Peter Alfredsen 4c612defaf dev-embedded/rpi-eeprom: Bump to 10.3_p1
New firmware for the BETA channel.
My rpi4 is not burning, so I guess it's ok?

Changelog:
2020-11-24 BCM2711 xHC boot support - BETA
   * Add support for booting from the BCM2711 XHCI controller which is the
     USB-C socket on Pi 4B / Pi 400 and the type A sockets on Compute Module 4
     IO board. The controller only supports USB 2.0 and the primary usage is
     for USB-MSD support on CM 4 boards without requiring a PCIe XHCI controller.

     To use this add '5' to the BOOT_ORDER in the EEPROM config for BCM_USB_MSD boot.

     This requires the latest rpi-update firmware.

     If start.elf is loaded via the BCM2711 XHCI (BOOT_ORDER 5) then the config.txt
     otg_mode setting will be set to 1 so that the OS can continue booting
     using the BCM2711 XHCI. This means that the device/gadget mode is not available
     when booted in this mode and there is no support for switching back to
     the DWC2 controller from the BCM2711 XHCI controller.

   * Update halt behavior on Pi 400 to re-enable 'power on' button if the OS
     did a reset rather than using the standard mailbox shutdown commands. This
     overrides WAKE_ON_GPIO / POWER_OFF_ON_HALT settings on Pi 400 because
     it has a dedicated power button.
     If a button on GPIO3 really is requried then it can be re-enabled by setting
     WAKE_ON_GPIO=2 but that will consume more power.
   * Fix short blink before one-shot error pattern - #251
   * Validate SDRAM in recovery mode.
   * XHCI protocol layer fixes for non-VLI controllers.
   * Updated 'tryboot' for new version which also supports Pi3 and earlier.

Closes: https://bugs.gentoo.org/758263
Package-Manager: Portage-3.0.11, Repoman-3.0.2
Signed-off-by: Peter Alfredsen <crabbedhaloablution@icloud.com>
Closes: https://github.com/gentoo/gentoo/pull/18488
Signed-off-by: Sam James <sam@gentoo.org>
2020-12-15 03:04:58 +00:00
2020-12-04 12:36:45 +03:00
2020-11-22 09:54:53 +01:00
2020-12-14 22:42:40 +01:00
2020-12-13 21:50:49 +09:00
2020-12-14 21:36:44 -05:00
2020-12-04 14:25:07 -05:00
2020-12-14 21:17:15 -05:00
2020-12-14 21:17:15 -05:00
2020-11-22 15:43:01 +01:00
2020-12-03 11:28:01 +00:00
2020-12-02 15:08:54 +03:00
2020-12-02 23:21:41 +00:00
2020-11-29 10:55:42 +01:00
2020-12-14 21:50:57 +00:00
2020-11-28 11:44:48 -05:00
2020-12-02 23:21:37 +00:00
2020-12-13 18:15:42 +03:00
2020-12-14 13:29:09 -05:00
2020-12-14 21:17:15 -05:00
S
Description
No description provided
9.8 GiB
Languages
Shell 98%
Roff 1.4%
Emacs Lisp 0.2%
C 0.1%