gentoo-mirror/gentoo
1
0
Fork 0
mirror of https://github.com/gentoo-mirror/gentoo.git synced 2026-08-06 00:48:18 -07:00
Code Issues Projects Releases Wiki Activity

sys-boot/raspberrypi-firmware: remove unused files

Browse Source 
Package-Manager: Portage-3.0.12, Repoman-3.0.2
Signed-off-by: Michael Mair-Keimberger <m.mairkeimberger@gmail.com>
Closes: https://github.com/gentoo/gentoo/pull/18747
Signed-off-by: Sam James <sam@gentoo.org>
This commit is contained in:
Michael Mair-Keimberger
2020-12-21 17:08:19 +01:00
committed by Sam James
parent 0765ec6ec5
commit d2ab72aa2a
2 changed files with 0 additions and 82 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt
View File

@@ -1 +0,0 @@
ipv6.disable=0 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=noop rootwait

81
sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt
View File

@@ -1,81 +0,0 @@
#from archlinux arm sdcard image
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# for more options see http://elinux.org/RPi_config.txt
## Some over clocking settings, govenor already set to ondemand
##None
#arm_freq=700
#core_freq=250
#sdram_freq=400
#over_voltage=0
##Modest
#arm_freq=800
#core_freq=300
#sdram_freq=400
#over_voltage=0
##Medium
#arm_freq=900
#core_freq=333
#sdram_freq=450
#over_voltage=2
##High
#arm_freq=950
#core_freq=450
#sdram_freq=450
#over_voltage=6
##Turbo
#arm_freq=1000
#core_freq=500
#sdram_freq=500
#over_voltage=6
gpu_mem_512=316
gpu_mem_256=128
cma_lwm=16
cma_hwm=32
cma_offline_start=16