsequent keystrokes crash the program
+- When at the very bottom of the edit window, do_wrap goes berserk and
+  puts the cursor somewhere bad; subsequent keystrokes crash the program
   (14) [FIXED, mostly]
 - Doing a replacement of a substring of the replace string (e.g. replacing
-  "ed" with "fred" causes an infinite loop. (15) [FIXED]
+  "ed" with "fred" causes an infinite loop). (15) [FIXED]
 - Cutting a file with marked text and both marker ends on the same line
   causes a random segfault (16) [FIXED]
-- Cutting more than one line resets the KEEP_CUTBUFFER flag in 0.9.3
+- Cutting more than one line resets the KEEP_CUTBUFFER flag in 0.9.3.
   Error is in bitwise assignment (nano.h). (17) [FIXED]
 - The wrapping code does not work right for lines like the following:
  *                                                                     *
@@ -27,9 +30,10 @@
 - Nano fails to follow symlinks, even though -l isn't being used (20).
   [Bug in global flag init, FIXED]
 - When using --help or --version, the SIGINT character gets lost. (21) [FIXED]
-- edit_refresh() and update_line() (and related functions), have 
-  trouble when a tab is the character that is the boundry at COLS (23) [FIXED]
-- there is an off-by-one error in keeping track of totsize.  It is caused
+- edit_refresh() and update_line() (and related functions) have 
+  trouble when a tab is the character that is the boundary at COLS (23)
+  [FIXED]
+- There is an off-by-one error in keeping track of totsize.  It is caused
   by the fact that we count the newline at the end when we read in a file
   but we do not, in fact, display this newline.  This should go away
   implicitly when the "Magic Line" returns, but it is noted here for
@@ -41,50 +45,52 @@
   a dialog about not being able to write the file, and it will not let the
   user exit (29, discovered by Joshua Jensen) [FIXED]
 - Using nano -k, marked text is not cut properly. (31) [FIXED]
-- Invoking -t or -k has the effect of invoking both option. (32) [FIXED]
+- Invoking -t or -k has the effect of invoking both options. (32) [FIXED]
 - totsize becomes incorrect after word-wrapping (25) [FIXED]
-- Wrapping a line with autoindent mode sometimes causes a segfault (19)[FIXED]
+- Wrapping a line with autoindent mode sometimes causes a segfault (19)
+  [FIXED]
 - When inserting files, the display sometimes fails to display properly
-  until a pageup/down occurs (22)[FIXED]
-- In search/replace code there is too much refreshing in bottomwin (26)
- [FIXED]
+  until a pageup/down occurs (22) [FIXED]
+- In search/replace code, there is too much refreshing in bottomwin (26)
+  [FIXED]
 - In replace, there is no way to accept the default replace string. (27)
- [FIXED]
+  [FIXED]
 - Using nano -t, user can not exit until a filename is given via ^O. (30)
- [FIXED]
+  [FIXED]
 - totsize problems still abound in do_justify (33) [FIXED]
-- Using -k cut text is not pasted properly. (34) [FIXED].
-- Using -k pasted text is not updated properly if it goes beyond editbot. (35)
- [FIXED]
-- Doing a cut with -k can screw up the filestruct, fault is in cutting
+- Using -k, cut text is not pasted properly. (34) [FIXED].
+- Using -k, pasted text is not updated properly if it goes beyond editbot. (35)
+  [FIXED]
+- Doing a cut with -k can screw up the filestruct; fault is in cutting
  code. (36)  [FIXED]
 - Hitting enter on the magic line makes new lines, but they are not
   written out to disk when saved..... (37). [FIXED]
-- Page up and page down do not work the same way as Pico (# of lines). (38)
- [FIXED]
+- Page up and page down do not work the same way as in Pico (# of lines). (38)
+  [FIXED]
 - When doing a search and the marker is set, the screen does not always
   properly update the inverted text (39). [FIXED]
-- Searches for a string that only exist on one line multiple times will
-  fail after finding the last occurance (discovered by Ken Tyler) (40). [FIXED]
-- Alt-Z is current broken to toggle suspend.  I guess I still don't know
+- Searches for a string that only exists on one line multiple times will
+  fail after finding the last occurrence (discovered by Ken Tyler) (40).
+  [FIXED]
+- Alt-Z is currently broken to toggle suspend.  I guess I still don't know
   signals very well =-) (41) [FIXED].
-- Unable to cut the entire file using the marker (discovered by Kev Tyler)
+- Unable to cut the entire file using the marker (discovered by Ken Tyler)
   (42). [FIXED]
 - The keypad does not work when nano runs in the Gnome terminal (43). [FIXED]
-- When reading in a file, if the file is a directory the contents of the
+- When reading in a file, if the file is a directory, the contents of the
   file being edited are blown away (discovered by  Chris Pimlot) (44). [FIXED]
 - in certain terms, nano will leave a "ghost" of screen upon exit
   when called from inside mutt (among other settings) (45). [FIXED]
 - In replace, hitting the Goto line shortcut key does nothing after a
   search string is entered (discovered by Rocco Corsi) (46) [FIXED].
-- When typing in a string in serahc or replace and hitting CASE_SENSITVE
+- When typing in a string in search or replace and hitting CASE_SENSITIVE
   or the other search string, the current string edit is blown away in
   favor of the last stored search (47) [FIXED]
-- If nano fails to open a file when it starts up,doing almost anything
+- If nano fails to open a file when it starts up, doing almost anything
   causes a segfault (discovered by Ben Roberts) (48). [FIXED]
 - In certain terminals, nano would not work properly with keypad().
-  Turned out to be the silly timeout(0) call which is completely
-  unneeded anyway.  (49) [FIXED]
+  Turned out to be the silly timeout(0) call, which is completely
+  unneeded, anyway.  (49) [FIXED]
 - With less than a page of text, doing a page down will move the
   current line to the top of the screen, which it shouldn't do.  (50) 
   [FIXED]
@@ -97,15 +103,37 @@
 - Cut to end cutting (-k) causes segfaults (try cutting "- Backup making
   (filename~)?" line in TODO file) (discovered by
   higuita@cadernoverde.com) (54) [FIXED].
-- When using autoindent (-i), wrapped text does not get auto-indented
+- When using autoindent (-i), wrapped text does not get autoindented
   (55, discovered by Mark Senior) [FIXED].
-- When using -R (regex) and -p (pico mode), subsequent searches after
+- When using -R (regex) and -p (Pico mode), subsequent searches after
   the first fail if no string is entered (56) [FIXED].
 - Page down on a file of editwinrows fails (again). Reported by Ryan
   Krebs (57) [FIXED].
 - File browser aborts on Solaris in qsort() call.  (Reported by
   Matthias Andree) (58) [FIXED].
-
-** Open BUGS **
+- Can modify the current file in view mode with ^W^R (discovered by Rocco
+  Corsi) (58) [FIXED].
+- When page up is used after two page down's, the screen doesn't update
+  properly (discovered by David Lawrence Ramsey) (59) [FIXED].
+- On BSD systems, marked cutting sna paste often screws up the
+  last line in the cutbuffer (discovered by Barry Pederson) (60) [FIXED]
+- Blank lines are not kept when cutting with -k (discovered by Rocco)
+  (61) [FIXED].
+- Nano will not suspend properly inside of mutt (62) [FIXED].
+- When switching from Pico mode to normal mode, the previous search is
+  not displayed until cancelling the search (63) [FIXED].
+- If you change search options but don't change the search string in
+  normal mode, hitting  enter causes the search/replace to abort (64)
+  (Jordi Mallach) [FIXED].
+- Cutting one line of text causes the screen to recenter the line
+  (reported and fixed by David Lawrence Ramsey) (65) [FIXED].
+- When cutting marked text including the bottom of the file, a new   
+  "magic line" is not created" (reported by David Lawrence
+  Ramsey, fixed by David Lawrence Ramsey & Chris) (66) [FIXED].
+- ^C does not work after a suspend in tcsh (discovered by
+  Trevor Cordes) (68) [FIXED].
+- Home and End control keys (^A, ^E) do not always work in filename
+  prompt (bug found by Ian Turner) (69) [1.0 series only] [FIXED].
+- Trying to insert a file of 0 bytes will hang nano (70) [FIXED].
 
 $Id$

Makefile.am

@@ -1,27 +1,36 @@
 ## $Id$
+AUTOMAKE_OPTIONS = gnu no-dependencies
+
+DEFS= -DSYSCONFDIR=\"$(sysconfdir)\"
+
 bin_PROGRAMS = 	nano
-nano_SOURCES =	cut.c \
+nano_SOURCES =	color.c \
+		cut.c \
 		files.c \
 		global.c \
 		move.c \
 		nano.c \
 		nano.h \
 		proto.h \
+		rcfile.c \
 		search.c \
 		utils.c \
 		winio.c 
 
 man_MANS = nano.1
-nano_LDADD = @INTLLIBS@
+nano_LDADD = @GLIB_LIBS@ @LIBINTL@
 
 info_TEXINFOS = nano.texi
 MAKEINFO = makeinfo --no-split
 
-EXTRA_DIST =	AUTHORS BUGS COPYING ChangeLog INSTALL NEWS README \
-		TODO install-sh missing mkinstalldirs nano.1 nano.1.html \
-		faq.html
+EXTRA_DIST =	ABOUT-NLS AUTHORS BUGS COPYING ChangeLog INSTALL NEWS \
+		README THANKS TODO config.rpath install-sh missing \
+		mkinstalldirs nano.1 nano.1.html faq.html nanorc.sample \
+		nano.spec
 
-SUBDIRS = po intl
+SUBDIRS = po m4
 
 localedir = $(datadir)/locale
 INCLUDES = -Iintl -DLOCALEDIR=\"$(localedir)\" -I@includedir@
+
+ACLOCAL_AMFLAGS = -I m4

Makefile.in

@@ -1,635 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CURSES_LIB = @CURSES_LIB@
-DATADIRNAME = @DATADIRNAME@
-GENCAT = @GENCAT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_CONFIG = @GLIB_CONFIG@
-GLIB_LIBS = @GLIB_LIBS@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
-INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-l = @l@
-
-bin_PROGRAMS = nano
-nano_SOURCES = cut.c 		files.c 		global.c 		move.c 		nano.c 		nano.h 		proto.h 		search.c 		utils.c 		winio.c 
-
-
-man_MANS = nano.1
-nano_LDADD = @INTLLIBS@
-
-info_TEXINFOS = nano.texi
-MAKEINFO = makeinfo --no-split
-
-EXTRA_DIST = AUTHORS BUGS COPYING ChangeLog INSTALL NEWS README 		TODO install-sh missing mkinstalldirs nano.1 nano.1.html 		faq.html
-
-
-SUBDIRS = po intl
-
-localedir = $(datadir)/locale
-INCLUDES = -Iintl -DLOCALEDIR=\"$(localedir)\" -I@includedir@
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = 
-PROGRAMS =  $(bin_PROGRAMS)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I.
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-nano_OBJECTS =  cut.o files.o global.o move.o nano.o search.o utils.o \
-winio.o
-nano_DEPENDENCIES = 
-nano_LDFLAGS = 
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = texi2dvi
-INFO_DEPS = nano.info
-DVIS = nano.dvi
-TEXINFOS = nano.texi
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
-
-NROFF = nroff
-DIST_COMMON =  README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
-INSTALL Makefile.am Makefile.in NEWS TODO acconfig.h aclocal.m4 \
-config.h.in configure configure.in install-sh missing mkinstalldirs \
-texinfo.tex
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-SOURCES = $(nano_SOURCES)
-OBJECTS = $(nano_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4):  configure.in 
-	cd $(srcdir) && $(ACLOCAL)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-config.h: stamp-h
-	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
-	else :; fi
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=config.h:config.h.in \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
-	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
-	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
-	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
-	-rm -f config.h
-
-maintainer-clean-hdr:
-
-mostlyclean-binPROGRAMS:
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-distclean-binPROGRAMS:
-
-maintainer-clean-binPROGRAMS:
-
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(bindir)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo "  $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
-	     $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-	  else :; fi; \
-	done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-	done
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-nano: $(nano_OBJECTS) $(nano_DEPENDENCIES)
-	@rm -f nano
-	$(LINK) $(nano_LDFLAGS) $(nano_OBJECTS) $(nano_LDADD) $(LIBS)
-
-nano.info: nano.texi
-nano.dvi: nano.texi
-
-
-DVIPS = dvips
-
-.texi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texi.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.txi.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-.dvi.ps:
-	$(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  d=$(srcdir); \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  list='$(INFO_DEPS)'; \
-	  for file in $$list; do \
-	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
-	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
-	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  test -z "$ii" \
-	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
-	done
-	@$(NORMAL_UNINSTALL)
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
-	done
-
-dist-info: $(INFO_DEPS)
-	list='$(INFO_DEPS)'; \
-	for base in $$list; do \
-	  d=$(srcdir); \
-	  for file in `cd $$d && eval echo $$base*`; do \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -f nano.aux nano.cp nano.cps nano.dvi nano.fn nano.fns nano.ky \
-	  nano.kys nano.ps nano.log nano.pg nano.toc nano.tp nano.tps \
-	  nano.vr nano.vrs nano.op nano.tr nano.cv nano.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
-	cd $(srcdir) && for i in $(INFO_DEPS); do \
-	  rm -f $$i; \
-	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
-	    rm -f $$i-[0-9]*; \
-	  fi; \
-	done
-
-install-man1:
-	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
-	done
-
-uninstall-man1:
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
-	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
-	done
-install-man: $(MANS)
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
-	@$(NORMAL_UNINSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive  \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-info-am: $(INFO_DEPS)
-info: info-recursive
-dvi-am: $(DVIS)
-dvi: dvi-recursive
-check-am: all-am
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am: install-binPROGRAMS
-install-exec: install-exec-recursive
-
-install-data-am: install-info-am install-man
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-binPROGRAMS uninstall-info uninstall-man
-uninstall: uninstall-recursive
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) config.h
-all-redirect: all-recursive-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(infodir) \
-		$(DESTDIR)$(mandir)/man1
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS \
-		mostlyclean-compile mostlyclean-aminfo mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-aminfo \
-		clean-tags clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile \
-		distclean-aminfo distclean-tags distclean-generic \
-		clean-am
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS \
-		maintainer-clean-compile maintainer-clean-aminfo \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
-uninstall-man install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

NEWS

@@ -1,3 +1,191 @@
+10/24/2002 - GNU nano 1.1.12 "Make Jordi happy" is released.  This 
+		release demonstrated that nano is starting to freeze for 
+		version 1.2.  New features include a Meta-Y toggle
+		for syntax highlighting, pluralized i18n, and a handler
+		for SIGTERM.  Nano now ignores XOFF (^S) to stop 
+		accidental lock-ups, and no longer references malloc.h.
+			Also included are fixes for zero-length regex
+		matches, segfaults with --disable-mouse, justification,
+		memory corruption with the browser, version and help 
+		cmdline output, and translation updates.  Aside from 
+		the (currently up in the air) search history behavior, 
+		the next version of nano should be 1.1.99pre1.  Have 
+		fun!
+
+10/01/2002 - GNU nano 1.1.11 "Oddball" is released.  This release 
+		features a new version of gettext, a new and improved syntax 
+		highlighting engine, and some updates for the nanorc.sample
+		file.  The toggles for case sensitivity (Meta-C) and regular 
+		expressions (Meta-R) have changed in the search and replace 
+		prompts, multibuffer status is now displayed and can be 
+		toggled from the insert file menu, and some wrapping behavior 
+		that changed in 1.1.10 has reverted.  The --enable-color
+		warning was also made less severe, as the color syntax code 
+		has improved, and nano now uses extended regexes in the 
+		.nanorc file.
+			Also included are fixes for various memory leaks,
+		the operating directory option, username tab completion,
+		the page_up and down arrow, go to previous word and next
+		word, nanorc parser and line wrapping code.  Have fun!
+		
+
+07/25/2002 - At long last!  GNU nano 1.1.10 "What didn't we break?" is
+		released.  This version of GNU nano features version
+		0.11.2 of gettext, building with automake 1.6, some new
+		code for displaying control characters, browser
+		improvements, a new backup file option (-B, --backup),
+		a new option to ignore rc files (-I,--ignorercfiles), 
+		compatibility with -pedantic, handling null characters
+		before EOF, a slightly sportier nanorc.sample and more.
+			Fixes are included included for justification, the 
+		reading and writing file routines, resizing and fill
+		length, millions of memory leaks, the usage screen was 
+		updated, and the the --quotestr and --regexp really work
+		now ;-)   Enjoy :)
+
+05/12/2002 - GNU nano 1.1.9 is released, happy Mother's Day!  This release
+		includes many new features, including a prepend mode 
+		(^O,M-P), a new "syntax" command in the .nanorc to allow
+		multiple syntax highlighting types, and a new -Y, --syntax  
+		flag to set a specific one if there's no filename regex to 
+		match it against (i.e. w/mutt).  The ^space and M-space keys
+		will now show up in the help menu, which itself has been
+		tweaked a bit, and many more configure options should now
+		cooperate (like the odd pairing of --enable-tiny and 
+		--enable-multibuffer).  The marker should now work
+		when using multiple buffers, and the huge memory leak in
+		color syntax highlighting has been fixed.  A lot of
+		new stuff for everyone's favorite text editor ;)  Have fun!
+
+03/30/2002 - GNU nano 1.1.8 is released.  New features include an 
+		"Insert Output of External Command", ^R^X, and a .spec
+		file is now included in the distribution.  There are 
+		cleanups in the usage code, fixes for regex parsing, 
+		the file browser, the NO_CONVERT auto-detect, indented 
+		justification, the internal spell checker, and a serious 
+		bug where reading a file of 0 lines would hang nano.  
+		Also, the "show position" code now shows the starting 
+		column as 1 instead of 0.  Have fun!
+
+03/05/2002 - GNU nano 1.1.7 "lets change everything and see what breaks"
+		is released.  New features include new flags 
+		-N,--noconvert to stop any file format conversion and
+		-Q, --quotestr for the new quoted text justification,
+		a new tempnam() implementation to avoid silly warnings,
+		DOS and Mac file options in the Write File dialog,
+		multiple save files (file.1) for abnormal exits, ^C
+		now shows column as well as character position, and 
+		multibuffer allows duplicate files, even unnamed ones.
+		Also, the static shortcut and toggle lengths are
+		history, nano now reads $SYSCONFDIR/nanorc if rc file
+		support is enabled, and nano is now built with (and
+		requires for rebuilding) autoconf 2.5. 
+			This release also includes fixes for some memory
+		leaks, detecting DOS and mac file format, justification,
+		suspending keys, search & replace under various 
+		conditions, variable width for shortcuts, and the usual
+		ton of translation updates.
+
+01/25/2002 - GNU nano 1.1.6 is released.  Lots of new features in this
+		release.  New Meta-keys were added as alternates for 
+		control sequences: Meta-A for the marker key (^^), and
+		Meta-G for the 'goto dir' key in the file browser (^_).
+		The color syntax highlighting now supports multiple
+		lines via start="regex" end="regex" syntax, and the
+		.nanorc regex format itself has changed. Also, the
+		gettext code was upgraded to version 0.10.40, and nano
+		will now display a message if only occurrence of a
+		given search exists. 
+			For bugfixes, there are fixes for spelling,
+		stray newlines in the usage() function, suspend issues
+		with tcsh, auto-indent and wrapping clashes, ugly code 
+		in rcfile.c, global variable compatibility with AIX.
+		There are also oodles of translation updates.
+		Have fun with it.
+
+01/05/2002 - GNU nano 1.1.5 is out.  The main new feature in this 
+		release is the changed behavior of the keypad.  Nano now 
+		does the Right Thing and used keypad() by default.  If
+		you wish to use the keypad arrow keys in certain 
+		terminals, you may use the -K or --keypad flag to
+		use the old behavior.  Users of other OSes should see 
+		better handling of their non-keypad keys in this 
+		release.  Other changes include more Hurd fixes, fixes
+		parsing the .nanorc, display fixes for the color syntax
+		highlighting, gettext stabilization and many translation
+		updates.  This is amost like a stable release, much like
+		in the 0.9.x series when every other release was the
+		mosts stable one :)  Have fun!
+		
+12/11/2001 - GNU nano 1.1.4 is released.  This release contains 
+		rudimentary color syntax support (but it's still
+		broken), compatibility fixes for the Hurd and FreeBSD,
+		spell checker and wrapping fixes, and more.  It seems
+		that the amount of interest in the code is inversely
+		proportional to the amount of time since last release,
+		so it's time to show the world all the changes since 
+		1.1.3 ;)  Have fun with it!
+ 
+10/26/2001 - GNU nano 1.1.3 is released.  As far as new features go, 
+		the help system is now available for all functions in the
+		editor.  Also, nano will also now print a message on
+		the status bar when it automatically converts a file from
+		Mac or DOS format, and trying to load a file that
+		has already been loaded in multibuffer mode will now also
+		cause an error message.  There is now a "goto previous
+		word" which you can use by hitting Meta-Space Bar.
+			As for fixes, a SEVERE bug in the 
+		null_at code which discarded the memory address of
+		reallocated memory has been fixed. This is probably
+		the biggest bug fix in well over the last year of
+		development.  There are also some display fixes for when
+		the screen shouldn't center itself on cut or uncut text.
+		Also, the comments in the header files incorectly said
+		that nano was distributed under version 1 of the GPL when
+		the accompanying license was the GPLv2.  
+			If you're using nano-1.1, it is highly
+		recommeneded you upgrade to this release.  If using 1.0,
+		wait for version 1.0.6 which should be available early
+		next week.  Enjoy!
+
+10/03/2001 - GNU nano 1.1.2 is out there.  Many new features in this
+		release, including support for auto-converting from
+		DOS and Mac formatted files, as well as toggles for
+		writing out files in these formats.  Pico's -o flag has
+		been implemented, as has some new smooth scrolling code
+		(which can be used in place of the default jerky scrolling
+		behavior). Also, there is now a "find matching
+		bracket/brace/etc" feature (Meta-]).  The  .nanorc file
+		now accepts setting the tabsize, and the help text at the
+		bottom of the editor is now better spaced out in the
+		search/replace prompts.  There are also the usual helping
+		of bugfixes, translation updates and, surely a bug or two.
+		You better get ready!
+
+07/28/2001 - GNU nano 1.1.1 is released.  Our second 1.1 unstable release
+		features many bugfixes from the initial release, in
+		particular fixs for the multibuffer code, and various
+		compiler macro fixes.  The shortcut lists for
+		the search and replace prompts are a little more logical
+		(with cancel the last option again), and the included
+		gettext was re-downgraded to 0.10.35 due to problems
+		on the PPC platform.  GNU nano now includes its own
+		aclocal macros in the m4/ directory to allow rebuilding
+		the configure script to work on platforms regardless of
+		their gettext version.
+
+07/15/2001 - GNU nano 1.1.0 is released.  This is the first release
+		in the 1.1.x unstable series of GNU nano. It
+		incorporates all changes up to the 1.0.3 release, 
+		and also includes many many new features, including 
+		appending to as well as overwriting files, writing 
+		marked text to a separate file, dynamic wrap length, 
+		lots more compatibility with Pico, and new optional 
+		features like .nanorc file support and multiple file 
+		buffers!  All in all, plenty of new stuff that's sure 
+		to introduce lots of bugs ;-) Have fun with it, but
+		be careful, unstable means unstable.
+
 04/06/2001 - GNU nano 1.0.1 is out there.  The only new feature is a 
 		configure option for those who want to disable all
 		word wrapping from nano, --disable-wrapping.  Bug fixes
@@ -23,11 +211,11 @@
 		default list of shortcuts, "^G Get Help" is now Listed and
 		"^_ Goto Line" is not).  The Yes/No/All keys have
 		finally been internationalized also.   All in all, quite
-		a few changes considering nano is supposed to be in a code
-		freeze. But there are the usual helping of bugfixes, a
+		a few changes, considering nano is supposed to be in a code
+		freeze.  But there are the usual helping of bugfixes, a
 		nasty bug when cutting text in -k mode and some
-		compatibility with older ncurses libraries have also been
-		fixed.  All in all, a lot to see.
+		compatibility issues with older ncurses libraries have also
+		been fixed.  All in all, a lot to see.
 
 01/31/2001 - Nano 0.9.99pre2 is released.  Not surprisingly, all that is
 		new is bugfixes, bugfixes, bugfixes.  There were a few
@@ -60,7 +248,7 @@
 		tab completion in certain instances.  Have fun and Happy
 		New Year!
 
-12/18/2000 - Nano 0.9.24 is released.  This versions contains the last of
+12/18/2000 - Nano 0.9.24 is released.  This version contains the last of
 		the security fixes for writing files, as well as for a
 		nasty segfault when nano is unable to open a file for
 		reading, among other fixes.  Nano also now cowardly
@@ -74,11 +262,11 @@
 12/08/2000 - Nano 0.9.23 is the "race conditions bite" release.  The
 		main reason for this release is the less-than-optimal
 		fix for the security issue in nano with following symbolic
-		links.  Hopefully this will fix the probelm permanently.  
+		links.  Hopefully this will fix the problem permanently.  
 		The --nofollow option also works again for those who
 		are real security nuts.  There are also some display and
 		search fixes, and the --disable-spell function was renamed
-		to --disable-speller to be in line with nano and pico's
+		to --disable-speller to be in line with nano and Pico's
 		"speller" term.
 
 12/02/2000 - Nano 0.9.22 is released, with many more changes and 
@@ -114,10 +302,10 @@
 		(courtesy of Mr. Rocco Corsi) and tab completion when
 		reading in or writing out files!  There's also the usual
 		billion or so bug fixes.  Feedback on this release is
-		welcome because so much much has changed, especially with
-		the previous string display in search and replace. Email
-		-> nano@nano-editor.org <-. If you like something, don't
-		like something, or just want to order a pizza, let us know!
+		welcome because so much has changed, especially with the
+		previous string display in search and replace. Email ->
+		nano@nano-editor.org <-. If you like something, don't like
+		something, or just want to order a pizza, let us know!
 
 10/02/2000 - Nano 0.9.19 is the "Chris is getting married in less than
 		a week and needs a distraction" release.  There are only
@@ -143,16 +331,16 @@
 		flags (M-c, M-i, M-z, M-x, M-p, M-w, M-m, M-k and M-e for
 		-c, -i, -x, -p, -w, -k, and -R).
 
-08/09/2000 - Nano 0.9.16, after some struggling, is release.  This release
+08/09/2000 - Nano 0.9.16, after some struggling, is released.  This release
 		should fix a few of the holes that 0.9.15 dug.  The 
 		"cutting text on the first line" bug is fixed, as is the
 		"cutting text on the last line" bug.  Nice symmetry there
 		huh?  Also the --tabsize argument should now work as well
 		as by using -T.
 
-08/03/2000 - Nano 0.9.15 is the "I cant think of a release description"
+08/03/2000 - Nano 0.9.15 is the "I can't think of a release description"
 		release.  There are the usual gala of display bugfixes,
-		a for the the nasty bug in -k mode that could create a
+		a fix for the the nasty bug in -k mode that could create a
 		loop in the file being edited, and some other code
 		cleanup.  Also, the -T option should now work regardless
 		of the curses library used.  Yay.
@@ -161,7 +349,7 @@
 		be skipped as a version number" release.  One typo
 		caused unending problems (calling nano with either -t or
 		-k caused both flags to be used). The -k code is also now
-		closer in functionality to Pico's -k mode, please
+		closer in functionality to Pico's -k mode; please
 		note that this code is not finished yet.  Working on this
 		code has made me realize that there is not enough 
 		abstraction in the code, and I will be working on that
@@ -170,7 +358,7 @@
 
 07/23/2000 - Nano 0.9.13 has a few new bits and bobs, most notably the
 		-k option from Pico (cut to end of line).  The majority
-		of changes in this release are bugfixes however, including
+		of changes in this release are bugfixes, however, including
 		the usual display fixes and fixes for writing to symbolic
 		links and un-writeable files.  Barring any other major 
 		changes, this should be the feature set for nano 1.0,
@@ -179,12 +367,12 @@
 07/07/2000 - Nano 0.9.12 (The "lucky day" release) is bursting with new
 		features, bug fixes, and yummy fruit flavor.  For
 		changes, the alternate replace keystroke ^W^T is now
-		^W^R to be compatible with later version of Pico.
+		^W^R to be compatible with later versions of Pico.
 		^W^T is now goto line, again for Pico compatibility.
 		As for new features, the wonderful/hated magic line
 		code has returned with a vengeance!  Also, regular
 		expression searches and replaces have been incorporated
-		via the -R flag.  And of course there are the usual
+		via the -R flag.  And, of course, there are the usual
 		helping of display and other bug fixes to top it all
 		off.
 
@@ -198,8 +386,8 @@
 		this function just changes the way tabs LOOK in the
 		editor, the tabs you input are still real tabs of normal
 		width  (usually 8 characters); nano just makes them look
-		smaller or bigger whlie in the editor.  New in the
-		translation department is an indonesian translation (id).
+		smaller or bigger while in the editor.  New in the
+		translation department is an Indonesian translation (id).
 
 06/06/2000 - Nano 0.9.10 is primarily a bugfix for the loss of SIGINT when
 		using "run and terminate" flags (for example, --help).
@@ -218,7 +406,7 @@
 		the resize crash people have been experiencing.  It also
 		offers a new input method that should allow nano to do
 		things the right way (like ^S, ^Q, custom suspend keys)
-		and hopefully wont break with non-US keyboards.  There
+		and hopefully won't break with non-US keyboards.  There
 		are also the obligatory display fixes and speedups.  Have
 		fun with it.
 
@@ -239,7 +427,7 @@
 05/01/2000 - Nano 0.9.5 attempts to speed up the display of text
 		to be at least somewhat reasonable.  Much
 		code profiling has been done to reduce the 
-		rediculous number of redundant display updates.  This
+		ridiculous number of redundant display updates.  This
 		will probably expose a lot of bugs that can then be
 		fixed, so this release is probably not for the faint
 		of heart.  For anyone curious, I would call nano 0.9.2
@@ -265,7 +453,7 @@
 		so it is being removed for the time being, and perhaps
 		indefinitely.
 
-		Other new stuff includes a --emable-tiny option to make
+		Other new stuff includes an --enable-tiny option to make
 		nano ultra small (disabling i18n, detailed help and the
 		marker and mouse code), and --with-slang to use the 
 		slang libraries instead of ncurses.
@@ -273,13 +461,13 @@
 04/15/2000 - Nano 0.9.2 just fixes the serious segfault problem if 
 		nano is invoked any way other than using the absolute 
 		path.  The bug was in the new code for checking whether 
-		nano is invoked as pico.
+		nano is invoked as 'pico'.
 
 04/14/2000 - 0.9.1 has some more Pico compatibility built-in.  The
 		option to switch to/from Search and Search/Replace
 		(^T) is now available, and nano now displays the 
 		more Pico-like shortcut list when invoked as 'pico'
-		(i.e. if pico is a symlink to nano).  There is an
+		(i.e. if 'pico' is a symlink to nano).  There is an
 		important change to the handling of symbolic links
 		as well.  Now, nano does the "correct" thing and
 		automatically writes to the object of the symlink,
@@ -292,7 +480,7 @@
 
 04/07/2000 - Nano 0.9.0 has some updates, new language support and
 		a much better refresh setup (It's still not great, but...)
-		There should also be more stabillity editing long lines,
+		There should also be more stability editing long lines,
 		as there was a stupid mistake in the update_line
 		call.  Silly me =)
 
@@ -301,13 +489,13 @@
 		Most things work, the rest doesn't doesn't work because
 		(a) I can't fix it or I would have already done so, and
 		(b) the amount of patches I'm receiving right now is quite
-		negligible.  Forrunately this release marks the first
+		negligible.  Fortunately, this release marks the first
 		release since I have acquired ownership of the nano pages
 		on SourceForge.  Here's hoping SF will get us some more
-		visibilitiy, translators and patches.
+		visibility, translators and patches.
 
 03/12/2000 - After a hiatus, I have finally moved (not unpacked though)
-		to my new home into albany. Thus I should now have more
+		to my new home into Albany. Thus I should now have more
 		time to work on nano.  Nano 0.8.8, the "dear god what
 		broke this time?" release, incorporates patches for both
 		i18n and many bugfixes.  It is VERY likely something broke 
@@ -316,8 +504,8 @@
 
 		I would like to announce that I'm going to need
 		translations soonish, so if you are fluent in other
-		languages than english (or even better, if your native
-		language is not english) and you would like to submit a
+		languages than English (or even better, if your native
+		language is not English) and you would like to submit a
 		translation file to me, please feel free to do so.  If you
 		do, I will list your name and email in the AUTHORS file as
 		the maintainer of the .po file, and from then on it is
@@ -325,9 +513,9 @@
 
 03/01/2000 - Well, to continue my trend of going back on my previous
 		release's comments, nano 0.8.7 is released.  The crashing
-		behavior was still occuring, and this most recent fix also
+		behavior was still occurring, and this most recent fix also
 		fixes some other wrapping problems, so here you go.
-		There may be another relase soon, there may not be, is
+		There may be another release soon, there may not be, is
 		that vague enough? =)
 
 02/25/2000 - More minor bugfixes in 0.8.6, the bizarre behavior at the end
@@ -354,11 +542,11 @@
 		but I may be changing jobs very soon.  I will release
 		version 0.8.2 as is (no i18n, no help menu (yet).  I
 		expect things to settle down by the end of next week, and
-		then I can try to start on the i18n support and help menu,
+		then I can try to start on the i18n support and help menu;
 		look for these new features in version 0.8.5 to 0.9.0.
 
 01/28/2000 - Nano 0.8.1 marks our first official step toward
-		internationaliation (i18n) and the help system (^G).  I
+		internationalization (i18n) and the help system (^G).  I
 		will be merging in Jordi's patches for initial i18n in the
 		next version, and will implement the help system with
 		i18n built into it shortly after that.  Please don't
@@ -367,14 +555,14 @@
 
 01/25/2000 - Nano 0.8.0 is officially the 'let's try and be at least a
 		little portable, mmmmkay?' release.  There are many
-		portability checks and fixes, many thanks to Andy Kahn for
+		portability checks and fixes; many thanks to Andy Kahn for
 		his patches.  I removed the broken do_spell behavior with
-		the 'spell' program, for now we only try to call 'ispell'
+		the 'spell' program; for now, we only try to call 'ispell'
 		until I write a better method to handle the output of the
 		normal 'spell' command.
 
 01/24/2000 - Nano 0.7.9 features many new features. Among them are a
-		new autoindent feature (-i, --autoondent), tempfile
+		new autoindent feature (-i, --autoindent), tempfile
 		flag like Pico's -t flag (-t, --tempfile), and preliminary
 		spelling program support.  The spelling function tries
 		to run 'spell' and then 'ispell' in that order, but you
@@ -387,7 +575,7 @@
 		all the changes in this release will cause a few bugs, so
 		0.7.8 will primarily be about fixing those bugs.
 
-		Things added this release include resizeability (kinda),
+		Things added this release include resizability (kinda),
 		new -x and -c flags (see nano -h for help), long command
 		line flag support, and the usual array of bugfixes.
 

README

@@ -1,6 +1,6 @@
 
 	GNU nano - an enhanced clone of the Pico text editor.
-                                      
+
 Overview
 
      The nano project was started because of a few "problems" with the
@@ -11,10 +11,10 @@ Overview
      redistribution.  Because of this, Pine and Pico are not included with
      many GNU/Linux distributions.  Also, other features (like goto line
      number or search and replace) were unavailable until recently or
-     require a command-line flag.  Yuck.
+     require a command line flag.  Yuck.
 
      nano aims to solve these problems by emulating the functionality of
-     Pico as closely as possible while adressing the problems above and
+     Pico as closely as possible while addressing the problems above and
      perhaps providing other extra functionality.
 
      The nano editor is now an official GNU package.  For more information
@@ -29,7 +29,7 @@ How to compile and install nano
      make
      make install
      
-     It's that simple. Use --prefix with configutr to override the 
+     It's that simple. Use --prefix with configure to override the 
      default installation directory of /usr/local.
      
 Web Page
@@ -38,14 +38,17 @@ Web Page
      
 Mailing List and Bug Reports
 
-	SourceForge hosts all the nano-related mailing-lists.
-	+ nano-announce@lists.sourceforge.net is a very low traffic list
+	Savannah hosts all the nano-related mailing-lists.
+	+ info-nano@gnu.org is a very low traffic list
 	  used to announce new Nano versions or other important information
 	  about the project.
-	+ nano-devel@lists.sourceforge.net is the list used by the people
+	+ help-nano@gnu.org is for those seeking to get help without
+	  wanting to hear about the technical details of its
+	  development.
+	+ nano-devel@gnu.org is the list used by the people
 	  that make Nano and a general development discussion list, with
 	  moderate traffic.
-	To subscribe, send email to nano-<name>-request@lists.sourceforge.net
+	To subscribe, send email to nano-<name>-request@gnu.org
 	with a subject of "subscribe", where <name> is the list you want to
 	subscribe to.
 	For general bug reports, send a description of the problem to
@@ -53,11 +56,32 @@ Mailing List and Bug Reports
 
 Current Status
 
-	GNU nano has finally reached its first stable release (1.0).
-	The development tree will fork soon and it will be called 1.1.x,
-	in the Linux kernel naming style.  Many thanks to all of our
-	bug reporters and contributors of code to get nano where it is
-	today.
+	This is the 1.1 or unstable branch of nano.  New features
+	will be added and things will be changed around and basically
+	stability is not guaranteed.  If this is not what you're
+	interested in, please use the latest 1.0.x release of nano.
+
+	New features in this branch include:
+	+ .nanorc file support (--enable-nanorc configure option, 
+	  see sample.nanorc file)
+	+ Negative -r value for "#cols from right", allows dynamic adjustment
+	  of wrap margin based on window size.
+	+ Write marked text to separate file (^O after selecting with ^^).
+	+ Append to file (Meta-A at write file menu).
+	+ Multiple file buffers! (--enable-multibuffer configure option,
+	  --multibuffer, -F cmdline flag, Meta-F toggle, then ^R to load).
+	+ Better compatibility with Pico.  Mouse mode now supports clicking
+	  shortcuts and files in browser, search toggles that are Pico 
+	  extensions moved to Meta keys so as to not interfere with Pico
+	  control sequences.
+	+ Smooth scrolling through files, instead of the jerky half-page
+	  down, half-page up method.  This is available by using the 
+	  -S or --smooth switch, or the Meta-S toggle.
+	+ Better non-*nix file support.  GNU nano now automatically
+	  converts files from DOS format or Mac format to standard file
+	  format.  It can also write files in either format by using the
+	  appropriate command line (-D, --dos or -M, --mac) or toggle
+	  (Meta-D, Meta-O).
 
    Chris Allegretta (chrisa@asty.org)
 

README.CVS

@@ -0,0 +1,38 @@
+INSTRUCTIONS TO COMPILE AND INSTALL NANO CVS VERSIONS
+-----------------------------------------------------
+
+GNU nano is available from CVS, but building this needs a bit
+more care than the official stable and unstable tarballs.
+
+To succesfully compile GNU nano from CVS, you'll need the
+following packages:
+
+- autoconf (version >= 2.52)
+- automake (version >= 1.5-pl5, 1.6.x recommended)
+- gettext (version >= 0.11)
+- texinfo
+- cvs
+- glib (if your system doesn't have snprintf() and/or vsnprintf())
+- make, gcc and the normal development libraries (ncurses, etc)
+These should be available on your GNU mirror.
+
+
+To download the CVS tree, execute the following command:
+$ cvs -z3 -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/nano login
+and press enter at the password prompt.
+Then, do
+$ cvs -z3 -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/nano checkout nano
+and the nano tree will download.
+If you want to checkout the stable CVS branch, append -r nano_1_0_branch:
+$ cvs -z3 -d:pserver:anonymous@subversions.gnu.org:/cvsroot/nano checkout -r nano_1_0_branch nano
+
+Once you have the sources in the "nano" directory, cd into it, and execute
+the "autogen.sh" script in the top dir. This will setup a configure script
+and Makefile.in, and you will be ready to compile with
+$ ./configure [--add-options-here] && make
+Once it's done compiling,
+$ make install
+(as root) should put the required files in their respective directories.
+
+
+Please submit any bugs in the CVS branch to nano-devel@gnu.org.

THANKS

@@ -0,0 +1,49 @@
+The following people have helped GNU nano in some way or another.
+If we missed you here, let us know!
+
+Sharuzzaman Ahmat Raslan <sharuzzaman@excite.com>
+						Bahasa Melayu translator
+Ricardo Cárdenes Medina <ricardo@conisys.com>	Spanish translator
+Marco Colombo <magicdice@inwind.it>		Italian translator
+Karl Eichwalder <keichwa@gmx.net>		German translator
+Jean-Philippe Guérard <jean-philippe.guerard@laposte.net>
+						French translator
+Tedi Heriyanto <tedi_h@gmx.net>			Indonesian translator
+Václav Haisman <V.Haisman@sh.cvut.cz>		Czech translator
+Szabolcs Horvath <horvaths@janus.gimsz.sulinet.hu>
+						Hungarian translator
+Eivind Kjørstad <ekj@vestdata.no>		Norwegian nynorsk translator
+Florian König <floki@bigfoot.com>		German translator
+Wojciech Kotwica <wkotwica@post.pl>		Polish translator
+Clement Laforet <clem_laf@wanadoo.fr>		French translator
+Gergely Nagy <algernon@debian.org>		Hungarian translator
+Claudio Neves <cneves@nextis.com>		Brazilian Portuguese translator
+Michael Piefel <piefel@informatik.hu-berlin.de> German translator
+Sergey A. Ribalchenko <fisher@obu.ck.ua>	Russian, Ukrainian translator
+Michel Robitaille <robitail@IRO.UMontreal.CA>	French translator
+Christian Rose <menthos@menthos.com>		Swedish translator
+Stig E Sandoe <stig@ii.uib.no>			Norwegian bokmål translator
+Keld Simonsen <keld@dkuug.dk>			Danish translator
+Guus Sliepen <guus@nl.linux.org>		Dutch translator
+Cezary Sliwa <sliwa@cft.edu.pl>			Polish translator
+Pierre Tane <tanep@bigfoot.com>			French translator
+Jacobo Tarrío <jtarrio@trasno.net>		Galician translator
+Kjetil Torgrim Homme <kjetilho@linpro.no>	Norwegian nynorsk translator
+Miquel Vidal <miquel@sindominio.net>		Catalan translator
+Pauli Virtanen <pauli.virtanen@saunalahti.fi>	Finnish translator
+
+Ben Armstrong <synrg@sanctuary.nslug.ns.ca>	Negative -r value idea, code
+Thomas Dickey <dickey@herndon4.his.com>		Curses help and advice
+Sven Guckes <guckes@math.fu-berlin.de>		Advice and Advocacy
+Jim Knoble <jmknoble@pobox.com>			Pico compat for browser
+Ryan Krebs <fluffy@highwire.stanford.edu>	Many bug fixes and testing
+Roy Lanek <lanek@ranahminang.net>		Advice and advocacy
+Chuck Mead <csm@MoonGroup.com>			Feedback and RPM stuff
+Mike Melanson <melanson@pcisys.net>		Bugs
+Neil Parks <nparks@acsmail.com>			Bug reports and fixes
+Jeremy Robichaud <robicj@yahoo.com>		Beta tester
+Bill Soudan <wes0472@rit.edu>			Regex code, etc
+Ken Tyler <kent@werple.net.au>			Search fixes and more
+
+
+$Id$

TODO

@@ -1,7 +1,28 @@
 TODO file (? means the feature may be implemented, but not definitely)
 -----------------------------------------------------------------------------
 
-Current Version:
+For version 1.2:
+- Single line scroll up/down? [DONE]
+- Color syntax highlighting? (certainly seems like there's a demand for it.)
+- .nanorc [DONE]
+- Backup making (filename~)? [DONE]
+- Search (etc) string history [1.2]
+- Implement Pico's -j and -g flags, as they are pretty easy to do. [DONE]
+- Make mouse support work with clicking on the shortcuts (-m).  Must
+  make global variable pointing to current shortcut list to determine what
+  keystroke to ungetch(). [DONE].
+- Implement -o (chroot of sorts) [DONE]
+- Allow -r to take a negative argument, meaning right margin instead of
+  left (allows resizing that way), formerly -W arg. [DONE]
+
+For version 1.4:
+- UTF-8 support.
+- Support for Pico's paragraph searching ability.
+- Undo/Redo key?
+
+Old requests:
+
+For version 1.0:
 - Implement Spelling [DONE]
 - Implement Help [DONE]
 - Internationalization [In progress, translators welcome!]
@@ -18,17 +39,4 @@ Current Version:
 - Unjustify command (^U after ^J) [DONE =-].
 - Username completion (~user) [DONE =-].
 
-For Next Version:
-- Undo/Redo key?
-- Single line scroll up/down?
-- Color syntax highlighting? (certainly seems like there's a demand for it.)
-- .nanorc ?????
-- Backup making (filename~)?
-- Search (etc) string history [1.1]
-- Implent Pico's -j and -g flags, as they are pretty easy to do.
-- Make mouse support work with clicking on the shortcuts (-m).  Must
-  make global variable pointing to current shortcut list to determine what
-  keystroke to ungetch().
-- Implement -o (chroot of sorts)
-
 $Id$

acconfig.h

@@ -1,53 +0,0 @@
-/* $Id$ */
-
-/* Define this if you have the wresize function in your ncurses-type library */
-#undef HAVE_WRESIZE
-
-/* Define this if you have the resizeterm function in your ncurses-type library */
-#undef HAVE_RESIZETERM
-
-/* Define this if your curses lib has the _use_keypad flag */
-#undef HAVE_USEKEYPAD
-
-/* Define this if you have NLS */
-#undef ENABLE_NLS
-
-/* Define this is you have the catgets command */
-#undef HAVE_CATGETS
-
-/* Define this is you have GNU gettext */
-#undef HAVE_GETTEXT
-
-/* Define this for HAVE_LC_MESSAGES */
-#undef HAVE_LC_MESSAGES
-
-/* Define this if you have the stpcpy function (cool) */
-#undef HAVE_STPCPY
-
-/* Define this to make the nano executable as small as possible */
-#undef NANO_SMALL
-
-/* Define to use the slang wrappers for curses instead of native curses */
-#undef USE_SLANG
-
-/* Define this to enable the extra stuff */
-#undef NANO_EXTRA
-
-/* Define to disable the tab completion code Chris worked so hard on! */
-#undef DISABLE_TABCOMP
-
-/* Define this to disable the justify routine */
-#undef DISABLE_JUSTIFY
-
-/* Define this to disable the use(full|less) spelling functions */
-#undef DISABLE_SPELLER
-
-/* Define this to disable the ^G help menu */
-#undef DISABLE_HELP
-
-/* Define this to disable the built-in (crappy) file browser */
-#undef DISABLE_BROWSER
-
-/* Define this to disable any and all text wrapping */
-#undef DISABLE_WRAPPING
-

aclocal.m4

@@ -1,708 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated.  We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
-  case " <<$>>CONFIG_HEADERS " in
-  *" <<$>>am_file "*<<)>>
-    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-    ;;
-  esac
-  am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
-
-# Configure paths for GLIB
-# Owen Taylor     97-11-3
-
-dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
-dnl gthread is specified in MODULES, pass to glib-config
-dnl
-AC_DEFUN(AM_PATH_GLIB,
-[dnl 
-dnl Get the cflags and libraries from the glib-config script
-dnl
-AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
-            glib_config_prefix="$withval", glib_config_prefix="")
-AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
-            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
-AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
-		    , enable_glibtest=yes)
-
-  if test x$glib_config_exec_prefix != x ; then
-     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
-     if test x${GLIB_CONFIG+set} != xset ; then
-        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
-     fi
-  fi
-  if test x$glib_config_prefix != x ; then
-     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
-     if test x${GLIB_CONFIG+set} != xset ; then
-        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
-     fi
-  fi
-
-  for module in . $4
-  do
-      case "$module" in
-         gmodule) 
-             glib_config_args="$glib_config_args gmodule"
-         ;;
-         gthread) 
-             glib_config_args="$glib_config_args gthread"
-         ;;
-      esac
-  done
-
-  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
-  min_glib_version=ifelse([$1], ,0.99.7,$1)
-  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
-  no_glib=""
-  if test "$GLIB_CONFIG" = "no" ; then
-    no_glib=yes
-  else
-    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
-    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
-    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_glibtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GLIB_CFLAGS"
-      LIBS="$GLIB_LIBS $LIBS"
-dnl
-dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-dnl checks the results of glib-config to some extent
-dnl
-      rm -f conf.glibtest
-      AC_TRY_RUN([
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.glibtest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_glib_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_glib_version");
-     exit(1);
-   }
-
-  if ((glib_major_version != $glib_config_major_version) ||
-      (glib_minor_version != $glib_config_minor_version) ||
-      (glib_micro_version != $glib_config_micro_version))
-    {
-      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
-             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
-             glib_major_version, glib_minor_version, glib_micro_version);
-      printf ("*** was found! If glib-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
-      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
-      printf("*** before re-running configure\n");
-    } 
-  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
-	   (glib_minor_version != GLIB_MINOR_VERSION) ||
-           (glib_micro_version != GLIB_MICRO_VERSION))
-    {
-      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
-	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     glib_major_version, glib_minor_version, glib_micro_version);
-    }
-  else
-    {
-      if ((glib_major_version > major) ||
-        ((glib_major_version == major) && (glib_minor_version > minor)) ||
-        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
-               glib_major_version, glib_minor_version, glib_micro_version);
-        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
-        printf("*** correct copy of glib-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_glib" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$GLIB_CONFIG" = "no" ; then
-       echo "*** The glib-config script installed by GLIB could not be found"
-       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
-       echo "*** full path to glib-config."
-     else
-       if test -f conf.glibtest ; then
-        :
-       else
-          echo "*** Could not run GLIB test program, checking why..."
-          CFLAGS="$CFLAGS $GLIB_CFLAGS"
-          LIBS="$LIBS $GLIB_LIBS"
-          AC_TRY_LINK([
-#include <glib.h>
-#include <stdio.h>
-],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
-          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-          echo "***"
-          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
-          echo "*** came with the system with the command"
-          echo "***"
-          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
-          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
-          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GLIB_CFLAGS=""
-     GLIB_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GLIB_CFLAGS)
-  AC_SUBST(GLIB_LIBS)
-  rm -f conf.glibtest
-])
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 5
-
-AC_DEFUN(AM_WITH_NLS,
-  [AC_MSG_CHECKING([whether NLS is requested])
-    dnl Default is enabled NLS
-    AC_ARG_ENABLE(nls,
-      [  --disable-nls           do not use Native Language Support],
-      USE_NLS=$enableval, USE_NLS=yes)
-    AC_MSG_RESULT($USE_NLS)
-    AC_SUBST(USE_NLS)
-
-    USE_INCLUDED_LIBINTL=no
-
-    dnl If we use NLS figure out what method
-    if test "$USE_NLS" = "yes"; then
-      AC_DEFINE(ENABLE_NLS)
-      AC_MSG_CHECKING([whether included gettext is requested])
-      AC_ARG_WITH(included-gettext,
-        [  --with-included-gettext use the GNU gettext library included here],
-        nls_cv_force_use_gnu_gettext=$withval,
-        nls_cv_force_use_gnu_gettext=no)
-      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
-      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
-      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
-        dnl User does not insist on using GNU NLS library.  Figure out what
-        dnl to use.  If gettext or catgets are available (in this order) we
-        dnl use this.  Else we have to fall back to GNU NLS library.
-	dnl catgets is only used if permitted by option --with-catgets.
-	nls_cv_header_intl=
-	nls_cv_header_libgt=
-	CATOBJEXT=NONE
-
-	AC_CHECK_HEADER(libintl.h,
-	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
-	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
-	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
-	   if test "$gt_cv_func_gettext_libc" != "yes"; then
-	     AC_CHECK_LIB(intl, bindtextdomain,
-	       [AC_CACHE_CHECK([for gettext in libintl],
-		 gt_cv_func_gettext_libintl,
-		 [AC_CHECK_LIB(intl, gettext,
-		  gt_cv_func_gettext_libintl=yes,
-		  gt_cv_func_gettext_libintl=no)],
-		 gt_cv_func_gettext_libintl=no)])
-	   fi
-
-	   if test "$gt_cv_func_gettext_libc" = "yes" \
-	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
-	      AC_DEFINE(HAVE_GETTEXT)
-	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
-	      if test "$MSGFMT" != "no"; then
-		AC_CHECK_FUNCS(dcgettext)
-		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
-			       return _nl_msg_cat_cntr],
-		  [CATOBJEXT=.gmo
-		   DATADIRNAME=share],
-		  [CATOBJEXT=.mo
-		   DATADIRNAME=lib])
-		INSTOBJEXT=.mo
-	      fi
-	    fi
-	])
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  AC_MSG_CHECKING([whether catgets can be used])
-	  AC_ARG_WITH(catgets,
-	    [  --with-catgets          use catgets functions if available],
-	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
-	  AC_MSG_RESULT($nls_cv_use_catgets)
-
-	  if test "$nls_cv_use_catgets" = "yes"; then
-	    dnl No gettext in C library.  Try catgets next.
-	    AC_CHECK_LIB(i, main)
-	    AC_CHECK_FUNC(catgets,
-	      [AC_DEFINE(HAVE_CATGETS)
-	       INTLOBJS="\$(CATOBJS)"
-	       AC_PATH_PROG(GENCAT, gencat, no)dnl
-	       if test "$GENCAT" != "no"; then
-		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-		 if test "$GMSGFMT" = "no"; then
-		   AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
-		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
-		 fi
-		 AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		 USE_INCLUDED_LIBINTL=yes
-		 CATOBJEXT=.cat
-		 INSTOBJEXT=.cat
-		 DATADIRNAME=lib
-		 INTLDEPS='$(top_builddir)/intl/libintl.a'
-		 INTLLIBS=$INTLDEPS
-		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-		 nls_cv_header_intl=intl/libintl.h
-		 nls_cv_header_libgt=intl/libgettext.h
-	       fi])
-	  fi
-        fi
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  dnl Neither gettext nor catgets in included in the C library.
-	  dnl Fall back on GNU gettext library.
-	  nls_cv_use_gnu_gettext=yes
-        fi
-      fi
-
-      if test "$nls_cv_use_gnu_gettext" = "yes"; then
-        dnl Mark actions used to generate GNU NLS library.
-        INTLOBJS="\$(GETTOBJS)"
-        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
-        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-        AC_SUBST(MSGFMT)
-	USE_INCLUDED_LIBINTL=yes
-        CATOBJEXT=.gmo
-        INSTOBJEXT=.mo
-        DATADIRNAME=share
-	INTLDEPS='$(top_builddir)/intl/libintl.a'
-	INTLLIBS=$INTLDEPS
-	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-        nls_cv_header_intl=intl/libintl.h
-        nls_cv_header_libgt=intl/libgettext.h
-      fi
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext program is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-
-      # We need to process the po/ directory.
-      POSUB=po
-    else
-      DATADIRNAME=share
-      nls_cv_header_intl=intl/libintl.h
-      nls_cv_header_libgt=intl/libgettext.h
-    fi
-    AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
-    AC_OUTPUT_COMMANDS(
-     [case "$CONFIG_FILES" in *po/Makefile.in*)
-        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
-      esac])
-
-
-    # If this is used in GNU gettext we have to set USE_NLS to `yes'
-    # because some of the sources are only built for this goal.
-    if test "$PACKAGE" = gettext; then
-      USE_NLS=yes
-      USE_INCLUDED_LIBINTL=yes
-    fi
-
-    dnl These rules are solely for the distribution goal.  While doing this
-    dnl we only have to keep exactly one list of the available catalogs
-    dnl in configure.in.
-    for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-    dnl Make all variables we use known to autoconf.
-    AC_SUBST(USE_INCLUDED_LIBINTL)
-    AC_SUBST(CATALOGS)
-    AC_SUBST(CATOBJEXT)
-    AC_SUBST(DATADIRNAME)
-    AC_SUBST(GMOFILES)
-    AC_SUBST(INSTOBJEXT)
-    AC_SUBST(INTLDEPS)
-    AC_SUBST(INTLLIBS)
-    AC_SUBST(INTLOBJS)
-    AC_SUBST(POFILES)
-    AC_SUBST(POSUB)
-  ])
-
-AC_DEFUN(AM_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_CC])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_ISC_POSIX])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_C_CONST])dnl
-   AC_REQUIRE([AC_C_INLINE])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-
-   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h sys/param.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-strdup __argz_count __argz_stringify __argz_next])
-
-   if test "${ac_cv_func_stpcpy+set}" != "set"; then
-     AC_CHECK_FUNCS(stpcpy)
-   fi
-   if test "${ac_cv_func_stpcpy}" = "yes"; then
-     AC_DEFINE(HAVE_STPCPY)
-   fi
-
-   AM_LC_MESSAGES
-   AM_WITH_NLS
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-   dnl The reference to <locale.h> in the installed <libintl.h> file
-   dnl must be resolved because we cannot expect the users of this
-   dnl to define HAVE_LOCALE_H.
-   if test $ac_cv_header_locale_h = yes; then
-     INCLUDE_LOCALE_H="#include <locale.h>"
-   else
-     INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>.  Take care yourself.  */"
-   fi
-   AC_SUBST(INCLUDE_LOCALE_H)
-
-   dnl Determine which catalog format we have (if any is needed)
-   dnl For now we know about two different formats:
-   dnl   Linux libc-5 and the normal X/Open format
-   test -d intl || mkdir intl
-   if test "$CATOBJEXT" = ".cat"; then
-     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
-     dnl Transform the SED scripts while copying because some dumb SEDs
-     dnl cannot handle comments.
-     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
-   fi
-   dnl po2tbl.sed is always needed.
-   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
-     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
-   dnl In the intl/Makefile.in we have a special dependency which makes
-   dnl only sense for gettext.  We comment this out for non-gettext
-   dnl packages.
-   if test "$PACKAGE" = "gettext"; then
-     GT_NO="#NO#"
-     GT_YES=
-   else
-     GT_NO=
-     GT_YES="#YES#"
-   fi
-   AC_SUBST(GT_NO)
-   AC_SUBST(GT_YES)
-
-   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
-   dnl Try to locate is.
-   MKINSTALLDIRS=
-   if test -n "$ac_aux_dir"; then
-     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-   fi
-   if test -z "$MKINSTALLDIRS"; then
-     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-   fi
-   AC_SUBST(MKINSTALLDIRS)
-
-   dnl *** For now the libtool support in intl/Makefile is not for real.
-   l=
-   AC_SUBST(l)
-
-   dnl Generate list of files to be processed by xgettext which will
-   dnl be included in po/Makefile.
-   test -d po || mkdir po
-   if test "x$srcdir" != "x."; then
-     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-       posrcprefix="$srcdir/"
-     else
-       posrcprefix="../$srcdir/"
-     fi
-   else
-     posrcprefix="../"
-   fi
-   rm -f po/POTFILES
-   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-	< $srcdir/po/POTFILES.in > po/POTFILES
-  ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES)
-    fi
-  fi])
-

autogen.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+# Generate configure & friends for CVS users.
+
+aclocal -I ./m4
+autoheader
+automake --add-missing
+autoconf

color.c

@@ -0,0 +1,136 @@
+/* $Id$ */
+/**************************************************************************
+ *   color.c                                                              *
+ *                                                                        *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
+ *   This program is free software; you can redistribute it and/or modify *
+ *   it under the terms of the GNU General Public License as published by *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
+ *   any later version.                                                   *
+ *                                                                        *
+ *   This program is distributed in the hope that it will be useful,      *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of       *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        *
+ *   GNU General Public License for more details.                         *
+ *                                                                        *
+ *   You should have received a copy of the GNU General Public License    *
+ *   along with this program; if not, write to the Free Software          *
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.            *
+ *                                                                        *
+ **************************************************************************/
+
+#include "config.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include "proto.h"
+#include "nano.h"
+
+#ifdef ENABLE_COLOR
+
+/* For each syntax list entry, we go through the list of colors and
+ * assign color pairs. */
+void set_colorpairs(void)
+{
+    const syntaxtype *this_syntax = syntaxes;
+
+    for(; this_syntax != NULL; this_syntax = this_syntax->next) {
+	colortype *this_color = this_syntax->color;
+	int color_pair = 1;
+
+	for(; this_color != NULL; this_color = this_color->next) {
+	    const colortype *beforenow = this_syntax->color;
+
+	    for(; beforenow != NULL && beforenow != this_color && 
+			(beforenow->fg != this_color->fg ||
+			 beforenow->bg != this_color->bg ||
+			 beforenow->bright != this_color->bright);
+		    beforenow = beforenow->next)
+		;
+
+	    if (beforenow != NULL && beforenow != this_color)
+		this_color->pairnum = beforenow->pairnum;
+	    else {
+		this_color->pairnum = color_pair;
+		color_pair++;
+	    }
+	}
+    }
+}
+
+void do_colorinit(void)
+{
+    if (has_colors()) {
+	const colortype *tmpcolor = NULL;
+#ifdef HAVE_USE_DEFAULT_COLORS
+	int defok;
+#endif
+
+	start_color();
+	/* Add in colors, if available */
+
+#ifdef HAVE_USE_DEFAULT_COLORS
+	defok = use_default_colors() != ERR;
+#endif
+
+	for (tmpcolor = colorstrings; tmpcolor != NULL; 
+		tmpcolor = tmpcolor->next) {
+	    short background = tmpcolor->bg;
+
+	    if (background == -1)
+#ifdef HAVE_USE_DEFAULT_COLORS
+		if (!defok)
+#endif
+		    background = COLOR_BLACK;
+
+	    init_pair(tmpcolor->pairnum, tmpcolor->fg, background);
+
+#ifdef DEBUG
+	    fprintf(stderr, _("Running init_pair with fg = %d and bg = %d\n"), tmpcolor->fg, tmpcolor->bg);
+#endif
+	}
+    }
+}
+
+/* Update the color information based on the current filename */
+void update_color(void)
+{
+    const syntaxtype *tmpsyntax;
+
+    colorstrings = NULL;
+    for (tmpsyntax = syntaxes; tmpsyntax != NULL; tmpsyntax = tmpsyntax->next) {
+	const exttype *e;
+
+	for (e = tmpsyntax->extensions; e != NULL; e = e->next) {
+	    regex_t syntaxfile_regexp;
+
+	    regcomp(&syntaxfile_regexp, e->val, REG_EXTENDED | REG_NOSUB);
+
+	    /* Set colorstrings if we matched the extension regex */
+            if (!regexec(&syntaxfile_regexp, filename, 0, NULL, 0))
+		colorstrings = tmpsyntax->color;
+
+	    regfree(&syntaxfile_regexp);
+	    if (colorstrings != NULL)
+		break;
+	}
+    }
+
+    /* if we haven't found a match, use the override string */
+    if (colorstrings == NULL && syntaxstr != NULL) {
+	for (tmpsyntax = syntaxes; tmpsyntax != NULL; 
+	     tmpsyntax = tmpsyntax->next) {
+	    if (!strcasecmp(tmpsyntax->desc, syntaxstr))
+		colorstrings = tmpsyntax->color;
+	}
+    }
+    do_colorinit();
+    edit_refresh();
+}
+
+#endif /* ENABLE_COLOR */

config.h.in

@@ -1,210 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if using alloca.c.  */
-#undef C_ALLOCA
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-#undef CRAY_STACKSEG_END
-
-/* Define if you have alloca, as a function or macro.  */
-#undef HAVE_ALLOCA
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#undef HAVE_ALLOCA_H
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-#undef HAVE_DOPRNT
-
-/* Define if you have a working `mmap' system call.  */
-#undef HAVE_MMAP
-
-/* Define if you have the vprintf function.  */
-#undef HAVE_VPRINTF
-
-/* Define as __inline if that's what the C compiler calls it.  */
-#undef inline
-
-/* Define to `long' if <sys/types.h> doesn't define.  */
-#undef off_t
-
-/* Define if you need to in order for stat and other things to work.  */
-#undef _POSIX_SOURCE
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown
- */
-#undef STACK_DIRECTION
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define this if you have the wresize function in your ncurses-type library */
-#undef HAVE_WRESIZE
-
-/* Define this if you have the resizeterm function in your ncurses-type library */
-#undef HAVE_RESIZETERM
-
-/* Define this if your curses lib has the _use_keypad flag */
-#undef HAVE_USEKEYPAD
-
-/* Define this if you have NLS */
-#undef ENABLE_NLS
-
-/* Define this is you have the catgets command */
-#undef HAVE_CATGETS
-
-/* Define this is you have GNU gettext */
-#undef HAVE_GETTEXT
-
-/* Define this for HAVE_LC_MESSAGES */
-#undef HAVE_LC_MESSAGES
-
-/* Define this if you have the stpcpy function (cool) */
-#undef HAVE_STPCPY
-
-/* Define this to make the nano executable as small as possible */
-#undef NANO_SMALL
-
-/* Define to use the slang wrappers for curses instead of native curses */
-#undef USE_SLANG
-
-/* Define this to enable the extra stuff */
-#undef NANO_EXTRA
-
-/* Define to disable the tab completion code Chris worked so hard on! */
-#undef DISABLE_TABCOMP
-
-/* Define this to disable the justify routine */
-#undef DISABLE_JUSTIFY
-
-/* Define this to disable the use(full|less) spelling functions */
-#undef DISABLE_SPELLER
-
-/* Define this to disable the ^G help menu */
-#undef DISABLE_HELP
-
-/* Define this to disable the built-in (crappy) file browser */
-#undef DISABLE_BROWSER
-
-/* Define this to disable any and all text wrapping */
-#undef DISABLE_WRAPPING
-
-/* Define if you have the __argz_count function.  */
-#undef HAVE___ARGZ_COUNT
-
-/* Define if you have the __argz_next function.  */
-#undef HAVE___ARGZ_NEXT
-
-/* Define if you have the __argz_stringify function.  */
-#undef HAVE___ARGZ_STRINGIFY
-
-/* Define if you have the dcgettext function.  */
-#undef HAVE_DCGETTEXT
-
-/* Define if you have the getcwd function.  */
-#undef HAVE_GETCWD
-
-/* Define if you have the getopt_long function.  */
-#undef HAVE_GETOPT_LONG
-
-/* Define if you have the getpagesize function.  */
-#undef HAVE_GETPAGESIZE
-
-/* Define if you have the munmap function.  */
-#undef HAVE_MUNMAP
-
-/* Define if you have the putenv function.  */
-#undef HAVE_PUTENV
-
-/* Define if you have the setenv function.  */
-#undef HAVE_SETENV
-
-/* Define if you have the setlocale function.  */
-#undef HAVE_SETLOCALE
-
-/* Define if you have the snprintf function.  */
-#undef HAVE_SNPRINTF
-
-/* Define if you have the stpcpy function.  */
-#undef HAVE_STPCPY
-
-/* Define if you have the strcasecmp function.  */
-#undef HAVE_STRCASECMP
-
-/* Define if you have the strchr function.  */
-#undef HAVE_STRCHR
-
-/* Define if you have the strdup function.  */
-#undef HAVE_STRDUP
-
-/* Define if you have the vsnprintf function.  */
-#undef HAVE_VSNPRINTF
-
-/* Define if you have the <argz.h> header file.  */
-#undef HAVE_ARGZ_H
-
-/* Define if you have the <curses.h> header file.  */
-#undef HAVE_CURSES_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <getopt.h> header file.  */
-#undef HAVE_GETOPT_H
-
-/* Define if you have the <limits.h> header file.  */
-#undef HAVE_LIMITS_H
-
-/* Define if you have the <locale.h> header file.  */
-#undef HAVE_LOCALE_H
-
-/* Define if you have the <malloc.h> header file.  */
-#undef HAVE_MALLOC_H
-
-/* Define if you have the <ncurses.h> header file.  */
-#undef HAVE_NCURSES_H
-
-/* Define if you have the <nl_types.h> header file.  */
-#undef HAVE_NL_TYPES_H
-
-/* Define if you have the <regex.h> header file.  */
-#undef HAVE_REGEX_H
-
-/* Define if you have the <string.h> header file.  */
-#undef HAVE_STRING_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <termio.h> header file.  */
-#undef HAVE_TERMIO_H
-
-/* Define if you have the <termios.h> header file.  */
-#undef HAVE_TERMIOS_H
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the i library (-li).  */
-#undef HAVE_LIBI
-
-/* Name of package */
-#undef PACKAGE
-
-/* Version number of package */
-#undef VERSION
-

config.rpath

@@ -0,0 +1,513 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+#   Copyright 1996-2002 Free Software Foundation, Inc.
+#   Taken from GNU libtool, 2001
+#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+#   As a special exception to the GNU General Public License, if you
+#   distribute this file as part of a program that contains a
+#   configuration script generated by Autoconf, you may include it under
+#   the same distribution terms that you use for the rest of that program.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+shlibext=
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+wl=
+if test "$GCC" = yes; then
+  wl='-Wl,'
+else
+  case "$host_os" in
+    aix3* | aix4* | aix5*)
+      wl='-Wl,'
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      wl='-Wl,'
+      ;;
+    irix5* | irix6*)
+      wl='-Wl,'
+      ;;
+    linux*)
+      echo '__INTEL_COMPILER' > conftest.$ac_ext
+      if $CC -E conftest.$ac_ext >/dev/null | grep __INTEL_COMPILER >/dev/null
+      then
+        :
+      else
+        # Intel icc
+        wl='-Qoption,ld,'
+      fi
+      ;;
+    osf3* | osf4* | osf5*)
+      wl='-Wl,'
+      ;;
+    solaris*)
+      wl='-Wl,'
+      ;;
+    sunos4*)
+      wl='-Qoption ld '
+      ;;
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      if test "x$host_vendor" = xsni; then
+        wl='-LD'
+      else
+        wl='-Wl,'
+      fi
+      ;;
+  esac
+fi
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  case "$host_os" in
+    aix3* | aix4* | aix5*)
+      # On AIX, the GNU linker is very broken
+      ld_shlibs=no
+      ;;
+    amigaos*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can use
+      # them.
+      ld_shlibs=no
+      ;;
+    beos*)
+      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    cygwin* | mingw* | pw32*)
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    solaris* | sysv5*)
+      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+        ld_shlibs=no
+      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    sunos4*)
+      hardcode_direct=yes
+      ;;
+    *)
+      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+  esac
+  if test "$ld_shlibs" = yes; then
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+  fi
+else
+  case "$host_os" in
+    aix3*)
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes; then
+        # Neither direct hardcoding nor static linking is supported with a
+        # broken collect2.
+        hardcode_direct=unsupported
+      fi
+      ;;
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+        # On IA64, the linker does run time linking by default, so we don't
+        # have to do anything special.
+        aix_use_runtimelinking=no
+      else
+        aix_use_runtimelinking=no
+        # Test if we are trying to use run time linking or normal
+        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+        # need to do runtime linking.
+        case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+          for ld_flag in $LDFLAGS; do
+            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+              aix_use_runtimelinking=yes
+              break
+            fi
+          done
+        esac
+      fi
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      if test "$GCC" = yes; then
+        case $host_os in aix4.[012]|aix4.[012].*)
+          collect2name=`${CC} -print-prog-name=collect2`
+          if test -f "$collect2name" && \
+            strings "$collect2name" | grep resolve_lib_name >/dev/null
+          then
+            # We have reworked collect2
+            hardcode_direct=yes
+          else
+            # We have old collect2
+            hardcode_direct=unsupported
+            hardcode_minus_L=yes
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_libdir_separator=
+          fi
+        esac
+      fi
+      if test "$aix_use_runtimelinking" = yes; then
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+      else
+        if test "$host_cpu" = ia64; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+        else
+          hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+        fi
+      fi
+      ;;
+    amigaos*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs=no
+      ;;
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      libext=lib
+      ;;
+    darwin* | rhapsody*)
+      hardcode_direct=yes
+      ;;
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+    freebsd2.2*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    freebsd2*)
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    freebsd*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+      hardcode_minus_L=yes # Not in the search PATH, but as the default
+                           # location of the library.
+      ;;
+    irix5* | irix6*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    netbsd*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    newsos6)
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    openbsd*)
+      hardcode_direct=yes
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      else
+        case "$host_os" in
+          openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+            hardcode_libdir_flag_spec='-R$libdir'
+            ;;
+          *)
+            hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+            ;;
+        esac
+      fi
+      ;;
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      ;;
+    osf3*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    osf4* | osf5*)
+      if test "$GCC" = yes; then
+        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+        # Both cc and cxx compiler support -rpath directly
+        hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+    sco3.2v5*)
+      ;;
+    solaris*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      ;;
+    sunos4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    sysv4)
+      if test "x$host_vendor" = xsno; then
+        hardcode_direct=yes # is this really true???
+      else
+        hardcode_direct=no # Motorola manual says yes, but my tests say they lie
+      fi
+      ;;
+    sysv4.3*)
+      ;;
+    sysv5*)
+      hardcode_libdir_flag_spec=
+      ;;
+    uts4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    dgux*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        ld_shlibs=yes
+      fi
+      ;;
+    sysv4.2uw2*)
+      hardcode_direct=yes
+      hardcode_minus_L=no
+      ;;
+    sysv5uw7* | unixware7*)
+      ;;
+    *)
+      ld_shlibs=no
+      ;;
+  esac
+fi
+
+# Check dynamic linker characteristics
+libname_spec='lib$name'
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+case "$host_os" in
+  aix3*)
+    shlibext=so
+    ;;
+  aix4* | aix5*)
+    shlibext=so
+    ;;
+  amigaos*)
+    shlibext=ixlibrary
+    ;;
+  beos*)
+    shlibext=so
+    ;;
+  bsdi4*)
+    shlibext=so
+    sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+    sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+    ;;
+  cygwin* | mingw* | pw32*)
+    case $GCC,$host_os in
+      yes,cygwin*)
+        shlibext=dll.a
+        ;;
+      yes,mingw*)
+        shlibext=dll
+        sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
+        ;;
+      yes,pw32*)
+        shlibext=dll
+        ;;
+      *)
+        shlibext=dll
+        ;;
+    esac
+    ;;
+  darwin* | rhapsody*)
+    shlibext=dylib
+    ;;
+  freebsd1*)
+    ;;
+  freebsd*)
+    shlibext=so
+    ;;
+  gnu*)
+    shlibext=so
+    ;;
+  hpux9* | hpux10* | hpux11*)
+    shlibext=sl
+    ;;
+  irix5* | irix6*)
+    shlibext=so
+    case "$host_os" in
+      irix5*)
+        libsuff= shlibsuff=
+        ;;
+      *)
+        case $LD in
+          *-32|*"-32 ") libsuff= shlibsuff= ;;
+          *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 ;;
+          *-64|*"-64 ") libsuff=64 shlibsuff=64 ;;
+          *) libsuff= shlibsuff= ;;
+        esac
+        ;;
+    esac
+    sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+    sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+    ;;
+  linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+    ;;
+  linux-gnu*)
+    shlibext=so
+    ;;
+  netbsd*)
+    shlibext=so
+    ;;
+  newsos6)
+    shlibext=so
+    ;;
+  openbsd*)
+    shlibext=so
+    ;;
+  os2*)
+    libname_spec='$name'
+    shlibext=dll
+    ;;
+  osf3* | osf4* | osf5*)
+    shlibext=so
+    sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+    sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+    ;;
+  sco3.2v5*)
+    shlibext=so
+    ;;
+  solaris*)
+    shlibext=so
+    ;;
+  sunos4*)
+    shlibext=so
+    ;;
+  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    shlibext=so
+    case "$host_vendor" in
+      motorola)
+        sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+        ;;
+    esac
+    ;;
+  uts4*)
+    shlibext=so
+    ;;
+  dgux*)
+    shlibext=so
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      shlibext=so
+    fi
+    ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_sys_lib_search_path_spec=`echo "X$sys_lib_search_path_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_sys_lib_dlsearch_path_spec=`echo "X$sys_lib_dlsearch_path_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec="$escaped_sys_lib_search_path_spec"
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec="$escaped_sys_lib_dlsearch_path_spec"
+
+EOF

configure.ac

@@ -1,71 +1,127 @@
 # $Id$
 dnl Process this file with autoconf to produce a configure script.
-AC_INIT(nano.c)
-AM_INIT_AUTOMAKE(nano, 1.0.1)
+AC_INIT
+AC_CONFIG_SRCDIR([nano.c])
+AC_PREREQ(2.52)
+AM_INIT_AUTOMAKE(nano, 1.1.12)
 AM_CONFIG_HEADER(config.h:config.h.in)
-ALL_LINGUAS="es de fr it id fi hu ca cs"
+dnl AM_ACLOCAL_INCLUDE(m4)
+ALL_LINGUAS="es de fr it id fi hu ca cs gl uk ru sv nn nl da pl nb ms pt_BR"
 
 dnl Checks for programs.
 AC_PROG_CC
 AC_ISC_POSIX
+AC_SYS_LARGEFILE
 
 dnl Checks for header files.
 AC_HEADER_STDC
-AC_CHECK_HEADERS(fcntl.h unistd.h malloc.h termios.h termio.h limits.h getopt.h regex.h)
+AC_CHECK_HEADERS(fcntl.h getopt.h libintl.h limits.h regex.h termio.h termios.h unistd.h)
 
 dnl options
-AC_ARG_ENABLE(tiny,
-[  --enable-tiny           Disables features for the sake of size
-                          (currently disables detailed help and i18n)],
-[if test x$enableval = xyes; then
-    AC_DEFINE(NANO_SMALL) tiny_support=yes
-    AC_DEFINE(DISABLE_TABCOMP) 
-    AC_DEFINE(DISABLE_SPELLER) 
-    AC_DEFINE(DISABLE_HELP) 
-    AC_DEFINE(DISABLE_JUSTIFY) 
-    AC_DEFINE(DISABLE_BROWSER) 
+AC_ARG_ENABLE(debug, 
+[  --enable-debug          Enable debugging (disabled by default)],
+ [if test x$enableval = xyes; then
+    AC_DEFINE(DEBUG, 1, [Define this to enable nano debug messages and assert warnings.]) 
+    debug_support=yes
  fi])
 
+if test "$debug_support" != "yes"; then
+    AC_DEFINE(NDEBUG, 1, [Shut up the assert warnings :-)]) 
+fi
+
 AC_ARG_ENABLE(extra,
 [  --enable-extra          Enable extra (optional) functions, including easter eggs],
 [if test x$enableval = xyes; then
-    AC_DEFINE(NANO_EXTRA) extra_support=yes
+    AC_DEFINE(NANO_EXTRA, 1, [Define this to enable the extra stuff.]) extra_support=yes
+    AC_DEFINE(ENABLE_MULTIBUFFER, 1, [Define this to enable multiple file buffers.]) multibuffer_support=yes
  fi])
 
-AC_ARG_ENABLE(tabcomp,
-[  --disable-tabcomp       Disables tab completion code for a smaller binary],
+AC_ARG_ENABLE(tiny,
+[  --enable-tiny           Disable features for the sake of size
+                          (currently disables detailed help and i18n)],
+[if test x$enableval = xyes; then
+    AC_DEFINE(NANO_SMALL, 1, [Define this to make the nano executable as small as possible.]) tiny_support=yes
+    AC_DEFINE(DISABLE_BROWSER, 1, [Define this to disable the built-in (crappy) file browser.]) 
+    AC_DEFINE(DISABLE_HELP, 1, [Define this to disable the ^G help menu.]) 
+    AC_DEFINE(DISABLE_JUSTIFY, 1, [Define this to disable the justify routine.]) 
+    AC_DEFINE(DISABLE_MOUSE, 1, [Define this to disable the mouse functions.]) 
+    AC_DEFINE(DISABLE_OPERATINGDIR, 1, [Define this to disable setting of the operating directory (chroot of sorts).]) 
+    AC_DEFINE(DISABLE_SPELLER, 1, [Define this to disable the use(full|less) spelling functions.]) 
+    AC_DEFINE(DISABLE_TABCOMP, 1, [Define to disable the tab completion code Chris worked so hard on!]) 
+ fi])
+
+AC_ARG_ENABLE(browser,
+[  --disable-browser       Disable mini file browser],
  [if test x$enableval != xyes; then
-    AC_DEFINE(DISABLE_TABCOMP) 
+    AC_DEFINE(DISABLE_BROWSER, 1, [Define this to disable the built-in (crappy) file browser.])
+ fi])
+
+AC_ARG_ENABLE(help,
+[  --disable-help          Disable help function (^G)],
+ [if test x$enableval != xyes; then
+    AC_DEFINE(DISABLE_HELP, 1, [Define this to disable the ^G help menu.])
  fi])
 
 AC_ARG_ENABLE(justify,
 [  --disable-justify       Disable justify/unjustify function],
  [if test x$enableval != xyes; then
-    AC_DEFINE(DISABLE_JUSTIFY) 
+    AC_DEFINE(DISABLE_JUSTIFY, 1, [Define this to disable the justify routine.]) 
+ fi])
+
+AC_ARG_ENABLE(mouse,
+[  --disable-mouse         Disable mouse support (and -m flag)],
+ [if test x$enableval != xyes; then
+    AC_DEFINE(DISABLE_MOUSE, 1, [Define this to disable the mouse functions.])
+ fi])
+
+AC_ARG_ENABLE(operatingdir,
+[  --disable-operatingdir  Disable setting of operating directory (chroot of sorts)],
+ [if test x$enableval != xyes; then
+    AC_DEFINE(DISABLE_OPERATINGDIR, 1, [Define this to disable setting of the operating directory (chroot of sorts).])
  fi])
 
 AC_ARG_ENABLE(speller,
-[  --disable-speller       Disables spell checker function],
+[  --disable-speller       Disable spell checker function],
  [if test x$enableval != xyes; then
-    AC_DEFINE(DISABLE_SPELLER) 
+    AC_DEFINE(DISABLE_SPELLER, 1, [Define this to disable the use(full|less) spelling functions.])
  fi])
 
-AC_ARG_ENABLE(help,
-[  --disable-help          Disables help function (^G)],
+AC_ARG_ENABLE(tabcomp,
+[  --disable-tabcomp       Disable tab completion code for a smaller binary],
  [if test x$enableval != xyes; then
-    AC_DEFINE(DISABLE_HELP) 
- fi])
-
-AC_ARG_ENABLE(browser,
-[  --disable-browser       Disables mini file browser],
- [if test x$enableval != xyes; then
-    AC_DEFINE(DISABLE_BROWSER)
+    AC_DEFINE(DISABLE_TABCOMP, 1, [Define to disable the tab completion code Chris worked so hard on!]) 
  fi])
 
 AC_ARG_ENABLE(wrapping,
-[  --disable-wrapping      Disables all wrapping of text (and -w flag)],
+[  --disable-wrapping      Disable all wrapping of text (and -w flag)],
  [if test x$enableval != xyes; then
-    AC_DEFINE(DISABLE_WRAPPING)
+    AC_DEFINE(DISABLE_WRAPPING, 1, [Define this to disable any and all text wrapping.])
+ fi])
+
+AC_ARG_ENABLE(color,
+[  --enable-color          Enable color and syntax highlighting],
+[if test x$enableval = xyes; then
+    AC_DEFINE(ENABLE_NANORC, 1, [Define this to use the .nanorc file.]) nanorc_support=yes
+    AC_DEFINE(ENABLE_COLOR, 1, [Define this to have syntax highlighting, requires ENABLE_NANORC too!]) color_support=yes
+    AC_MSG_WARN([
+
+***********************************************************************
+*** WARNING: Color support is far from perfect, but functional.     ***
+*** Be careful with syntax in your .nanorc or nano may malfunction. ***
+***********************************************************************
+])
+fi])
+
+AC_ARG_ENABLE(multibuffer,
+[  --enable-multibuffer    Enable multiple file buffers],
+[if test x$enableval = xyes; then
+    AC_DEFINE(ENABLE_MULTIBUFFER, 1, [Define this to enable multiple file buffers.]) multibuffer_support=yes
+ fi])
+
+AC_ARG_ENABLE(nanorc,
+[  --enable-nanorc         Enable use of .nanorc file],
+[if test x$enableval = xyes; then
+    AC_DEFINE(ENABLE_NANORC, 1, [Define this to use the .nanorc file.]) nanorc_support=yes
  fi])
 
 AC_MSG_CHECKING([whether to use slang])
@@ -94,7 +150,7 @@ AC_ARG_WITH(slang,
 #include <slcurses.h>
 int main () { SLtt_initialize (NULL); return 0; }],
 		[AC_MSG_RESULT(yes)
-		AC_DEFINE(USE_SLANG)
+		AC_DEFINE(USE_SLANG, 1, [Define to use the slang wrappers for curses instead of native curses.])
 		slang_support=yes
 		if test "$with_slang" != "yes"; then
 		    CURSES_LIB="-L${with_slang}/lib -lslang"
@@ -116,7 +172,7 @@ int main () { SLtt_initialize (NULL); return 0; }],
 #include <slcurses.h>
 int main () { SLtt_initialize (NULL); return 0; }],
 		    [AC_MSG_RESULT(yes)
-		    AC_DEFINE(USE_SLANG)
+		    AC_DEFINE(USE_SLANG, 1, [Define to use the slang wrappers for curses instead of native curses.])
 		    slang_support=yes
 		    if test "$with_slang" != "yes"; then
 			CURSES_LIB="-L${with_slang}/lib -lslang $tcap"
@@ -133,7 +189,7 @@ int main () { SLtt_initialize (NULL); return 0; }],
 #include <slcurses.h>
 int main () { SLtt_initialize (NULL); return 0; }],
 			[AC_MSG_RESULT(yes)
-			AC_DEFINE(USE_SLANG)
+			AC_DEFINE(USE_SLANG, 1, [Define to use the slang wrappers for curses instead of native curses.])
 			slang_support=yes
 			if test "$with_slang" != "yes"; then
 			    CURSES_LIB="-L${with_slang}/lib -lslang $tcap -lm"
@@ -161,7 +217,11 @@ AC_MSG_WARN([*** Can not use slang when cross-compiling])),
     esac], [AC_MSG_RESULT(no)])
 
 dnl Checks for functions
-AC_CHECK_FUNCS(snprintf vsnprintf)
+AC_CHECK_FUNCS(ngettext snprintf vsnprintf)
+if test "x$ac_cv_func_ngettext" = "xno"
+then
+	AC_DEFINE(NO_NGETTEXT, 1, [Defined if ngettext() is unavailable])
+fi
 if test "x$ac_cv_func_snprintf" = "xno" -o "xac_cv_func_vsnprintf" = "xno"
 then
 	AM_PATH_GLIB(1.2.4,,
@@ -217,9 +277,10 @@ else
 fi
 
 
+AC_CHECK_LIB([$CURSES_LIB_NAME], use_default_colors, AC_DEFINE(HAVE_USE_DEFAULT_COLORS, 1, [Define this if your curses library has the use_default_colors command.]))
 if test x$slang_support != xyes; then
-    AC_CHECK_LIB([$CURSES_LIB_NAME], wresize, [AC_DEFINE(HAVE_WRESIZE)])
-    AC_CHECK_LIB([$CURSES_LIB_NAME], resizeterm, [AC_DEFINE(HAVE_RESIZETERM)])
+    AC_CHECK_LIB([$CURSES_LIB_NAME], wresize, AC_DEFINE(HAVE_WRESIZE, 1, [Define this if you have the wresize function in your ncurses-type library.]))
+    AC_CHECK_LIB([$CURSES_LIB_NAME], resizeterm, AC_DEFINE(HAVE_RESIZETERM, 1, [Define this if you have the resizeterm function in your ncurses-type library.]))
 
     # Taken from aumix (can't tell form the variable name?)
     AC_CACHE_CHECK([for private member _use_keypad in WINDOW],
@@ -232,7 +293,7 @@ if test x$slang_support != xyes; then
     aumix_cv_struct_window_usekeypad=yes, aumix_cv_struct_window_usekeypad=no)])
     
     if test $aumix_cv_struct_window_usekeypad = yes; then
-	AC_DEFINE(HAVE_USEKEYPAD)
+	AC_DEFINE(HAVE_USEKEYPAD, 1, [Define this if your curses lib has the _use_keypad flag.])
     fi
 fi
 
@@ -240,8 +301,6 @@ dnl Parse any configure options
 
 LIBS="$LIBS $CURSES_LIB"
 
-AC_ARG_ENABLE(debug, [  --enable-debug          Enable debugging (def disabled)],)
-
 AC_SUBST(CURSES_LIB)
 
 if test "x$glib_cflags" != "x"
@@ -254,6 +313,7 @@ then
 fi
 
 dnl i18n stuff - pretty incomplete for now
-AM_GNU_GETTEXT
+AM_GNU_GETTEXT([external])
 
-AC_OUTPUT([Makefile intl/Makefile po/Makefile.in])
+AC_CONFIG_FILES([Makefile m4/Makefile po/Makefile.in nano.spec])
+AC_OUTPUT

cut.c

@@ -2,10 +2,10 @@
 /**************************************************************************
  *   cut.c                                                                *
  *                                                                        *
- *   Copyright (C) 1999 Chris Allegretta                                  *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
  *   This program is free software; you can redistribute it and/or modify *
  *   it under the terms of the GNU General Public License as published by *
- *   the Free Software Foundation; either version 1, or (at your option)  *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
  *   any later version.                                                   *
  *                                                                        *
  *   This program is distributed in the hope that it will be useful,      *
@@ -19,34 +19,30 @@
  *                                                                        *
  **************************************************************************/
 
+#include "config.h"
+
 #include <stdlib.h>
 #include <string.h>
 #include <stdio.h>
-#include "config.h"
+#include <assert.h>
 #include "proto.h"
 #include "nano.h"
 
-#ifndef NANO_SMALL
-#include <libintl.h>
-#define _(string) gettext(string)
-#else
-#define _(string) (string)
-#endif
+static int marked_cut;		/* Is the cutbuffer from a mark? */
+static filestruct *cutbottom = NULL; /* Pointer to end of cutbuffer */
 
-static int marked_cut;		/* Is the cutbuffer from a mark */
-static filestruct *cutbottom = NULL;	/* Pointer to end of cutbuffer */
-
-void add_to_cutbuffer(filestruct * inptr)
+filestruct *get_cutbottom(void)
 {
-    filestruct *tmp;
+    return cutbottom;
+}
 
+void add_to_cutbuffer(filestruct *inptr)
+{
 #ifdef DEBUG
     fprintf(stderr, _("add_to_cutbuffer called with inptr->data = %s\n"),
 	    inptr->data);
 #endif
 
-    totsize -= strlen(inptr->data);
-    tmp = cutbuffer;
     if (cutbuffer == NULL) {
 	cutbuffer = inptr;
 	inptr->prev = NULL;
@@ -60,104 +56,170 @@ void add_to_cutbuffer(filestruct * inptr)
 }
 
 #ifndef NANO_SMALL
-void cut_marked_segment(filestruct * top, int top_x, filestruct * bot,
-			int bot_x)
+/* Cut a marked segment instead of a whole line.
+ * The first cut character is top->data[top_x].  Unless top == bot, the
+ * last cut line has length bot_x.  That is, if bot_x > 0 then we cut to
+ * bot->data[bot_x - 1].
+ *
+ * destructive is whether to actually modify the file structure, if not
+ * then just copy the buffer into cutbuffer and don't pull it from the
+ * file.
+ *
+ * If destructive, then we maintain totsize, totlines, filebot, the
+ * magic line, and line numbers.  Also, we set current and current_x so
+ * the cursor will be on the first character after what was cut.  We do
+ * not do any screen updates. */
+void cut_marked_segment(filestruct *top, size_t top_x, filestruct *bot,
+			size_t bot_x, int destructive)
 {
     filestruct *tmp, *next;
-    char *tmpstr;
+    size_t newsize;
 
-    /* Set up the beginning of the cutbuffer */
-    tmp = copy_node(top);
-    tmpstr = nmalloc(strlen(&top->data[top_x]) + 1);
-    strcpy(tmpstr, &top->data[top_x]);
-    free(tmp->data);
-    tmp->data = tmpstr;
-
-    /* Chop off the end of the first line */
-    tmpstr = nmalloc(top_x + 1);
-    strncpy(tmpstr, top->data, top_x);
-    free(top->data);
-    top->data = tmpstr;
-
-    do {
-	next = tmp->next;
-	add_to_cutbuffer(tmp);
-	totlines--;
-	totsize--;		/* newline (add_to_cutbuffer doesn't count newlines) */
-	tmp = next;
-    }
-    while (next != bot && next != NULL);
-
-    dump_buffer(cutbuffer);
-    if (next == NULL)
+    if (top == bot && top_x == bot_x)
 	return;
-    /* Now, paste bot[bot_x] into top[top_x] */
-    tmpstr = nmalloc(strlen(top->data) + strlen(&bot->data[bot_x]));
-    strncpy(tmpstr, top->data, top_x);
-    strcpy(&tmpstr[top_x], &bot->data[bot_x]);
-    free(top->data);
-    top->data = tmpstr;
+    assert(top != NULL && bot != NULL);
 
-    null_at(bot->data, bot_x);
-    next = bot->next;
+    /* Make top be no later than bot. */
+    if (top->lineno > bot->lineno) {
+	filestruct *swap = top;
+	int swap2 = top_x;
 
-    /* We explicitly don't decrement totlines here because we don't snarf
-     * up a newline when we're grabbing the last line of the mark.  For
-     * the same reason we don't do an extra totsize decrement */
+	top = bot;
+	bot = swap;
 
-    add_to_cutbuffer(bot);
-    top->next = next;
-    if (next != NULL)
-	next->prev = top;
+	top_x = bot_x;
+	bot_x = swap2;
+    } else if (top == bot && top_x > bot_x) {
+	/* And bot_x can't be an earlier character than top_x. */
+	int swap = top_x;
 
-    dump_buffer(cutbuffer);
-    renumber(top);
-    current = top;
-    current_x = top_x;
+	top_x = bot_x;
+	bot_x = swap;
+    }
 
-    /* If we're hitting the end of the buffer we should clean that up. */
-    if (bot == filebot) {
-	if (next != NULL) {
-	    filebot = next;
+    /* Make the first cut line manually. */
+    tmp = copy_node(top);
+    newsize = (top == bot ? bot_x - top_x : strlen(top->data + top_x));
+    memmove(tmp->data, top->data + top_x, newsize);
+    null_at(&tmp->data, newsize);
+    add_to_cutbuffer(tmp);
+
+    /* And make the remainder line manually too. */
+    if (destructive) {
+	current_x = top_x;
+	totsize -= newsize;
+	totlines -= bot->lineno - top->lineno;
+
+	newsize = top_x + strlen(bot->data + bot_x) + 1;
+	if (top == bot) {
+	    /* In this case, the remainder line is shorter, so we must
+	       move text from the end forward first. */
+	    memmove(top->data + top_x, bot->data + bot_x,
+			newsize - top_x);
+	    top->data = (char *)nrealloc(top->data,
+					sizeof(char) * newsize);
 	} else {
-	    filebot = top;
+	    totsize -= bot_x + 1;
+
+	    /* Here, the remainder line might get longer, so we realloc
+	       it first. */
+	    top->data = (char *)nrealloc(top->data,
+					sizeof(char) * newsize);
+	    memmove(top->data + top_x, bot->data + bot_x,
+			newsize - top_x);
+	}
+    }
+
+    if (top == bot) {
+#ifdef DEBUG
+	dump_buffer(cutbuffer);
+#endif
+	return;
+    }
+
+    tmp = top->next;
+    while (tmp != bot) {
+	next = tmp->next;
+	if (!destructive)
+	    tmp = copy_node(tmp);
+	else
+	    totsize -= strlen(tmp->data) + 1;
+	add_to_cutbuffer(tmp);
+	tmp = next;
+    }
+
+    /* Make the last cut line manually. */
+    tmp = copy_node(bot);
+    null_at(&tmp->data, bot_x);
+    add_to_cutbuffer(tmp);
+#ifdef DEBUG
+    dump_buffer(cutbuffer);
+#endif
+
+    if (destructive) {
+	top->next = bot->next;
+	if (top->next != NULL)
+	    top->next->prev = top;
+	delete_node(bot);
+	renumber(top);
+	current = top;
+	if (bot == filebot) {
+	    filebot = top;
+	    assert(bot_x == 0);
+	    if (top_x > 0)
+		new_magicline();
 	}
     }
-    if (top->lineno < edittop->lineno)
-	edit_update(top, CENTER);
 }
 #endif
 
 int do_cut_text(void)
 {
-    filestruct *tmp, *fileptr = current;
+    filestruct *fileptr;
 #ifndef NANO_SMALL
-    char *tmpstr;
-    int newsize, cuttingtoend = 0;
+    int dontupdate = 0;
 #endif
 
-    check_statblank();
-    if (fileptr == NULL || fileptr->data == NULL)
-	return 0;
+    assert(current != NULL && current->data != NULL);
 
-    tmp = fileptr->next;
+    check_statblank();
 
     if (!ISSET(KEEP_CUTBUFFER)) {
 	free_filestruct(cutbuffer);
 	cutbuffer = NULL;
-
+	marked_cut = 0;
 #ifdef DEBUG
 	fprintf(stderr, _("Blew away cutbuffer =)\n"));
 #endif
     }
 
-    /* Must let cutbuffer get blown away first before we do this... */
-    if (fileptr == filebot && !ISSET(MARK_ISSET))
+    /* You can't cut the magic line except with the mark.  But
+       trying does clear the cutbuffer if KEEP_CUTBUFFER is not set. */
+    if (current == filebot
+#ifndef NANO_SMALL
+			&& !ISSET(MARK_ISSET)
+#endif
+						)
 	return 0;
 
 #ifndef NANO_SMALL
     if (ISSET(CUT_TO_END) && !ISSET(MARK_ISSET)) {
-	if (current_x == strlen(current->data)) {
+	assert(current_x >= 0 && current_x <= strlen(current->data));
+
+	if (current->data[current_x] == '\0') {
+	    /* If the line is empty and we didn't just cut a non-blank
+	       line, create a dummy line and add it to the cutbuffer */
+	    if (marked_cut != 1 && current->next != filebot) {
+		filestruct *junk = make_new_node(current);
+
+	        junk->data = charalloc(1);
+		junk->data[0] = '\0';
+		add_to_cutbuffer(junk);
+#ifdef DEBUG
+		dump_buffer(cutbuffer);
+#endif
+	    }
+
 	    do_delete();
 	    SET(KEEP_CUTBUFFER);
 	    marked_cut = 2;
@@ -168,109 +230,69 @@ int do_cut_text(void)
 
 	    mark_beginx = strlen(current->data);
 	    mark_beginbuf = current;
-	    cuttingtoend = 1;
+	    dontupdate = 1;
 	}
     }
-    if (ISSET(MARK_ISSET)) {
-	if (current->lineno == mark_beginbuf->lineno) {
-	    tmp = copy_node(current);
-	    newsize = abs(mark_beginx - current_x) + 1;
 
-	    tmpstr = nmalloc(newsize + 1);
-	    if (current_x < mark_beginx) {
-		strncpy(tmpstr, &current->data[current_x], newsize);
-		memmove(&current->data[current_x],
-			&current->data[mark_beginx],
-			strlen(&current->data[mark_beginx]) + 1);
-	    } else {
-		strncpy(tmpstr, &current->data[mark_beginx], newsize);
-		memmove(&current->data[mark_beginx],
-			&current->data[current_x],
-			strlen(&current->data[current_x]) + 1);
-		current_x = mark_beginx;
-		update_cursor();
-	    }
-	    tmpstr[newsize - 1] = 0;
-	    tmp->data = tmpstr;
-	    add_to_cutbuffer(tmp);
-	    dump_buffer(cutbuffer);
-	    align(&current->data);
-	} else if (current->lineno < mark_beginbuf->lineno)
-	    cut_marked_segment(current, current_x, mark_beginbuf,
-			       mark_beginx);
-	else
-	    cut_marked_segment(mark_beginbuf, mark_beginx, current,
-			       current_x);
+    if (ISSET(MARK_ISSET)) {
+	/* Don't do_update() and move the screen position if the marked
+	   area lies entirely within the screen buffer */
+	dontupdate |= current->lineno >= edittop->lineno &&
+			current->lineno <= editbot->lineno &&
+			mark_beginbuf->lineno >= edittop->lineno &&
+			mark_beginbuf->lineno <= editbot->lineno;
+	cut_marked_segment(current, current_x, mark_beginbuf,
+				mark_beginx, 1);
 
 	placewewant = xplustabs();
 	UNSET(MARK_ISSET);
 
 	marked_cut = 1;
 	set_modified();
-	if (cuttingtoend)
+	if (dontupdate) {
+	    fix_editbot();
 	    edit_refresh();
-	else
+	} else
 	    edit_update(current, CENTER);
 
 	return 1;
-#else
-    if (0) {
-#endif
-    } else if (fileptr == fileage) {
-	/* we're cutting the first line */
-	if (fileptr->next != NULL) {
-	    fileptr = fileptr->next;
-	    tmp = fileptr;
-	    fileage = fileptr;
-	    add_to_cutbuffer(fileptr->prev);
-	    totsize--;		/* get the newline */
-	    totlines--;
-	    fileptr->prev = NULL;
-	    current = fileptr;
-	    edit_update(fileage, CENTER);
-	} else {
-	    add_to_cutbuffer(fileptr);
-	    fileage = make_new_node(NULL);
-	    fileage->data = nmalloc(1);
-	    fileage->data[0] = '\0';
-	    current = fileage;
-	}
-    } else {
-	if (fileptr->prev != NULL)
-	    fileptr->prev->next = fileptr->next;
-
-	if (fileptr->next != NULL) {
-	    (fileptr->next)->prev = fileptr->prev;
-	    current = fileptr->next;
-	    totlines--;
-	    totsize--;		/* get the newline */
-	}
-	/* No longer an else here, because we never get here anymore...
-	   No need to cut the magic line, as it's empty */
-	add_to_cutbuffer(fileptr);
     }
+#endif /* !NANO_SMALL */
+
+    totlines--;
+    totsize -= strlen(current->data) + 1;
+    fileptr = current;
+    current = current->next;
+    current->prev = fileptr->prev;
+    add_to_cutbuffer(fileptr);
+#ifdef DEBUG
+    dump_buffer(cutbuffer);
+#endif
+	
+    if (fileptr == fileage)
+	fileage = current;
+    else
+	current->prev->next = current;
 
     if (fileptr == edittop)
 	edittop = current;
 
+    renumber(current);
     edit_refresh();
-
-    dump_buffer(cutbuffer);
-    reset_cursor();
-
     set_modified();
     marked_cut = 0;
     current_x = 0;
     placewewant = 0;
-    update_cursor();
-    renumber(tmp);
+    reset_cursor();
     SET(KEEP_CUTBUFFER);
     return 1;
 }
 
 int do_uncut_text(void)
 {
-    filestruct *tmp = current, *fileptr = current, *newbuf, *newend;
+    filestruct *tmp = current, *fileptr = current;
+    filestruct *newbuf = NULL;
+    filestruct *newend = NULL;
 #ifndef NANO_SMALL
     char *tmpstr, *tmpstr2;
     filestruct *hold = current;
@@ -282,40 +304,52 @@ int do_uncut_text(void)
     if (cutbuffer == NULL || fileptr == NULL)
 	return 0;		/* AIEEEEEEEEEEEE */
 
-    newbuf = copy_filestruct(cutbuffer);
-    for (newend = newbuf; newend->next != NULL && newend != NULL;
-	 newend = newend->next) {
-	totlines++;
+#ifndef NANO_SMALL
+    if (!marked_cut || cutbuffer->next != NULL)
+#endif
+    {
+	newbuf = copy_filestruct(cutbuffer);
+	for (newend = newbuf; newend->next != NULL && newend != NULL;
+		newend = newend->next)
+	    totlines++;
     }
 
     /* Hook newbuf into fileptr */
 #ifndef NANO_SMALL
     if (marked_cut) {
+	int recenter_me = 0;
+	    /* Should we eventually use edit_update(CENTER)? */
+
 	/* If there's only one line in the cutbuffer */
 	if (cutbuffer->next == NULL) {
-	    tmpstr =
-		nmalloc(strlen(current->data) + strlen(cutbuffer->data) +
-			1);
-	    strncpy(tmpstr, current->data, current_x);
-	    strcpy(&tmpstr[current_x], cutbuffer->data);
-	    strcat(tmpstr, &current->data[current_x]);
-	    free(current->data);
-	    current->data = tmpstr;
-	    current_x += strlen(cutbuffer->data);
-	    totsize += strlen(cutbuffer->data);
+	    size_t buf_len = strlen(cutbuffer->data);
+	    size_t cur_len = strlen(current->data);
+
+	    current->data = nrealloc(current->data, cur_len + buf_len + 1);
+	    memmove(current->data + current_x + buf_len,
+			current->data + current_x, cur_len - current_x + 1);
+	    strncpy(current->data + current_x, cutbuffer->data, buf_len);
+		/* Use strncpy to not copy the terminal '\0'. */
+
+	    current_x += buf_len;
+	    totsize += buf_len;
+	    /* If we've uncut a line, make sure there's a magicline after
+	       it */
+	    if (current->next == NULL)
+		new_magicline();
 
 	    placewewant = xplustabs();
 	    update_cursor();
 	} else {		/* yuck -- no kidding! */
 	    tmp = current->next;
 	    /* New beginning */
-	    tmpstr = nmalloc(current_x + strlen(newbuf->data) + 1);
+	    tmpstr = charalloc(current_x + strlen(newbuf->data) + 1);
 	    strncpy(tmpstr, current->data, current_x);
 	    strcpy(&tmpstr[current_x], newbuf->data);
 	    totsize += strlen(newbuf->data) + strlen(newend->data) + 1;
 
 	    /* New end */
-	    tmpstr2 = nmalloc(strlen(newend->data) +
+	    tmpstr2 = charalloc(strlen(newend->data) +
 			      strlen(&current->data[current_x]) + 1);
 	    strcpy(tmpstr2, newend->data);
 	    strcat(tmpstr2, &current->data[current_x]);
@@ -334,8 +368,8 @@ int do_uncut_text(void)
 	    newend->next = tmp;
 
 	    /* If tmp isn't null, we're in the middle: update the
-	     * prev pointer.  If it IS null, we're at the end, update
-	     * the filebot pointer */
+	       prev pointer.  If it IS null, we're at the end; update
+	       the filebot pointer */
 
 	    if (tmp != NULL)
 		tmp->prev = newend;
@@ -351,48 +385,55 @@ int do_uncut_text(void)
 	    for (tmp = current->next; tmp != newend; tmp = tmp->next)
 		totsize += strlen(tmp->data) + 1;
 
-	    i = editbot->lineno;
-
 	    current = newend;
-	    if (i <= newend->lineno)
-		edit_update(current, CENTER);
+	    if (editbot->lineno < newend->lineno)
+		recenter_me = 1;
 	}
 
 	/* If marked cut == 2, that means that we're doing a cut to end
 	   and we don't want anything else on the line, so we have to
-	   screw up all the work we just did and separate the line.  There
-	   must be a better way to do this, but not at 1AM on a work night. */
+	   screw up all the work we just did and separate the line.
+	   There must be a better way to do this, but not at 1AM on a
+	   work night. */
 
-	if (marked_cut == 2 && current_x != strlen(current->data)) {
+	if (marked_cut == 2) {
 	    tmp = make_new_node(current);
-	    tmp->data = nmalloc(strlen(&current->data[current_x]) + 1);
+	    tmp->data = charalloc(strlen(&current->data[current_x]) + 1);
 	    strcpy(tmp->data, &current->data[current_x]);
 	    splice_node(current, tmp, current->next);
-	    null_at(current->data, current_x);
+	    null_at(&current->data, current_x);
 	    current = current->next;
 	    current_x = 0;
 	    placewewant = 0;
+
+	    /* Extra line added, update stuff */
+	    totlines++;
+	    totsize++;
 	}
 	/* Renumber from BEFORE where we pasted ;) */
 	renumber(hold);
 
+#ifdef DEBUG
 	dump_buffer(fileage);
 	dump_buffer(cutbuffer);
-	set_modified();
-	edit_refresh();
-	return 0;
-#else
-    if (0) {
 #endif
-    } else if (fileptr != fileage) {
+	set_modified();
+	if (recenter_me)
+	    edit_update(current, CENTER);
+	else
+	    edit_refresh();
+	UNSET(KEEP_CUTBUFFER);
+	return 0;
+    }
+#endif
+
+    if (fileptr != fileage) {
 	tmp = fileptr->prev;
 	tmp->next = newbuf;
 	newbuf->prev = tmp;
-	totlines++;		/* Unmarked uncuts don't split lines */
-    } else {
+    } else
 	fileage = newbuf;
-	totlines++;		/* Unmarked uncuts don't split lines */
-    }
+    totlines++;		/* Unmarked uncuts don't split lines */
 
     /* This is so uncutting at the top of the buffer will work => */
     if (current_y == 0)
@@ -402,7 +443,7 @@ int do_uncut_text(void)
     newend->next = fileptr;
     fileptr->prev = newend;
 
-    /* recalculate size *sigh* */
+    /* Recalculate size *sigh* */
     for (tmp = newbuf; tmp != fileptr; tmp = tmp->next)
 	totsize += strlen(tmp->data) + 1;
 
@@ -410,11 +451,14 @@ int do_uncut_text(void)
     renumber(newbuf);
     if (i < newend->lineno)
 	edit_update(fileptr, CENTER);
+    else
+	edit_refresh();
 
-    dump_buffer_reverse(fileptr);
+#ifdef DEBUG
+    dump_buffer_reverse();
+#endif
 
     set_modified();
     UNSET(KEEP_CUTBUFFER);
-    edit_refresh();
     return 1;
 }

faq.html

@@ -24,7 +24,7 @@ nano?</a></font>
 TIP?</a></font>
 <br><font color="#330000"><a href="#1.6">1.6. What is the current version
 of nano?</a></font>
-<br><font color="#330000"><a href="#1.7">1.7. I want to read the man page
+<br><font color="#330000"><a href="#1.7">1.7. I want to read the manpage
 without having to download the program!</a></font></blockquote>
 
 <h2>
@@ -45,14 +45,18 @@ packages.</a></font>
 RPM or DEB package?</a></font>
 <br><font color="#330000"><a href="#3.2">3.2. Compiling from source: WHAT
 THE HECK DO I DO NOW?</a></font>
-<br><font color="#330000"><a href="#3.2">3.3. Why does everything go into
+<br><font color="#330000"><a href="#3.3">3.3. Why does everything go into
 /usr/local?</a></font>
 <br><font color="#330000"><a href="#3.4">3.4. I get errors about 'bindtextdomain',
 'gettext' and/or 'gettextdomain'.&nbsp; What can I do about it?</a></font>
 <br><font color="#330000"><a href="#3.5">3.5. Nano should automatically 
 run strip on the binary when installing it!</a></font>
 <br><font color="#330000"><a href="#3.6">3.6. How can I make the
-executable smaller?  This is too bloated!</a></font></blockquote>
+executable smaller?  This is too bloated!</a></font>
+<br><font color="#330000"><a href="#3.7">3.7. Tell me more about this
+multibuffer stuff!</a></font>
+<br><font color="#330000"><a href="#3.8">3.8. How do I make a .nanorc file
+that nano will read when I start it?</a></font></blockquote>
 
 <h2>
 <font color="#330000"><a href="#4">4. Running</a></font></h2>
@@ -63,11 +67,11 @@ bucky/meta key doesn't seem to work!&nbsp; What can I do?</a></font>
 &lt;insert keystroke here>!</a></font>
 <br><font color="#330000"><a href="#4.3">4.3. Nano crashes when I resize
 my window.&nbsp;&nbsp; How can I fix that?</a></font>
-<br><font color="#330000"><a href="#4.4">4.4. Why does nano show ^\ and
-^_ in the shortcut list instead of ^G and ^J?</a></font>
+<br><font color="#330000"><a href="#4.4">4.4. Why does nano show ^\
+in the shortcut list instead of ^J?</a></font>
 <br><font color="#330000"><a href="#4.5">4.5. When I type in a
 search string, the string I last searched for is already in front of
-my cursor!  !What happened?!</a></font>
+my cursor!  What happened?!</a></font>
 <br><font color="#330000"><a href="#4.6">4.6. I get the message "NumLock
 glitch detected.  Keypad will malfunction with NumLock off." What
 gives?</a></font>
@@ -90,7 +94,7 @@ nano instead of Pico?</a></font>
 <br><font color="#330000"><a href="#6.2">6.2. Why should I use Pico instead
 of nano?</a></font>
 <br><font color="#330000"><a href="#6.3">6.3. What is so bad about the
-PINE license?</a></font>
+Pine license?</a></font>
 <br><font color="#330000"><a href="#6.4">6.4. Okay, well what mail program
 should I use then?</a></font>
 <br><font color="#330000"><a href="#6.5">6.5. Why doesn't UW simply change
@@ -138,7 +142,7 @@ it is useful enough it will be included in future versions.</font></blockquote>
 <a NAME="1.3"></a><font color="#330000">1.3. What is GNU nano?</font></h2>
 
 <blockquote><font color="#330000">GNU Nano is designed to be a free
-replacement for the Pico text editor, part of the PINE email suite from <a
+replacement for the Pico text editor, part of the Pine email suite from <a
 href="http://www.washington.edu/pine">The University of
 Washington</a>.&nbsp; It aims to "emulate Pico as closely as possible and
 perhaps include extra functionality.</font></blockquote>
@@ -156,8 +160,8 @@ to Unix flocked to Pico and Pine because of their well organized, easy
 to use interfaces.&nbsp; With the proliferation of GNU/Linux in the mid to
 late 90's, many University students became intimately familiar with the
 strengths (and weaknesses) of Pine and Pico.</font>
-<p><b><font color="#330000">Then came debian...</font></b>
-<p><font color="#330000">The <a href="http://www.debian.org">debian GNU/Linux</a>
+<p><b><font color="#330000">Then came Debian...</font></b>
+<p><font color="#330000">The <a href="http://www.debian.org">Debian GNU/Linux</a>
 distribution, known for its strict standards in distributing truly "free"
 software (i.e. had no restrictions on redistribution), would not include
 a binary package for Pine or Pico.&nbsp; Many people had a serious dilemma:&nbsp;
@@ -167,9 +171,9 @@ sense of the word.</font>
 <p><b><font color="#330000">The event...</font></b>
 <p><font color="#330000">It was in late 1999 when Chris Allegretta (our
 hero) was yet again complaining to himself about the less-than-perfect
-license Pico was distributed under, the 1.0.1 makefiles that came with
+license Pico was distributed under, the 1000 makefiles that came with
 it and how just a few small improvements could make it the Best Editor
-in the World (TM).&nbsp; Having been a convert from Slackware to debian,
+in the World (TM).&nbsp; Having been a convert from Slackware to Debian,
 he missed having a simple binary package that included Pine and Pico, and
 had grown tired of downloading them himself.</font>
 <p><font color="#330000">Finally something snapped inside and Chris coded
@@ -177,12 +181,11 @@ and hacked like a madman for many hours straight one weekend to make a
 (barely usable) Pico clone, at the time called TIP (Tip Isn't Pico).&nbsp;
 The program could not be invoked without a filename, could not save files,
 had no help menu, spell checker, and so forth.&nbsp; But over time it improved,
-and with the help of a few great coders it matured to the almost stable
+and with the help of a few great coders it matured to the (hopefully) stable
 state it is today.
 <p><font color="#330000">In February 2001, nano has been declared an
-official GNU program by Richard Stallman.  Nano is also nearing its 1.0
-release as of this writing (Valentine's Day 2001).
- </font></blockquote>
+official GNU program by Richard Stallman.  Nano also reached its first
+production release on March 22, 2001.</font></blockquote>
 
 <h2>
 <a NAME="1.5"></a><font color="#330000">1.5. Why the name change from TIP?</font></h2>
@@ -200,7 +203,7 @@ nano was developed).</font></blockquote>
 of nano?</font></h2>
 
 <blockquote><font color="#330000">The current version of nano *should*
-be 1.0.1.&nbsp; Of course you should always check the nano hompage to
+be 1.1.12.&nbsp; Of course you should always check the nano homepage to
 see what the latest and greatest version is.</font></blockquote>
 
 <h2>
@@ -226,12 +229,9 @@ at the following fine web and ftp sites:</font>
 
 <li>
 <font color="#330000"><a href="http://www.ewtoo.org/~astyanax/nano/dist">http://www.ewtoo.org/~astyanax/nano/dist</a></font></li>
-
 <li>
-<font color="#330000"><a href="ftp://ftp.nano-editor.org/pub/nano">ftp://ftp.nano-editor.org/pub/nano</a></font></li>
+<font color="#330000"><a href="ftp://ftp.gnu.org/pub/gnu/nano">ftp://ftp.gnu.org/pub/gnu/nano</a></font></li>
 
-<li>
-<font color="#330000"><a href="ftp://nano.sourceforge.net/pub/nano/">ftp://nano.sourceforge.net/pub/nano</a></font></li>
 </ul>
 </blockquote>
 
@@ -247,39 +247,40 @@ packages.</font></h2>
 <li>
 <font color="#330000"><a href="http://www.ewtoo.org/~astyanax/nano/dist/RPMS">http://www.ewtoo.org/~astyanax/nano/dist/RPMS</a></font></li>
 
-<li>
-<font color="#330000"><a href="ftp://ftp.nano-editor.org/pub/nano/RPMS">ftp://ftp.nano-editor.org/pub/nano/RPMS</a></font></li>
-
-<li>
-<font color="#330000"><a href="ftp://nano.sourceforge.net/pub/nano/RPMS">ftp://nano.sourceforge.net/pub/nano/RPMS</a></font></li>
 </ul>
 <font color="#330000">Additionally, check out the Redhat contribs section
 at:</font>
 <ul>
 <li>
-<font color="#330000"><a href="http://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386">http://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
+<font color="#330000"><a href="http://distro.ibiblio.org/pub/Linux/distributions/redhat/contrib/libc6/i386">http://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
 
 <li>
-<font color="#330000"><a href="ftp://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386">ftp://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
+<font color="#330000"><a href="ftp://distro.ibiblio.org/pub/Linux/distributions/redhat/contrib/libc6/i386">ftp://metalab.unc.edu/pub/Linux/distributions/redhat/contrib/libc6/i386</a></font></li>
 </ul>
 </blockquote>
 
 <h2>
 <a NAME="2.3"></a><font color="#330000">2.3. Debian (.deb) packages.</font></h2>
 
-<blockquote><font color="#330000">For debian users, you can check out the
+<blockquote><font color="#330000">For Debian users, you can check out the
 current nano packages for:</font>
 <ul>
 <li>
 <font color="#330000"><a href="http://www.debian.org/Packages/stable/editors/nano.html">stable</a></font></li>
 
+<li>
+<font color="#330000"><a href="http://www.debian.org/Packages/testing/editors/nano.html">testing</a></font></li>
+
 <li>
 <font color="#330000"><a href="http://www.debian.org/Packages/unstable/editors/nano.html">unstable</a></font></li>
 </ul>
+<p><font color="#330000">You can also have a look at the</font>
+<font color="#330000"><a href="ftp://ftp.debian.org/debian/pool/main/n/nano/">Package Pool</a> to see all the available binary and source packages.</font></p>
+
 <font color="#330000">Note that versions &lt; 0.9.10 are probably not for
-those wanting to get serious work done, so until the stable distribution
-has an updated version of nano, you are best off using the one in unstable
-for now.</font></blockquote>
+those wanting to get serious work done, so if you are using Debian 2.2, check
+that you have updated to 2.2r3, which comes with nano 0.9.23. If you're 
+tracking unstable, you probably have the newest version already.</font></blockquote>
 
 <h2>
 <a NAME="2.4"></a><font color="#330000">2.4. By CVS (for the brave).</font></h2>
@@ -288,7 +289,7 @@ for now.</font></blockquote>
 of nano, you can use CVS to download the current source code.&nbsp; <b>Note:</b>
 believe it or not, by downloading code that has not yet stabilized into
 an official release, there could quite possibly be bugs, in fact the code
-may not even compile!&nbsp; Anyway, see <a href="https://sourceforge.net/cvs/?group_id=1304">the
+may not even compile!&nbsp; Anyway, see <a href="http://savannah.gnu.org/cvs/?group_id=1025">the
 nano CVS page</a> for info on anonymous CVS access to the nano source.</font></blockquote>
 
 <hr WIDTH="100%">
@@ -341,7 +342,7 @@ install</b>.</font></blockquote>
 'gettext' and/or 'gettextdomain'.&nbsp; What can I do about it?</font></h2>
 
 <blockquote><font color="#330000">Try doing a <b>./configure --with-included-gettext</b>
-and see if that solves your problem.&nbsp; You make need to do a <b>make
+and see if that solves your problem.&nbsp; You may need to do a <b>make
 clean ; make</b> to get it to work fully.</font></blockquote>
 
 <h2>
@@ -367,6 +368,9 @@ list:
 <b>--disable-speller</b>       Disables spell checker function
 <b>--disable-help</b>          Disables help function (^G)
 <b>--disable-browser</b>       Disables mini file browser
+<b>--disable-wrapping</b>      Disables all wrapping of text (and -w flag)
+<b>--disable-mouse</b>         Disables mouse support (and -m flag)
+<b>--disable-operatingdir</b>  Disable setting of operating directory
 </pre><br>
 There's also the <b>--enable-tiny</b> option which disables everything
 above, as well as some larger chunks of the program (like the marker code
@@ -376,8 +380,49 @@ disable internationalization and save a few K to a few dozen K depending
 on if you have locale support on your system. And finally there's always
 good old <b>strip</b> to strip all debugging code and code that exists in
 libraries on your system.
-</font></blockquote> <hr WIDTH="100%"> <h1>
-<a NAME="4"></a><font color="#330000">4. Running</font></h1>
+<p>If, in the other hand, you can't live without bells and whistles, you could
+try:
+<pre>
+<b>--enable-extra</b>          Enable extra functions, including easter eggs
+<b>--enable-nanorc</b>         Enable use of .nanorc file
+<b>--enable-color</b>          Enables color and syntax highlighting
+<b>--enable-multibuffer</b>    Enables having multiple file buffers open
+</font></blockquote>
+
+<h2>
+<a NAME="3.7"></a><font color="#330000">
+3.7. Tell me more about this multibuffer stuff!</font></h2>
+
+<blockquote><font color="#330000"> To use multiple file buffers, you must
+be using nano 1.1.12 or newer, and you must have configured nano with
+<b>--enable-multibuffer</b> or <b>--enable-extra</b> (use nano -V to check).
+Then when you want to enable inserting a file into its own buffer instead of
+into the current file, just hit <b>Meta-F</b>, then insert the file as normal
+with <b>^R</b>.  If you always want files to be loaded into their own buffers,
+use the <b>--multibuffer</b> or <b>-F</b> flag when you invoke nano. <P>
+
+You can move between the buffers you have open with the <b>Meta-&lt;</b> and
+<b>Meta-&gt;</b> keys, or more easily with <b>Meta-,</b> and <b>Meta-.</b>
+(clear as mud, right? =-). When you have more than one file buffer open,
+the ^X shortcut will say "Close", instead of the normal "Exit" when only one
+buffer is open. 
+</font></blockquote>
+
+<h2>
+<a NAME="3.8"></a><font color="#330000">
+3.8. How do I make a .nanorc file that nano will read when I start it?</font></h2>
+
+<blockquote><font color="#330000"> It's not hard at all!  But, your version
+of nano must have been compiled with <b>--enable-nanorc</b>, and again must
+be version 1.1.12 or newer (use nano -V to check your version and compiled
+features).  Then simply copy the <b>nanorc.sample</b>
+that came with the nano source or your nano package (most likely in
+/usr/doc/nano) to .nanorc in your home directory. If you didn't get one,
+the syntax is simple.  Flags are turned on and off by using the word
+<b>set</b> and the getopt_long flag for the feature, for example "set
+pico" or "set nowrap". </font></blockquote> <hr WIDTH="100%">
+
+<h1><a NAME="4"></a><font color="#330000">4. Running</font></h1>
 
 <h2>
 <a NAME="4.1"></a><font color="#330000">4.1. Ack!&nbsp; My backspace/delete/enter/double
@@ -395,7 +440,8 @@ keystroke here>!</font></h2>
 
 <blockquote><font color="#330000">If you aren't trying some bizarre keystroke
 combination with some bizarre $TERM entry, chances are you have found a
-bug.&nbsp;&nbsp; You are welcome to submit it to the nano-devel list or
+bug.&nbsp;&nbsp; You are welcome to submit it to the
+<a href="mailto:nano-devel@gnu.org">nano-devel</a> list or
 to <a href="mailto:nano@nano-editor.org">nano@nano-editor.org</a>.</font></blockquote>
 
 <h2>
@@ -407,26 +453,28 @@ please upgrade to a newer version (at least 0.9.9 would be great, 0.9.12
 is recommended).</font></blockquote>
 
 <h2>
-<a NAME="4.4"></a><font color="#330000">4.4. Why does nano show ^\ and
-^_ in the shortcut list instead of ^G and ^J?</font></h2>
+<a NAME="4.4"></a><font color="#330000">4.4. Why does nano show ^\ in the
+shortcut list instead of ^J?</font></h2>
 
-<blockquote><font color="#330000">The help (^G) and justify (^J) functions
+<blockquote><font color="#330000">The help (^G) and justify (^J) function
 were among the last to be written.&nbsp; To show the improvements that
 nano had over Pico (goto line # and replace), ^_ and ^\ were put on the
-shortcut list.&nbsp;&nbsp; If you use the <b>-p</b> option to nano you
-will get the same shortcuts at the bottom as Pico.</font></blockquote>
+shortcut list.&nbsp;&nbsp; Later, ^G came back in place of ^_ as it proved
+to be very valuable for new UNIX users. If you use the <b>-p</b> option to
+nano (or hit Meta-P) you will get the same shortcuts at the bottom as
+Pico.</font></blockquote>
 
 <h2>
 <a name="4.5"><font color="#330000">4.5. When I type in a search
 string, the string I last searched for is already in front of my
-cursor!  !What happened?!</font></h2>
+cursor!  What happened?!</font></h2>
 
 <blockquote><font color="#330000">In nano version 0.9.20, the default is
 to have a completely consistent user interface across all user input
 functions.  This means that regardless of whether you're being asked for
 a filename to insert or write, or a string to search for, the
 previous value is already inserted before the cursor.  If you prefer the
-old behavior, use the pico emulation mode (-p or --pico) or just hit
+old behavior, use the Pico emulation mode (-p or --pico) or just hit
 Meta-P while in nano (see the ^G help text for more
 details).</font></blockquote>
 
@@ -455,7 +503,7 @@ mutt, etc)?</h2>
 
 <blockquote>You need to make nano your $EDITOR.&nbsp; If you want this
 to be saved, you should put a line like this in your <b>.bashrc</b> if
-you use bash:
+you use bash (or <b>.zshrc</b> if you believe in zsh):
 <p><b>export EDITOR=/usr/local/bin/nano</b>
 <p>or if you use tcsh put this in your <b>.cshrc</b> file:
 <p><b>setenv EDITOR /usr/local/bin/nano</b>
@@ -484,20 +532,32 @@ this in your <b>.muttrc</b>:
 <a NAME="5.1"></a><font color="#330000">5.1. There's no translation for
 my language!</font></h2>
 
-<blockquote><font color="#330000">So, uh, get someone who speaks your native
-language to write one =-).&nbsp; Just grab the <b>nano.pot</b> file from
-the latest and greatest nano distribution (it's in the <b>po/</b> directory)
-and translate each line into your native language on the <b>msgstr</b>
-line.&nbsp; Then send it to the nano devel list or <a href="mailto:nano@nano-editor.org">nano@nano-editor.org</a>.</font></blockquote>
+<blockquote><font color="#330000">On June of 2001, GNU nano entered the
+<a href="www.iro.umontreal.ca/contrib/po/HTML">Free Translation Project</a>
+and since then, translations should be managed from there.
+<p>If there isn't a translation for your language, you could ask
+<a href="http://www.iro.umontreal.ca/contrib/po/HTML/teams.html">your language
+team</a> to tranlate nano, or better still, join your team and do it yourself.
+Joining a team is easy. You just need to ask the
+<a href="mailto:translation@iro.umontreal.ca">TP coordinator</a> to add you
+to your team, and send a <a href="http://www.iro.umontreal.ca/contrib/po/HTML/disclaim.html">translation disclaimer to the FSF</a> (this is necessary as
+nano is an official GNU package, but it does <strong>not</strong> mean that
+you transfer the rights of your work to the FSF, it's just so the FSF can
+legaly manage them).</p>
+<p>In any case, translating nano is very easy.&nbsp; Just grab the
+<b>nano.pot</b> file from the latest and greatest nano distribution
+(it's in the <b>po/</b> directory) and translate each line into your native
+language on the <b>msgstr</b> line.&nbsp; When you're done, you should
+send it to the TP's central po repository.
 
 <h2>
 <a NAME="5.2"></a><font color="#330000">5.2. I don't like the translation
 for &lt;x> in my language.&nbsp;&nbsp; How can I fix it?</font></h2>
 
 <blockquote><font color="#330000">The best way would probably be to e-mail
-the person listed in the <b>&lt;your_language>.po</b> file with your suggested
-corrections and they can in turn forward it to the nano email address,
-or the devel list.</font></blockquote>
+the person listed in the <code>Last-Translator:</code> field in
+<b>&lt;your_language&gt;.po</b> file with your suggested corrections and
+they can make the changes reach the nano devel list.</font></blockquote>
 
 <hr WIDTH="100%">
 <h1>
@@ -521,11 +581,11 @@ of personal preference as to which editor you should use.&nbsp; If you're
 the type of person who likes using the original version of a program, then
 Pico is the editor for you.&nbsp;&nbsp; If you're looking for a few more
 features and a 'better' license as far as adding your own changes (sacrificing
-mailer integration and a little stability), nano is the way to go.
+mailer integration with Pine), nano is the way to go.
 </blockquote>
 
 <h2>
-<a NAME="6.3"></a><font color="#330000">6.3. What is so bad about the PINE
+<a NAME="6.3"></a><font color="#330000">6.3. What is so bad about the Pine
 license?</font></h2>
 
 <blockquote><font color="#330000">The U of W license for Pine and
@@ -534,7 +594,7 @@ Software Foundation and the  the <a
 href="http://www.debian.org/social_contract#guidelines">Debian
 Free Software Guidelines</a>.&nbsp; The main problem regards the
 limitations on distributing derived works: according to UW, you can
-distribute their software, and you can modfify it, but you can not do
+distribute their software, and you can modify it, but you can not do
 both, i.e. distribute modified binaries.</blockquote>
 
 <h2>
@@ -542,7 +602,7 @@ both, i.e. distribute modified binaries.</blockquote>
 should I use then?</font></h2>
 
 <blockquote><font color="#330000"> If you are looking to use a Free
-Software program similar to PINE and emacs is not your things, you should
+Software program similar to Pine and emacs is not your thing, you should
 definitely take a look at <a href="http://www.mutt.org">mutt</a>.&nbsp; It
 is a full-screen, console based mail program that actually has a lot more
 flexibility than Pine, but has a keymap included in the distribution that
@@ -576,21 +636,33 @@ any changes in the past few years in a positive direction.</font></blockquote>
 <h2>
 <a NAME="7.1"></a><font color="#330000">7.1. Nano related mailing lists.</font></h2>
 
-<blockquote><font color="#330000">There are two mailing lists for nano
-hosted at <a href="http://www.sourceforge.net">SourceForge</a>, nano-announce
+<blockquote><font color="#330000">There are three mailing lists for nano
+hosted at <a href="http://savannah.gnu.org">Savannah</a>, info-nano, help-nano 
 and nano-devel.&nbsp; Nano-announce is a very low traffic list where new
 versions of nano are announced (surprise!)&nbsp; Nano-devel is a normally
-low, sometimes very high traffic list for dicussing the present and future
-development of nano.&nbsp; Here are links to where you can sign up for
+low, sometimes high traffic list for discussing the present and future
+development of nano.&nbsp; Help-nano is for getting help with the editor
+without needing to hear all of the development issues surrunding it.
+&nbsp; Here are links to where you can sign up for
 a given list:</font><font color="#330000"></font>
-<p><font color="#330000">nano-announce - <a href="http://lists.sourceforge.net/mailman/listinfo/nano-announce">http://lists.sourceforge.net/mailman/listinfo/nano-announce</a></font>
-<br><font color="#330000">nano-devel - <a href="http://lists.sourceforge.net/mailman/listinfo/nano-devel">http://lists.sourceforge.net/mailman/listinfo/nano-devel</a></font></blockquote>
+<p><font color="#330000">info-nano - <a href="
+http://mail.gnu.org/mailman/listinfo/info-nano">
+http://mail.gnu.org/mailman/listinfo/info-nano</a></font>
+<br>
+<font color="#330000">help-nano - 
+<a href="http://mail.gnu.org/mailman/listinfo/help-nano">
+http://mail.gnu.org/mailman/listinfo/help-nano</a></font>
+<br>
+<font color="#330000">nano-devel - 
+<a href="http://mail.gnu.org/mailman/listinfo/nano-devel">
+http://mail.gnu.org/mailman/listinfo/nano-devel</a></font>
+</blockquote>
 
 <h2>
 <a NAME="7.2"></a><font color="#330000">7.2. I want to send the development
 team a big load of cash (or just a thank you).</font></h2>
 
-<blockquote><font color="#330000">That's fine.&nbsp; Send it <a href="mailto:nano-devel@lists.sourceforge.net">our
+<blockquote><font color="#330000">That's fine.&nbsp; Send it <a href="mailto:nano-devel@gnu.org">our
 way</a>!&nbsp; Better yet, fix a <a href="http://www.nano-editor.org/dist/BUGS">bug</a>
 in the program or implement a <a href="http://www.nano-editor.org/dist/TODO">cool
 feature</a> and send us that instead (though cash is fine too).</font></blockquote>
@@ -607,7 +679,7 @@ team?</font></h2>
 <blockquote><font color="#330000">The easiest way is to consistently send
 in good patches that add some needed functionality, fix a bug or two and/or
 make the program more optimized/efficient.&nbsp; Then ask nicely and you
-will probably be added to the SourceForge development list and be given
+will probably be added to the Savannah development list and be given
 CVS write after awhile.&nbsp; There is a lot of responsibility that goes
 along with being a team member, so don't think it's just something to add
 to your resume.</font></blockquote>
@@ -618,10 +690,31 @@ to your resume.</font></blockquote>
 <blockquote><font color="#330000">Re-read Section </font><a href="#7.4">7.4</a><font color="#330000">
 and you should know the answer.</font></blockquote>
 
-<h1>
-<a NAME="8"></a>8. ChangeLog</h1>
+<h2>
+<a NAME="8"></a><font color="#330000">8. ChangeLog</font>
+</h2>
 
-<blockquote>06/31/2000 - Initial framework.</blockquote>
+<blockquote>2002/09/10 - Another typo fix (DLR).</blockquote>
+<blockquote>2002/05/15 - Typo fix (DLR).</blockquote>
+<blockquote>2001/12/26 - Misc. fixes (Aaron S. Hawley, DLR).</blockquote>
+<blockquote>2001/10/02 - Update for Free Translation Project.</blockquote>
+<blockquote>2001/10/02 - Assorted fixes, Debian additions.</blockquote>
+<blockquote>2001/06/30 - Silly typo fix.</blockquote>
+<blockquote>2001/05/05 - Spelling fixes by David Lawrence Ramsey.</blockquote>
+<blockquote>2001/05/02 - Misc fixes.</blockquote>
+<blockquote>2001/03/26 - Typo fix in an URL.</blockquote>
+<blockquote>2001/02/17 - Advocacy updates.</blockquote>
+<blockquote>2001/02/15 - Added GNU notes for 0.9.99pre3.</blockquote>
+<blockquote>2001/02/06 - Typo fixes.</blockquote>
+<blockquote>2001/01/14 - Added note about numlock glitch.</blockquote>
+<blockquote>2001/01/10 - Linux --&gt; GNU/Linux.</blockquote>
+<blockquote>2001/01/09 - Added "making exe smaller section.</blockquote>
+<blockquote>2000/12/19 - Typo and assorted error fixes.</blockquote>
+<blockquote>2000/11/28 - Added blurb about make install-strip.</blockquote>
+<blockquote>2000/11/19 - Changed Debian frozen to stable.</blockquote>
+<blockquote>2000/11/18 - Previous string display (4.5).</blockquote>
+<blockquote>2000/09/27 - Moved addresses to nano-editor.org.</blockquote>
+<blockquote>2000/06/31 - Initial framework.</blockquote>
 <P>
 $Id$
 </body>

install-sh

@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0

intl/.cvsignore

@@ -1,3 +0,0 @@
-Makefile
-libintl.h
-po2tbl.sed

intl/Makefile.in

@@ -1,214 +0,0 @@
-# Makefile for directory with message catalog handling in GNU NLS Utilities.
-# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-
-SHELL = /bin/sh
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-transform = @program_transform_name@
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
-datadir = $(prefix)/@DATADIRNAME@
-localedir = $(datadir)/locale
-gnulocaledir = $(prefix)/share/locale
-gettextsrcdir = @datadir@/gettext/intl
-aliaspath = $(localedir):.
-subdir = intl
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-
-l = @l@
-
-AR = ar
-CC = @CC@
-LIBTOOL = @LIBTOOL@
-RANLIB = @RANLIB@
-
-DEFS = -DLOCALEDIR=\"$(localedir)\" -DGNULOCALEDIR=\"$(gnulocaledir)\" \
--DLOCALE_ALIAS_PATH=\"$(aliaspath)\" @DEFS@
-CPPFLAGS = @CPPFLAGS@
-CFLAGS = @CFLAGS@
-LDFLAGS = @LDFLAGS@
-
-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
-
-HEADERS = $(COMHDRS) libgettext.h loadinfo.h
-COMHDRS = gettext.h gettextP.h hash-string.h
-SOURCES = $(COMSRCS) intl-compat.c cat-compat.c
-COMSRCS = bindtextdom.c dcgettext.c dgettext.c gettext.c \
-finddomain.c loadmsgcat.c localealias.c textdomain.c l10nflist.c \
-explodename.c
-OBJECTS = @INTLOBJS@ bindtextdom.$lo dcgettext.$lo dgettext.$lo gettext.$lo \
-finddomain.$lo loadmsgcat.$lo localealias.$lo textdomain.$lo l10nflist.$lo \
-explodename.$lo
-CATOBJS = cat-compat.$lo ../po/cat-id-tbl.$lo
-GETTOBJS = intl-compat.$lo
-DISTFILES.common = ChangeLog Makefile.in linux-msg.sed po2tbl.sed.in \
-xopen-msg.sed $(HEADERS) $(SOURCES)
-DISTFILES.normal = VERSION
-DISTFILES.gettext = libintl.glibc intlh.inst.in
-
-.SUFFIXES:
-.SUFFIXES: .c .o .lo
-.c.o:
-	$(COMPILE) $<
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) $<
-
-INCLUDES = -I.. -I. -I$(top_srcdir)/intl -I$(top_srcdir)/lib
-
-all: all-@USE_INCLUDED_LIBINTL@
-
-all-yes: libintl.$la intlh.inst
-all-no:
-
-libintl.a: $(OBJECTS)
-	rm -f $@
-	$(AR) cru $@ $(OBJECTS)
-	$(RANLIB) $@
-
-libintl.la: $(OBJECTS)
-	$(LIBTOOL) --mode=link $(CC) $(LDFLAGS) -o $@ $(OBJECTS) \
-		   -version-info 1:0 -rpath $(libdir)
-
-../po/cat-id-tbl.$lo: ../po/cat-id-tbl.c $(top_srcdir)/po/$(PACKAGE).pot
-	cd ../po && $(MAKE) cat-id-tbl.$lo
-
-check: all
-
-# This installation goal is only used in GNU gettext.  Packages which
-# only use the library should use install instead.
-
-# We must not install the libintl.h/libintl.a files if we are on a
-# system which has the gettext() function in its C library or in a
-# separate library or use the catgets interface.  A special case is
-# where configure found a previously installed GNU gettext library.
-# If you want to use the one which comes with this version of the
-# package, you have to use `configure --with-included-gettext'.
-install: install-exec install-data
-install-exec: all
-	if test "$(PACKAGE)" = "gettext" \
-	   && test '@INTLOBJS@' = '$(GETTOBJS)'; then \
-	  if test -r $(MKINSTALLDIRS); then \
-	    $(MKINSTALLDIRS) $(libdir) $(includedir); \
-	  else \
-	    $(top_srcdir)/mkinstalldirs $(libdir) $(includedir); \
-	  fi; \
-	  $(INSTALL_DATA) intlh.inst $(includedir)/libintl.h; \
-	  $(INSTALL_DATA) libintl.a $(libdir)/libintl.a; \
-	else \
-	  : ; \
-	fi
-install-data: all
-	if test "$(PACKAGE)" = "gettext"; then \
-	  if test -r $(MKINSTALLDIRS); then \
-	    $(MKINSTALLDIRS) $(gettextsrcdir); \
-	  else \
-	    $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \
-	  fi; \
-	  $(INSTALL_DATA) VERSION $(gettextsrcdir)/VERSION; \
-	  dists="$(DISTFILES.common)"; \
-	  for file in $$dists; do \
-	    $(INSTALL_DATA) $(srcdir)/$$file $(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall:
-	dists="$(DISTFILES.common)"; \
-	for file in $$dists; do \
-	  rm -f $(gettextsrcdir)/$$file; \
-	done
-
-info dvi:
-
-$(OBJECTS): ../config.h libgettext.h
-bindtextdom.$lo finddomain.$lo loadmsgcat.$lo: gettextP.h gettext.h loadinfo.h
-dcgettext.$lo: gettextP.h gettext.h hash-string.h loadinfo.h
-
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES)
-	here=`pwd`; cd $(srcdir) && etags -o $$here/TAGS $(HEADERS) $(SOURCES)
-
-id: ID
-
-ID: $(HEADERS) $(SOURCES)
-	here=`pwd`; cd $(srcdir) && mkid -f$$here/ID $(HEADERS) $(SOURCES)
-
-
-mostlyclean:
-	rm -f *.a *.o *.lo core core.*
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile ID TAGS po2msg.sed po2tbl.sed libintl.h
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-
-# GNU gettext needs not contain the file `VERSION' but contains some
-# other files which should not be distributed in other packages.
-distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir: Makefile $(DISTFILES)
-	if test "$(PACKAGE)" = gettext; then \
-	  additional="$(DISTFILES.gettext)"; \
-	else \
-	  additional="$(DISTFILES.normal)"; \
-	fi; \
-	for file in $(DISTFILES.common) $$additional; do \
-	  ln $(srcdir)/$$file $(distdir) 2> /dev/null \
-	    || cp -p $(srcdir)/$$file $(distdir); \
-	done
-
-dist-libc:
-	tar zcvf intl-glibc.tar.gz $(COMSRCS) $(COMHDRS) libintl.h.glibc
-
-Makefile: Makefile.in ../config.status
-	cd .. \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-# The dependency for intlh.inst is different in gettext and all other
-# packages.  Because we cannot you GNU make features we have to solve
-# the problem while rewriting Makefile.in.
-@GT_YES@intlh.inst: intlh.inst.in ../config.status
-@GT_YES@	cd .. \
-@GT_YES@	&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= \
-@GT_YES@	  $(SHELL) ./config.status
-@GT_NO@.PHONY: intlh.inst
-@GT_NO@intlh.inst:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

intl/VERSION

@@ -1 +0,0 @@
-GNU gettext library from gettext-0.10.35

intl/bindtextdom.c

@@ -1,203 +0,0 @@
-/* Implementation of the bindtextdomain(3) function
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgettext.h"
-#endif
-#include "gettext.h"
-#include "gettextP.h"
-
-/* @@ end of prolog @@ */
-
-/* Contains the default location of the message catalogs.  */
-extern const char _nl_default_dirname[];
-
-/* List with bindings of specific domains.  */
-extern struct binding *_nl_domain_bindings;
-
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define BINDTEXTDOMAIN __bindtextdomain
-# ifndef strdup
-#  define strdup(str) __strdup (str)
-# endif
-#else
-# define BINDTEXTDOMAIN bindtextdomain__
-#endif
-
-/* Specify that the DOMAINNAME message catalog will be found
-   in DIRNAME rather than in the system locale data base.  */
-char *
-BINDTEXTDOMAIN (domainname, dirname)
-     const char *domainname;
-     const char *dirname;
-{
-  struct binding *binding;
-
-  /* Some sanity checks.  */
-  if (domainname == NULL || domainname[0] == '\0')
-    return NULL;
-
-  for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
-    {
-      int compare = strcmp (domainname, binding->domainname);
-      if (compare == 0)
-	/* We found it!  */
-	break;
-      if (compare < 0)
-	{
-	  /* It is not in the list.  */
-	  binding = NULL;
-	  break;
-	}
-    }
-
-  if (dirname == NULL)
-    /* The current binding has be to returned.  */
-    return binding == NULL ? (char *) _nl_default_dirname : binding->dirname;
-
-  if (binding != NULL)
-    {
-      /* The domain is already bound.  If the new value and the old
-	 one are equal we simply do nothing.  Otherwise replace the
-	 old binding.  */
-      if (strcmp (dirname, binding->dirname) != 0)
-	{
-	  char *new_dirname;
-
-	  if (strcmp (dirname, _nl_default_dirname) == 0)
-	    new_dirname = (char *) _nl_default_dirname;
-	  else
-	    {
-#if defined _LIBC || defined HAVE_STRDUP
-	      new_dirname = strdup (dirname);
-	      if (new_dirname == NULL)
-		return NULL;
-#else
-	      size_t len = strlen (dirname) + 1;
-	      new_dirname = (char *) malloc (len);
-	      if (new_dirname == NULL)
-		return NULL;
-
-	      memcpy (new_dirname, dirname, len);
-#endif
-	    }
-
-	  if (binding->dirname != _nl_default_dirname)
-	    free (binding->dirname);
-
-	  binding->dirname = new_dirname;
-	}
-    }
-  else
-    {
-      /* We have to create a new binding.  */
-#if !defined _LIBC && !defined HAVE_STRDUP
-      size_t len;
-#endif
-      struct binding *new_binding =
-	(struct binding *) malloc (sizeof (*new_binding));
-
-      if (new_binding == NULL)
-	return NULL;
-
-#if defined _LIBC || defined HAVE_STRDUP
-      new_binding->domainname = strdup (domainname);
-      if (new_binding->domainname == NULL)
-	return NULL;
-#else
-      len = strlen (domainname) + 1;
-      new_binding->domainname = (char *) malloc (len);
-      if (new_binding->domainname == NULL)
-	return NULL;
-      memcpy (new_binding->domainname, domainname, len);
-#endif
-
-      if (strcmp (dirname, _nl_default_dirname) == 0)
-	new_binding->dirname = (char *) _nl_default_dirname;
-      else
-	{
-#if defined _LIBC || defined HAVE_STRDUP
-	  new_binding->dirname = strdup (dirname);
-	  if (new_binding->dirname == NULL)
-	    return NULL;
-#else
-	  len = strlen (dirname) + 1;
-	  new_binding->dirname = (char *) malloc (len);
-	  if (new_binding->dirname == NULL)
-	    return NULL;
-	  memcpy (new_binding->dirname, dirname, len);
-#endif
-	}
-
-      /* Now enqueue it.  */
-      if (_nl_domain_bindings == NULL
-	  || strcmp (domainname, _nl_domain_bindings->domainname) < 0)
-	{
-	  new_binding->next = _nl_domain_bindings;
-	  _nl_domain_bindings = new_binding;
-	}
-      else
-	{
-	  binding = _nl_domain_bindings;
-	  while (binding->next != NULL
-		 && strcmp (domainname, binding->next->domainname) > 0)
-	    binding = binding->next;
-
-	  new_binding->next = binding->next;
-	  binding->next = new_binding;
-	}
-
-      binding = new_binding;
-    }
-
-  return binding->dirname;
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__bindtextdomain, bindtextdomain);
-#endif

intl/cat-compat.c

@@ -1,262 +0,0 @@
-/* Compatibility code for gettext-using-catgets interface.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <string.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# endif
-#endif
-
-#ifdef HAVE_NL_TYPES_H
-# include <nl_types.h>
-#endif
-
-#include "libgettext.h"
-
-/* @@ end of prolog @@ */
-
-/* XPG3 defines the result of `setlocale (category, NULL)' as:
-   ``Directs `setlocale()' to query `category' and return the current
-     setting of `local'.''
-   However it does not specify the exact format.  And even worse: POSIX
-   defines this not at all.  So we can use this feature only on selected
-   system (e.g. those using GNU C Library).  */
-#ifdef _LIBC
-# define HAVE_LOCALE_NULL
-#endif
-
-/* The catalog descriptor.  */
-static nl_catd catalog = (nl_catd) -1;
-
-/* Name of the default catalog.  */
-static const char default_catalog_name[] = "messages";
-
-/* Name of currently used catalog.  */
-static const char *catalog_name = default_catalog_name;
-
-/* Get ID for given string.  If not found return -1.  */
-static int msg_to_cat_id PARAMS ((const char *msg));
-
-/* Substitution for systems lacking this function in their C library.  */
-#if !_LIBC && !HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-#endif
-
-
-/* Set currently used domain/catalog.  */
-char *
-textdomain (domainname)
-     const char *domainname;
-{
-  nl_catd new_catalog;
-  char *new_name;
-  size_t new_name_len;
-  char *lang;
-
-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES \
-    && defined HAVE_LOCALE_NULL
-  lang = setlocale (LC_MESSAGES, NULL);
-#else
-  lang = getenv ("LC_ALL");
-  if (lang == NULL || lang[0] == '\0')
-    {
-      lang = getenv ("LC_MESSAGES");
-      if (lang == NULL || lang[0] == '\0')
-	lang = getenv ("LANG");
-    }
-#endif
-  if (lang == NULL || lang[0] == '\0')
-    lang = "C";
-
-  /* See whether name of currently used domain is asked.  */
-  if (domainname == NULL)
-    return (char *) catalog_name;
-
-  if (domainname[0] == '\0')
-    domainname = default_catalog_name;
-
-  /* Compute length of added path element.  */
-  new_name_len = sizeof (LOCALEDIR) - 1 + 1 + strlen (lang)
-		 + sizeof ("/LC_MESSAGES/") - 1 + sizeof (PACKAGE) - 1
-		 + sizeof (".cat");
-
-  new_name = (char *) malloc (new_name_len);
-  if (new_name == NULL)
-    return NULL;
-
-  strcpy (new_name, PACKAGE);
-  new_catalog = catopen (new_name, 0);
-
-  if (new_catalog == (nl_catd) -1)
-    {
-      /* NLSPATH search didn't work, try absolute path */
-      sprintf (new_name, "%s/%s/LC_MESSAGES/%s.cat", LOCALEDIR, lang,
-	       PACKAGE);
-      new_catalog = catopen (new_name, 0);
-
-      if (new_catalog == (nl_catd) -1)
-	{
-	  free (new_name);
-	  return (char *) catalog_name;
-	}
-    }
-
-  /* Close old catalog.  */
-  if (catalog != (nl_catd) -1)
-    catclose (catalog);
-  if (catalog_name != default_catalog_name)
-    free ((char *) catalog_name);
-
-  catalog = new_catalog;
-  catalog_name = new_name;
-
-  return (char *) catalog_name;
-}
-
-char *
-bindtextdomain (domainname, dirname)
-     const char *domainname;
-     const char *dirname;
-{
-#if HAVE_SETENV || HAVE_PUTENV
-  char *old_val, *new_val, *cp;
-  size_t new_val_len;
-
-  /* This does not make much sense here but to be compatible do it.  */
-  if (domainname == NULL)
-    return NULL;
-
-  /* Compute length of added path element.  If we use setenv we don't need
-     the first byts for NLSPATH=, but why complicate the code for this
-     peanuts.  */
-  new_val_len = sizeof ("NLSPATH=") - 1 + strlen (dirname)
-		+ sizeof ("/%L/LC_MESSAGES/%N.cat");
-
-  old_val = getenv ("NLSPATH");
-  if (old_val == NULL || old_val[0] == '\0')
-    {
-      old_val = NULL;
-      new_val_len += 1 + sizeof (LOCALEDIR) - 1
-	             + sizeof ("/%L/LC_MESSAGES/%N.cat");
-    }
-  else
-    new_val_len += strlen (old_val);
-
-  new_val = (char *) malloc (new_val_len);
-  if (new_val == NULL)
-    return NULL;
-
-# if HAVE_SETENV
-  cp = new_val;
-# else
-  cp = stpcpy (new_val, "NLSPATH=");
-# endif
-
-  cp = stpcpy (cp, dirname);
-  cp = stpcpy (cp, "/%L/LC_MESSAGES/%N.cat:");
-
-  if (old_val == NULL)
-    {
-# if __STDC__
-      stpcpy (cp, LOCALEDIR "/%L/LC_MESSAGES/%N.cat");
-# else
-
-      cp = stpcpy (cp, LOCALEDIR);
-      stpcpy (cp, "/%L/LC_MESSAGES/%N.cat");
-# endif
-    }
-  else
-    stpcpy (cp, old_val);
-
-# if HAVE_SETENV
-  setenv ("NLSPATH", new_val, 1);
-  free (new_val);
-# else
-  putenv (new_val);
-  /* Do *not* free the environment entry we just entered.  It is used
-     from now on.   */
-# endif
-
-#endif
-
-  return (char *) domainname;
-}
-
-#undef gettext
-char *
-gettext (msg)
-     const char *msg;
-{
-  int msgid;
-
-  if (msg == NULL || catalog == (nl_catd) -1)
-    return (char *) msg;
-
-  /* Get the message from the catalog.  We always use set number 1.
-     The message ID is computed by the function `msg_to_cat_id'
-     which works on the table generated by `po-to-tbl'.  */
-  msgid = msg_to_cat_id (msg);
-  if (msgid == -1)
-    return (char *) msg;
-
-  return catgets (catalog, 1, msgid, (char *) msg);
-}
-
-/* Look through the table `_msg_tbl' which has `_msg_tbl_length' entries
-   for the one equal to msg.  If it is found return the ID.  In case when
-   the string is not found return -1.  */
-static int
-msg_to_cat_id (msg)
-     const char *msg;
-{
-  int cnt;
-
-  for (cnt = 0; cnt < _msg_tbl_length; ++cnt)
-    if (strcmp (msg, _msg_tbl[cnt]._msg) == 0)
-      return _msg_tbl[cnt]._msg_number;
-
-  return -1;
-}
-
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library.  So we
-   avoid the non-standard function stpcpy.  In GNU C Library this
-   function is available, though.  Also allow the symbol HAVE_STPCPY
-   to be defined.  */
-#if !_LIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-#endif

intl/dcgettext.c

@@ -1,655 +0,0 @@
-/* Implementation of the dcgettext(3) function.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <sys/types.h>
-
-#if defined __GNUC__ && !defined C_ALLOCA
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if (defined HAVE_ALLOCA_H || defined _LIBC) && !defined C_ALLOCA
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #pragma alloca
-#  else
-#   ifndef alloca
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-#ifndef __set_errno
-# define __set_errno(val) errno = (val)
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-#  define _GNU_SOURCE	1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#include "gettext.h"
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgettext.h"
-#endif
-#include "hash-string.h"
-
-/* @@ end of prolog @@ */
-
-#ifdef _LIBC
-/* Rename the non ANSI C functions.  This is required by the standard
-   because some ANSI C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# define getcwd __getcwd
-# ifndef stpcpy
-#  define stpcpy __stpcpy
-# endif
-#else
-# if !defined HAVE_GETCWD
-char *getwd ();
-#  define getcwd(buf, max) getwd (buf)
-# else
-char *getcwd ();
-# endif
-# ifndef HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-# endif
-#endif
-
-/* Amount to increase buffer size by in each try.  */
-#define PATH_INCR 32
-
-/* The following is from pathmax.h.  */
-/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
-   PATH_MAX but might cause redefinition warnings when sys/param.h is
-   later included (as on MORE/BSD 4.3).  */
-#if defined(_POSIX_VERSION) || (defined(HAVE_LIMITS_H) && !defined(__GNUC__))
-# include <limits.h>
-#endif
-
-#ifndef _POSIX_PATH_MAX
-# define _POSIX_PATH_MAX 255
-#endif
-
-#if !defined(PATH_MAX) && defined(_PC_PATH_MAX)
-# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
-#endif
-
-/* Don't include sys/param.h if it already has been.  */
-#if defined(HAVE_SYS_PARAM_H) && !defined(PATH_MAX) && !defined(MAXPATHLEN)
-# include <sys/param.h>
-#endif
-
-#if !defined(PATH_MAX) && defined(MAXPATHLEN)
-# define PATH_MAX MAXPATHLEN
-#endif
-
-#ifndef PATH_MAX
-# define PATH_MAX _POSIX_PATH_MAX
-#endif
-
-/* XPG3 defines the result of `setlocale (category, NULL)' as:
-   ``Directs `setlocale()' to query `category' and return the current
-     setting of `local'.''
-   However it does not specify the exact format.  And even worse: POSIX
-   defines this not at all.  So we can use this feature only on selected
-   system (e.g. those using GNU C Library).  */
-#ifdef _LIBC
-# define HAVE_LOCALE_NULL
-#endif
-
-/* Name of the default domain used for gettext(3) prior any call to
-   textdomain(3).  The default value for this is "messages".  */
-const char _nl_default_default_domain[] = "messages";
-
-/* Value used as the default domain for gettext(3).  */
-const char *_nl_current_default_domain = _nl_default_default_domain;
-
-/* Contains the default location of the message catalogs.  */
-const char _nl_default_dirname[] = GNULOCALEDIR;
-
-/* List with bindings of specific domains created by bindtextdomain()
-   calls.  */
-struct binding *_nl_domain_bindings;
-
-/* Prototypes for local functions.  */
-static char *find_msg PARAMS ((struct loaded_l10nfile *domain_file,
-			       const char *msgid)) internal_function;
-static const char *category_to_name PARAMS ((int category)) internal_function;
-static const char *guess_category_value PARAMS ((int category,
-						 const char *categoryname))
-     internal_function;
-
-
-/* For those loosing systems which don't have `alloca' we have to add
-   some additional code emulating it.  */
-#ifdef HAVE_ALLOCA
-/* Nothing has to be done.  */
-# define ADD_BLOCK(list, address) /* nothing */
-# define FREE_BLOCKS(list) /* nothing */
-#else
-struct block_list
-{
-  void *address;
-  struct block_list *next;
-};
-# define ADD_BLOCK(list, addr)						      \
-  do {									      \
-    struct block_list *newp = (struct block_list *) malloc (sizeof (*newp));  \
-    /* If we cannot get a free block we cannot add the new element to	      \
-       the list.  */							      \
-    if (newp != NULL) {							      \
-      newp->address = (addr);						      \
-      newp->next = (list);						      \
-      (list) = newp;							      \
-    }									      \
-  } while (0)
-# define FREE_BLOCKS(list)						      \
-  do {									      \
-    while (list != NULL) {						      \
-      struct block_list *old = list;					      \
-      list = list->next;						      \
-      free (old);							      \
-    }									      \
-  } while (0)
-# undef alloca
-# define alloca(size) (malloc (size))
-#endif	/* have alloca */
-
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define DCGETTEXT __dcgettext
-#else
-# define DCGETTEXT dcgettext__
-#endif
-
-/* Checking whether the binaries runs SUID must be done and glibc provides
-   easier methods therefore we make a difference here.  */
-#ifdef _LIBC
-# define ENABLE_SECURE __libc_enable_secure
-# define DETERMINE_SECURE
-#else
-static int enable_secure;
-# define ENABLE_SECURE (enable_secure == 1)
-# define DETERMINE_SECURE \
-  if (enable_secure == 0)						      \
-    {									      \
-      if (getuid () != geteuid () || getgid () != getegid ())		      \
-	enable_secure = 1;						      \
-      else								      \
-	enable_secure = -1;						      \
-    }
-#endif
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-   locale.  */
-char *
-DCGETTEXT (domainname, msgid, category)
-     const char *domainname;
-     const char *msgid;
-     int category;
-{
-#ifndef HAVE_ALLOCA
-  struct block_list *block_list = NULL;
-#endif
-  struct loaded_l10nfile *domain;
-  struct binding *binding;
-  const char *categoryname;
-  const char *categoryvalue;
-  char *dirname, *xdomainname;
-  char *single_locale;
-  char *retval;
-  int saved_errno = errno;
-
-  /* If no real MSGID is given return NULL.  */
-  if (msgid == NULL)
-    return NULL;
-
-  /* See whether this is a SUID binary or not.  */
-  DETERMINE_SECURE;
-
-  /* If DOMAINNAME is NULL, we are interested in the default domain.  If
-     CATEGORY is not LC_MESSAGES this might not make much sense but the
-     definition left this undefined.  */
-  if (domainname == NULL)
-    domainname = _nl_current_default_domain;
-
-  /* First find matching binding.  */
-  for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
-    {
-      int compare = strcmp (domainname, binding->domainname);
-      if (compare == 0)
-	/* We found it!  */
-	break;
-      if (compare < 0)
-	{
-	  /* It is not in the list.  */
-	  binding = NULL;
-	  break;
-	}
-    }
-
-  if (binding == NULL)
-    dirname = (char *) _nl_default_dirname;
-  else if (binding->dirname[0] == '/')
-    dirname = binding->dirname;
-  else
-    {
-      /* We have a relative path.  Make it absolute now.  */
-      size_t dirname_len = strlen (binding->dirname) + 1;
-      size_t path_max;
-      char *ret;
-
-      path_max = (unsigned int) PATH_MAX;
-      path_max += 2;		/* The getcwd docs say to do this.  */
-
-      dirname = (char *) alloca (path_max + dirname_len);
-      ADD_BLOCK (block_list, dirname);
-
-      __set_errno (0);
-      while ((ret = getcwd (dirname, path_max)) == NULL && errno == ERANGE)
-	{
-	  path_max += PATH_INCR;
-	  dirname = (char *) alloca (path_max + dirname_len);
-	  ADD_BLOCK (block_list, dirname);
-	  __set_errno (0);
-	}
-
-      if (ret == NULL)
-	{
-	  /* We cannot get the current working directory.  Don't signal an
-	     error but simply return the default string.  */
-	  FREE_BLOCKS (block_list);
-	  __set_errno (saved_errno);
-	  return (char *) msgid;
-	}
-
-      stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
-    }
-
-  /* Now determine the symbolic name of CATEGORY and its value.  */
-  categoryname = category_to_name (category);
-  categoryvalue = guess_category_value (category, categoryname);
-
-  xdomainname = (char *) alloca (strlen (categoryname)
-				 + strlen (domainname) + 5);
-  ADD_BLOCK (block_list, xdomainname);
-
-  stpcpy (stpcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
-		  domainname),
-	  ".mo");
-
-  /* Creating working area.  */
-  single_locale = (char *) alloca (strlen (categoryvalue) + 1);
-  ADD_BLOCK (block_list, single_locale);
-
-
-  /* Search for the given string.  This is a loop because we perhaps
-     got an ordered list of languages to consider for the translation.  */
-  while (1)
-    {
-      /* Make CATEGORYVALUE point to the next element of the list.  */
-      while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
-	++categoryvalue;
-      if (categoryvalue[0] == '\0')
-	{
-	  /* The whole contents of CATEGORYVALUE has been searched but
-	     no valid entry has been found.  We solve this situation
-	     by implicitly appending a "C" entry, i.e. no translation
-	     will take place.  */
-	  single_locale[0] = 'C';
-	  single_locale[1] = '\0';
-	}
-      else
-	{
-	  char *cp = single_locale;
-	  while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
-	    *cp++ = *categoryvalue++;
-	  *cp = '\0';
-
-	  /* When this is a SUID binary we must not allow accessing files
-	     outside the dedicated directories.  */
-	  if (ENABLE_SECURE
-	      && (memchr (single_locale, '/',
-			  _nl_find_language (single_locale) - single_locale)
-		  != NULL))
-	    /* Ingore this entry.  */
-	    continue;
-	}
-
-      /* If the current locale value is C (or POSIX) we don't load a
-	 domain.  Return the MSGID.  */
-      if (strcmp (single_locale, "C") == 0
-	  || strcmp (single_locale, "POSIX") == 0)
-	{
-	  FREE_BLOCKS (block_list);
-	  __set_errno (saved_errno);
-	  return (char *) msgid;
-	}
-
-
-      /* Find structure describing the message catalog matching the
-	 DOMAINNAME and CATEGORY.  */
-      domain = _nl_find_domain (dirname, single_locale, xdomainname);
-
-      if (domain != NULL)
-	{
-	  retval = find_msg (domain, msgid);
-
-	  if (retval == NULL)
-	    {
-	      int cnt;
-
-	      for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
-		{
-		  retval = find_msg (domain->successor[cnt], msgid);
-
-		  if (retval != NULL)
-		    break;
-		}
-	    }
-
-	  if (retval != NULL)
-	    {
-	      FREE_BLOCKS (block_list);
-	      __set_errno (saved_errno);
-	      return retval;
-	    }
-	}
-    }
-  /* NOTREACHED */
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__dcgettext, dcgettext);
-#endif
-
-
-static char *
-internal_function
-find_msg (domain_file, msgid)
-     struct loaded_l10nfile *domain_file;
-     const char *msgid;
-{
-  size_t act = 0;
-  size_t top, bottom;
-  struct loaded_domain *domain;
-
-  if (domain_file->decided == 0)
-    _nl_load_domain (domain_file);
-
-  if (domain_file->data == NULL)
-    return NULL;
-
-  domain = (struct loaded_domain *) domain_file->data;
-
-  /* Locate the MSGID and its translation.  */
-  if (domain->hash_size > 2 && domain->hash_tab != NULL)
-    {
-      /* Use the hashing table.  */
-      nls_uint32 len = strlen (msgid);
-      nls_uint32 hash_val = hash_string (msgid);
-      nls_uint32 idx = hash_val % domain->hash_size;
-      nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
-      nls_uint32 nstr = W (domain->must_swap, domain->hash_tab[idx]);
-
-      if (nstr == 0)
-	/* Hash table entry is empty.  */
-	return NULL;
-
-      if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
-	  && strcmp (msgid,
-		     domain->data + W (domain->must_swap,
-				       domain->orig_tab[nstr - 1].offset)) == 0)
-	return (char *) domain->data + W (domain->must_swap,
-					  domain->trans_tab[nstr - 1].offset);
-
-      while (1)
-	{
-	  if (idx >= domain->hash_size - incr)
-	    idx -= domain->hash_size - incr;
-	  else
-	    idx += incr;
-
-	  nstr = W (domain->must_swap, domain->hash_tab[idx]);
-	  if (nstr == 0)
-	    /* Hash table entry is empty.  */
-	    return NULL;
-
-	  if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
-	      && strcmp (msgid,
-			 domain->data + W (domain->must_swap,
-					   domain->orig_tab[nstr - 1].offset))
-	         == 0)
-	    return (char *) domain->data
-	      + W (domain->must_swap, domain->trans_tab[nstr - 1].offset);
-	}
-      /* NOTREACHED */
-    }
-
-  /* Now we try the default method:  binary search in the sorted
-     array of messages.  */
-  bottom = 0;
-  top = domain->nstrings;
-  while (bottom < top)
-    {
-      int cmp_val;
-
-      act = (bottom + top) / 2;
-      cmp_val = strcmp (msgid, domain->data
-			       + W (domain->must_swap,
-				    domain->orig_tab[act].offset));
-      if (cmp_val < 0)
-	top = act;
-      else if (cmp_val > 0)
-	bottom = act + 1;
-      else
-	break;
-    }
-
-  /* If an translation is found return this.  */
-  return bottom >= top ? NULL : (char *) domain->data
-                                + W (domain->must_swap,
-				     domain->trans_tab[act].offset);
-}
-
-
-/* Return string representation of locale CATEGORY.  */
-static const char *
-internal_function
-category_to_name (category)
-     int category;
-{
-  const char *retval;
-
-  switch (category)
-  {
-#ifdef LC_COLLATE
-  case LC_COLLATE:
-    retval = "LC_COLLATE";
-    break;
-#endif
-#ifdef LC_CTYPE
-  case LC_CTYPE:
-    retval = "LC_CTYPE";
-    break;
-#endif
-#ifdef LC_MONETARY
-  case LC_MONETARY:
-    retval = "LC_MONETARY";
-    break;
-#endif
-#ifdef LC_NUMERIC
-  case LC_NUMERIC:
-    retval = "LC_NUMERIC";
-    break;
-#endif
-#ifdef LC_TIME
-  case LC_TIME:
-    retval = "LC_TIME";
-    break;
-#endif
-#ifdef LC_MESSAGES
-  case LC_MESSAGES:
-    retval = "LC_MESSAGES";
-    break;
-#endif
-#ifdef LC_RESPONSE
-  case LC_RESPONSE:
-    retval = "LC_RESPONSE";
-    break;
-#endif
-#ifdef LC_ALL
-  case LC_ALL:
-    /* This might not make sense but is perhaps better than any other
-       value.  */
-    retval = "LC_ALL";
-    break;
-#endif
-  default:
-    /* If you have a better idea for a default value let me know.  */
-    retval = "LC_XXX";
-  }
-
-  return retval;
-}
-
-/* Guess value of current locale from value of the environment variables.  */
-static const char *
-internal_function
-guess_category_value (category, categoryname)
-     int category;
-     const char *categoryname;
-{
-  const char *retval;
-
-  /* The highest priority value is the `LANGUAGE' environment
-     variable.  This is a GNU extension.  */
-  retval = getenv ("LANGUAGE");
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* `LANGUAGE' is not set.  So we have to proceed with the POSIX
-     methods of looking to `LC_ALL', `LC_xxx', and `LANG'.  On some
-     systems this can be done by the `setlocale' function itself.  */
-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
-  return setlocale (category, NULL);
-#else
-  /* Setting of LC_ALL overwrites all other.  */
-  retval = getenv ("LC_ALL");
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* Next comes the name of the desired category.  */
-  retval = getenv (categoryname);
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* Last possibility is the LANG environment variable.  */
-  retval = getenv ("LANG");
-  if (retval != NULL && retval[0] != '\0')
-    return retval;
-
-  /* We use C as the default domain.  POSIX says this is implementation
-     defined.  */
-  return "C";
-#endif
-}
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library.  So we
-   avoid the non-standard function stpcpy.  In GNU C Library this
-   function is available, though.  Also allow the symbol HAVE_STPCPY
-   to be defined.  */
-#if !_LIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-#endif
-
-
-#ifdef _LIBC
-/* If we want to free all resources we have to do some work at
-   program's end.  */
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  struct binding *runp;
-
-  for (runp = _nl_domain_bindings; runp != NULL; runp = runp->next)
-    {
-      free (runp->domainname);
-      if (runp->dirname != _nl_default_dirname)
-	/* Yes, this is a pointer comparison.  */
-	free (runp->dirname);
-    }
-
-  if (_nl_current_default_domain != _nl_default_default_domain)
-    /* Yes, again a pointer comparison.  */
-    free ((char *) _nl_current_default_domain);
-}
-
-text_set_element (__libc_subfreeres, free_mem);
-#endif

intl/dgettext.c

@@ -1,59 +0,0 @@
-/* Implementation of the dgettext(3) function
-   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined HAVE_LOCALE_H || defined _LIBC
-# include <locale.h>
-#endif
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgettext.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define DGETTEXT __dgettext
-# define DCGETTEXT __dcgettext
-#else
-# define DGETTEXT dgettext__
-# define DCGETTEXT dcgettext__
-#endif
-
-/* Look up MSGID in the DOMAINNAME message catalog of the current
-   LC_MESSAGES locale.  */
-char *
-DGETTEXT (domainname, msgid)
-     const char *domainname;
-     const char *msgid;
-{
-  return DCGETTEXT (domainname, msgid, LC_MESSAGES);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__dgettext, dgettext);
-#endif

intl/explodename.c

@@ -1,198 +0,0 @@
-/* Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-#include <sys/types.h>
-
-#include "loadinfo.h"
-
-/* On some strange systems still no definition of NULL is found.  Sigh!  */
-#ifndef NULL
-# if defined __STDC__ && __STDC__
-#  define NULL ((void *) 0)
-# else
-#  define NULL 0
-# endif
-#endif
-
-/* @@ end of prolog @@ */
-
-char *
-_nl_find_language (name)
-     const char *name;
-{
-  while (name[0] != '\0' && name[0] != '_' && name[0] != '@'
-	 && name[0] != '+' && name[0] != ',')
-    ++name;
-
-  return (char *) name;
-}
-
-
-int
-_nl_explode_name (name, language, modifier, territory, codeset,
-		  normalized_codeset, special, sponsor, revision)
-     char *name;
-     const char **language;
-     const char **modifier;
-     const char **territory;
-     const char **codeset;
-     const char **normalized_codeset;
-     const char **special;
-     const char **sponsor;
-     const char **revision;
-{
-  enum { undecided, xpg, cen } syntax;
-  char *cp;
-  int mask;
-
-  *modifier = NULL;
-  *territory = NULL;
-  *codeset = NULL;
-  *normalized_codeset = NULL;
-  *special = NULL;
-  *sponsor = NULL;
-  *revision = NULL;
-
-  /* Now we determine the single parts of the locale name.  First
-     look for the language.  Termination symbols are `_' and `@' if
-     we use XPG4 style, and `_', `+', and `,' if we use CEN syntax.  */
-  mask = 0;
-  syntax = undecided;
-  *language = cp = name;
-  cp = _nl_find_language (*language);
-
-  if (*language == cp)
-    /* This does not make sense: language has to be specified.  Use
-       this entry as it is without exploding.  Perhaps it is an alias.  */
-    cp = strchr (*language, '\0');
-  else if (cp[0] == '_')
-    {
-      /* Next is the territory.  */
-      cp[0] = '\0';
-      *territory = ++cp;
-
-      while (cp[0] != '\0' && cp[0] != '.' && cp[0] != '@'
-	     && cp[0] != '+' && cp[0] != ',' && cp[0] != '_')
-	++cp;
-
-      mask |= TERRITORY;
-
-      if (cp[0] == '.')
-	{
-	  /* Next is the codeset.  */
-	  syntax = xpg;
-	  cp[0] = '\0';
-	  *codeset = ++cp;
-
-	  while (cp[0] != '\0' && cp[0] != '@')
-	    ++cp;
-
-	  mask |= XPG_CODESET;
-
-	  if (*codeset != cp && (*codeset)[0] != '\0')
-	    {
-	      *normalized_codeset = _nl_normalize_codeset (*codeset,
-							   cp - *codeset);
-	      if (strcmp (*codeset, *normalized_codeset) == 0)
-		free ((char *) *normalized_codeset);
-	      else
-		mask |= XPG_NORM_CODESET;
-	    }
-	}
-    }
-
-  if (cp[0] == '@' || (syntax != xpg && cp[0] == '+'))
-    {
-      /* Next is the modifier.  */
-      syntax = cp[0] == '@' ? xpg : cen;
-      cp[0] = '\0';
-      *modifier = ++cp;
-
-      while (syntax == cen && cp[0] != '\0' && cp[0] != '+'
-	     && cp[0] != ',' && cp[0] != '_')
-	++cp;
-
-      mask |= XPG_MODIFIER | CEN_AUDIENCE;
-    }
-
-  if (syntax != xpg && (cp[0] == '+' || cp[0] == ',' || cp[0] == '_'))
-    {
-      syntax = cen;
-
-      if (cp[0] == '+')
-	{
- 	  /* Next is special application (CEN syntax).  */
-	  cp[0] = '\0';
-	  *special = ++cp;
-
-	  while (cp[0] != '\0' && cp[0] != ',' && cp[0] != '_')
-	    ++cp;
-
-	  mask |= CEN_SPECIAL;
-	}
-
-      if (cp[0] == ',')
-	{
- 	  /* Next is sponsor (CEN syntax).  */
-	  cp[0] = '\0';
-	  *sponsor = ++cp;
-
-	  while (cp[0] != '\0' && cp[0] != '_')
-	    ++cp;
-
-	  mask |= CEN_SPONSOR;
-	}
-
-      if (cp[0] == '_')
-	{
- 	  /* Next is revision (CEN syntax).  */
-	  cp[0] = '\0';
-	  *revision = ++cp;
-
-	  mask |= CEN_REVISION;
-	}
-    }
-
-  /* For CEN syntax values it might be important to have the
-     separator character in the file name, not for XPG syntax.  */
-  if (syntax == xpg)
-    {
-      if (*territory != NULL && (*territory)[0] == '\0')
-	mask &= ~TERRITORY;
-
-      if (*codeset != NULL && (*codeset)[0] == '\0')
-	mask &= ~XPG_CODESET;
-
-      if (*modifier != NULL && (*modifier)[0] == '\0')
-	mask &= ~XPG_MODIFIER;
-    }
-
-  return mask;
-}

intl/finddomain.c

@@ -1,216 +0,0 @@
-/* Handle list of needed message catalogs
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <ctype.h>
-#include <errno.h>
-#include <stdio.h>
-#include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#include "gettext.h"
-#include "gettextP.h"
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgettext.h"
-#endif
-
-/* @@ end of prolog @@ */
-/* List of already loaded domains.  */
-static struct loaded_l10nfile *_nl_loaded_domains;
-
-
-/* Return a data structure describing the message catalog described by
-   the DOMAINNAME and CATEGORY parameters with respect to the currently
-   established bindings.  */
-struct loaded_l10nfile *
-internal_function
-_nl_find_domain (dirname, locale, domainname)
-     const char *dirname;
-     char *locale;
-     const char *domainname;
-{
-  struct loaded_l10nfile *retval;
-  const char *language;
-  const char *modifier;
-  const char *territory;
-  const char *codeset;
-  const char *normalized_codeset;
-  const char *special;
-  const char *sponsor;
-  const char *revision;
-  const char *alias_value;
-  int mask;
-
-  /* LOCALE can consist of up to four recognized parts for the XPG syntax:
-
-		language[_territory[.codeset]][@modifier]
-
-     and six parts for the CEN syntax:
-
-	language[_territory][+audience][+special][,[sponsor][_revision]]
-
-     Beside the first part all of them are allowed to be missing.  If
-     the full specified locale is not found, the less specific one are
-     looked for.  The various parts will be stripped off according to
-     the following order:
-		(1) revision
-		(2) sponsor
-		(3) special
-		(4) codeset
-		(5) normalized codeset
-		(6) territory
-		(7) audience/modifier
-   */
-
-  /* If we have already tested for this locale entry there has to
-     be one data set in the list of loaded domains.  */
-  retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
-			       strlen (dirname) + 1, 0, locale, NULL, NULL,
-			       NULL, NULL, NULL, NULL, NULL, domainname, 0);
-  if (retval != NULL)
-    {
-      /* We know something about this locale.  */
-      int cnt;
-
-      if (retval->decided == 0)
-	_nl_load_domain (retval);
-
-      if (retval->data != NULL)
-	return retval;
-
-      for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
-	{
-	  if (retval->successor[cnt]->decided == 0)
-	    _nl_load_domain (retval->successor[cnt]);
-
-	  if (retval->successor[cnt]->data != NULL)
-	    break;
-	}
-      return cnt >= 0 ? retval : NULL;
-      /* NOTREACHED */
-    }
-
-  /* See whether the locale value is an alias.  If yes its value
-     *overwrites* the alias name.  No test for the original value is
-     done.  */
-  alias_value = _nl_expand_alias (locale);
-  if (alias_value != NULL)
-    {
-#if defined _LIBC || defined HAVE_STRDUP
-      locale = strdup (alias_value);
-      if (locale == NULL)
-	return NULL;
-#else
-      size_t len = strlen (alias_value) + 1;
-      locale = (char *) malloc (len);
-      if (locale == NULL)
-	return NULL;
-
-      memcpy (locale, alias_value, len);
-#endif
-    }
-
-  /* Now we determine the single parts of the locale name.  First
-     look for the language.  Termination symbols are `_' and `@' if
-     we use XPG4 style, and `_', `+', and `,' if we use CEN syntax.  */
-  mask = _nl_explode_name (locale, &language, &modifier, &territory,
-			   &codeset, &normalized_codeset, &special,
-			   &sponsor, &revision);
-
-  /* Create all possible locale entries which might be interested in
-     generalization.  */
-  retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
-			       strlen (dirname) + 1, mask, language, territory,
-			       codeset, normalized_codeset, modifier, special,
-			       sponsor, revision, domainname, 1);
-  if (retval == NULL)
-    /* This means we are out of core.  */
-    return NULL;
-
-  if (retval->decided == 0)
-    _nl_load_domain (retval);
-  if (retval->data == NULL)
-    {
-      int cnt;
-      for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
-	{
-	  if (retval->successor[cnt]->decided == 0)
-	    _nl_load_domain (retval->successor[cnt]);
-	  if (retval->successor[cnt]->data != NULL)
-	    break;
-	}
-    }
-
-  /* The room for an alias was dynamically allocated.  Free it now.  */
-  if (alias_value != NULL)
-    free (locale);
-
-  return retval;
-}
-
-
-#ifdef _LIBC
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  struct loaded_l10nfile *runp = _nl_loaded_domains;
-
-  while (runp != NULL)
-    {
-      struct loaded_l10nfile *here = runp;
-      if (runp->data != NULL)
-	_nl_unload_domain ((struct loaded_domain *) runp->data);
-      runp = runp->next;
-      free (here);
-    }
-}
-
-text_set_element (__libc_subfreeres, free_mem);
-#endif

intl/gettext.c

@@ -1,70 +0,0 @@
-/* Implementation of gettext(3) function.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#ifdef _LIBC
-# define __need_NULL
-# include <stddef.h>
-#else
-# ifdef STDC_HEADERS
-#  include <stdlib.h>		/* Just for NULL.  */
-# else
-#  ifdef HAVE_STRING_H
-#   include <string.h>
-#  else
-#   define NULL ((void *) 0)
-#  endif
-# endif
-#endif
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgettext.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define GETTEXT __gettext
-# define DGETTEXT __dgettext
-#else
-# define GETTEXT gettext__
-# define DGETTEXT dgettext__
-#endif
-
-/* Look up MSGID in the current default message catalog for the current
-   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
-   text).  */
-char *
-GETTEXT (msgid)
-     const char *msgid;
-{
-  return DGETTEXT (NULL, msgid);
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__gettext, gettext);
-#endif

intl/gettext.h

@@ -1,105 +0,0 @@
-/* Internal header for GNU gettext internationalization functions.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef _GETTEXT_H
-#define _GETTEXT_H 1
-
-#include <stdio.h>
-
-#if HAVE_LIMITS_H || _LIBC
-# include <limits.h>
-#endif
-
-/* @@ end of prolog @@ */
-
-/* The magic number of the GNU message catalog format.  */
-#define _MAGIC 0x950412de
-#define _MAGIC_SWAPPED 0xde120495
-
-/* Revision number of the currently used .mo (binary) file format.  */
-#define MO_REVISION_NUMBER 0
-
-/* The following contortions are an attempt to use the C preprocessor
-   to determine an unsigned integral type that is 32 bits wide.  An
-   alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
-   doing that would require that the configure script compile and *run*
-   the resulting executable.  Locally running cross-compiled executables
-   is usually not possible.  */
-
-#if __STDC__
-# define UINT_MAX_32_BITS 4294967295U
-#else
-# define UINT_MAX_32_BITS 0xFFFFFFFF
-#endif
-
-/* If UINT_MAX isn't defined, assume it's a 32-bit type.
-   This should be valid for all systems GNU cares about because
-   that doesn't include 16-bit systems, and only modern systems
-   (that certainly have <limits.h>) have 64+-bit integral types.  */
-
-#ifndef UINT_MAX
-# define UINT_MAX UINT_MAX_32_BITS
-#endif
-
-#if UINT_MAX == UINT_MAX_32_BITS
-typedef unsigned nls_uint32;
-#else
-# if USHRT_MAX == UINT_MAX_32_BITS
-typedef unsigned short nls_uint32;
-# else
-#  if ULONG_MAX == UINT_MAX_32_BITS
-typedef unsigned long nls_uint32;
-#  else
-  /* The following line is intended to throw an error.  Using #error is
-     not portable enough.  */
-  "Cannot determine unsigned 32-bit data type."
-#  endif
-# endif
-#endif
-
-
-/* Header for binary .mo file format.  */
-struct mo_file_header
-{
-  /* The magic number.  */
-  nls_uint32 magic;
-  /* The revision number of the file format.  */
-  nls_uint32 revision;
-  /* The number of strings pairs.  */
-  nls_uint32 nstrings;
-  /* Offset of table with start offsets of original strings.  */
-  nls_uint32 orig_tab_offset;
-  /* Offset of table with start offsets of translation strings.  */
-  nls_uint32 trans_tab_offset;
-  /* Size of hashing table.  */
-  nls_uint32 hash_tab_size;
-  /* Offset of first hashing entry.  */
-  nls_uint32 hash_tab_offset;
-};
-
-struct string_desc
-{
-  /* Length of addressed string.  */
-  nls_uint32 length;
-  /* Offset of string in file.  */
-  nls_uint32 offset;
-};
-
-/* @@ begin of epilog @@ */
-
-#endif	/* gettext.h  */

intl/gettextP.h

@@ -1,89 +0,0 @@
-/* Header describing internals of gettext library
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef _GETTEXTP_H
-#define _GETTEXTP_H
-
-#include "loadinfo.h"
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(args) args
-# else
-#  define PARAMS(args) ()
-# endif
-#endif
-
-#ifndef internal_function
-# define internal_function
-#endif
-
-#ifndef W
-# define W(flag, data) ((flag) ? SWAP (data) : (data))
-#endif
-
-
-#ifdef _LIBC
-# include <byteswap.h>
-# define SWAP(i) bswap_32 (i)
-#else
-static nls_uint32 SWAP PARAMS ((nls_uint32 i));
-
-static inline nls_uint32
-SWAP (i)
-     nls_uint32 i;
-{
-  return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24);
-}
-#endif
-
-
-struct loaded_domain
-{
-  const char *data;
-  int use_mmap;
-  size_t mmap_size;
-  int must_swap;
-  nls_uint32 nstrings;
-  struct string_desc *orig_tab;
-  struct string_desc *trans_tab;
-  nls_uint32 hash_size;
-  nls_uint32 *hash_tab;
-};
-
-struct binding
-{
-  struct binding *next;
-  char *domainname;
-  char *dirname;
-};
-
-struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname,
-						 char *__locale,
-						 const char *__domainname))
-     internal_function;
-void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain))
-     internal_function;
-void _nl_unload_domain PARAMS ((struct loaded_domain *__domain))
-     internal_function;
-
-/* @@ begin of epilog @@ */
-
-#endif /* gettextP.h  */

intl/hash-string.h

@@ -1,59 +0,0 @@
-/* Implements a string hashing function.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
-#endif
-
-/* We assume to have `unsigned long int' value with at least 32 bits.  */
-#define HASHWORDBITS 32
-
-
-/* Defines the so called `hashpjw' function by P.J. Weinberger
-   [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
-   1986, 1987 Bell Telephone Laboratories, Inc.]  */
-static unsigned long int hash_string PARAMS ((const char *__str_param));
-
-static inline unsigned long int
-hash_string (str_param)
-     const char *str_param;
-{
-  unsigned long int hval, g;
-  const char *str = str_param;
-
-  /* Compute the hash value for the given string.  */
-  hval = 0;
-  while (*str != '\0')
-    {
-      hval <<= 4;
-      hval += (unsigned long int) *str++;
-      g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4));
-      if (g != 0)
-	{
-	  hval ^= g >> (HASHWORDBITS - 8);
-	  hval ^= g;
-	}
-    }
-  return hval;
-}

intl/intl-compat.c

@@ -1,76 +0,0 @@
-/* intl-compat.c - Stub functions to call gettext functions from GNU gettext
-   Library.
-   Copyright (C) 1995 Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include "libgettext.h"
-
-/* @@ end of prolog @@ */
-
-
-#undef gettext
-#undef dgettext
-#undef dcgettext
-#undef textdomain
-#undef bindtextdomain
-
-
-char *
-bindtextdomain (domainname, dirname)
-     const char *domainname;
-     const char *dirname;
-{
-  return bindtextdomain__ (domainname, dirname);
-}
-
-
-char *
-dcgettext (domainname, msgid, category)
-     const char *domainname;
-     const char *msgid;
-     int category;
-{
-  return dcgettext__ (domainname, msgid, category);
-}
-
-
-char *
-dgettext (domainname, msgid)
-     const char *domainname;
-     const char *msgid;
-{
-  return dgettext__ (domainname, msgid);
-}
-
-
-char *
-gettext (msgid)
-     const char *msgid;
-{
-  return gettext__ (msgid);
-}
-
-
-char *
-textdomain (domainname)
-     const char *domainname;
-{
-  return textdomain__ (domainname);
-}

intl/l10nflist.c

@@ -1,411 +0,0 @@
-/* Handle list of needed message catalogs
-   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-#  define _GNU_SOURCE	1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#if defined _LIBC || defined HAVE_ARGZ_H
-# include <argz.h>
-#endif
-#include <ctype.h>
-#include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#include "loadinfo.h"
-
-/* On some strange systems still no definition of NULL is found.  Sigh!  */
-#ifndef NULL
-# if defined __STDC__ && __STDC__
-#  define NULL ((void *) 0)
-# else
-#  define NULL 0
-# endif
-#endif
-
-/* @@ end of prolog @@ */
-
-#ifdef _LIBC
-/* Rename the non ANSI C functions.  This is required by the standard
-   because some ANSI C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# ifndef stpcpy
-#  define stpcpy(dest, src) __stpcpy(dest, src)
-# endif
-#else
-# ifndef HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-# endif
-#endif
-
-/* Define function which are usually not available.  */
-
-#if !defined _LIBC && !defined HAVE___ARGZ_COUNT
-/* Returns the number of strings in ARGZ.  */
-static size_t argz_count__ PARAMS ((const char *argz, size_t len));
-
-static size_t
-argz_count__ (argz, len)
-     const char *argz;
-     size_t len;
-{
-  size_t count = 0;
-  while (len > 0)
-    {
-      size_t part_len = strlen (argz);
-      argz += part_len + 1;
-      len -= part_len + 1;
-      count++;
-    }
-  return count;
-}
-# undef __argz_count
-# define __argz_count(argz, len) argz_count__ (argz, len)
-#endif	/* !_LIBC && !HAVE___ARGZ_COUNT */
-
-#if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY
-/* Make '\0' separated arg vector ARGZ printable by converting all the '\0's
-   except the last into the character SEP.  */
-static void argz_stringify__ PARAMS ((char *argz, size_t len, int sep));
-
-static void
-argz_stringify__ (argz, len, sep)
-     char *argz;
-     size_t len;
-     int sep;
-{
-  while (len > 0)
-    {
-      size_t part_len = strlen (argz);
-      argz += part_len;
-      len -= part_len + 1;
-      if (len > 0)
-	*argz++ = sep;
-    }
-}
-# undef __argz_stringify
-# define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep)
-#endif	/* !_LIBC && !HAVE___ARGZ_STRINGIFY */
-
-#if !defined _LIBC && !defined HAVE___ARGZ_NEXT
-static char *argz_next__ PARAMS ((char *argz, size_t argz_len,
-				  const char *entry));
-
-static char *
-argz_next__ (argz, argz_len, entry)
-     char *argz;
-     size_t argz_len;
-     const char *entry;
-{
-  if (entry)
-    {
-      if (entry < argz + argz_len)
-        entry = strchr (entry, '\0') + 1;
-
-      return entry >= argz + argz_len ? NULL : (char *) entry;
-    }
-  else
-    if (argz_len > 0)
-      return argz;
-    else
-      return 0;
-}
-# undef __argz_next
-# define __argz_next(argz, len, entry) argz_next__ (argz, len, entry)
-#endif	/* !_LIBC && !HAVE___ARGZ_NEXT */
-
-
-/* Return number of bits set in X.  */
-static int pop PARAMS ((int x));
-
-static inline int
-pop (x)
-     int x;
-{
-  /* We assume that no more than 16 bits are used.  */
-  x = ((x & ~0x5555) >> 1) + (x & 0x5555);
-  x = ((x & ~0x3333) >> 2) + (x & 0x3333);
-  x = ((x >> 4) + x) & 0x0f0f;
-  x = ((x >> 8) + x) & 0xff;
-
-  return x;
-}
-
-
-struct loaded_l10nfile *
-_nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language,
-		    territory, codeset, normalized_codeset, modifier, special,
-		    sponsor, revision, filename, do_allocate)
-     struct loaded_l10nfile **l10nfile_list;
-     const char *dirlist;
-     size_t dirlist_len;
-     int mask;
-     const char *language;
-     const char *territory;
-     const char *codeset;
-     const char *normalized_codeset;
-     const char *modifier;
-     const char *special;
-     const char *sponsor;
-     const char *revision;
-     const char *filename;
-     int do_allocate;
-{
-  char *abs_filename;
-  struct loaded_l10nfile *last = NULL;
-  struct loaded_l10nfile *retval;
-  char *cp;
-  size_t entries;
-  int cnt;
-
-  /* Allocate room for the full file name.  */
-  abs_filename = (char *) malloc (dirlist_len
-				  + strlen (language)
-				  + ((mask & TERRITORY) != 0
-				     ? strlen (territory) + 1 : 0)
-				  + ((mask & XPG_CODESET) != 0
-				     ? strlen (codeset) + 1 : 0)
-				  + ((mask & XPG_NORM_CODESET) != 0
-				     ? strlen (normalized_codeset) + 1 : 0)
-				  + (((mask & XPG_MODIFIER) != 0
-				      || (mask & CEN_AUDIENCE) != 0)
-				     ? strlen (modifier) + 1 : 0)
-				  + ((mask & CEN_SPECIAL) != 0
-				     ? strlen (special) + 1 : 0)
-				  + (((mask & CEN_SPONSOR) != 0
-				      || (mask & CEN_REVISION) != 0)
-				     ? (1 + ((mask & CEN_SPONSOR) != 0
-					     ? strlen (sponsor) + 1 : 0)
-					+ ((mask & CEN_REVISION) != 0
-					   ? strlen (revision) + 1 : 0)) : 0)
-				  + 1 + strlen (filename) + 1);
-
-  if (abs_filename == NULL)
-    return NULL;
-
-  retval = NULL;
-  last = NULL;
-
-  /* Construct file name.  */
-  memcpy (abs_filename, dirlist, dirlist_len);
-  __argz_stringify (abs_filename, dirlist_len, ':');
-  cp = abs_filename + (dirlist_len - 1);
-  *cp++ = '/';
-  cp = stpcpy (cp, language);
-
-  if ((mask & TERRITORY) != 0)
-    {
-      *cp++ = '_';
-      cp = stpcpy (cp, territory);
-    }
-  if ((mask & XPG_CODESET) != 0)
-    {
-      *cp++ = '.';
-      cp = stpcpy (cp, codeset);
-    }
-  if ((mask & XPG_NORM_CODESET) != 0)
-    {
-      *cp++ = '.';
-      cp = stpcpy (cp, normalized_codeset);
-    }
-  if ((mask & (XPG_MODIFIER | CEN_AUDIENCE)) != 0)
-    {
-      /* This component can be part of both syntaces but has different
-	 leading characters.  For CEN we use `+', else `@'.  */
-      *cp++ = (mask & CEN_AUDIENCE) != 0 ? '+' : '@';
-      cp = stpcpy (cp, modifier);
-    }
-  if ((mask & CEN_SPECIAL) != 0)
-    {
-      *cp++ = '+';
-      cp = stpcpy (cp, special);
-    }
-  if ((mask & (CEN_SPONSOR | CEN_REVISION)) != 0)
-    {
-      *cp++ = ',';
-      if ((mask & CEN_SPONSOR) != 0)
-	cp = stpcpy (cp, sponsor);
-      if ((mask & CEN_REVISION) != 0)
-	{
-	  *cp++ = '_';
-	  cp = stpcpy (cp, revision);
-	}
-    }
-
-  *cp++ = '/';
-  stpcpy (cp, filename);
-
-  /* Look in list of already loaded domains whether it is already
-     available.  */
-  last = NULL;
-  for (retval = *l10nfile_list; retval != NULL; retval = retval->next)
-    if (retval->filename != NULL)
-      {
-	int compare = strcmp (retval->filename, abs_filename);
-	if (compare == 0)
-	  /* We found it!  */
-	  break;
-	if (compare < 0)
-	  {
-	    /* It's not in the list.  */
-	    retval = NULL;
-	    break;
-	  }
-
-	last = retval;
-      }
-
-  if (retval != NULL || do_allocate == 0)
-    {
-      free (abs_filename);
-      return retval;
-    }
-
-  retval = (struct loaded_l10nfile *)
-    malloc (sizeof (*retval) + (__argz_count (dirlist, dirlist_len)
-				* (1 << pop (mask))
-				* sizeof (struct loaded_l10nfile *)));
-  if (retval == NULL)
-    return NULL;
-
-  retval->filename = abs_filename;
-  retval->decided = (__argz_count (dirlist, dirlist_len) != 1
-		     || ((mask & XPG_CODESET) != 0
-			 && (mask & XPG_NORM_CODESET) != 0));
-  retval->data = NULL;
-
-  if (last == NULL)
-    {
-      retval->next = *l10nfile_list;
-      *l10nfile_list = retval;
-    }
-  else
-    {
-      retval->next = last->next;
-      last->next = retval;
-    }
-
-  entries = 0;
-  /* If the DIRLIST is a real list the RETVAL entry corresponds not to
-     a real file.  So we have to use the DIRLIST separation mechanism
-     of the inner loop.  */
-  cnt = __argz_count (dirlist, dirlist_len) == 1 ? mask - 1 : mask;
-  for (; cnt >= 0; --cnt)
-    if ((cnt & ~mask) == 0
-	&& ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0)
-	&& ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0))
-      {
-	/* Iterate over all elements of the DIRLIST.  */
-	char *dir = NULL;
-
-	while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir))
-	       != NULL)
-	  retval->successor[entries++]
-	    = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1, cnt,
-				  language, territory, codeset,
-				  normalized_codeset, modifier, special,
-				  sponsor, revision, filename, 1);
-      }
-  retval->successor[entries] = NULL;
-
-  return retval;
-}
-
-/* Normalize codeset name.  There is no standard for the codeset
-   names.  Normalization allows the user to use any of the common
-   names.  */
-const char *
-_nl_normalize_codeset (codeset, name_len)
-     const char *codeset;
-     size_t name_len;
-{
-  int len = 0;
-  int only_digit = 1;
-  char *retval;
-  char *wp;
-  size_t cnt;
-
-  for (cnt = 0; cnt < name_len; ++cnt)
-    if (isalnum (codeset[cnt]))
-      {
-	++len;
-
-	if (isalpha (codeset[cnt]))
-	  only_digit = 0;
-      }
-
-  retval = (char *) malloc ((only_digit ? 3 : 0) + len + 1);
-
-  if (retval != NULL)
-    {
-      if (only_digit)
-	wp = stpcpy (retval, "iso");
-      else
-	wp = retval;
-
-      for (cnt = 0; cnt < name_len; ++cnt)
-	if (isalpha (codeset[cnt]))
-	  *wp++ = tolower (codeset[cnt]);
-	else if (isdigit (codeset[cnt]))
-	  *wp++ = codeset[cnt];
-
-      *wp = '\0';
-    }
-
-  return (const char *) retval;
-}
-
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library.  So we
-   avoid the non-standard function stpcpy.  In GNU C Library this
-   function is available, though.  Also allow the symbol HAVE_STPCPY
-   to be defined.  */
-#if !_LIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
-     char *dest;
-     const char *src;
-{
-  while ((*dest++ = *src++) != '\0')
-    /* Do nothing. */ ;
-  return dest - 1;
-}
-#endif

intl/libgettext.h

@@ -1,182 +0,0 @@
-/* Message catalogs for internationalization.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Because on some systems (e.g. Solaris) we sometimes have to include
-   the systems libintl.h as well as this file we have more complex
-   include protection above.  But the systems header might perhaps also
-   define _LIBINTL_H and therefore we have to protect the definition here.  */
-
-#if !defined _LIBINTL_H || !defined _LIBGETTEXT_H
-#ifndef _LIBINTL_H
-# define _LIBINTL_H	1
-#endif
-#define _LIBGETTEXT_H	1
-
-/* We define an additional symbol to signal that we use the GNU
-   implementation of gettext.  */
-#define __USE_GNU_GETTEXT 1
-
-#include <sys/types.h>
-
-#if HAVE_LOCALE_H
-# include <locale.h>
-#endif
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__ || defined __cplusplus
-#  define PARAMS(args) args
-# else
-#  define PARAMS(args) ()
-# endif
-#endif
-
-#ifndef NULL
-# if !defined __cplusplus || defined __GNUC__
-#  define NULL ((void *) 0)
-# else
-#  define NULL (0)
-# endif
-#endif
-
-#if !HAVE_LC_MESSAGES
-/* This value determines the behaviour of the gettext() and dgettext()
-   function.  But some system does not have this defined.  Define it
-   to a default value.  */
-# define LC_MESSAGES (-1)
-#endif
-
-
-/* Declarations for gettext-using-catgets interface.  Derived from
-   Jim Meyering's libintl.h.  */
-struct _msg_ent
-{
-  const char *_msg;
-  int _msg_number;
-};
-
-
-#if HAVE_CATGETS
-/* These two variables are defined in the automatically by po-to-tbl.sed
-   generated file `cat-id-tbl.c'.  */
-extern const struct _msg_ent _msg_tbl[];
-extern int _msg_tbl_length;
-#endif
-
-
-/* For automatical extraction of messages sometimes no real
-   translation is needed.  Instead the string itself is the result.  */
-#define gettext_noop(Str) (Str)
-
-/* Look up MSGID in the current default message catalog for the current
-   LC_MESSAGES locale.  If not found, returns MSGID itself (the default
-   text).  */
-extern char *gettext PARAMS ((const char *__msgid));
-extern char *gettext__ PARAMS ((const char *__msgid));
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current
-   LC_MESSAGES locale.  */
-extern char *dgettext PARAMS ((const char *__domainname, const char *__msgid));
-extern char *dgettext__ PARAMS ((const char *__domainname,
-				 const char *__msgid));
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-   locale.  */
-extern char *dcgettext PARAMS ((const char *__domainname, const char *__msgid,
-				int __category));
-extern char *dcgettext__ PARAMS ((const char *__domainname,
-				  const char *__msgid, int __category));
-
-
-/* Set the current default message catalog to DOMAINNAME.
-   If DOMAINNAME is null, return the current default.
-   If DOMAINNAME is "", reset to the default of "messages".  */
-extern char *textdomain PARAMS ((const char *__domainname));
-extern char *textdomain__ PARAMS ((const char *__domainname));
-
-/* Specify that the DOMAINNAME message catalog will be found
-   in DIRNAME rather than in the system locale data base.  */
-extern char *bindtextdomain PARAMS ((const char *__domainname,
-				  const char *__dirname));
-extern char *bindtextdomain__ PARAMS ((const char *__domainname,
-				    const char *__dirname));
-
-#if ENABLE_NLS
-
-/* Solaris 2.3 has the gettext function but dcgettext is missing.
-   So we omit this optimization for Solaris 2.3.  BTW, Solaris 2.4
-   has dcgettext.  */
-# if !HAVE_CATGETS && (!HAVE_GETTEXT || HAVE_DCGETTEXT)
-
-#  define gettext(Msgid)						      \
-     dgettext (NULL, Msgid)
-
-#  define dgettext(Domainname, Msgid)					      \
-     dcgettext (Domainname, Msgid, LC_MESSAGES)
-
-#  if defined __GNUC__ && __GNUC__ == 2 && __GNUC_MINOR__ >= 7
-/* This global variable is defined in loadmsgcat.c.  We need a sign,
-   whether a new catalog was loaded, which can be associated with all
-   translations.  */
-extern int _nl_msg_cat_cntr;
-
-#   define dcgettext(Domainname, Msgid, Category)			      \
-  (__extension__							      \
-   ({									      \
-     char *__result;							      \
-     if (__builtin_constant_p (Msgid))					      \
-       {								      \
-	 static char *__translation__;					      \
-	 static int __catalog_counter__;				      \
-	 if (! __translation__ || __catalog_counter__ != _nl_msg_cat_cntr)    \
-	   {								      \
-	     __translation__ =						      \
-	       dcgettext__ (Domainname, Msgid, Category);		      \
-	     __catalog_counter__ = _nl_msg_cat_cntr;			      \
-	   }								      \
-	 __result = __translation__;					      \
-       }								      \
-     else								      \
-       __result = dcgettext__ (Domainname, Msgid, Category);		      \
-     __result;								      \
-    }))
-#  endif
-# endif
-
-#else
-
-# define gettext(Msgid) (Msgid)
-# define dgettext(Domainname, Msgid) (Msgid)
-# define dcgettext(Domainname, Msgid, Category) (Msgid)
-# define textdomain(Domainname) ((char *) Domainname)
-# define bindtextdomain(Domainname, Dirname) ((char *) Dirname)
-
-#endif
-
-/* @@ begin of epilog @@ */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

intl/linux-msg.sed

@@ -1,100 +0,0 @@
-# po2msg.sed - Convert Uniforum style .po file to Linux style .msg file
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#
-# The first directive in the .msg should be the definition of the
-# message set number.  We use always set number 1.
-#
-1 {
-  i\
-$set 1 # Automatically created by po2msg.sed
-  h
-  s/.*/0/
-  x
-}
-#
-# Mitch's old catalog format does not allow comments.
-#
-# We copy the original message as a comment into the .msg file.
-#
-/^msgid/ {
-  s/msgid[ 	]*"//
-#
-# This does not work now with the new format.
-# /"$/! {
-#   s/\\$//
-#   s/$/ ... (more lines following)"/
-# }
-  x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-  td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
-  :d
-  s/9\(_*\)$/_\1/
-  td
-# Assure at least one digit is available.
-  s/^\(_*\)$/0\1/
-# Increment the last digit.
-  s/8\(_*\)$/9\1/
-  s/7\(_*\)$/8\1/
-  s/6\(_*\)$/7\1/
-  s/5\(_*\)$/6\1/
-  s/4\(_*\)$/5\1/
-  s/3\(_*\)$/4\1/
-  s/2\(_*\)$/3\1/
-  s/1\(_*\)$/2\1/
-  s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
-  s/_/0/g
-  x
-  G
-  s/\(.*\)"\n\([0-9]*\)/$ #\2 Original Message:(\1)/p
-}
-#
-# The .msg file contains, other then the .po file, only the translations
-# but each given a unique ID.  Starting from 1 and incrementing by 1 for
-# each message we assign them to the messages.
-# It is important that the .po file used to generate the cat-id-tbl.c file
-# (with po-to-tbl) is the same as the one used here.  (At least the order
-# of declarations must not be changed.)
-#
-/^msgstr/ {
-  s/msgstr[ 	]*"\(.*\)"/# \1/
-# Clear substitution flag.
-  tb
-# Append the next line.
-  :b
-  N
-# Look whether second part is continuation line.
-  s/\(.*\n\)"\(.*\)"/\1\2/
-# Yes, then branch.
-  ta
-  P
-  D
-# Note that D includes a jump to the start!!
-# We found a continuation line.  But before printing insert '\'.
-  :a
-  s/\(.*\)\(\n.*\)/\1\\\2/
-  P
-# We cannot use D here.
-  s/.*\n\(.*\)/\1/
-  tb
-}
-d

intl/loadinfo.h

@@ -1,78 +0,0 @@
-/* Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef PARAMS
-# if __STDC__
-#  define PARAMS(args) args
-# else
-#  define PARAMS(args) ()
-# endif
-#endif
-
-/* Encoding of locale name parts.  */
-#define CEN_REVISION		1
-#define CEN_SPONSOR		2
-#define CEN_SPECIAL		4
-#define XPG_NORM_CODESET	8
-#define XPG_CODESET		16
-#define TERRITORY		32
-#define CEN_AUDIENCE		64
-#define XPG_MODIFIER		128
-
-#define CEN_SPECIFIC	(CEN_REVISION|CEN_SPONSOR|CEN_SPECIAL|CEN_AUDIENCE)
-#define XPG_SPECIFIC	(XPG_CODESET|XPG_NORM_CODESET|XPG_MODIFIER)
-
-
-struct loaded_l10nfile
-{
-  const char *filename;
-  int decided;
-
-  const void *data;
-
-  struct loaded_l10nfile *next;
-  struct loaded_l10nfile *successor[1];
-};
-
-
-extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
-						  size_t name_len));
-
-extern struct loaded_l10nfile *
-_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
-			    const char *dirlist, size_t dirlist_len, int mask,
-			    const char *language, const char *territory,
-			    const char *codeset,
-			    const char *normalized_codeset,
-			    const char *modifier, const char *special,
-			    const char *sponsor, const char *revision,
-			    const char *filename, int do_allocate));
-
-
-extern const char *_nl_expand_alias PARAMS ((const char *name));
-
-extern int _nl_explode_name PARAMS ((char *name, const char **language,
-				     const char **modifier,
-				     const char **territory,
-				     const char **codeset,
-				     const char **normalized_codeset,
-				     const char **special,
-				     const char **sponsor,
-				     const char **revision));
-
-extern char *_nl_find_language PARAMS ((const char *name));

intl/loadmsgcat.c

@@ -1,220 +0,0 @@
-/* Load needed message catalogs.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
-    || (defined _LIBC && defined _POSIX_MAPPED_FILES)
-# include <sys/mman.h>
-# undef HAVE_MMAP
-# define HAVE_MMAP	1
-#else
-# undef HAVE_MMAP
-#endif
-
-#include "gettext.h"
-#include "gettextP.h"
-
-/* @@ end of prolog @@ */
-
-#ifdef _LIBC
-/* Rename the non ISO C functions.  This is required by the standard
-   because some ISO C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# define open   __open
-# define close  __close
-# define read   __read
-# define mmap   __mmap
-# define munmap __munmap
-#endif
-
-/* We need a sign, whether a new catalog was loaded, which can be associated
-   with all translations.  This is important if the translations are
-   cached by one of GCC's features.  */
-int _nl_msg_cat_cntr = 0;
-
-
-/* Load the message catalogs specified by FILENAME.  If it is no valid
-   message catalog do nothing.  */
-void
-internal_function
-_nl_load_domain (domain_file)
-     struct loaded_l10nfile *domain_file;
-{
-  int fd;
-  size_t size;
-  struct stat st;
-  struct mo_file_header *data = (struct mo_file_header *) -1;
-  int use_mmap = 0;
-  struct loaded_domain *domain;
-
-  domain_file->decided = 1;
-  domain_file->data = NULL;
-
-  /* If the record does not represent a valid locale the FILENAME
-     might be NULL.  This can happen when according to the given
-     specification the locale file name is different for XPG and CEN
-     syntax.  */
-  if (domain_file->filename == NULL)
-    return;
-
-  /* Try to open the addressed file.  */
-  fd = open (domain_file->filename, O_RDONLY);
-  if (fd == -1)
-    return;
-
-  /* We must know about the size of the file.  */
-  if (fstat (fd, &st) != 0
-      || (size = (size_t) st.st_size) != st.st_size
-      || size < sizeof (struct mo_file_header))
-    {
-      /* Something went wrong.  */
-      close (fd);
-      return;
-    }
-
-#ifdef HAVE_MMAP
-  /* Now we are ready to load the file.  If mmap() is available we try
-     this first.  If not available or it failed we try to load it.  */
-  data = (struct mo_file_header *) mmap (NULL, size, PROT_READ,
-					 MAP_PRIVATE, fd, 0);
-
-  if (data != (struct mo_file_header *) -1)
-    {
-      /* mmap() call was successful.  */
-      close (fd);
-      use_mmap = 1;
-    }
-#endif
-
-  /* If the data is not yet available (i.e. mmap'ed) we try to load
-     it manually.  */
-  if (data == (struct mo_file_header *) -1)
-    {
-      size_t to_read;
-      char *read_ptr;
-
-      data = (struct mo_file_header *) malloc (size);
-      if (data == NULL)
-	return;
-
-      to_read = size;
-      read_ptr = (char *) data;
-      do
-	{
-	  long int nb = (long int) read (fd, read_ptr, to_read);
-	  if (nb == -1)
-	    {
-	      close (fd);
-	      return;
-	    }
-
-	  read_ptr += nb;
-	  to_read -= nb;
-	}
-      while (to_read > 0);
-
-      close (fd);
-    }
-
-  /* Using the magic number we can test whether it really is a message
-     catalog file.  */
-  if (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED)
-    {
-      /* The magic number is wrong: not a message catalog file.  */
-#ifdef HAVE_MMAP
-      if (use_mmap)
-	munmap ((caddr_t) data, size);
-      else
-#endif
-	free (data);
-      return;
-    }
-
-  domain_file->data
-    = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
-  if (domain_file->data == NULL)
-    return;
-
-  domain = (struct loaded_domain *) domain_file->data;
-  domain->data = (char *) data;
-  domain->use_mmap = use_mmap;
-  domain->mmap_size = size;
-  domain->must_swap = data->magic != _MAGIC;
-
-  /* Fill in the information about the available tables.  */
-  switch (W (domain->must_swap, data->revision))
-    {
-    case 0:
-      domain->nstrings = W (domain->must_swap, data->nstrings);
-      domain->orig_tab = (struct string_desc *)
-	((char *) data + W (domain->must_swap, data->orig_tab_offset));
-      domain->trans_tab = (struct string_desc *)
-	((char *) data + W (domain->must_swap, data->trans_tab_offset));
-      domain->hash_size = W (domain->must_swap, data->hash_tab_size);
-      domain->hash_tab = (nls_uint32 *)
-	((char *) data + W (domain->must_swap, data->hash_tab_offset));
-      break;
-    default:
-      /* This is an invalid revision.  */
-#ifdef HAVE_MMAP
-      if (use_mmap)
-	munmap ((caddr_t) data, size);
-      else
-#endif
-	free (data);
-      free (domain);
-      domain_file->data = NULL;
-      return;
-    }
-
-  /* Show that one domain is changed.  This might make some cached
-     translations invalid.  */
-  ++_nl_msg_cat_cntr;
-}
-
-
-#ifdef _LIBC
-void
-internal_function
-_nl_unload_domain (domain)
-     struct loaded_domain *domain;
-{
-#ifdef _POSIX_MAPPED_FILES
-  if (domain->use_mmap)
-    munmap ((caddr_t) domain->data, domain->mmap_size);
-  else
-#endif	/* _POSIX_MAPPED_FILES */
-    free ((void *) domain->data);
-
-  free (domain);
-}
-#endif

intl/localealias.c

@@ -1,438 +0,0 @@
-/* Handle aliases for locale names.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <ctype.h>
-#include <stdio.h>
-#include <sys/types.h>
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if defined HAVE_ALLOCA_H || defined _LIBC
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #pragma alloca
-#  else
-#   ifndef alloca
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-#  define _GNU_SOURCE	1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#include "gettext.h"
-#include "gettextP.h"
-
-/* @@ end of prolog @@ */
-
-#ifdef _LIBC
-/* Rename the non ANSI C functions.  This is required by the standard
-   because some ANSI C functions will require linking with this object
-   file and the name space must not be polluted.  */
-# define strcasecmp __strcasecmp
-
-# ifndef mempcpy
-#  define mempcpy __mempcpy
-# endif
-# define HAVE_MEMPCPY	1
-
-/* We need locking here since we can be called from different places.  */
-# include <bits/libc-lock.h>
-
-__libc_lock_define_initialized (static, lock);
-#endif
-
-#ifndef internal_function
-# define internal_function
-#endif
-
-/* For those loosing systems which don't have `alloca' we have to add
-   some additional code emulating it.  */
-#ifdef HAVE_ALLOCA
-/* Nothing has to be done.  */
-# define ADD_BLOCK(list, address) /* nothing */
-# define FREE_BLOCKS(list) /* nothing */
-#else
-struct block_list
-{
-  void *address;
-  struct block_list *next;
-};
-# define ADD_BLOCK(list, addr)						      \
-  do {									      \
-    struct block_list *newp = (struct block_list *) malloc (sizeof (*newp));  \
-    /* If we cannot get a free block we cannot add the new element to	      \
-       the list.  */							      \
-    if (newp != NULL) {							      \
-      newp->address = (addr);						      \
-      newp->next = (list);						      \
-      (list) = newp;							      \
-    }									      \
-  } while (0)
-# define FREE_BLOCKS(list)						      \
-  do {									      \
-    while (list != NULL) {						      \
-      struct block_list *old = list;					      \
-      list = list->next;						      \
-      free (old);							      \
-    }									      \
-  } while (0)
-# undef alloca
-# define alloca(size) (malloc (size))
-#endif	/* have alloca */
-
-#if defined _LIBC_REENTRANT || defined HAVE_FGETS_UNLOCKED
-# undef fgets
-# define fgets(buf, len, s) fgets_unlocked (buf, len, s)
-#endif
-#if defined _LIBC_REENTRANT || defined HAVE_FEOF_UNLOCKED
-# undef feof
-# define feof(s) feof_unlocked (s)
-#endif
-
-
-struct alias_map
-{
-  const char *alias;
-  const char *value;
-};
-
-
-static char *string_space = NULL;
-static size_t string_space_act = 0;
-static size_t string_space_max = 0;
-static struct alias_map *map;
-static size_t nmap = 0;
-static size_t maxmap = 0;
-
-
-/* Prototypes for local functions.  */
-static size_t read_alias_file PARAMS ((const char *fname, int fname_len))
-     internal_function;
-static void extend_alias_table PARAMS ((void));
-static int alias_compare PARAMS ((const struct alias_map *map1,
-				  const struct alias_map *map2));
-
-
-const char *
-_nl_expand_alias (name)
-    const char *name;
-{
-  static const char *locale_alias_path = LOCALE_ALIAS_PATH;
-  struct alias_map *retval;
-  const char *result = NULL;
-  size_t added;
-
-#ifdef _LIBC
-  __libc_lock_lock (lock);
-#endif
-
-  do
-    {
-      struct alias_map item;
-
-      item.alias = name;
-
-      if (nmap > 0)
-	retval = (struct alias_map *) bsearch (&item, map, nmap,
-					       sizeof (struct alias_map),
-					       (int (*) PARAMS ((const void *,
-								 const void *))
-						) alias_compare);
-      else
-	retval = NULL;
-
-      /* We really found an alias.  Return the value.  */
-      if (retval != NULL)
-	{
-	  result = retval->value;
-	  break;
-	}
-
-      /* Perhaps we can find another alias file.  */
-      added = 0;
-      while (added == 0 && locale_alias_path[0] != '\0')
-	{
-	  const char *start;
-
-	  while (locale_alias_path[0] == ':')
-	    ++locale_alias_path;
-	  start = locale_alias_path;
-
-	  while (locale_alias_path[0] != '\0' && locale_alias_path[0] != ':')
-	    ++locale_alias_path;
-
-	  if (start < locale_alias_path)
-	    added = read_alias_file (start, locale_alias_path - start);
-	}
-    }
-  while (added != 0);
-
-#ifdef _LIBC
-  __libc_lock_unlock (lock);
-#endif
-
-  return result;
-}
-
-
-static size_t
-internal_function
-read_alias_file (fname, fname_len)
-     const char *fname;
-     int fname_len;
-{
-#ifndef HAVE_ALLOCA
-  struct block_list *block_list = NULL;
-#endif
-  FILE *fp;
-  char *full_fname;
-  size_t added;
-  static const char aliasfile[] = "/locale.alias";
-
-  full_fname = (char *) alloca (fname_len + sizeof aliasfile);
-  ADD_BLOCK (block_list, full_fname);
-#ifdef HAVE_MEMPCPY
-  mempcpy (mempcpy (full_fname, fname, fname_len),
-	   aliasfile, sizeof aliasfile);
-#else
-  memcpy (full_fname, fname, fname_len);
-  memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile);
-#endif
-
-  fp = fopen (full_fname, "r");
-  if (fp == NULL)
-    {
-      FREE_BLOCKS (block_list);
-      return 0;
-    }
-
-  added = 0;
-  while (!feof (fp))
-    {
-      /* It is a reasonable approach to use a fix buffer here because
-	 a) we are only interested in the first two fields
-	 b) these fields must be usable as file names and so must not
-	    be that long
-       */
-      char buf[BUFSIZ];
-      char *alias;
-      char *value;
-      char *cp;
-
-      if (fgets (buf, sizeof buf, fp) == NULL)
-	/* EOF reached.  */
-	break;
-
-      /* Possibly not the whole line fits into the buffer.  Ignore
-	 the rest of the line.  */
-      if (strchr (buf, '\n') == NULL)
-	{
-	  char altbuf[BUFSIZ];
-	  do
-	    if (fgets (altbuf, sizeof altbuf, fp) == NULL)
-	      /* Make sure the inner loop will be left.  The outer loop
-		 will exit at the `feof' test.  */
-	      break;
-	  while (strchr (altbuf, '\n') == NULL);
-	}
-
-      cp = buf;
-      /* Ignore leading white space.  */
-      while (isspace (cp[0]))
-	++cp;
-
-      /* A leading '#' signals a comment line.  */
-      if (cp[0] != '\0' && cp[0] != '#')
-	{
-	  alias = cp++;
-	  while (cp[0] != '\0' && !isspace (cp[0]))
-	    ++cp;
-	  /* Terminate alias name.  */
-	  if (cp[0] != '\0')
-	    *cp++ = '\0';
-
-	  /* Now look for the beginning of the value.  */
-	  while (isspace (cp[0]))
-	    ++cp;
-
-	  if (cp[0] != '\0')
-	    {
-	      size_t alias_len;
-	      size_t value_len;
-
-	      value = cp++;
-	      while (cp[0] != '\0' && !isspace (cp[0]))
-		++cp;
-	      /* Terminate value.  */
-	      if (cp[0] == '\n')
-		{
-		  /* This has to be done to make the following test
-		     for the end of line possible.  We are looking for
-		     the terminating '\n' which do not overwrite here.  */
-		  *cp++ = '\0';
-		  *cp = '\n';
-		}
-	      else if (cp[0] != '\0')
-		*cp++ = '\0';
-
-	      if (nmap >= maxmap)
-		extend_alias_table ();
-
-	      alias_len = strlen (alias) + 1;
-	      value_len = strlen (value) + 1;
-
-	      if (string_space_act + alias_len + value_len > string_space_max)
-		{
-		  /* Increase size of memory pool.  */
-		  size_t new_size = (string_space_max
-				     + (alias_len + value_len > 1024
-					? alias_len + value_len : 1024));
-		  char *new_pool = (char *) realloc (string_space, new_size);
-		  if (new_pool == NULL)
-		    {
-		      FREE_BLOCKS (block_list);
-		      return added;
-		    }
-		  string_space = new_pool;
-		  string_space_max = new_size;
-		}
-
-	      map[nmap].alias = memcpy (&string_space[string_space_act],
-					alias, alias_len);
-	      string_space_act += alias_len;
-
-	      map[nmap].value = memcpy (&string_space[string_space_act],
-					value, value_len);
-	      string_space_act += value_len;
-
-	      ++nmap;
-	      ++added;
-	    }
-	}
-    }
-
-  /* Should we test for ferror()?  I think we have to silently ignore
-     errors.  --drepper  */
-  fclose (fp);
-
-  if (added > 0)
-    qsort (map, nmap, sizeof (struct alias_map),
-	   (int (*) PARAMS ((const void *, const void *))) alias_compare);
-
-  FREE_BLOCKS (block_list);
-  return added;
-}
-
-
-static void
-extend_alias_table ()
-{
-  size_t new_size;
-  struct alias_map *new_map;
-
-  new_size = maxmap == 0 ? 100 : 2 * maxmap;
-  new_map = (struct alias_map *) realloc (map, (new_size
-						* sizeof (struct alias_map)));
-  if (new_map == NULL)
-    /* Simply don't extend: we don't have any more core.  */
-    return;
-
-  map = new_map;
-  maxmap = new_size;
-}
-
-
-#ifdef _LIBC
-static void __attribute__ ((unused))
-free_mem (void)
-{
-  if (string_space != NULL)
-    free (string_space);
-  if (map != NULL)
-    free (map);
-}
-text_set_element (__libc_subfreeres, free_mem);
-#endif
-
-
-static int
-alias_compare (map1, map2)
-     const struct alias_map *map1;
-     const struct alias_map *map2;
-{
-#if defined _LIBC || defined HAVE_STRCASECMP
-  return strcasecmp (map1->alias, map2->alias);
-#else
-  const unsigned char *p1 = (const unsigned char *) map1->alias;
-  const unsigned char *p2 = (const unsigned char *) map2->alias;
-  unsigned char c1, c2;
-
-  if (p1 == p2)
-    return 0;
-
-  do
-    {
-      /* I know this seems to be odd but the tolower() function in
-	 some systems libc cannot handle nonalpha characters.  */
-      c1 = isupper (*p1) ? tolower (*p1) : *p1;
-      c2 = isupper (*p2) ? tolower (*p2) : *p2;
-      if (c1 == '\0')
-	break;
-      ++p1;
-      ++p2;
-    }
-  while (c1 == c2);
-
-  return c1 - c2;
-#endif
-}

intl/po2tbl.sed.in

@@ -1,102 +0,0 @@
-# po2tbl.sed - Convert Uniforum style .po file to lookup table for catgets
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-1 {
-  i\
-/* Automatically generated by po2tbl.sed from @PACKAGE NAME@.pot.  */\
-\
-#if HAVE_CONFIG_H\
-# include <config.h>\
-#endif\
-\
-#include "libgettext.h"\
-\
-const struct _msg_ent _msg_tbl[] = {
-  h
-  s/.*/0/
-  x
-}
-#
-# Write msgid entries in C array form.
-#
-/^msgid/ {
-  s/msgid[ 	]*\(".*"\)/  {\1/
-  tb
-# Append the next line
-  :b
-  N
-# Look whether second part is continuation line.
-  s/\(.*\)"\(\n\)"\(.*"\)/\1\2\3/
-# Yes, then branch.
-  ta
-# Because we assume that the input file correctly formed the line
-# just read cannot be again be a msgid line.  So it's safe to ignore
-# it.
-  s/\(.*\)\n.*/\1/
-  bc
-# We found a continuation line.  But before printing insert '\'.
-  :a
-  s/\(.*\)\(\n.*\)/\1\\\2/
-  P
-# We cannot use D here.
-  s/.*\n\(.*\)/\1/
-# Some buggy seds do not clear the `successful substitution since last ``t'''
-# flag on `N', so we do a `t' here to clear it.
-  tb
-# Not reached
-  :c
-  x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-  td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
-  :d
-  s/9\(_*\)$/_\1/
-  td
-# Assure at least one digit is available.
-  s/^\(_*\)$/0\1/
-# Increment the last digit.
-  s/8\(_*\)$/9\1/
-  s/7\(_*\)$/8\1/
-  s/6\(_*\)$/7\1/
-  s/5\(_*\)$/6\1/
-  s/4\(_*\)$/5\1/
-  s/3\(_*\)$/4\1/
-  s/2\(_*\)$/3\1/
-  s/1\(_*\)$/2\1/
-  s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
-  s/_/0/g
-  x
-  G
-  s/\(.*\)\n\([0-9]*\)/\1, \2},/
-  s/\(.*\)"$/\1/
-  p
-}
-#
-# Last line.
-#
-$ {
-  i\
-};\
-
-  g
-  s/0*\(.*\)/int _msg_tbl_length = \1;/p
-}
-d

intl/textdomain.c

@@ -1,108 +0,0 @@
-/* Implementation of the textdomain(3) function.
-   Copyright (C) 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-   Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
-
-#if defined STDC_HEADERS || defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-#  define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "libgettext.h"
-#endif
-
-/* @@ end of prolog @@ */
-
-/* Name of the default text domain.  */
-extern const char _nl_default_default_domain[];
-
-/* Default text domain in which entries for gettext(3) are to be found.  */
-extern const char *_nl_current_default_domain;
-
-
-/* Names for the libintl functions are a problem.  They must not clash
-   with existing names and they should follow ANSI C.  But this source
-   code is also used in GNU C Library where the names have a __
-   prefix.  So we have to make a difference here.  */
-#ifdef _LIBC
-# define TEXTDOMAIN __textdomain
-# ifndef strdup
-#  define strdup(str) __strdup (str)
-# endif
-#else
-# define TEXTDOMAIN textdomain__
-#endif
-
-/* Set the current default message catalog to DOMAINNAME.
-   If DOMAINNAME is null, return the current default.
-   If DOMAINNAME is "", reset to the default of "messages".  */
-char *
-TEXTDOMAIN (domainname)
-     const char *domainname;
-{
-  char *old;
-
-  /* A NULL pointer requests the current setting.  */
-  if (domainname == NULL)
-    return (char *) _nl_current_default_domain;
-
-  old = (char *) _nl_current_default_domain;
-
-  /* If domain name is the null string set to default domain "messages".  */
-  if (domainname[0] == '\0'
-      || strcmp (domainname, _nl_default_default_domain) == 0)
-    _nl_current_default_domain = _nl_default_default_domain;
-  else
-    {
-      /* If the following malloc fails `_nl_current_default_domain'
-	 will be NULL.  This value will be returned and so signals we
-	 are out of core.  */
-#if defined _LIBC || defined HAVE_STRDUP
-      _nl_current_default_domain = strdup (domainname);
-#else
-      size_t len = strlen (domainname) + 1;
-      char *cp = (char *) malloc (len);
-      if (cp != NULL)
-	memcpy (cp, domainname, len);
-      _nl_current_default_domain = cp;
-#endif
-    }
-
-  if (old != _nl_default_default_domain)
-    free (old);
-
-  return (char *) _nl_current_default_domain;
-}
-
-#ifdef _LIBC
-/* Alias for function name in GNU C Library.  */
-weak_alias (__textdomain, textdomain);
-#endif

intl/xopen-msg.sed

@@ -1,104 +0,0 @@
-# po2msg.sed - Convert Uniforum style .po file to X/Open style .msg file
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#
-# The first directive in the .msg should be the definition of the
-# message set number.  We use always set number 1.
-#
-1 {
-  i\
-$set 1 # Automatically created by po2msg.sed
-  h
-  s/.*/0/
-  x
-}
-#
-# We copy all comments into the .msg file.  Perhaps they can help.
-#
-/^#/ s/^#[ 	]*/$ /p
-#
-# We copy the original message as a comment into the .msg file.
-#
-/^msgid/ {
-# Does not work now
-#  /"$/! {
-#    s/\\$//
-#    s/$/ ... (more lines following)"/
-#  }
-  s/^msgid[ 	]*"\(.*\)"$/$ Original Message: \1/
-  p
-}
-#
-# The .msg file contains, other then the .po file, only the translations
-# but each given a unique ID.  Starting from 1 and incrementing by 1 for
-# each message we assign them to the messages.
-# It is important that the .po file used to generate the cat-id-tbl.c file
-# (with po-to-tbl) is the same as the one used here.  (At least the order
-# of declarations must not be changed.)
-#
-/^msgstr/ {
-  s/msgstr[ 	]*"\(.*\)"/\1/
-  x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-  td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
-  :d
-  s/9\(_*\)$/_\1/
-  td
-# Assure at least one digit is available.
-  s/^\(_*\)$/0\1/
-# Increment the last digit.
-  s/8\(_*\)$/9\1/
-  s/7\(_*\)$/8\1/
-  s/6\(_*\)$/7\1/
-  s/5\(_*\)$/6\1/
-  s/4\(_*\)$/5\1/
-  s/3\(_*\)$/4\1/
-  s/2\(_*\)$/3\1/
-  s/1\(_*\)$/2\1/
-  s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
-  s/_/0/g
-  x
-# Bring the line in the format `<number> <message>'
-  G
-  s/^[^\n]*$/& /
-  s/\(.*\)\n\([0-9]*\)/\2 \1/
-# Clear flag from last substitution.
-  tb
-# Append the next line.
-  :b
-  N
-# Look whether second part is a continuation line.
-  s/\(.*\n\)"\(.*\)"/\1\2/
-# Yes, then branch.
-  ta
-  P
-  D
-# Note that `D' includes a jump to the start!!
-# We found a continuation line.  But before printing insert '\'.
-  :a
-  s/\(.*\)\(\n.*\)/\1\\\2/
-  P
-# We cannot use the sed command `D' here
-  s/.*\n\(.*\)/\1/
-  tb
-}
-d

m4/.cvsignore

@@ -0,0 +1,2 @@
+Makefile.in
+Makefile

m4/ChangeLog

@@ -0,0 +1,29 @@
+2002-08-21  gettextize  <bug-gnu-gettext@gnu.org>
+
+	* gettext.m4: Upgrade to gettext-0.11.5.
+	* ulonglong.m4: New file, from gettext-0.11.5.
+	* iconv.m4: Upgrade to gettext-0.11.5.
+	* intdiv0.m4: New file, from gettext-0.11.5.
+	* inttypes.m4: New file, from gettext-0.11.5.
+	* inttypes_h.m4: New file, from gettext-0.11.5.
+	* inttypes-pri.m4: New file, from gettext-0.11.5.
+	* lcmessage.m4: Upgrade to gettext-0.11.5.
+	* lib-link.m4: Upgrade to gettext-0.11.5.
+	* stdint_h.m4: New file, from gettext-0.11.5.
+	* uintmax_t.m4: New file, from gettext-0.11.5.
+	* Makefile.am (EXTRA_DIST): Add the new files.
+
+2002-06-03  gettextize  <bug-gnu-gettext@gnu.org>
+
+	* codeset.m4: Upgrade to gettext-0.11.2.
+	* gettext.m4: Upgrade to gettext-0.11.2.
+	* glibc21.m4: Upgrade to gettext-0.11.2.
+	* iconv.m4: Upgrade to gettext-0.11.2.
+	* isc-posix.m4: New file, from gettext-0.11.2.
+	* lcmessage.m4: Upgrade to gettext-0.11.2.
+	* lib-ld.m4: New file, from gettext-0.11.2.
+	* lib-link.m4: New file, from gettext-0.11.2.
+	* lib-prefix.m4: New file, from gettext-0.11.2.
+	* progtest.m4: Upgrade to gettext-0.11.2.
+	* Makefile.am (EXTRA_DIST): Add the new files.
+

m4/Makefile.am

@@ -0,0 +1,4 @@
+EXTRA_DIST = ulonglong.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 \
+	     stdint_h.m4 uintmax_t.m4 isc-posix.m4 lib-ld.m4 lib-link.m4 \
+	     lib-prefix.m4 codeset.m4 glibc21.m4 progtest.m4 gettext.m4 \
+	     iconv.m4 lcmessage.m4

m4/codeset.m4

@@ -0,0 +1,23 @@
+# codeset.m4 serial AM1 (gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+  AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+    [AC_TRY_LINK([#include <langinfo.h>],
+      [char* cs = nl_langinfo(CODESET);],
+      am_cv_langinfo_codeset=yes,
+      am_cv_langinfo_codeset=no)
+    ])
+  if test $am_cv_langinfo_codeset = yes; then
+    AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+      [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+  fi
+])

m4/gettext.m4

@@ -0,0 +1,587 @@
+# gettext.m4 serial 17 (gettext-0.11.5)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2002.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl    default (if it is not specified or empty) is 'no-libtool'.
+dnl    INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl    and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl    If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl    depending on --{enable,disable}-{shared,static} and on the presence of
+dnl    AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl    $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl    implementations (in libc or libintl) without the ngettext() function
+dnl    will be ignored.  If NEEDSYMBOL is specified and is
+dnl    'need-formatstring-macros', then GNU gettext implementations that don't
+dnl    support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries.  If empty,
+dnl    the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl    and used.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl    Catalog format: none
+dnl    Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+  dnl Argument checking.
+  ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+    [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+  ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+    [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+  define(gt_included_intl, ifelse([$1], [external], [no], [yes]))
+  define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], []))
+
+  AC_REQUIRE([AM_PO_SUBDIRS])dnl
+  ifelse(gt_included_intl, yes, [
+    AC_REQUIRE([AM_INTL_SUBDIR])dnl
+  ])
+
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Sometimes libintl requires libiconv, so first search for libiconv.
+  dnl Ideally we would do this search only after the
+  dnl      if test "$USE_NLS" = "yes"; then
+  dnl        if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+  dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+  dnl the configure script would need to contain the same shell code
+  dnl again, outside any 'if'. There are two solutions:
+  dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+  dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+  dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+  dnl documented, we avoid it.
+  ifelse(gt_included_intl, yes, , [
+    AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+  ])
+
+  AC_MSG_CHECKING([whether NLS is requested])
+  dnl Default is enabled NLS
+  AC_ARG_ENABLE(nls,
+    [  --disable-nls           do not use Native Language Support],
+    USE_NLS=$enableval, USE_NLS=yes)
+  AC_MSG_RESULT($USE_NLS)
+  AC_SUBST(USE_NLS)
+
+  ifelse(gt_included_intl, yes, [
+    BUILD_INCLUDED_LIBINTL=no
+    USE_INCLUDED_LIBINTL=no
+  ])
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+  dnl If we use NLS figure out what method
+  if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+    ifelse(gt_included_intl, yes, [
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH(included-gettext,
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+    ])
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If GNU gettext is available we use this.  Else we have
+        dnl to fall back to GNU NLS library.
+
+        dnl Add a version number to the cache macros.
+        define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1)))
+        define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc])
+        define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl])
+
+        AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+         [AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+            [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings],
+            gt_cv_func_gnugettext_libc=yes,
+            gt_cv_func_gnugettext_libc=no)])
+
+        if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+          dnl Sometimes libintl requires libiconv, so first search for libiconv.
+          ifelse(gt_included_intl, yes, , [
+            AM_ICONV_LINK
+          ])
+          dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+          dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+          dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+          dnl even if libiconv doesn't exist.
+          AC_LIB_LINKFLAGS_BODY([intl])
+          AC_CACHE_CHECK([for GNU gettext in libintl],
+            gt_cv_func_gnugettext_libintl,
+           [gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+            dnl Now see whether libintl exists and does not depend on libiconv.
+            AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+              [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+              gt_cv_func_gnugettext_libintl=yes,
+              gt_cv_func_gnugettext_libintl=no)
+            dnl Now see whether libintl exists and depends on libiconv.
+            if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+                [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+               [LIBINTL="$LIBINTL $LIBICONV"
+                LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                gt_cv_func_gnugettext_libintl=yes
+               ])
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"])
+        fi
+
+        dnl If an already present or preinstalled GNU gettext() is found,
+        dnl use it.  But if this macro is used in GNU gettext, and GNU
+        dnl gettext is already preinstalled in libintl, we update this
+        dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
+        if test "$gt_cv_func_gnugettext_libc" = "yes" \
+           || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
+                && test "$PACKAGE" != gettext; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+          dnl Reset the values set by searching for libintl.
+          LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+    ifelse(gt_included_intl, yes, [
+        if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+          dnl GNU gettext is not found in the C library.
+          dnl Fall back on included GNU gettext library.
+          nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        INTLOBJS="\$(GETTOBJS)"
+        BUILD_INCLUDED_LIBINTL=yes
+        USE_INCLUDED_LIBINTL=yes
+        LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV"
+        LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV"
+        LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+      fi
+
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions to use GNU gettext tools.
+        CATOBJEXT=.gmo
+      fi
+    ])
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+      AC_DEFINE(ENABLE_NLS, 1,
+        [Define to 1 if translation of program messages to the user's native language
+   is requested.])
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+        AC_MSG_CHECKING([how to link with libintl])
+        AC_MSG_RESULT([$LIBINTL])
+        AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+      fi
+
+      dnl For backward compatibility. Some packages may be using this.
+      AC_DEFINE(HAVE_GETTEXT, 1,
+       [Define if the GNU gettext() function is already present or preinstalled.])
+      AC_DEFINE(HAVE_DCGETTEXT, 1,
+       [Define if the GNU dcgettext() function is already present or preinstalled.])
+    fi
+
+    dnl We need to process the po/ directory.
+    POSUB=po
+  fi
+
+  ifelse(gt_included_intl, yes, [
+    dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+    dnl to 'yes' because some of the testsuite requires it.
+    if test "$PACKAGE" = gettext; then
+      BUILD_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST(BUILD_INCLUDED_LIBINTL)
+    AC_SUBST(USE_INCLUDED_LIBINTL)
+    AC_SUBST(CATOBJEXT)
+    AC_SUBST(INTLOBJS)
+
+    dnl For backward compatibility. Some configure.ins may be using this.
+    nls_cv_header_intl=
+    nls_cv_header_libgt=
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    DATADIRNAME=share
+    AC_SUBST(DATADIRNAME)
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INSTOBJEXT=.mo
+    AC_SUBST(INSTOBJEXT)
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    GENCAT=gencat
+    AC_SUBST(GENCAT)
+
+    dnl Enable libtool support if the surrounding package wishes it.
+    INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+    AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+  ])
+
+  dnl For backward compatibility. Some Makefiles may be using this.
+  INTLLIBS="$LIBINTL"
+  AC_SUBST(INTLLIBS)
+
+  dnl Make all documented variables known to autoconf.
+  AC_SUBST(LIBINTL)
+  AC_SUBST(LTLIBINTL)
+  AC_SUBST(POSUB)
+])
+
+
+dnl Checks for all prerequisites of the po subdirectory,
+dnl except for USE_NLS.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+  AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+
+  dnl Perform the following tests also if --disable-nls has been given,
+  dnl because they are needed for "make dist" to work.
+
+  dnl Search for GNU msgfmt in the PATH.
+  dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+  dnl The second test excludes FreeBSD msgfmt.
+  AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+    [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+  dnl Search for GNU xgettext 0.11 or newer in the PATH.
+  dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+  dnl The second test excludes FreeBSD xgettext.
+  AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+    [$ac_dir/$ac_word --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  dnl Remove leftover from FreeBSD xgettext call.
+  rm -f messages.po
+
+  dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+  AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+    [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :)
+
+  dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+  dnl Test whether we really found GNU msgfmt.
+  if test "$GMSGFMT" != ":"; then
+    dnl If it is no GNU msgfmt we define it as : so that the
+    dnl Makefiles still can work.
+    if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+       (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+      : ;
+    else
+      GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+      AC_MSG_RESULT(
+        [found $GMSGFMT program is not GNU msgfmt; ignore it])
+      GMSGFMT=":"
+    fi
+  fi
+
+  dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+  dnl Test whether we really found GNU xgettext.
+  if test "$XGETTEXT" != ":"; then
+    dnl If it is no GNU xgettext we define it as : so that the
+    dnl Makefiles still can work.
+    if $XGETTEXT --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+       (if $XGETTEXT --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+      : ;
+    else
+      AC_MSG_RESULT(
+        [found xgettext program is not GNU xgettext; ignore it])
+      XGETTEXT=":"
+    fi
+    dnl Remove leftover from FreeBSD xgettext call.
+    rm -f messages.po
+  fi
+
+  AC_OUTPUT_COMMANDS([
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            # Hide the ALL_LINGUAS assigment from automake.
+            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+          fi
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          GMOFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done],
+   [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
+    # from automake.
+    eval 'ALL_LINGUAS''="$ALL_LINGUAS"'
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+   ])
+])
+
+
+dnl Checks for all prerequisites of the intl subdirectory,
+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
+dnl            USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
+AC_DEFUN([AM_INTL_SUBDIR],
+[
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+  AC_REQUIRE([AC_PROG_CC])dnl
+  AC_REQUIRE([AC_CANONICAL_HOST])dnl
+  AC_REQUIRE([AC_PROG_RANLIB])dnl
+  AC_REQUIRE([AC_ISC_POSIX])dnl
+  AC_REQUIRE([AC_HEADER_STDC])dnl
+  AC_REQUIRE([AC_C_CONST])dnl
+  AC_REQUIRE([AC_C_INLINE])dnl
+  AC_REQUIRE([AC_TYPE_OFF_T])dnl
+  AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+  AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+  AC_REQUIRE([AC_FUNC_MMAP])dnl
+  AC_REQUIRE([jm_GLIBC21])dnl
+  AC_REQUIRE([gt_INTDIV0])dnl
+  AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl
+  AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl
+  AC_REQUIRE([gt_INTTYPES_PRI])dnl
+
+  AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+  AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
+geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
+strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next])
+
+  AM_ICONV
+  AM_LANGINFO_CODESET
+  if test $ac_cv_header_locale_h = yes; then
+    AM_LC_MESSAGES
+  fi
+
+  dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+  dnl because plural.y uses bison specific features. It requires at least
+  dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+  dnl compile.
+  dnl bison is only needed for the maintainer (who touches plural.y). But in
+  dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+  dnl the rule in general Makefile. Now, some people carelessly touch the
+  dnl files or have a broken "make" program, hence the plural.c rule will
+  dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+  dnl present or too old.
+  AC_CHECK_PROGS([INTLBISON], [bison])
+  if test -z "$INTLBISON"; then
+    ac_verc_fail=yes
+  else
+    dnl Found it, now check the version.
+    AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+    ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+    case $ac_prog_version in
+      '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+      1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+         ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+      *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+    esac
+    AC_MSG_RESULT([$ac_prog_version])
+  fi
+  if test $ac_verc_fail = yes; then
+    INTLBISON=:
+  fi
+])
+
+
+AC_DEFUN([AM_MKINSTALLDIRS],
+[
+  dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+  dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
+  dnl Try to locate is.
+  MKINSTALLDIRS=
+  if test -n "$ac_aux_dir"; then
+    MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+  fi
+  if test -z "$MKINSTALLDIRS"; then
+    MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+  fi
+  AC_SUBST(MKINSTALLDIRS)
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])

m4/glibc21.m4

@@ -0,0 +1,32 @@
+# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([jm_GLIBC21],
+  [
+    AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+      ac_cv_gnu_library_2_1,
+      [AC_EGREP_CPP([Lucky GNU user],
+	[
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+  Lucky GNU user
+ #endif
+#endif
+	],
+	ac_cv_gnu_library_2_1=yes,
+	ac_cv_gnu_library_2_1=no)
+      ]
+    )
+    AC_SUBST(GLIBC21)
+    GLIBC21="$ac_cv_gnu_library_2_1"
+  ]
+)

m4/iconv.m4

@@ -0,0 +1,103 @@
+# iconv.m4 serial AM4 (gettext-0.11.3)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+  dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+  dnl those with the standalone portable GNU libiconv installed).
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+  dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed libiconv and not disabled its use
+  dnl via --without-libiconv-prefix, he wants to use it. The first
+  dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+  am_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+  AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+      [iconv_t cd = iconv_open("","");
+       iconv(cd,NULL,NULL,NULL,NULL);
+       iconv_close(cd);],
+      am_cv_func_iconv=yes)
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+        [iconv_t cd = iconv_open("","");
+         iconv(cd,NULL,NULL,NULL,NULL);
+         iconv_close(cd);],
+        am_cv_lib_iconv=yes
+        am_cv_func_iconv=yes)
+      LIBS="$am_save_LIBS"
+    fi
+  ])
+  if test "$am_cv_func_iconv" = yes; then
+    AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    AC_MSG_CHECKING([how to link with libiconv])
+    AC_MSG_RESULT([$LIBICONV])
+  else
+    dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+    dnl either.
+    CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+  AC_SUBST(LIBICONV)
+  AC_SUBST(LTLIBICONV)
+])
+
+AC_DEFUN([AM_ICONV],
+[
+  AM_ICONV_LINK
+  if test "$am_cv_func_iconv" = yes; then
+    AC_MSG_CHECKING([for iconv declaration])
+    AC_CACHE_VAL(am_cv_proto_iconv, [
+      AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+    am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+    AC_MSG_RESULT([$]{ac_t:-
+         }[$]am_cv_proto_iconv)
+    AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+      [Define as const if the declaration of iconv() needs const.])
+  fi
+])

m4/intdiv0.m4

@@ -0,0 +1,72 @@
+# intdiv0.m4 serial 1 (gettext-0.11.3)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+  AC_REQUIRE([AC_PROG_CC])dnl
+  AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+  AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+    gt_cv_int_divbyzero_sigfpe,
+    [
+      AC_TRY_RUN([
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+#ifdef __cplusplus
+sigfpe_handler (int sig)
+#else
+sigfpe_handler (sig) int sig;
+#endif
+{
+  /* Exit with code 0 if SIGFPE, with code 1 if any other signal.  */
+  exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+  signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP.  */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+  signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL.  */
+#if defined (__sparc__) && defined (__linux__)
+  signal (SIGILL, sigfpe_handler);
+#endif
+
+  z = x / y;
+  nan = y / y;
+  exit (1);
+}
+], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no,
+        [
+          # Guess based on the CPU.
+          case "$host_cpu" in
+            alpha* | i[34567]86 | m68k | s390*)
+              gt_cv_int_divbyzero_sigfpe="guessing yes";;
+            *)
+              gt_cv_int_divbyzero_sigfpe="guessing no";;
+          esac
+        ])
+    ])
+  case "$gt_cv_int_divbyzero_sigfpe" in
+    *yes) value=1;;
+    *) value=0;;
+  esac
+  AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value,
+    [Define if integer division by zero raises signal SIGFPE.])
+])

m4/inttypes-pri.m4

@@ -0,0 +1,32 @@
+# inttypes-pri.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
+# macros to non-string values.  This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+  AC_REQUIRE([gt_HEADER_INTTYPES_H])
+  if test $gt_cv_header_inttypes_h = yes; then
+    AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+      gt_cv_inttypes_pri_broken,
+      [
+        AC_TRY_COMPILE([#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes)
+      ])
+  fi
+  if test "$gt_cv_inttypes_pri_broken" = yes; then
+    AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1,
+      [Define if <inttypes.h> exists and defines unusable PRI* macros.])
+  fi
+])

m4/inttypes.m4

@@ -0,0 +1,27 @@
+# inttypes.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if <inttypes.h> exists and doesn't clash with
+# <sys/types.h>.
+
+AC_DEFUN([gt_HEADER_INTTYPES_H],
+[
+  AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h,
+  [
+    AC_TRY_COMPILE(
+      [#include <sys/types.h>
+#include <inttypes.h>],
+      [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no)
+  ])
+  if test $gt_cv_header_inttypes_h = yes; then
+    AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+      [Define if <inttypes.h> exists and doesn't clash with <sys/types.h>.])
+  fi
+])

m4/inttypes_h.m4

@@ -0,0 +1,28 @@
+# inttypes_h.m4 serial 4 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_INTTYPES_H],
+[
+  AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+  [AC_TRY_COMPILE(
+    [#include <sys/types.h>
+#include <inttypes.h>],
+    [uintmax_t i = (uintmax_t) -1;],
+    jm_ac_cv_header_inttypes_h=yes,
+    jm_ac_cv_header_inttypes_h=no)])
+  if test $jm_ac_cv_header_inttypes_h = yes; then
+    AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+[Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+   and declares uintmax_t. ])
+  fi
+])

m4/isc-posix.m4

@@ -0,0 +1,26 @@
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# This file is not needed with autoconf-2.53 and newer.  Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it.  Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+#   configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+#   configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+  [
+    dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+    AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+  ]
+)

m4/lcmessage.m4

@@ -0,0 +1,32 @@
+# lcmessage.m4 serial 3 (gettext-0.11.3)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+
+AC_DEFUN([AM_LC_MESSAGES],
+[
+  AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+    [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+  if test $am_cv_val_LC_MESSAGES = yes; then
+    AC_DEFINE(HAVE_LC_MESSAGES, 1,
+      [Define if your <locale.h> file defines LC_MESSAGES.])
+  fi
+])

m4/lib-ld.m4

@@ -0,0 +1,97 @@
+# lib-ld.m4 serial 1 (gettext-0.11)
+dnl Copyright (C) 1996-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  acl_cv_prog_gnu_ld=yes
+else
+  acl_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]* | [A-Za-z]:[\\/]*)]
+      [re_direlt='/[^/][^/]*/\.\./']
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])

m4/lib-link.m4

@@ -0,0 +1,554 @@
+# lib-link.m4 serial 3 (gettext-0.11.3)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  define([Name],[translit([$1],[./-], [___])])
+  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+    AC_LIB_LINKFLAGS_BODY([$1], [$2])
+    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+  ])
+  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+  dnl results of this search when this library appears as a dependency.
+  HAVE_LIB[]NAME=yes
+  undefine([Name])
+  undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  define([Name],[translit([$1],[./-], [___])])
+  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed lib[]Name and not disabled its use
+  dnl via --without-lib[]Name-prefix, he wants to use it.
+  ac_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+    ac_save_LIBS="$LIBS"
+    LIBS="$LIBS $LIB[]NAME"
+    AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+    LIBS="$ac_save_LIBS"
+  ])
+  if test "$ac_cv_lib[]Name" = yes; then
+    HAVE_LIB[]NAME=yes
+    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+    AC_MSG_CHECKING([how to link with lib[]$1])
+    AC_MSG_RESULT([$LIB[]NAME])
+  else
+    HAVE_LIB[]NAME=no
+    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+    dnl $INC[]NAME either.
+    CPPFLAGS="$ac_save_CPPFLAGS"
+    LIB[]NAME=
+    LTLIB[]NAME=
+  fi
+  AC_SUBST([HAVE_LIB]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  undefine([Name])
+  undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L,
+dnl sys_lib_search_path_spec, sys_lib_dlsearch_path_spec.
+AC_DEFUN([AC_LIB_RPATH],
+[
+  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
+  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
+  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
+  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+  AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+  ])
+  wl="$acl_cv_wl"
+  libext="$acl_cv_libext"
+  shlibext="$acl_cv_shlibext"
+  hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  hardcode_direct="$acl_cv_hardcode_direct"
+  hardcode_minus_L="$acl_cv_hardcode_minus_L"
+  sys_lib_search_path_spec="$acl_cv_sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec="$acl_cv_sys_lib_dlsearch_path_spec"
+  dnl Determine whether the user wants rpath handling at all.
+  AC_ARG_ENABLE(rpath,
+    [  --disable-rpath         do not hardcode runtime library paths],
+    :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH([lib$1-prefix],
+[  --with-lib$1-prefix[=DIR]  search for lib$1 in DIR/include and DIR/lib
+  --without-lib$1-prefix     don't search for lib$1 in includedir and libdir],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/lib"
+      fi
+    fi
+])
+  dnl Search the library and its dependencies in $additional_libdir and
+  dnl $LDFLAGS. Using breadth-first-seach.
+  LIB[]NAME=
+  LTLIB[]NAME=
+  INC[]NAME=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='$1 $2'
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+        dnl or AC_LIB_HAVE_LINKFLAGS call.
+        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+          else
+            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+            dnl that this library doesn't exist. So just drop it.
+            :
+          fi
+        else
+          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+          dnl and the already constructed $LIBNAME/$LTLIBNAME.
+          found_dir=
+          found_la=
+          found_so=
+          found_a=
+          if test $use_additional = yes; then
+            if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+              found_dir="$additional_libdir"
+              found_so="$additional_libdir/lib$name.$shlibext"
+              if test -f "$additional_libdir/lib$name.la"; then
+                found_la="$additional_libdir/lib$name.la"
+              fi
+            else
+              if test -f "$additional_libdir/lib$name.$libext"; then
+                found_dir="$additional_libdir"
+                found_a="$additional_libdir/lib$name.$libext"
+                if test -f "$additional_libdir/lib$name.la"; then
+                  found_la="$additional_libdir/lib$name.la"
+                fi
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIB[]NAME; do
+              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                  if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+                    found_dir="$dir"
+                    found_so="$dir/lib$name.$shlibext"
+                    if test -f "$dir/lib$name.la"; then
+                      found_la="$dir/lib$name.la"
+                    fi
+                  else
+                    if test -f "$dir/lib$name.$libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/lib$name.$libext"
+                      if test -f "$dir/lib$name.la"; then
+                        found_la="$dir/lib$name.la"
+                      fi
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+            dnl Found the library.
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+              dnl Linking with a shared library. We attempt to hardcode its
+              dnl directory into the executable's runpath, unless it's the
+              dnl standard /usr/lib.
+              if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+                dnl No hardcoding is needed.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+              else
+                dnl Use an explicit option to hardcode DIR into the resulting
+                dnl binary.
+                dnl Potentially add DIR to ltrpathdirs.
+                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                dnl The hardcoding into $LIBNAME is system dependent.
+                if test "$hardcode_direct" = yes; then
+                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+                  dnl resulting binary.
+                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                else
+                  if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+                    dnl Use an explicit option to hardcode DIR into the resulting
+                    dnl binary.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    dnl Potentially add DIR to rpathdirs.
+                    dnl The rpathdirs will be appended to $LIBNAME at the end.
+                    haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                    dnl Rely on "-L$found_dir".
+                    dnl But don't add it if it's already contained in the LDFLAGS
+                    dnl or the already constructed $LIBNAME
+                    haveit=
+                    for x in $LDFLAGS $LIB[]NAME; do
+                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+                    fi
+                    if test "$hardcode_minus_L" != no; then
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    else
+                      dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+                      dnl here, because this doesn't fit in flags passed to the
+                      dnl compiler. So give up. No hardcoding. This affects only
+                      dnl very old systems.
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                dnl Linking with a static library.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+              else
+                dnl We shouldn't come here, but anyway it's good to have a
+                dnl fallback.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+              fi
+            fi
+            dnl Assume the include files are nearby.
+            additional_includedir=
+            case "$found_dir" in
+              */lib | */lib/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+              dnl Potentially add $additional_includedir to $INCNAME.
+              dnl But don't add it
+              dnl   1. if it's the standard /usr/include,
+              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
+              dnl   3. if it's already present in $CPPFLAGS or the already
+              dnl      constructed $INCNAME,
+              dnl   4. if it doesn't exist as a directory.
+              if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux*) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INC[]NAME; do
+                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                      dnl Really add $additional_includedir to $INCNAME.
+                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+            dnl Look for dependencies.
+            if test -n "$found_la"; then
+              dnl Read the .la file. It defines the variables
+              dnl dlname, library_names, old_library, dependency_libs, current,
+              dnl age, revision, installed, dlopen, dlpreopen, libdir.
+              save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+              dnl We use only dependency_libs.
+              for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+                    dnl But don't add it
+                    dnl   1. if it's the standard /usr/lib,
+                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
+                    dnl   3. if it's already present in $LDFLAGS or the already
+                    dnl      constructed $LIBNAME,
+                    dnl   4. if it doesn't exist as a directory.
+                    if test "X$additional_libdir" != "X/usr/lib"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/lib"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux*) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LIBNAME.
+                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LTLIBNAME.
+                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                      dnl Potentially add DIR to rpathdirs.
+                      dnl The rpathdirs will be appended to $LIBNAME at the end.
+                      haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                      dnl Potentially add DIR to ltrpathdirs.
+                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                      haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                    dnl Handle this in the next round.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                    dnl Handle this in the next round. Throw away the .la's
+                    dnl directory; it is already contained in a preceding -L
+                    dnl option.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                    dnl Most likely an immediate library name.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+            dnl Didn't find the library; assume it is in the system directories
+            dnl known to the linker and runtime loader. (All the system
+            dnl directories known to the linker should also be known to the
+            dnl runtime loader, otherwise the system is severely misconfigured.)
+            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$hardcode_libdir_separator"; then
+      dnl Weird platform: only the last -rpath option counts, the user must
+      dnl pass all path elements in one option. We can arrange that for a
+      dnl single library, but not when more than one $LIBNAMEs are used.
+      alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+      done
+      dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+      acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+    else
+      dnl The -rpath options are cumulative.
+      for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+    dnl When using libtool, the option that works for both libraries and
+    dnl executables is -R. The -R options are cumulative.
+    for found_dir in $ltrpathdirs; do
+      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+    done
+  fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+  for element in [$2]; do
+    haveit=
+    for x in $[$1]; do
+      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      [$1]="${[$1]}${[$1]:+ }$element"
+    fi
+  done
+])

m4/lib-prefix.m4

@@ -0,0 +1,148 @@
+# lib-prefix.m4 serial 1 (gettext-0.11)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+  AC_REQUIRE([AC_PROG_CC])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH([lib-prefix],
+[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+  --without-lib-prefix    don't search for libraries in includedir and libdir],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/lib"
+      fi
+    fi
+])
+  if test $use_additional = yes; then
+    dnl Potentially add $additional_includedir to $CPPFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/include,
+    dnl   2. if it's already present in $CPPFLAGS,
+    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_includedir" != "X/usr/include"; then
+      haveit=
+      for x in $CPPFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-I$additional_includedir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_includedir" = "X/usr/local/include"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux*) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_includedir"; then
+            dnl Really add $additional_includedir to $CPPFLAGS.
+            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+          fi
+        fi
+      fi
+    fi
+    dnl Potentially add $additional_libdir to $LDFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/lib,
+    dnl   2. if it's already present in $LDFLAGS,
+    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_libdir" != "X/usr/lib"; then
+      haveit=
+      for x in $LDFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-L$additional_libdir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_libdir" = "X/usr/local/lib"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux*) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_libdir"; then
+            dnl Really add $additional_libdir to $LDFLAGS.
+            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+          fi
+        fi
+      fi
+    fi
+  fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+  dnl Unfortunately, prefix and exec_prefix get only finally determined
+  dnl at the end of configure.
+  if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  $1
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+])

m4/progtest.m4

@@ -0,0 +1,59 @@
+# progtest.m4 serial 2 (gettext-0.10.40)
+dnl Copyright (C) 1996-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+  /*)
+  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in ifelse([$5], , $PATH, [$5]); do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if [$3]; then
+	ac_cv_path_$1="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+  ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+  AC_MSG_RESULT([$]$1)
+else
+  AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])

m4/stdint_h.m4

@@ -0,0 +1,28 @@
+# stdint_h.m4 serial 2 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_STDINT_H],
+[
+  AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h,
+  [AC_TRY_COMPILE(
+    [#include <sys/types.h>
+#include <stdint.h>],
+    [uintmax_t i = (uintmax_t) -1;],
+    jm_ac_cv_header_stdint_h=yes,
+    jm_ac_cv_header_stdint_h=no)])
+  if test $jm_ac_cv_header_stdint_h = yes; then
+    AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+[Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+   and declares uintmax_t. ])
+  fi
+])

m4/uintmax_t.m4

@@ -0,0 +1,29 @@
+# uintmax_t.m4 serial 6 (gettext-0.11)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define uintmax_t to `unsigned long' or `unsigned long long'
+# if <inttypes.h> does not exist.
+
+AC_DEFUN([jm_AC_TYPE_UINTMAX_T],
+[
+  AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+  AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+  if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
+    AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
+    test $ac_cv_type_unsigned_long_long = yes \
+      && ac_type='unsigned long long' \
+      || ac_type='unsigned long'
+    AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
+  [Define to unsigned long or unsigned long long
+   if <inttypes.h> and <stdint.h> don't define.])
+  fi
+])

m4/ulonglong.m4

@@ -0,0 +1,23 @@
+# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40)
+dnl Copyright (C) 1999-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License.  As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG],
+[
+  AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+  [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
+    [unsigned long long ullmax = (unsigned long long) -1;
+     return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+    ac_cv_type_unsigned_long_long=yes,
+    ac_cv_type_unsigned_long_long=no)])
+  if test $ac_cv_type_unsigned_long_long = yes; then
+    AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
+      [Define if you have the unsigned long long type.])
+  fi
+])

missing

@@ -1,190 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing - GNU libit 0.0"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`configure.in'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`configure.in'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`configure.in'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0

mkinstalldirs

@@ -1,40 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-# $Id$
-
-errstatus=0
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here

move.c

@@ -2,10 +2,10 @@
 /**************************************************************************
  *   move.c                                                               *
  *                                                                        *
- *   Copyright (C) 1999 Chris Allegretta                                  *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
  *   This program is free software; you can redistribute it and/or modify *
  *   it under the terms of the GNU General Public License as published by *
- *   the Free Software Foundation; either version 1, or (at your option)  *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
  *   any later version.                                                   *
  *                                                                        *
  *   This program is distributed in the hope that it will be useful,      *
@@ -19,34 +19,82 @@
  *                                                                        *
  **************************************************************************/
 
+#include "config.h"
+
 #include <stdlib.h>
 #include <string.h>
 #include <stdio.h>
-#include "config.h"
+#include <assert.h>
 #include "proto.h"
 #include "nano.h"
 
-#ifndef NANO_SMALL
-#include <libintl.h>
-#define _(string) gettext(string)
-#else
-#define _(string) (string)
-#endif
-
-void page_down_center(void)
+int do_home(void)
 {
-    if (editbot != filebot) {
-	edit_update(editbot->next, CENTER);
-	center_cursor();
-    } else {
-	while (current != filebot)
-	    current = current->next;
-	edit_update(current, CENTER);
-    }
+    UNSET(KEEP_CUTBUFFER);
+    current_x = 0;
+    placewewant = 0;
+    update_line(current, current_x);
+    return 1;
+}
+
+int do_end(void)
+{
+    UNSET(KEEP_CUTBUFFER);
+    current_x = strlen(current->data);
+    placewewant = xplustabs();
+    update_line(current, current_x);
+    return 1;
+}
+
+void page_up(void)
+{
+    if (edittop != fileage) {
+#ifndef NANO_SMALL
+	if (ISSET(SMOOTHSCROLL))
+	    edit_update(edittop->prev, TOP);
+	else
+#endif
+	{
+	    edit_update(edittop, CENTER);
+	    /* Now that we've updated the edit window, edittop might be
+	       at the top of the file; if so, just move the cursor up one
+	       line and don't center it. */
+	    if (edittop != fileage)
+		center_cursor();
+	    else
+		reset_cursor();
+	}
+    } else
+	current_y = 0;
+
     update_cursor();
 }
 
-int page_down(void)
+int do_page_up(void)
+{
+    int i;
+
+    wrap_reset();
+    current_x = 0;
+    placewewant = 0;
+
+    if (current == fileage)
+	return 0;
+
+    current_y = 0;
+    current = edittop;
+    for (i = 0; i <= editwinrows - 3 && current->prev != NULL; i++)
+	current = current->prev;
+
+    edit_update(current, TOP);
+    update_cursor();
+
+    UNSET(KEEP_CUTBUFFER);
+    check_statblank();
+    return 1;
+}
+
+int do_page_down(void)
 {
     wrap_reset();
     current_x = 0;
@@ -55,8 +103,8 @@ int page_down(void)
     if (current == filebot)
 	return 0;
 
-    /* AHEM, if we only have a screen or less of text, DONT do an
-	edit_update, just move the cursor to editbot! */
+    /* AHEM, if we only have a screen or less of text, DON'T do an
+       edit_update, just move the cursor to editbot! */
     if (edittop == fileage && editbot == filebot && totlines < editwinrows) {
 	current = editbot;
 	reset_cursor();
@@ -83,129 +131,62 @@ int page_down(void)
     return 1;
 }
 
-int do_home(void)
-{
-    current_x = 0;
-    placewewant = 0;
-    update_line(current, current_x);
-    return 1;
-}
-
-int do_end(void)
-{
-    current_x = strlen(current->data);
-    placewewant = xplustabs();
-    update_line(current, current_x);
-
-    return 1;
-}
-
-/* What happens when we want to go past the bottom of the buffer */
-int do_down(void)
-{
-    wrap_reset();
-    if (current->next != NULL) {
-	update_line(current->prev, 0);
-
-	if (placewewant > 0)
-	    current_x = actual_x(current->next, placewewant);
-
-	if (current_x > strlen(current->next->data))
-	    current_x = strlen(current->next->data);
-    } else {
-	UNSET(KEEP_CUTBUFFER);
-	check_statblank();
-	return 0;
-    }
-
-    if (current_y < editwinrows - 1 && current != editbot)
-	current_y++;
-    else
-	page_down_center();
-
-    update_cursor();
-    update_line(current->prev, 0);
-    update_line(current, current_x);
-    UNSET(KEEP_CUTBUFFER);
-    check_statblank();
-    return 1;
-}
-
-void page_up_center(void)
-{
-    if (edittop != fileage) {
-	edit_update(edittop, CENTER);
-	center_cursor();
-    } else
-	current_y = 0;
-
-    update_cursor();
-
-}
-
-int page_up(void)
-{
-    filestruct *fileptr = edittop;
-    wrap_reset();
-    current_x = 0;
-    placewewant = 0;
-
-    if (current == fileage)
-	return 0;
-
-    current_y = 0;
-    if (fileptr->next != NULL)
-	fileptr = fileptr->next;
-    if (fileptr->next != NULL)
-	fileptr = fileptr->next;
-
-    current = edittop;
-    edit_update(fileptr, BOTTOM);
-    update_cursor();
-
-    UNSET(KEEP_CUTBUFFER);
-    check_statblank();
-    return 1;
-}
-
-
 int do_up(void)
 {
     wrap_reset();
     if (current->prev != NULL) {
-	if (placewewant > 0)
-	    current_x = actual_x(current->prev, placewewant);
-
-	if (current_x > strlen(current->prev->data))
-	    current_x = strlen(current->prev->data);
+	current_x = actual_x(current->prev, placewewant);
+	current = current->prev;
+	if (current_y > 0) {
+	    update_line(current->next, 0);
+		/* It is necessary to change current first, so the mark
+		   display will change! */
+	    current_y--;
+	    update_line(current, current_x);
+	} else
+	    page_up();
+	UNSET(KEEP_CUTBUFFER);
+	check_statblank();
     }
-    if (current_y > 0)
-	current_y--;
-    else
-	page_up_center();
-
-    update_cursor();
-    update_line(current->next, 0);
-    update_line(current, current_x);
-    UNSET(KEEP_CUTBUFFER);
-    check_statblank();
     return 1;
 }
 
-int do_right(void)
-{
-    if (current_x < strlen(current->data)) {
-	current_x++;
-    } else {
-	if (do_down())
-	    current_x = 0;
-    }
-
-    placewewant = xplustabs();
-    update_cursor();
-    update_line(current, current_x);
+/* Return value 1 means we moved down, 0 means we were already at the
+ * bottom. */
+int do_down(void) {
+    wrap_reset();
     UNSET(KEEP_CUTBUFFER);
     check_statblank();
+
+    if (current->next == NULL)
+	return 0;
+
+    current = current->next;
+    current_x = actual_x(current, placewewant);
+
+    /* Note current_y is zero-based.  This test checks for the cursor
+     * being on the last row of the edit window. */
+    if (current_y == editwinrows - 1) {
+#ifndef NANO_SMALL
+	if (ISSET(SMOOTHSCROLL)) {
+	    /* In this case current_y does not change.  The cursor
+	     * remains at the bottom of the edit window. */
+	    edittop = edittop->next;
+	    editbot = editbot->next;
+	    edit_refresh();
+	} else
+#endif
+	{
+	    /* Set edittop so editbot->next (or else editbot) is
+	     * centered, and set current_y = editwinrows / 2. */
+	    edit_update(editbot->next != NULL ? editbot->next : editbot, CENTER);
+	    center_cursor();
+	}
+    } else {
+	update_line(current->prev, 0);
+	update_line(current, current_x);
+	current_y++;
+    }
     return 1;
 }
 
@@ -214,13 +195,27 @@ int do_left(void)
     if (current_x > 0)
 	current_x--;
     else if (current != fileage) {
-	placewewant = 0;
-	current_x = strlen(current->prev->data);
 	do_up();
+	current_x = strlen(current->data);
+    }
+    placewewant = xplustabs();
+    update_line(current, current_x);
+    UNSET(KEEP_CUTBUFFER);
+    check_statblank();
+    return 1;
+}
+
+int do_right(void)
+{
+    assert(current_x <= strlen(current->data));
+
+    if (current->data[current_x] != '\0')
+	current_x++;
+    else if (current->next) {
+	do_down();
+	current_x = 0;
     }
     placewewant = xplustabs();
-
-    update_cursor();
     update_line(current, current_x);
     UNSET(KEEP_CUTBUFFER);
     check_statblank();

nano.1

@@ -1,78 +1,123 @@
 .\" Hey, EMACS: -*- nroff -*-
-.\" nano.1 is copyright 1999-2000 by
+.\" nano.1 is copyright 1999-2002 by
 .\" Chris Allegretta <chrisa@asty.org>
 .\"
 .\" This is free documentation, see the latest version of the GNU General
 .\" Public License for copying conditions. There is NO warranty.
 .\"
-.\" First parameter, NAME, should be all caps
-.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-.\" other parameters are allowed: see man(7), man(1)
-.TH NANO 1 "December 2, 2000"
+.\" $Id$
+.TH NANO 1 "July 30, 2002"
 .\" Please adjust this date whenever revising the manpage.
 .\"
 .SH NAME
 nano \- Nano's ANOther editor, an enhanced free Pico Clone
 .SH SYNOPSIS
 .B nano
-.RI [options]\ [+LINE] " file"
+.I [\+LINE]\ [options]\ [file]
 .br
 .SH DESCRIPTION
-This manual page documents briefly the
-.B nano
-command.
+This manual page documents briefly the \fBnano\fP command.
 .PP
 .\" TeX users may be more comfortable with the \fB<whatever>\fP and
-.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" \fI<whatever>\fP escape sequences to invoke bold face and italics, 
 .\" respectively.
 \fBnano\fP is a small, free and friendly editor which aims to replace
 Pico, the default editor included in the non-free Pine package. Rather
-than just copying Pico's look and feel,
-.B nano
-also implements some missing (or disabled by default) features in Pico,
-such as "search and replace" and "goto line number".
+than just copying Pico's look and feel, \fBnano\fP also implements some
+missing (or disabled by default) features in Pico, such as "search and
+replace" and "go to line number".
 .SH OPTIONS
 .TP
-.B \-T (\-\-tabsize)
-Set the size (width) of a tab.
+.B \+\fILINE\fP
+Places cursor at \fILINE\fP on startup.
+.TP
+.B \-B (\-\-backup)
+When saving a file, back up the previous version of it to the current
+filename suffixed with a ~.
+.TP
+.B \-D (\-\-dos)
+Write file in DOS format.
+.TP
+.B \-F (\-\-multibuffer)
+Enable multiple file buffers, if available.
+.TP
+.B \-I (\-\-ignorercfiles)
+Don't look at /etc/nanorc or ~/.nanorc, if nanorc support is available.
+.TP
+.B \-K (\-\-keypad)
+Do not use the ncurses keypad() call unless necessary.  Try this flag if 
+you find that the arrow keys on the numeric keypad do not work for you 
+under nano.
+.TP
+.B \-M (\-\-mac)
+Write file in Mac format.
+.TP
+.B \-N (\-\-noconvert)
+Disable automatic conversion of files from DOS/Mac format.
+.TP
+.B \-Q \fI[str]\fP (\-\-quotestr=\fI[str]\fP)
+Set the quoting string for justifying.  The default is
+"^([ \\t]*[|>:}#])+" if regular expression support is available, or
+"> " otherwise.
 .TP
 .B \-R (\-\-regexp)
 Enable regular expression matching for search strings, as well as
 \\n subexpression replacement for replace strings, if available.
 .TP
+.B \-S (\-\-smooth)
+Enable smooth scrolling. Text will scroll line-by-line, instead of the
+usual chunk-by-chunk behavior.
+.TP
+.B \-T \fI[num]\fP (\-\-tabsize=\fI[num]\fP)
+Set the size (width) of a tab.
+.TP
 .B \-V (\-\-version)
 Show the current version number and author.
 .TP
-.B \-h (\-\-help)
-Display a summary of commandline options.
+.B \-Y \fI[str]\fP (\-\-syntax=\fI[str]\fP)
+Specify a specific syntax highlighting from the .nanorc to use, if
+available.
 .TP
 .B \-c (\-\-const)
 Constantly show the cursor position.
 .TP
-.B \-k (\-\-cut)
-Enable cut from cursor to end of line with ^K.
+.B \-h (\-\-help)
+Display a summary of command line options.
 .TP
 .B \-i (\-\-autoindent)
 Indent new lines to the previous line's indentation. Useful when editing
 source code.
 .TP
+.B \-k (\-\-cut)
+Enable cut from cursor to end of line with ^K.
+.TP
 .B \-l (\-\-nofollow)
-If the file being edited is a symbolic link, replace the link with a 
-a new file, do not follow it.  Good for editing files in /tmp perhaps?
+If the file being edited is a symbolic link, replace the link with
+a new file, do not follow it.  Good for editing files in /tmp, perhaps?
 .TP
 .B \-m (\-\-mouse)
 Enable mouse support (if available for your system).
 .TP
-.B \-p (\-\-pico)
-Emulate Pico as closely as possible.  This affects both the "shortcut list"
-at the bottom of the screen, as well as the display and entry of previous
-search and replace strings.
+.B \-o \fI[dir]\fP (\-\-operatingdir=\fI[dir]\fP)
+Set operating directory. Makes nano set up something similar to a
+chroot.
 .TP
-.B \-s (\-\-speller)
+.B \-p (\-\-pico)
+Emulate Pico as closely as possible.  This affects both the "shortcut
+list" at the bottom of the screen, as well as the display and entry of
+previous search and replace strings.
+.TP
+.B \-r \fI[#cols]\fP (\-\-fill=\fI[#cols]\fP)
+Wrap lines at column #cols.  By default, this is the width of the
+screen, less eight.  If this value is negative, wrapping will occur at
+#cols from the right of the screen, allowing it to vary along with the
+screen width if the screen is resized.
+.TP
+.B \-s \fI[prog]\fP (\-\-speller=\fI[prog]\fP)
 Enable alternative spell checker command.
 .TP
 .B \-t (\-\-tempfile)
-Always save changed buffer without prompting. Same as Pico -t option.
+Always save changed buffer without prompting.  Same as Pico -t option.
 .TP
 .B \-v (\-\-view)
 View file (read only) mode.
@@ -86,32 +131,33 @@ Disable help screen at bottom of editor.
 .B \-z (\-\-suspend)
 Enable suspend ability.
 .TP
-.B \-b, \-e, \-f
+.B \-a, \-b, \-e, \-f, \-g, \-j
 Ignored, for compatibility with Pico.
-.TP
-.B \+LINE
-Places cursor at LINE on startup.
 .SH NOTES
-Nano will try to dump the buffer into an emergency file in some cases.
-Mainly, this will happen if Nano recieves a SIGHUP or runs out of
-memory, when it will write the buffer into a file named "nano.save" if the
-buffer didn't have a name already, or will add a ".save" suffix to the
-current finename. Nano will \fBnot\fP write this file if a previous one
-exists in the current directory.
+\fBnano\fP will try to dump the buffer into an emergency file in some
+cases.  Mainly, this will happen if \fBnano\fP receives a SIGHUP or
+SIGTERM or runs out of memory, when it will write the buffer into a file
+named "nano.save" if the buffer didn't have a name already, or will add
+a ".save" suffix to the current filename. If an emergency file with that
+name already exists in the current directory, ".save" and a number (e.g.
+".save.1") will be suffixed to the current filename in order to make it
+unique. In multibuffer mode, \fBnano\fP will write all the open buffers
+to the respective emergency files.
 .SH BUGS
 Please send any comments or bug reports to
 .br
 .B nano@nano-editor.org.
 .br
-The nano mailing list is available from
+The \fBnano\fP mailing list is available from
 .br
-.B nano-devel@lists.sourceforge.net.
-To subscribe, email to nano-devel-request@lists.sourceforge.net with a
+.B nano-devel@gnu.org.
+To subscribe, email to nano-devel-request@gnu.org with a
 subject of "subscribe".
 .SH HOMEPAGE
 http://www.nano-editor.org
 .SH AUTHOR
-Chris Allegretta <chrisa@asty.org>, et al (see AUTHORS for details).
+Chris Allegretta <chrisa@asty.org>, et al (see AUTHORS and THANKS for
+details).
 This manual page was originally written by Jordi Mallach
-<jordi@sindominio.net>, for the Debian GNU/Linux system (but may be
+<jordi@sindominio.net>, for the Debian GNU system (but may be
 used by others).

nano.1.html

@@ -3,7 +3,7 @@ Content-type: text/html
 <HTML><HEAD><TITLE>Manpage of NANO</TITLE>
 </HEAD><BODY>
 <H1>NANO</H1>
-Section: User Commands  (1)<BR>Updated: December 2, 2000<BR><A HREF="#index">Index</A>
+Section: User Commands  (1)<BR>Updated: October 13, 2002<BR><A HREF="#index">Index</A>
 <A HREF="http://localhost/cgi-bin/man/man2html">Return to Main Contents</A><HR>
 
 
@@ -17,17 +17,14 @@ nano - Nano's ANOther editor, an enhanced free Pico Clone
 
 <B>nano</B>
 
-[options]&nbsp;[+LINE]<I> file</I>
+<I>[+LINE]&nbsp;[options]&nbsp;[file]</I>
 
 <BR>
 
 <A NAME="lbAD">&nbsp;</A>
 <H2>DESCRIPTION</H2>
 
-This manual page documents briefly the
-<B>nano</B>
-
-command.
+This manual page documents briefly the <B>nano</B> command.
 <P>
 
 
@@ -35,68 +32,129 @@ command.
 
 <B>nano</B> is a small, free and friendly editor which aims to replace
 Pico, the default editor included in the non-free Pine package. Rather
-than just copying Pico's look and feel,
-<B>nano</B>
-
-also implements some missing (or disabled by default) features in Pico,
-such as &quot;search and replace&quot; and &quot;goto line number&quot;.
+than just copying Pico's look and feel, <B>nano</B> also implements some
+missing (or disabled by default) features in Pico, such as &quot;search and
+replace&quot; and &quot;go to line number&quot;.
 <A NAME="lbAE">&nbsp;</A>
 <H2>OPTIONS</H2>
 
 <DL COMPACT>
-<DT><B>-T (--tabsize)</B>
+<DT><B>+</B><I>LINE</I>
 
 <DD>
-Set the size (width) of a tab.
+Places cursor at <I>LINE</I> on startup.
+<DT><B>-B (--backup)</B>
+
+<DD>
+When saving a file, back up the previous version of it to the current
+filename suffixed with a ~.
+<DT><B>-D (--dos)</B>
+
+<DD>
+Write file in DOS format.
+<DT><B>-F (--multibuffer)</B>
+
+<DD>
+Enable multiple file buffers, if available.
+<DT><B>-I (--ignorercfiles)</B>
+
+<DD>
+Don't look at /etc/nanorc or ~/.nanorc, if nanorc support is available.
+<DT><B>-K (--keypad)</B>
+
+<DD>
+Do not use the ncurses keypad() call unless necessary.  Try this flag if 
+you find that the arrow keys on the numeric keypad do not work for you 
+under nano.
+<DT><B>-M (--mac)</B>
+
+<DD>
+Write file in Mac format.
+<DT><B>-N (--noconvert)</B>
+
+<DD>
+Disable automatic conversion of files from DOS/Mac format.
+<DT><B>-Q </B><I>[str]</I> (--quotestr=<I>[str]</I>)
+
+<DD>
+Set the quoting string for justifying.  The default is
+&quot;^([ \t]*[|&gt;:}#])+&quot; if regular expression support is available, or
+&quot;&gt; &quot; otherwise.
 <DT><B>-R (--regexp)</B>
 
 <DD>
 Enable regular expression matching for search strings, as well as
 \n subexpression replacement for replace strings, if available.
+<DT><B>-S (--smooth)</B>
+
+<DD>
+Enable smooth scrolling. Text will scroll line-by-line, instead of the
+usual chunk-by-chunk behavior.
+<DT><B>-T </B><I>[num]</I> (--tabsize=<I>[num]</I>)
+
+<DD>
+Set the size (width) of a tab.
 <DT><B>-V (--version)</B>
 
 <DD>
 Show the current version number and author.
-<DT><B>-h (--help)</B>
+<DT><B>-Y </B><I>[str]</I> (--syntax=<I>[str]</I>)
 
 <DD>
-Display a summary of commandline options.
+Specify a specific syntax highlighting from the .nanorc to use, if
+available.
 <DT><B>-c (--const)</B>
 
 <DD>
 Constantly show the cursor position.
-<DT><B>-k (--cut)</B>
+<DT><B>-h (--help)</B>
 
 <DD>
-Enable cut from cursor to end of line with ^K.
+Display a summary of command line options.
 <DT><B>-i (--autoindent)</B>
 
 <DD>
 Indent new lines to the previous line's indentation. Useful when editing
 source code.
+<DT><B>-k (--cut)</B>
+
+<DD>
+Enable cut from cursor to end of line with ^K.
 <DT><B>-l (--nofollow)</B>
 
 <DD>
-If the file being edited is a symbolic link, replace the link with a 
-a new file, do not follow it.  Good for editing files in /tmp perhaps?
+If the file being edited is a symbolic link, replace the link with
+a new file, do not follow it.  Good for editing files in /tmp, perhaps?
 <DT><B>-m (--mouse)</B>
 
 <DD>
 Enable mouse support (if available for your system).
+<DT><B>-o </B><I>[dir]</I> (--operatingdir=<I>[dir]</I>)
+
+<DD>
+Set operating directory. Makes nano set up something similar to a
+chroot.
 <DT><B>-p (--pico)</B>
 
 <DD>
-Emulate Pico as closely as possible.  This affects both the &quot;shortcut list&quot;
-at the bottom of the screen, as well as the display and entry of previous
-search and replace strings.
-<DT><B>-s (--speller)</B>
+Emulate Pico as closely as possible.  This affects both the &quot;shortcut
+list&quot; at the bottom of the screen, as well as the display and entry of
+previous search and replace strings.
+<DT><B>-r </B><I>[#cols]</I> (--fill=<I>[#cols]</I>)
+
+<DD>
+Wrap lines at column #cols.  By default, this is the width of the
+screen, less eight.  If this value is negative, wrapping will occur at
+#cols from the right of the screen, allowing it to vary along with the
+screen width if the screen is resized.
+<DT><B>-s </B><I>[prog]</I> (--speller=<I>[prog]</I>)
 
 <DD>
 Enable alternative spell checker command.
 <DT><B>-t (--tempfile)</B>
 
 <DD>
-Always save changed buffer without prompting. Same as Pico -t option.
+Always save changed buffer without prompting.  Same as Pico -t option.
 <DT><B>-v (--view)</B>
 
 <DD>
@@ -113,24 +171,23 @@ Disable help screen at bottom of editor.
 
 <DD>
 Enable suspend ability.
-<DT><B>-b, -e, -f</B>
+<DT><B>-a, -b, -e, -f, -g, -j</B>
 
 <DD>
 Ignored, for compatibility with Pico.
-<DT><B>+LINE</B>
-
-<DD>
-Places cursor at LINE on startup.
 </DL>
 <A NAME="lbAF">&nbsp;</A>
 <H2>NOTES</H2>
 
-Nano will try to dump the buffer into an emergency file in some cases.
-Mainly, this will happen if Nano recieves a SIGHUP or runs out of
-memory, when it will write the buffer into a file named &quot;nano.save&quot; if the
-buffer didn't have a name already, or will add a &quot;.save&quot; suffix to the
-current finename. Nano will <B>not</B> write this file if a previous one
-exists in the current directory.
+<B>nano</B> will try to dump the buffer into an emergency file in some
+cases.  Mainly, this will happen if <B>nano</B> receives a SIGHUP or
+SIGTERM or runs out of memory, when it will write the buffer into a file
+named &quot;nano.save&quot; if the buffer didn't have a name already, or will add
+a &quot;.save&quot; suffix to the current filename. If an emergency file with that
+name already exists in the current directory, &quot;.save&quot; and a number (e.g.
+&quot;.save.1&quot;) will be suffixed to the current filename in order to make it
+unique. In multibuffer mode, <B>nano</B> will write all the open buffers
+to the respective emergency files.
 <A NAME="lbAG">&nbsp;</A>
 <H2>BUGS</H2>
 
@@ -141,12 +198,12 @@ Please send any comments or bug reports to
 
 <BR>
 
-The nano mailing list is available from
+The <B>nano</B> mailing list is available from
 <BR>
 
-<B><A HREF="mailto:nano-devel@lists.sourceforge.net">nano-devel@lists.sourceforge.net</A>.</B>
+<B><A HREF="mailto:nano-devel@gnu.org">nano-devel@gnu.org</A>.</B>
 
-To subscribe, email to <A HREF="mailto:nano-devel-request@lists.sourceforge.net">nano-devel-request@lists.sourceforge.net</A> with a
+To subscribe, email to <A HREF="mailto:nano-devel-request@gnu.org">nano-devel-request@gnu.org</A> with a
 subject of &quot;subscribe&quot;.
 <A NAME="lbAH">&nbsp;</A>
 <H2>HOMEPAGE</H2>
@@ -155,9 +212,10 @@ subject of &quot;subscribe&quot;.
 <A NAME="lbAI">&nbsp;</A>
 <H2>AUTHOR</H2>
 
-Chris Allegretta &lt;<A HREF="mailto:chrisa@asty.org">chrisa@asty.org</A>&gt;, et al (see AUTHORS for details).
+Chris Allegretta &lt;<A HREF="mailto:chrisa@asty.org">chrisa@asty.org</A>&gt;, et al (see AUTHORS and THANKS for
+details).
 This manual page was originally written by Jordi Mallach
-&lt;<A HREF="mailto:jordi@sindominio.net">jordi@sindominio.net</A>&gt;, for the Debian GNU/Linux system (but may be
+&lt;<A HREF="mailto:jordi@sindominio.net">jordi@sindominio.net</A>&gt;, for the Debian GNU system (but may be
 used by others).
 <P>
 
@@ -177,6 +235,6 @@ used by others).
 This document was created by
 <A HREF="http://localhost/cgi-bin/man/man2html">man2html</A>,
 using the manual pages.<BR>
-Time: 02:16:52 GMT, December 18, 2000
+Time: 16:04:40 GMT, October 13, 2002
 </BODY>
 </HTML>

nano.h

@@ -2,10 +2,10 @@
 /**************************************************************************
  *   nano.h                                                               *
  *                                                                        *
- *   Copyright (C) 1999 Chris Allegretta                                  *
+ *   Copyright (C) 1999-2002 Chris Allegretta                             *
  *   This program is free software; you can redistribute it and/or modify *
  *   it under the terms of the GNU General Public License as published by *
- *   the Free Software Foundation; either version 1, or (at your option)  *
+ *   the Free Software Foundation; either version 2, or (at your option)  *
  *   any later version.                                                   *
  *                                                                        *
  *   This program is distributed in the hope that it will be useful,      *
@@ -19,10 +19,6 @@
  *                                                                        *
  **************************************************************************/
 
-#ifdef HAVE_MALLOC_H
-#include <malloc.h>
-#endif
-
 #ifdef HAVE_LIMITS_H
 #include <limits.h>
 #endif
@@ -34,7 +30,12 @@
 #define SET(bit) flags |= bit
 #define UNSET(bit) flags &= ~bit
 #define ISSET(bit) (flags & bit)
+#define TOGGLE(bit) flags ^= bit
 
+#ifndef NANO_SMALL
+  /* For the backup file copy ... */
+# define COPYFILEBLOCKSIZE 1024
+#endif
 
 #ifdef USE_SLANG	/* Slang support enabled */
 #include <slcurses.h>
@@ -45,10 +46,21 @@
 #include <curses.h> 
 #endif /* CURSES_H */
 
-#ifdef HAVE_LIBINTL_H
-#include <libintl.h>
+#ifdef ENABLE_NLS
+#  ifdef HAVE_LIBINTL_H
+#    include <libintl.h>
+#  endif
+#  define _(string) gettext(string)
+#  ifdef NO_NGETTEXT
+#    define ngettext(singular, plural, number) gettext(number == 1 ? singular : plural)
+#  endif
+#else
+#  define _(string) (string)
+#  define ngettext(singular, plural, number) number == 1 ? singular : plural
 #endif
 
+#include <sys/types.h>
+#include <sys/stat.h>
 #include "config.h"
 
 #if !defined(HAVE_SNPRINTF) || !defined(HAVE_VSNPRINTF)
@@ -61,16 +73,58 @@
 # endif
 #endif
 
+/* HP-UX 10 & 11 do not seem to support KEY_HOME and KEY_END */
+#ifndef KEY_HOME
+#define KEY_HOME -1
+#endif /* KEY_HOME */
+
+#ifndef KEY_END
+#define KEY_END -1
+#endif /* KEY_END */
+
+
 #define VERMSG "GNU nano " VERSION
 
+#if defined(DISABLE_WRAPPING) && defined(DISABLE_JUSTIFY)
+#define DISABLE_WRAPJUSTIFY 1
+#endif
+
 /* Structure types */
 typedef struct filestruct {
     char *data;
     struct filestruct *next;	/* Next node */
     struct filestruct *prev;	/* Previous node */
-    long lineno;		/* The line number */
+    int lineno;			/* The line number */
 } filestruct;
 
+#ifdef ENABLE_MULTIBUFFER
+typedef struct openfilestruct {
+    char *filename;
+#ifndef NANO_SMALL
+    struct stat originalfilestat;
+#endif
+    struct openfilestruct *next;	/* Next node */
+    struct openfilestruct *prev;	/* Previous node */
+    struct filestruct *fileage;	/* Current file */
+    struct filestruct *filebot;	/* Current file's last line */
+#ifndef NANO_SMALL
+    struct filestruct *file_mark_beginbuf;
+				/* Current file's beginning marked line */
+    int file_mark_beginx;	/* Current file's beginning marked line's
+				   x-coordinate position */
+#endif
+    int file_current_x;		/* Current file's x-coordinate position */
+    int file_current_y;		/* Current file's y-coordinate position */
+    int file_flags;		/* Current file's flags: modification
+				   status (and marking status, if
+				   available) */
+    int file_placewewant;	/* Current file's place we want */
+    int file_totlines;		/* Current file's total number of lines */
+    long file_totsize;		/* Current file's total size */
+    int file_lineno;		/* Current file's line number */
+} openfilestruct;
+#endif
+
 typedef struct shortcut {
    int val;		/* Actual sequence that generates the keystroke */
    int altval;		/* Alt key # for this function, or 0 for none */
@@ -78,17 +132,57 @@ typedef struct shortcut {
    int misc2;
    int viewok;		/* is this function legal in view mode? */
    int (*func) (void);	/* Function to call when we catch this key */
-   char *desc;		/* Description, e.g. "Page Up" */
-   char *help;		/* Help file entry text */
+   const char *desc;	/* Description, e.g. "Page Up" */
+#ifndef DISABLE_HELP
+   const char *help;	/* Help file entry text */
+#endif
+   struct shortcut *next;
 } shortcut;
 
+#ifndef NANO_SMALL
 typedef struct toggle {
    int val;		/* Sequence to toggle the key.  Should only need 1 */
-   char *desc;		/* Description for when toggle is, uh, toggled,
-			   e.g. "Pico Messages", we'll append Enabled or
+   const char *desc;	/* Description for when toggle is, uh, toggled,
+			   e.g. "Pico Messages"; we'll append Enabled or
 			   Disabled */
    int flag;		/* What flag actually gets toggled */
+   struct toggle *next;
 } toggle;
+#endif /* !NANO_SMALL */
+
+#ifdef ENABLE_NANORC
+typedef struct rcoption {
+   const char *name;
+   int flag;
+} rcoption;
+#endif /* ENABLE_NANORC */
+
+#ifdef ENABLE_COLOR
+
+typedef struct colortype {
+    int fg;			/* fg color */
+    int bg;			/* bg color */
+    int bright;			/* Is this color A_BOLD? */
+    int pairnum;		/* Color pair number used for this fg/bg */
+    char *start;		/* Start (or all) of the regex string */
+    char *end;			/* End of the regex string */
+    struct colortype *next;
+} colortype;
+
+typedef struct exttype {
+    char *val;
+    struct exttype *next;
+} exttype;
+
+typedef struct syntaxtype {
+    char *desc;			/* Name of this syntax type */
+    exttype *extensions;	/* List of extensions that this applies to */
+    colortype *color;		/* color struct for this syntax */
+    struct syntaxtype *next;
+} syntaxtype;
+
+#endif /* ENABLE_COLOR */
+
 
 /* Bitwise flags so we can save space (or more correctly, not waste it) */
 
@@ -106,14 +200,26 @@ typedef struct toggle {
 #define SAMELINEWRAP		(1<<11)
 #define VIEW_MODE		(1<<12)
 #define USE_MOUSE		(1<<13)
-#define USE_REGEXP              (1<<14)
-#define REGEXP_COMPILED         (1<<15)
-#define TEMP_OPT         	(1<<16)
-#define CUT_TO_END         	(1<<17)
-#define DISABLE_CURPOS         	(1<<18)
+#define USE_REGEXP		(1<<14)
+#define REGEXP_COMPILED		(1<<15)
+#define TEMP_OPT		(1<<16)
+#define CUT_TO_END		(1<<17)
+#define REVERSE_SEARCH		(1<<18)
+#define MULTIBUFFER		(1<<19)
+#define CLEAR_BACKUPSTRING	(1<<20)
+#define DOS_FILE		(1<<21)
+#define MAC_FILE		(1<<22)
+#define SMOOTHSCROLL		(1<<23)
+#define DISABLE_CURPOS		(1<<24)	/* Damn, we still need it */
+#define ALT_KEYPAD		(1<<25)
+#define NO_CONVERT		(1<<26)
+#define BACKUP_FILE		(1<<27)
+#define NO_RCFILE		(1<<28)
+#define COLOR_SYNTAX		(1<<28)
 
-/* Control key sequences, chaning these would be very very bad */
+/* Control key sequences, changing these would be very very bad */
 
+#define NANO_CONTROL_SPACE 0
 #define NANO_CONTROL_A 1
 #define NANO_CONTROL_B 2
 #define NANO_CONTROL_C 3
@@ -172,8 +278,14 @@ typedef struct toggle {
 #define NANO_ALT_X 'x'
 #define NANO_ALT_Y 'y'
 #define NANO_ALT_Z 'z'
+#define NANO_ALT_PERIOD '.'
+#define NANO_ALT_COMMA ','
+#define NANO_ALT_LCARAT '<'
+#define NANO_ALT_RCARAT '>'
+#define NANO_ALT_BRACKET ']'
+#define NANO_ALT_SPACE ' '
 
-/* Some semi-changeable keybindings, dont play with unless you're sure you
+/* Some semi-changeable keybindings; don't play with unless you're sure you
 know what you're doing */
 
 #define NANO_INSERTFILE_KEY	NANO_CONTROL_R
@@ -208,7 +320,6 @@ know what you're doing */
 #define NANO_FIRSTLINE_KEY	NANO_PREVPAGE_KEY
 #define NANO_LASTLINE_KEY	NANO_NEXTPAGE_KEY
 #define NANO_CANCEL_KEY		NANO_CONTROL_C
-#define NANO_CASE_KEY		NANO_CONTROL_A
 #define NANO_REFRESH_KEY	NANO_CONTROL_L
 #define NANO_JUSTIFY_KEY	NANO_CONTROL_J
 #define NANO_JUSTIFY_FKEY	KEY_F(4)
@@ -218,6 +329,7 @@ know what you're doing */
 #define NANO_FORWARD_KEY	NANO_CONTROL_F
 #define NANO_BACK_KEY		NANO_CONTROL_B
 #define NANO_MARK_KEY		NANO_CONTROL_6
+#define NANO_ALT_MARK_KEY	NANO_ALT_A
 #define NANO_HOME_KEY		NANO_CONTROL_A
 #define NANO_END_KEY		NANO_CONTROL_E
 #define NANO_DELETE_KEY		NANO_CONTROL_D
@@ -227,7 +339,19 @@ know what you're doing */
 #define NANO_ENTER_KEY		NANO_CONTROL_M
 #define NANO_FROMSEARCHTOGOTO_KEY NANO_CONTROL_T
 #define NANO_TOFILES_KEY	NANO_CONTROL_T
+#define NANO_APPEND_KEY		NANO_ALT_A
+#define NANO_PREPEND_KEY	NANO_ALT_P
+#define NANO_OPENPREV_KEY	NANO_ALT_LCARAT
+#define NANO_OPENNEXT_KEY	NANO_ALT_RCARAT
+#define NANO_OPENPREV_ALTKEY	NANO_ALT_COMMA
+#define NANO_OPENNEXT_ALTKEY	NANO_ALT_PERIOD
+#define NANO_BRACKET_KEY	NANO_ALT_BRACKET
+#define NANO_EXTCMD_KEY		NANO_CONTROL_X
+#define NANO_NEXTWORD_KEY	NANO_CONTROL_SPACE
+#define NANO_PREVWORD_KEY	NANO_ALT_SPACE
 
+#ifndef NANO_SMALL
+/* Toggles do not exist with NANO_SMALL. */
 #define TOGGLE_CONST_KEY	NANO_ALT_C
 #define TOGGLE_AUTOINDENT_KEY	NANO_ALT_I
 #define TOGGLE_SUSPEND_KEY	NANO_ALT_Z
@@ -235,39 +359,29 @@ know what you're doing */
 #define TOGGLE_PICOMODE_KEY	NANO_ALT_P
 #define TOGGLE_MOUSE_KEY	NANO_ALT_M
 #define TOGGLE_CUTTOEND_KEY	NANO_ALT_K
-#define TOGGLE_REGEXP_KEY	NANO_ALT_E
+#define TOGGLE_REGEXP_KEY	NANO_ALT_R
 #define TOGGLE_WRAP_KEY		NANO_ALT_W
+#define TOGGLE_BACKWARDS_KEY	NANO_ALT_B
+#define TOGGLE_CASE_KEY		NANO_ALT_C
+#define TOGGLE_LOAD_KEY		NANO_ALT_F
+#define TOGGLE_DOS_KEY		NANO_ALT_D
+#define TOGGLE_MAC_KEY		NANO_ALT_O
+#define TOGGLE_SMOOTH_KEY	NANO_ALT_S
+#define TOGGLE_NOCONVERT_KEY	NANO_ALT_N
+#define TOGGLE_BACKUP_KEY	NANO_ALT_B
+#define TOGGLE_SYNTAX_KEY	NANO_ALT_Y
+#endif /* !NANO_SMALL */
 
-#define MAIN_LIST_LEN 26
 #define MAIN_VISIBLE 12
-#define WHEREIS_LIST_LEN 6
-#define REPLACE_LIST_LEN 6
-#define REPLACE_LIST_2_LEN 3
-#define GOTO_LIST_LEN 3
-#define HELP_LIST_LEN 3
-#define SPELL_LIST_LEN 1
-
-#ifndef DISABLE_BROWSER
-#define WRITEFILE_LIST_LEN 2
-#define BROWSER_LIST_LEN 3
-#else
-#define WRITEFILE_LIST_LEN 1
-#endif
-
-#ifdef HAVE_REGEX_H
-#define TOGGLE_LEN 9
-#else
-#define TOGGLE_LEN 8
-#endif
 
 #define VIEW 1
 #define NOVIEW 0
 
-#define TOP 2
-#define CENTER 1
-#define BOTTOM 0
+typedef enum {
+    CENTER, TOP, NONE
+} topmidbotnone;
 
-/* Minimum editor window rows required for Nano to work correctly */
+/* Minimum editor window rows required for nano to work correctly */
 #define MIN_EDITOR_ROWS 3
 
 /* Default number of characters from end-of-line where text wrapping occurs */
@@ -276,4 +390,4 @@ know what you're doing */
 /* Minimum fill length (space available for text before wrapping occurs) */
 #define MIN_FILL_LENGTH 10
 
-#endif /* ifndef NANO_H */ 
+#endif /* !NANO_H */

nano.info

@@ -1,405 +0,0 @@
-This is nano.info, produced by makeinfo version 4.0 from nano.texi.
-
-INFO-DIR-SECTION Editors
-START-INFO-DIR-ENTRY
-* Nano: (nano).                 Small and friendly text editor.
-END-INFO-DIR-ENTRY
-
-
-File: nano.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)
-
-   This manual documents GNU nano, a small and friendly text editor.
-
-* Menu:
-
-* Introduction::
-* Editor Basics::
-* Online Help::
-* Feature Toggles::
-* The File Browser::
-* Pico Compatibility::
-* Building and Configure Options::
-
-
-File: nano.info,  Node: Introduction,  Next: Editor Basics,  Prev: Top,  Up: Top
-
-Introduction
-************
-
-   GNU `nano' is a small and friendly text editor.  Besides basic text
-editing, `nano' offers many extra features like an interactive search
-and replace, goto line number, auto-indentation, feature toggles,
-internationalization support, and filename tab completion.
-
-* Menu:
-
-* Overview::
-* Command Line Options::
-
-
-File: nano.info,  Node: Overview,  Next: Command Line Options,  Prev: Introduction,  Up: Introduction
-
-Overview
-========
-
-   `nano' [GNU long option] [option] +LINE [  FILE ... ]
-
-   The original goal for `nano' was a complete bug-for-bug compatible
-emulation of Pico, but consistency is now a slightly higher priority.
-There is a flag to implement (nearly) complete Pico emulation, (option
--p or GNU long option -pico).  This can also be toggled from within
-`nano' by typing Meta-P.  *Note Pico Compatibility::, for more info.
-
-   Email bug reports to <nano@nano-editor.org>.
-
-
-File: nano.info,  Node: Command Line Options,  Prev: Overview,  Up: Introduction
-
-Command Line Options
-====================
-
-   `nano' takes the following options from the command line:
-`-T [num, --tabsize=[num]'
-     Set the displayed tab length to [num] columns.
-
-`-R, --regexp'
-     Turns on regular expression search and search/replace.
-
-`-V, --version'
-     Print the version number and copyright and quit.
-
-`-c, --const'
-     Constantly display the cursor posititon and line number on the
-     statusbar.
-
-`-h, --help'
-     Print the usage and exit.
-
-`-i, --autoindent'
-     Automatically indent new lines to the same number of spaces and
-     tabs as the previous line.
-
-`-k, --cut'
-     Makes ^K cut from the current cursor position to the end of the
-     current line.
-
-`-l, --nofollow'
-     When writing files, if the given file is a symbolic link it is
-     removed and a new file is created.
-
-`-m, --mouse'
-     Enables the use of the mouse to select text (currently only useful
-     for running under the X window system).
-
-`-p, --pico'
-     Emulate Pico as closely as possible, sacrificing consistency for
-     correct emulation.  *Note Pico Compatibility::, for more info.
-
-`-r [#cols], --fill=[#cols].'
-     Wrap lines at column #cols.  By default this is the width of the
-     screen, less eight.
-
-`-s [prog], --speller=[prog]'
-     Invoke [prog] as the spell checker.  By default, `nano' uses its
-     own interactive spell checker that requires the `spell' program be
-     installed on your system.
-
-`-t, --tempfile'
-     Do not ask whether or not to save the current contents of the file
-     when exiting, assume yes.  This is most useful when using `nano'
-     as the composer of a mailer program.
-
-`-x, --nohelp'
-     In Expert Mode, the Shortcut Lists will not appear at the bottom
-     of the screen.  This affects the location of the statusbar as
-     well, as in Expert Mode it is located at the very bottom of the
-     editor.
-
-     Note: When accesing the help system, Expert Mode is temporarily
-     disabled to display the help system navigation keys.
-
-`-v, --view'
-     Do not allow the contents of the file to be altered.  Note that
-     this flag should NOT be used in place of correct file permissions
-     to implement a read-only file.
-
-`-w, --nowrap'
-     Do not wrap long lines at any length. This option overrides any
-     value for -r.
-
-`-z, --suspend'
-     Enable suspend ability of `nano' using the system's suspend
-     keystroke (usually ^Z).
-
-`+LINE'
-     Start at line number LINE instead of the default of line 1.
-
-
-File: nano.info,  Node: Editor Basics,  Next: Online Help,  Prev: Introduction,  Up: Top
-
-Editor Basics
-*************
-
-* Menu:
-
-* Entering Text::
-* Special Functions::
-* The Titlebar::
-* The Statusbar::
-* Shortcut Lists::
-
-
-File: nano.info,  Node: Entering Text,  Next: Special Functions,  Prev: Editor Basics,  Up: Editor Basics
-
-Entering Text
-=============
-
-   All key sequences in `nano' are entered using the keyboard.  `nano'
-is a "modeless" editor, all keys with the exception of Control and Meta
-key sequences will enter text into the file being edited.
-
-
-File: nano.info,  Node: Special Functions,  Next: The Titlebar,  Prev: Entering Text,  Up: Editor Basics
-
-Special Functions
-=================
-
-   Special functions use the Control key (displayed in the help and
-shotcut lists as ^) or the Meta key (displayed as M).
-
-   * Control key sequences are entered by holding down the Control key
-     and pressing the desired letter.
-
-   * Meta key sequences can be entered in a number of possible ways:
-     Pressing the Escape key, then releasing it and pressing the
-     desired key, or holding down the Alt key while pressing the desired
-     key.  This varies from keyboard to keyboard, and certain commercial
-     operating systems "swallow" the Alt key so that it never reaches
-     the application. If your operating system does this, you should
-     use the Escape key to generate Meta key sequences.
-
-
-File: nano.info,  Node: The Titlebar,  Next: The Statusbar,  Prev: Special Functions,  Up: Editor Basics
-
-The Titlebar
-============
-
-   The titlebar is the line displayed at the top of the editor.  There
-are three sections: left, center and right. The section on the left
-displays the version of `nano' being used.  The center section displays
-the current file name, or "New Buffer" if the file has not yet been
-named.  The section on the right will display "Modified" if the file
-has been modified since it ws last saved or opened.
-
-   Special modes: When nano is in "File browser" mode, the center
-section will display the current directory instead of the filename.
-*Note The File Browser::.
-
-
-File: nano.info,  Node: The Statusbar,  Next: Shortcut Lists,  Prev: The Titlebar,  Up: Editor Basics
-
-The Statusbar
-=============
-
-   The statusbar is located three lines from the bottom of the screen
-(or the bottom line in Expert Mode.  *Note Expert Mode::, for more info.
-
-   The Statusbar shows important and informational messages.  Any error
-messages that occur from using the editor will appear on the statusbar.
-Any questions that are asked of the user will be asked on the statusbar,
-and any user input (serch strings, file names, etc) will be input on the
-statusbar.
-
-
-File: nano.info,  Node: Shortcut Lists,  Prev: The Statusbar,  Up: Editor Basics
-
-Shortcut Lists
-==============
-
-   The Shorcut Lists are the two lines at the bottom of the screen
-which show some of the more commonly used functions in the editor. The
-exact functions which are displayed depend on whether Pico
-Compatibility Mode mode is enabled. *Note Pico Compatibility::, for
-more info.
-
-
-File: nano.info,  Node: Online Help,  Next: Feature Toggles,  Prev: Editor Basics,  Up: Top
-
-Online Help
-***********
-
-   The online help system in `nano' is available by pressing ^G.  It is
-fairly self explanatory, documenting the various parts of the editor
-and available keystrokes.  Navigation is via the ^Y (Page Up) and ^V
-(Page Down) keys.  ^X exits the help system.
-
-
-File: nano.info,  Node: Feature Toggles,  Next: The File Browser,  Prev: Online Help,  Up: Top
-
-Feature Toggles
-***************
-
-   Toggles allow you to change certain aspects of the editor that would
-normally be done via command line flags. They are invoked via certain
-Meta key sequenced. *Note Special Functions::, for more info.  The
-following toggles are available:
-
-`Constant Update Toggle (Meta-C)'
-     toggles the -c (-const) command line flag.
-
-`Regular Expressions Toggle (Meta-E)'
-     toggles the -R (-regexp) command line flag.
-
-`AutoIndent Toggle (Meta-I)'
-     toggles the -i (-autoindent) command line flag.
-
-`Cut To End Toggle (Meta-K)'
-     toggles the -k (-cut) command line flag.
-
-`Cut To End Toggle (Meta-M)'
-     toggles the -m (-mouse) command line flag.
-
-`Pico Mode Toggle (Meta-P)'
-     toggles the -p (-pico) command line flag.  *Note Pico
-     Compatibility::, for more info.
-
-`AutoWrap Toggle (Meta-W)'
-     toggles the -w (-nowrap) command line flag.
-
-`Expert/Nohelp Toggle (Meta-X)'
-     toggles the -x (-nohelp) command line flag.
-
-`Suspend Toggle (Meta-Z)'
-     toggles the -z (-suspend) command line flag.
-
-
-File: nano.info,  Node: The File Browser,  Next: Pico Compatibility,  Prev: Feature Toggles,  Up: Top
-
-The File Browser
-****************
-
-   When reading or writilg files, pressing ^T will invoke the file
-browser.  Here, one can navigate directories in a graphical manner in
-order to find the desired file.
-
-   Basic movement in the file browser is accomplished with he arrow keys
-and page up/down.  The behavior of the enter (or 's') key varies by what
-is currently selected.  If the currently selected object is a directory,
-the file browser will enter and display the contects of the directory.
-If the object is a file, this filename and path are copied to the
-statusbar and the file browser is exited.
-
-
-File: nano.info,  Node: Pico Compatibility,  Next: Building and Configure Options,  Prev: The File Browser,  Up: Top
-
-Pico Compatibility
-******************
-
-   Nano does not completely emulate Pico by default.  The following
-differences apply to the default mode and Pico Compatibility mode:
-
-`Displayed Shortcuts'
-     By default, the following shortcuts are displayed in the Shortcut
-     Lists:
-
-     ^G ^O ^\ ^Y ^K ^C
-     ^X ^R ^W ^V ^U ^T
-
-     Related functions are listed above or below each other by default.
-     The Justify function is not listed, instead the "Replace"
-     function is displayed. Also, he "Read File" and "WriteOut"
-     functions are aligned for consistency.
-
-     In Pico Compatibility mode, the default Pico shortcuts are
-     displayed:
-
-     ^G ^O ^R ^Y ^K ^C
-     ^X ^J ^W ^V ^U ^T
-
-`Previous String Text'
-     By default, previously entered string for a function (search
-     string, file name) will be placed on the statusbar, and is
-     editable.  This is done so there is consistency across all
-     functions.  For example: even if there is a previous replace
-     string, it can always be deleted if one wishes to perform an empty
-     string replace.
-
-     In Pico Compatibility Mode, the previously entered text in a
-     search or replace will appear in brackets, and is not editable.
-     It is not a simple matter to do an empty string replace when a
-     previous replace string exists, for example.  When writing a file,
-     the previous filename will be displayed in the editable text
-     portion of the editor.
-
-`Interactive Replace and Spell Checker'
-     It is worth noting that the `nano' replace function is interactive,
-     i.e. it does not stop after one search string is found and
-     automatically replace it.  The `nano' implementation will stop at
-     each search string found and query whether to replace this
-     instance or not.  The internal spell checker operates similarly.
-     Note that these is no way to force these functions to behave in
-     the Pico fashion.
-
-
-File: nano.info,  Node: Building and Configure Options,  Prev: Pico Compatibility,  Up: Top
-
-Building and Configure Options
-******************************
-
-   Building nano from source is fairly straightforward if you are
-familiar with compiling programs with autoconf support:
-
-   tar xvfz nano-x.y.z.tar.gz (where x.y.z is the version of nano) cd
-nano-x.y.z/ ./configure make make install
-
-   if you are looking to optimize nano for size, you may want to
-consider the following command line options:
-
-`--disable-tabcomp'
-     Disable the tab completion code when reading or writing files.
-
-`--disable-justify'
-     Disable the justify (^J)/unjustify (^U) functions in the editor.
-
-`--disable-speller'
-     Disables spell checker abillity.
-
-`--disable-help'
-     Disables the help function (^G).  Disabling this option maks the
-     binary much smaller, but makes it difficult for new users to learn
-     more than very basic things about using the editor.
-
-`--disable-browser'
-     Disables the mini file browser (^O) when reading or writing files.
-
-`--enable-tiny'
-     This options disables all the above.  It also disables some of the
-     larger internals of the editor, like the marker code (^^) and the
-     cut to line (-k) option which it depends on to work properly.  It
-     also disables the function toggles and mouse support.
-
-`--disable-wrapping'
-     Disables all word wrapping in the editor.  This also eliminates the
-     -w command line flag, as nonwrapping is then the default behavior.
-
-
-
-Tag Table:
-Node: Top199
-Node: Introduction507
-Node: Overview933
-Node: Command Line Options1513
-Ref: Expert Mode3236
-Node: Editor Basics4078
-Node: Entering Text4303
-Node: Special Functions4643
-Node: The Titlebar5497
-Node: The Statusbar6194
-Node: Shortcut Lists6774
-Node: Online Help7166
-Node: Feature Toggles7542
-Node: The File Browser8685
-Node: Pico Compatibility9394
-Node: Building and Configure Options11436
-
-End Tag Table

nano.spec.in

@@ -0,0 +1,44 @@
+%define name	@PACKAGE@
+%define ver	@VERSION@
+%define rel	1
+
+Summary	: Pico editor clone with enhancements
+Name		: %{name}
+Version		: %{ver}
+Release		: %{rel}
+Copyright	: GPL
+Group		: Console/Editors
+URL		: http://www.nano-editor.org
+Source		: http://www.nano-editor.org/dist/v1.1/%{name}-%{ver}.tar.gz
+BuildRoot	: /var/tmp/%{name}-buildroot
+Requires	: ncurses
+
+%description
+GNU nano is a small and friendly text editor.  It aims to emulate the Pico
+text editor while also offering a few enhancements.
+
+%prep
+%setup -q
+
+%build
+%configure --enable-extra
+make RPM_OPT_FLAGS="$RPM_OPT_FLAGS"
+
+%install
+rm -rf "$RPM_BUILD_ROOT"
+make DESTDIR="$RPM_BUILD_ROOT" install
+
+%files
+%defattr(-,root,root)
+%doc AUTHORS BUGS COPYING ChangeLog INSTALL NEWS README THANKS TODO nanorc.sample
+%{_bindir}/nano
+%{_mandir}/*/*
+%{_datadir}/locale/*/LC_MESSAGES/nano.mo
+%{_infodir}/nano.info*
+
+%changelog
+* Sat Mar 30 2002 Chris Allegretta <chrisa@asty.org>
+- Accepted into main distribution
+- Added Packager and URL tage from original spec file.
+* Tue Mar 06 2002 Brett Pemberton <generica@email.com>
+- Initial spec-file

nano.texi

@@ -8,12 +8,12 @@
 @c Run `makeinfo' rather than `texinfo-format-buffer'.
 @smallbook
 @set EDITION 0.1
-@set VERSION 1.0.1
-@set UPDATED 12 Feb 2001
+@set VERSION 1.1.12
+@set UPDATED 30 Jul 2002
 
 @dircategory Editors
 @direntry
-* Nano: (nano).                 Small and friendly text editor.
+* nano: (nano).                 Small and friendly text editor.
 @end direntry
 
 @c tex
@@ -23,7 +23,7 @@
 @titlepage
 @title GNU @code{nano}
 @subtitle a small and friendly text editor.
-@subtitle version 1.0.1
+@subtitle version 1.1.12
 
 @author Chris Allegretta
 @page
@@ -33,28 +33,28 @@ editor.
 
 This manual is part of the GNU @code{nano} distribution.@*
 @sp4
-Copyright (C) 1999, 2000, 2001 Chris Allegretta.
+Copyright (C) 1999, 2000, 2001, 2002 Chris Allegretta.
 
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Permission is granted to make and distribute verbatim copies of this
+manual provided the copyright notice and this permission notice are
+preserved on all copies.
 
 @iftex
 Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph (this
+paragraph not being relevant to the printed manual).
 @end iftex
 
 Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the entire
-resulting derived work is distributed under the terms of a permission
-notice identical to this one.
+manual under the conditions for verbatim copying, provided that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
 
 Permission is granted to copy and distribute translations of this manual
 into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation approved
-by the Foundation.
+except that this permission notice may be stated in a translation
+approved by the Foundation.
 
 You may contact the author by:
 e-mail: @email{chrisa@@asty.org}@*
@@ -62,7 +62,8 @@ e-mail: @email{chrisa@@asty.org}@*
 
 @node Top, Introduction, (dir), (dir)
 
-This manual documents GNU nano, a small and friendly text editor.
+This manual documents GNU @code{nano}, a small and friendly text
+editor.
 
 @menu
 * Introduction::
@@ -77,11 +78,10 @@ This manual documents GNU nano, a small and friendly text editor.
 @node Introduction, Editor Basics, Top, Top
 @chapter Introduction
 
-GNU @code{nano} is a small and friendly text editor.  Besides basic
-text editing, @code{nano} offers many extra features like an
-interactive search and replace, goto line number, auto-indentation,
-feature toggles, internationalization support, and filename tab
-completion.
+GNU @code{nano} is a small and friendly text editor.  Besides basic text
+editing, @code{nano} offers many extra features like an interactive
+search and replace, goto line number, auto-indentation, feature toggles,
+internationalization support, and filename tab completion.
 
 @menu
 * Overview::
@@ -94,7 +94,7 @@ completion.
 @code{nano} [GNU long option] [option] +LINE [ @var{ file ...} ]
 
 The original goal for @code{nano} was a complete bug-for-bug compatible
-emulation of Pico, but consistency is now a slightly higher priority.
+emulation of Pico, but consistency is now a slightly higher priority. 
 There is a flag to implement (nearly) complete Pico emulation, (option -p
 or GNU long option --pico).  This can also be toggled from within
 @code{nano} by typing Meta-P.  @xref{Pico Compatibility}, for more
@@ -106,19 +106,58 @@ Email bug reports to @email{nano@@nano-editor.org}.
 @section Command Line Options
 
 @code{nano} takes the following options from the command line:
+
 @table @code
 
-@item -T [num, --tabsize=[num]
-Set the displayed tab length to [num] columns.
+@item -B, --backup
+When saving a file, back up the previous version of it to the current
+filename suffixed with a ~.
+
+@item -D, --dos
+Write file in DOS format.
+
+@item -F, --multibuffer
+Enable multiple file buffers, if available.
+
+@item -I, --ignorercfiles
+Don't look at /etc/nanorc or ~/.nanorc, if nanorc support is available.
+
+@item -K, --keypad
+Do not use the ncurses keypad() call unless necessary.  Try this flag if
+you find that the arrow keys on the numeric keypad do not work for you
+under @code{nano}.
+
+@item -M, --mac
+Write file in Mac format.
+
+@item -N, --noconvert
+Do not convert files from DOS/Mac format.
+
+@item -Q [str], --quotestr [str]
+Set the quoting string for justifying.  The default is
+"^([ \t]*[|>:@}#])+" if regular expression support is available, or
+"> " otherwise.
+
+Set the quoting string for justifying.  The default is "> ".
 
 @item -R, --regexp
 Turns on regular expression search and search/replace.
 
+@item -S, --smooth
+Enables smooth scrolling.
+
+@item -T [num], --tabsize=[num]
+Set the displayed tab length to [num] columns.
+
 @item -V, --version 
 Print the version number and copyright and quit.
 
+@item -Y, --syntax=[str]
+Specify a specific syntax highlighting from the .nanorc to use, if
+available.
+
 @item -c, --const
-Constantly display the cursor posititon and line number on the statusbar.
+Constantly display the cursor position and line number on the statusbar.
 
 @item -h, --help
 Print the usage and exit.
@@ -139,13 +178,19 @@ and a new file is created.
 Enables the use of the mouse to select text (currently only useful for
 running under the X window system).
 
+@item -o [dir], --operatingdir=[dir]
+Set operating directory. Makes @code{nano} set up something similar to a
+chroot.
+
 @item -p, --pico
 Emulate Pico as closely as possible, sacrificing consistency for correct
 emulation.  @xref{Pico Compatibility}, for more info.
 
 @item -r [#cols], --fill=[#cols].
 Wrap lines at column #cols.  By default this is the width of the screen,
-less eight.
+less eight. If this value is negative, wrapping will occur at #cols from
+the right of the screen, allowing it to vary along with the screen width
+if the screen is resized.
 
 @item -s [prog], --speller=[prog]
 Invoke [prog] as the spell checker.  By default, @code{nano} uses its
@@ -163,7 +208,7 @@ In Expert Mode, the Shortcut Lists will not appear at the bottom of the
 screen.  This affects the location of the statusbar as well, as in Expert
 Mode it is located at the very bottom of the editor.
 
-Note: When accesing the help system, Expert Mode is temporarily disabled
+Note: When accessing the help system, Expert Mode is temporarily disabled
 to display the help system navigation keys.
 
 @item -v, --view
@@ -179,6 +224,9 @@ Do not wrap long lines at any length. This option overrides any value for
 Enable suspend ability of @code{nano} using the system's suspend
 keystroke (usually ^Z).
 
+@item -a, -b, -e, -f, -g, -j
+Ignored, for compatibility with Pico.
+
 @item +LINE
 Start at line number LINE instead of the default of line 1.
 @end table
@@ -205,7 +253,7 @@ edited.
 @section Special Functions
 
 Special functions use the Control key (displayed in the help and
-shotcut lists as ^) or the Meta key (displayed as M).
+shortcut lists as ^) or the Meta key (displayed as M).
      
 @itemize @bullet
      
@@ -230,31 +278,31 @@ three sections: left, center and right. The section on the left displays
 the version of @code{nano} being used.  The center section displays the
 current file name, or "New Buffer" if the file has not yet been named.
 The section on the right will display "Modified" if the file has been
-modified since it ws last saved or opened.
+modified since it was last saved or opened.
 
-Special modes: When nano is in "File browser" mode, the center section
-will display the current directory instead of the filename. 
+Special modes: When @code{nano} is in "File browser" mode, the center
+section will display the current directory instead of the filename.
 @xref{The File Browser}.
 
 @node The Statusbar, Shortcut Lists, The Titlebar, Editor Basics
 @section The Statusbar
 
-The statusbar is located three lines from the bottom of the screen (or the
-bottom line in Expert Mode.  @xref{Expert Mode}, for more info.  
+The statusbar is located three lines from the bottom of the screen (or
+the bottom line in Expert Mode.  @xref{Expert Mode}, for more info.
 
 The Statusbar shows important and informational messages.  Any error
 messages that occur from using the editor will appear on the statusbar.
 Any questions that are asked of the user will be asked on the statusbar,
-and any user input (serch strings, file names, etc) will be input on the
-statusbar.
+and any user input (search strings, file names, etc) will be input on
+the statusbar.
 
 @node Shortcut Lists, , The Statusbar, Editor Basics
 @section Shortcut Lists
 
-The Shorcut Lists are the two lines at the bottom of the screen which show
-some of the more commonly used functions in the editor. The exact
-functions which are displayed depend on whether Pico Compatibility Mode mode
-is enabled. @xref{Pico Compatibility}, for more info.
+The Shortcut Lists are the two lines at the bottom of the screen which
+show some of the more commonly used functions in the editor. The exact
+functions which are displayed depend on whether Pico Compatibility Mode
+mode is enabled. @xref{Pico Compatibility}, for more info.
 
 @node Online Help, Feature Toggles, Editor Basics, Top
 @chapter Online Help
@@ -271,15 +319,18 @@ and ^V (Page Down) keys.  ^X exits the help system.
 Toggles allow you to change certain aspects of the editor that
 would normally be done via command line flags. They are invoked via
 certain Meta key sequenced. @xref{Special Functions}, for more info.
-The following toggles are available:
+The following global toggles are available:
 
 @table @code
 
-@item Constant Update Toggle (Meta-C)
-toggles the -c (--const) command line flag.
+@item Backup File Toggle (Meta-B)
+toggles the -B (--backup) command line flag.
 
-@item Regular Expressions Toggle (Meta-E)
-toggles the -R (--regexp) command line flag.
+@item DOS Format Toggle (Meta-D)
+toggles the -D (--dos) command line flag.
+
+@item Multiple Files Toggle (Meta-F)
+toggles the  -F (--multibuffer) command line flag.
 
 @item AutoIndent Toggle (Meta-I)
 toggles the -i (--autoindent) command line flag.
@@ -287,13 +338,19 @@ toggles the -i (--autoindent) command line flag.
 @item Cut To End Toggle (Meta-K)
 toggles the -k (--cut) command line flag.
 
-@item Cut To End Toggle (Meta-M)
+@item Mouse Toggle (Meta-M)
 toggles the -m (--mouse) command line flag.
 
+@item Mac Format Toggle (Meta-O)
+toggles the -M (--mac) command line flag.
+
 @item Pico Mode Toggle (Meta-P)
 toggles the -p (--pico) command line flag.
 @xref{Pico Compatibility}, for more info.
 
+@item Smooth Scrolling Toggle (Meta-S)
+toggles the -s (--smooth) command line flag.
+
 @item AutoWrap Toggle (Meta-W)
 toggles the -w (--nowrap) command line flag.
 
@@ -303,27 +360,34 @@ toggles the -x (--nohelp) command line flag.
 @item Suspend Toggle (Meta-Z)
 toggles the -z (--suspend) command line flag.
 
+@item Open Previous File Toggle (Meta-<)
+changes buffer to previously loaded file.
+
+@item Open Next File Toggle (Meta->)
+changes buffer to next loaded file.
+
+
 @end table
 
 @node The File Browser, Pico Compatibility, Feature Toggles, Top
 @chapter The File Browser
 
-When reading or writilg files, pressing ^T will invoke the file browser.
-Here, one can navigate directories in a graphical manner in order to find
-the desired file.
+When reading or writing files, pressing ^T will invoke the file browser.
+Here, one can navigate directories in a graphical manner in order to
+find the desired file.
 
 Basic movement in the file browser is accomplished with he arrow keys
-and page up/down.  The behavior of the enter (or 's') key varies by what 
-is currently selected.  If the currently selected object is a directory, 
-the file browser will enter and display the contects of the directory.  If
-the object is a file, this filename and path are copied to the statusbar
-and the file browser is exited.
+and page up/down.  The behavior of the enter (or 's') key varies by what
+is currently selected.  If the currently selected object is a directory,
+the file browser will enter and display the contents of the directory. 
+If the object is a file, this filename and path are copied to the
+statusbar and the file browser is exited.
 
 @node Pico Compatibility, Building and Configure Options, The File Browser, Top
 @chapter Pico Compatibility
 
-Nano does not completely emulate Pico by default.  The following differences
-apply to the default mode and Pico Compatibility mode:
+nano does not completely emulate Pico by default.  The following
+differences apply to the default mode and Pico Compatibility mode:
 
 @table @code
 @item Displayed Shortcuts
@@ -367,17 +431,17 @@ to force these functions to behave in the Pico fashion.
 @node Building and Configure Options, , Pico Compatibility, Top
 @chapter Building and Configure Options
 
-Building nano from source is fairly straightforward if you are familiar
+Building @code{nano} from source is fairly straightforward if you are familiar
 with compiling programs with autoconf support:
 
-tar xvfz nano-x.y.z.tar.gz (where x.y.z is the version of nano)
+tar xvfz nano-x.y.z.tar.gz (where x.y.z is the version of @code{nano})
 cd nano-x.y.z/
 ./configure
 make
 make install
 
-if you are looking to optimize nano for size, you may want to consider
-the following command line options:
+if you are looking to optimize @code{nano} for size, you may want to
+consider the following command line options:
 
 
 @table @code
@@ -389,29 +453,44 @@ Disable the tab completion code when reading or writing files.
 Disable the justify (^J)/unjustify (^U) functions in the editor.
 
 @item --disable-speller
-Disables spell checker abillity.
+Disables spell checker ability.
 
 @item --disable-help
-Disables the help function (^G).  Disabling this option maks the
-binary much smaller, but makes it difficult for new users
-to learn more than very basic things about using the editor.
+Disables the help function (^G).  Disabling this option makes the binary
+much smaller, but makes it difficult for new users to learn more than
+very basic things about using the editor.
 
 @item --disable-browser
 Disables the mini file browser (^O) when reading or writing files.
 
 @item --enable-tiny
-This options disables all the above.  It also disables some of
-the larger internals of the editor, like the marker code (^^) and
-the cut to line (-k) option which it depends on to work properly.
-It also disables the function toggles and mouse support.
+This options disables all the above.  It also disables some of the larger
+internals of the editor, like the marker code (^^) and the cut to line
+(-k) option which it depends on to work properly.  It also disables the
+function toggles and mouse support.
 
 @item --disable-wrapping
-Disables all word wrapping in the editor.  This also eliminates the 
--w command line flag, as nonwrapping is then the default behavior.
+Disables all word wrapping in the editor.  This also eliminates the -w
+command line flag, as nonwrapping is then the default behavior.
+
+@item --disable-mouse
+Disables all mouse functionality.  This also disables the -m command
+line flag which enables the mouse functions.
+
+@item --disable-operatingdir
+Disables setting of operating directory. This also disables the -o
+command line flag.
+
+@item --disable-nls
+Disables Native Language support. This will make the available GNU
+@code{nano} translations unusable.
+
+@item --with-slang
+Compiling GNU @code{nano} with Slang is supported, and will make the
+binary notably smaller than if compiled with ncurses or other curses
+libraries.
 
 @end table
 
 @contents
 @bye
-
-

nanorc.sample

@@ -0,0 +1,126 @@
+# Sample initialization file for GNU nano
+# Please note that you must have configured nano with 
+# --enable-nanorc for this file to be read!
+#
+# To make sure a value is not enabled, use "unset <option>"
+
+# Use auto-indentation
+# set autoindent
+
+# Backup files to filename~
+# set backup
+
+# Constantly update the cursor position
+# set const
+
+# Use cut to end of line with ^K by default
+# set cut
+
+# Use this value instead of the default
+# An out-of-range negative value can make nano die complaining that the
+# screen is too small
+# set fill -8
+
+# Use alternate keypad routines
+# set keypad
+
+# Allow multiple file buffers (using ^R inserts into separate buffer)
+# You must have configured with --enable-multibuffer or --enable-extra
+# for this to work
+#
+# set multibuffer
+
+# Don't convert files from DOS/Mac format
+# set noconvert
+
+# Don't follow symlinks when writing files
+# set nofollow
+
+# Don't display the help lists at the bottom of the screen
+# set nohelp
+
+# Don't wrap text at all
+# set nowrap
+
+# Set operating directory (chroot of sorts)
+# set operatingdir "~"
+
+# Use Pico Compatibility mode for the shortcut lists and search text
+# set pico
+
+# The email-quote string.  This is a "regular expression" if your
+# system supports them, otherwise a literal string.  Default
+# set quotestr "^([ \t]*[|>:}#])+" if you have regexps, otherwise
+# set quotestr "> ".
+# You can get old nano quoted-justify behavior via:
+# set quotestr "(> )+"
+
+# Do regular expression searches by default 
+# set regexp
+
+# Use smooth scrolling as the default
+# set smooth
+
+# Use this spelling checker instead of the default one
+# set speller aspell
+
+# Allow nano to be suspended with ^Z
+# set suspend
+
+# Use this tab size instead of the default; it must be greater than 0
+# set tabsize 4
+
+# Save automatically on exit, don't prompt
+# set tempfile
+
+# Disallow file modification, why would you want this in an rc file? ;)
+# set view
+
+# Color setup
+# Format: 
+# syntax "short description" ["filename regex" ...]
+# color foreground,background "regex" ["regex"...]
+#
+# Legal colors are: white, black, red, blue, green, yellow, purple, cyan
+# You may use the prefix "bright" to mean a stronger color highlight
+#
+# To use multi-line regexes use the start="regex" end="regex" format.
+#
+# If your system supports transparency, not specifying a background
+# color will use a transparent color.  If you don't want this, be sure
+# to set the background color to black or white.
+
+# syntax "c-file" ".*\.c$" ".*\.h$"
+# color red "\<[A-Z_]{2,}\>" 
+# color green "\<float\>" "\<char\>" "\<int\>" "\<void\>"
+# color green "\<static\>" "\<const\>" "\<struct\>" 
+# color brightyellow "\<if\>" "\<while\>" "\<do\>" "\<else\>" "\<case\>" "\<switch\>"
+# color brightcyan "#define" "#include" "#ifn*def" "#endif" 
+# color brightcyan "#elif" "#else" "#if"
+
+# You will in general want your comments and strings to come last,
+# because syntax highlighting rules will be applied in the order they are
+# read in
+
+# color brightyellow "<[^= ]*>" ""(\\.|[^\"])*""
+# color brightyellow start=""(\\.|[^\"])*\\( |	)*$" end="^(\\.|[^\"])*""
+# color brightblue "//.*"
+# color brightblue start="/\*" end="\*/"
+
+# Here are some short examples for TeX files and HTML
+# syntax "HTML" "\.html$"
+#
+# color blue start="<" end=">"
+# color red "&([^; ])*;"
+#
+# syntax "TeX" "\.tex$"
+#
+# color green "\\(.|([A-Za-z]*))"
+# color magenta "\{" "\}"
+# color blue "%.*"
+
+# For this you will probably want to set your editor to "nano -Y mutt"
+
+# syntax "mutt"
+# color green "^>.*"
+

po/.cvsignore

@@ -4,4 +4,7 @@ POTFILES
 *.gmo
 *.pot
 cat-id*
+messages
+messages.mo
+remove-potcdate.sed
 stamp-cat*

po/ChangeLog

@@ -1 +1,314 @@
+2002-10-17  Jordi Mallach  <jordi@sindominio.net>
+
+	* de.po: Updated translation by Michel Piefel.
+
+2002-10-14  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-10-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* es.po: Updated translation by Ricardo Javier Cárdenes Medina.
+
+2002-10-08  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+	* ms.po: Updated translation by Sharuzzaman Ahmat Raslan.
+
+2002-10-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* de.po: Updated translation by Michel Piefel.
+
+2002-10-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated translation.
+
+2002-10-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+	* gl.po: Updated translation by Jacobo Tarrío.
+	* pl.po: Updated translation by Wojciech Kotwica.
+
+2002-09-08  Jordi Mallach  <jordi@sindominio.net>
+
+	* ms.po: Updated translation by Sharuzzaman Ahmat Raslan.
+
+2002-09-08  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard. 
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-08-19  Jordi Mallach  <jordi@sindominio.net>
+
+	* de.po: Updated translation by Michael Piefel.
+	* ms.po: Updated translation by Sharuzzaman Ahmat Raslan.
+
+2002-07-31  Jordi Mallach  <jordi@sindominio.net>
+
+	* gl.po: Updated translation by Jacobo Tarrío.
+
+2002-07-31  Jordi Mallach  <jordi@sindominio.net>
+
+	* es.po: Updated translation by Ricardo Javier Cárdenes Medina.
+
+2002-07-31  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-07-30  Jordi Mallach  <jordi@sindominio.net>
+
+	* pl.po: Updated translation by Wojciech Kotwica.
+	* sv.po: Upadted translation by Christian Rose.
+
+2002-07-29  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated translation.
+
+2002-07-29  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-07-27  Jordi Mallach  <jordi@sindominio.net>
+
+	* pt_BR.po: New Brazilian Portuguese translation by
+	Claudio Neves.
+
+2002-07-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+
+2002-07-09  Jordi Mallach  <jordi@sindominio.net>
+
+	* de.po: Updated translation by Michael Piefel.
+
+2002-07-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-07-03  Jordi Mallach  <jordi@sindominio.net>
+
+	* ms.po: New Bahasa Melayu translation by
+	Sharuzzaman Ahmat Raslan.
+
+2002-06-03  gettextize  <bug-gnu-gettext@gnu.org>
+
+	* Makefile.in.in: Upgrade to gettext-0.11.2.
+	* Rules-quot: New file, from gettext-0.11.2.
+	* boldquot.sed: New file, from gettext-0.11.2.
+	* en@boldquot.header: New file, from gettext-0.11.2.
+	* en@quot.header: New file, from gettext-0.11.2.
+	* insert-header.sin: New file, from gettext-0.11.2.
+	* quot.sed: New file, from gettext-0.11.2.
+	* remove-potcdate.sin: New file, from gettext-0.11.2.
+
+2002-05-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+	* de.po: Updated translation by Michael Piefel.
+
+2002-05-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* it.po: Updated translation by Marco Colombo.
+	* gl.po: Updated translation by Jacobo Tarrío.
+	* ca.po: Updated translation.
+	* es.po: Updated translation.
+
+2002-05-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-05-05  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-04-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+
+2002-04-19  Jordi Mallach  <jordi@sindominio.net>
+
+	* ru.po: Updated translation by Sergey A. Ribalchenko.
+	* uk.po: Updated translation by Sergey A. Ribalchenko.
+
+2002-04-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* it.po: Updated translation by Marco Colombo.
+
+2002-04-13  Jordi Mallach  <jordi@sindominio.net>
+
+	* nl.po: Updated translation by Guus Sliepen.
+
+2002-04-10  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-04-05  Jordi Mallach  <jordi@sindominio.net>
+
+	* gl.po: Updated translation by Jacobo Tarrio.
+	* de.po: Updated translation by Michael Piefel.
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-03-29  Jordi Mallach  <jordi@sindominio.net>
+
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-03-27  Jordi Mallach  <jordi@sindominio.net>
+
+	* it.po: Updated translation by Marco Colombo.
+
+2002-03-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+
+2002-03-17  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-03-15  Jordi Mallach  <jordi@sindominio.net>
+
+	* pl.po: Updated translation by Wojciech Kotwica.
+
+2002-03-14  Jordi Mallach  <jordi@sindominio.net>
+
+	* uk.po, ru.po: Updated translations by Sergey A.
+	Ribalchenko.
+
+2002-03-12  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated to current CVS.
+	* es.po: Updated to current CVS.
+	* gl.po: Updated translation to current CVS by Jacobo Tarrio.
+
+2002-03-12  Jordi Mallach  <jordi@sindominio.net>
+
+	* gl.po: Updated translation by Jacobo Tarrio.
+
+2002-03-11  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-03-09  Jordi Mallach  <jordi@sindominio.net>
+
+	* id.po: Updated translation by Tedi Heriyanto.
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-03-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+	* de.po: Updated translation by Michael Piefel.
+
+2002-03-05  Jordi Mallach  <jordi@sindominio.net>
+
+	* pl.po: Updated translation by Wojciech Kotwica.
+
+2002-02-20  Jordi Mallach  <jordi@sindominio.net>
+
+	* nl.po: Updated translation by Guus Sliepen.
+
+2002-02-15  Jordi Mallach  <jordi@sindominio.net>
+
+	* nb.po: Updated translation by Stig E Sandoe.
+
+2002-02-15  Jordi Mallach  <jordi@sindominio.net>
+
+	* nb.po: Updated translation by Stig E Sandoe.
+
+2002-02-14  Jordi Mallach  <jordi@sindominio.net>
+
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-02-10  Jordi Mallach  <jordi@sindominio.net>
+
+	* hu.po: Updated translation by Gergely Nagy.
+
+2002-02-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* uk.po, ru.po: Updated translations by Sergey A.
+	Ribalchenko.
+
+2002-02-06  Jordi Mallach  <jordi@sindominio.net>
+
+	* hu.po: Updated translation by Gergely Nagy.
+
+2002-02-06  Jordi Mallach  <jordi@sindominio.net>
+
+	* cs.po: Incomplete update by Václav Haisman.
+
+2002-01-27  Jordi Mallach  <jordi@sindominio.net>
+
+	* it.po: Updated translation by Marco Colombo.
+
+2002-01-26  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+	* nn.po: Updated translation by Kjetil Torgrim Homme.
+	* de.po: Updated translation by Michael Piefel.
+
+2002-01-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-25  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-01-23  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-01-19  gettextize  <bug-gnu-utils@gnu.org>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+	* cat-id-tbl.c: Remove file.
+	* stamp-cat-id: Remove file.
+
+2002-01-19  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+2002-01-19  Jordi Mallach  <jordi@sindominio.net>
+
+	* da.po: Updated translation by Keld Simonsen.
+
+2002-01-17  Jordi Mallach  <jordi@sindominio.net>
+
+	* no.po: Removed, replaced by nn.po.
+	* nn.po: Updated translation by Kjetil Torgrim Homme.
+	* nb.po: New Norwegian bokmål translation by Stig E Sandoe.
+
+2002-01-12  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-10  Jordi Mallach  <jordi@sindominio.net>
+
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-08  Jordi Mallach  <jordi@sindominio.net>
+
+	* ru.po, uk.po: Updated translations by Sergey A.
+	Ribalchenko.
+	* fr.po: Updated translation by Jean-Philippe Guérard.
+
+2002-01-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* de.po: Updated translation by Michael Piefel.
+
+2002-01-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* sv.po: Updated translation by Christian Rose.
+
+2002-01-07  Jordi Mallach  <jordi@sindominio.net>
+
+	* ca.po: Updated.
+	* es.po: Updated.
+
+
 $Id$

po/Makefile.in.in

@@ -1,11 +1,12 @@
-# $Id$
-# Makefile for program source directory in GNU NLS utilities package.
-# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
 #
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
 
 PACKAGE = @PACKAGE@
 VERSION = @VERSION@
@@ -19,234 +20,298 @@ VPATH = @srcdir@
 
 prefix = @prefix@
 exec_prefix = @exec_prefix@
-datadir = $(prefix)/@DATADIRNAME@
+datadir = @datadir@
 localedir = $(datadir)/locale
-gnulocaledir = $(prefix)/share/locale
-gettextsrcdir = $(prefix)/share/gettext/po
-subdir = po
+gettextsrcdir = $(datadir)/gettext/po
 
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = $(top_srcdir)/@MKINSTALLDIRS@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
 
-CC = @CC@
-GENCAT = @GENCAT@
-GMSGFMT = PATH=../src:$$PATH @GMSGFMT@
+GMSGFMT = @GMSGFMT@
 MSGFMT = @MSGFMT@
-XGETTEXT = PATH=../src:$$PATH @XGETTEXT@
-MSGMERGE = PATH=../src:$$PATH msgmerge
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
 
-DEFS = @DEFS@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-
-INCLUDES = -I.. -I$(top_srcdir)/intl
-
-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
-
-SOURCES = cat-id-tbl.c
 POFILES = @POFILES@
 GMOFILES = @GMOFILES@
-DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(PACKAGE).pot \
-stamp-cat-id $(POFILES) $(GMOFILES) $(SOURCES)
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
 
 POTFILES = \
 
 CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-INSTOBJEXT = @INSTOBJEXT@
+
+# Makevars gets inserted here. (Don't remove this line!)
 
 .SUFFIXES:
-.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat
-
-.c.o:
-	$(COMPILE) $<
-
-.po.pox:
-	$(MAKE) $(PACKAGE).pot
-	$(MSGMERGE) $< $(srcdir)/$(PACKAGE).pot -o $*.pox
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
 
 .po.mo:
-	$(MSGFMT) -o $@ $<
+	@echo "$(MSGFMT) -c -o $@ $<"; \
+	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
 
 .po.gmo:
-	file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
-	  && rm -f $$file && $(GMSGFMT) -o $$file $<
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
 
-.po.cat:
-	sed -f ../intl/po2msg.sed < $< > $*.msg \
-	  && rm -f $@ && $(GENCAT) $@ $*.msg
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
 
 
 all: all-@USE_NLS@
 
-all-yes: cat-id-tbl.c $(CATALOGS)
+all-yes: $(CATALOGS)
 all-no:
 
-$(srcdir)/$(PACKAGE).pot: $(POTFILES)
-	$(XGETTEXT) --default-domain=$(PACKAGE) --directory=$(top_srcdir) \
-	  --add-comments --keyword=_ --keyword=N_ \
-	  --files-from=$(srcdir)/POTFILES.in \
-	&& test ! -f $(PACKAGE).po \
-	   || ( rm -f $(srcdir)/$(PACKAGE).pot \
-		&& mv $(PACKAGE).po $(srcdir)/$(PACKAGE).pot )
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
 
-$(srcdir)/cat-id-tbl.c: stamp-cat-id; @:
-$(srcdir)/stamp-cat-id: $(PACKAGE).pot
-	rm -f cat-id-tbl.tmp
-	sed -f ../intl/po2tbl.sed $(srcdir)/$(PACKAGE).pot \
-		| sed -e "s/@PACKAGE NAME@/$(PACKAGE)/" > cat-id-tbl.tmp
-	if cmp -s cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; then \
-	  rm cat-id-tbl.tmp; \
-	else \
-	  echo cat-id-tbl.c changed; \
-	  rm -f $(srcdir)/cat-id-tbl.c; \
-	  mv cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; \
-	fi
-	cd $(srcdir) && rm -f stamp-cat-id && echo timestamp > stamp-cat-id
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
+	  --files-from=$(srcdir)/POTFILES.in \
+	  --copyright-holder='$(COPYRIGHT_HOLDER)'
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
 
 
 install: install-exec install-data
 install-exec:
 install-data: install-data-@USE_NLS@
-install-data-no: all
-install-data-yes: all
-	if test -r "$(MKINSTALLDIRS)"; then \
-	  $(MKINSTALLDIRS) $(DESTDIR)$(datadir); \
-	else \
-	  $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$(datadir); \
-	fi
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  case "$$cat" in \
-	    *.gmo) destdir=$(gnulocaledir);; \
-	    *)     destdir=$(localedir);; \
-	  esac; \
-	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
-	  dir=$$destdir/$$lang/LC_MESSAGES; \
-	  if test -r "$(MKINSTALLDIRS)"; then \
-	    $(MKINSTALLDIRS) $(DESTDIR)$$dir; \
-	  else \
-	    $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$$dir; \
-	  fi; \
-	  if test -r $$cat; then \
-	    $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT); \
-	    echo "installing $$cat as" \
-		 "$(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT)"; \
-	  else \
-	    $(INSTALL_DATA) $(srcdir)/$$cat \
-	      $(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT); \
-	    echo "installing $(srcdir)/$$cat as" \
-		 "$(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT)"; \
-	  fi; \
-	  if test -r $$cat.m; then \
-	    $(INSTALL_DATA) $$cat.m $(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT).m; \
-	    echo "installing $$cat.m as" \
-		  "$(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
-	  else \
-	    if test -r $(srcdir)/$$cat.m ; then \
-	      $(INSTALL_DATA) $(srcdir)/$$cat.m \
-		$(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT).m; \
-	      echo "installing $(srcdir)/$$cat as" \
-		   "$(DESTDIR)$$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
-	    else \
-	      true; \
-	    fi; \
-	  fi; \
-	done
 	if test "$(PACKAGE)" = "gettext"; then \
-	  if test -r "$(MKINSTALLDIRS)"; then \
-	    $(MKINSTALLDIRS) $(DESTDIR)$(gettextsrcdir); \
-	  else \
-	    $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$(gettextsrcdir); \
-	  fi; \
-	  $(INSTALL_DATA) $(srcdir)/Makefile.in.in \
-			  $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
+	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common); do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
 	else \
 	  : ; \
 	fi
+install-data-no: all
+install-data-yes: all
+	$(mkinstalldirs) $(DESTDIR)$(datadir)
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext"; then \
+	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	$(mkinstalldirs) $(DESTDIR)$(datadir)
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
 
 # Define this as empty until I found a useful application.
 installcheck:
 
-uninstall:
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext"; then \
+	  for file in $(DISTFILES.common); do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
 	catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
-	  rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
-	  rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
-	  rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
-	  rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
 	done
-	rm -f $(gettextsrcdir)/po-Makefile.in.in
 
 check: all
 
-cat-id-tbl.o: ../intl/libgettext.h
-
 dvi info tags TAGS ID:
 
 mostlyclean:
-	rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
+	rm -f remove-potcdate.sed
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
 	rm -fr *.o
 
 clean: mostlyclean
 
 distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m
+	rm -f Makefile Makefile.in POTFILES *.mo
 
 maintainer-clean: distclean
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
 	rm -f $(GMOFILES)
 
-distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir: update-po $(DISTFILES)
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	$(MAKE) update-po
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(DISTFILES)
 	dists="$(DISTFILES)"; \
+	if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
 	for file in $$dists; do \
-	  ln $(srcdir)/$$file $(distdir) 2> /dev/null \
-	    || cp -p $(srcdir)/$$file $(distdir); \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir); \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir); \
+	  fi; \
 	done
 
 update-po: Makefile
-	$(MAKE) $(PACKAGE).pot
-	PATH=`pwd`/../src:$$PATH; \
+	$(MAKE) $(DOMAIN).pot-update
+	$(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
 	cd $(srcdir); \
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
-	  mv $$lang.po $$lang.old.po; \
-	  echo "$$lang:"; \
-	  if $(MSGMERGE) $$lang.old.po $(PACKAGE).pot -o $$lang.po; then \
-	    rm -f $$lang.old.po; \
+	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
 	  else \
-	    echo "msgmerge for $$cat failed!"; \
-	    rm -f $$lang.po; \
-	    mv $$lang.old.po $$lang.po; \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
 	  fi; \
-	done
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
 
-POTFILES: POTFILES.in
-	( if test 'x$(srcdir)' != 'x.'; then \
-	    posrcprefix='$(top_srcdir)/'; \
-	  else \
-	    posrcprefix="../"; \
-	  fi; \
-	  rm -f $@-t $@ \
-	    && (sed -e '/^#/d' -e '/^[ 	]*$$/d' \
-		    -e "s@.*@	$$posrcprefix& \\\\@" < $(srcdir)/$@.in \
-		| sed -e '$$s/\\$$//') > $@-t \
-	    && chmod a-w $@-t \
-	    && mv $@-t $@ )
+$(DUMMYPOFILES):
 
-Makefile: Makefile.in.in ../config.status POTFILES
-	cd .. \
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
+	cd $(top_builddir) \
 	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
 	       $(SHELL) ./config.status
 
+force:
+
 # Tell versions [3.59,3.63) of GNU make not to export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

po/Makevars

@@ -0,0 +1,25 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =

po/POTFILES.in

@@ -7,7 +7,9 @@ files.c
 global.c
 move.c
 nano.c
+rcfile.c
 search.c
+utils.c
 winio.c
 
 # Package header files

po/Rules-quot

@@ -0,0 +1,42 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header

po/boldquot.sed

@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“/g
+s/”/”/g
+s/‘/‘/g
+s/’/’/g

po/en@boldquot.header

@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#

po/en@quot.header

@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#

po/insert-header.sin

@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}