net-misc/kea: Remove unused kea-ctrl-agent

In addition to removal of kea-ctrl-agent conf and init, tidy up
some comments, use lowercase for variables and other minor
corrections.

Bug: https://bugs.gentoo.org/979728
Signed-off-by: Peter Leese <inbox@peterleese.org>
Part-of: https://codeberg.org/gentoo/gentoo/pulls/1567
Merges: https://codeberg.org/gentoo/gentoo/pulls/1567
Signed-off-by: Sam James <sam@gentoo.org>

net-misc/kea/files/kea-confd-r4

@@ -0,0 +1,7 @@
+# KEA_SVC must be defined here!
+# Available values: dhcp4 dhcp6 dhcp-ddns
+KEA_SVC="@KEA_SVC@"
+
+#KEA_USER=dhcp
+#KEA_GROUP=dhcp
+#KEA_CONFIG=/etc/kea/kea-@KEA_SVC@.conf

net-misc/kea/files/kea-initd-r5

@@ -0,0 +1,78 @@
+#!/sbin/openrc-run
+# Copyright 2025-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+: ${KEA_USER:=dhcp}
+: ${KEA_GROUP:=dhcp}
+: ${KEA_CONFIG:=/etc/kea/${RC_SVCNAME}.conf}
+
+description="kea ${KEA_SVC} services"
+command="/usr/sbin/kea-${KEA_SVC}"
+command_args="-c ${KEA_CONFIG}"
+command_user="${KEA_USER}:${KEA_GROUP}"
+pidfile="/run/kea/$(basename ${KEA_CONFIG%.*}).kea-${KEA_SVC}.pid"
+required_files="${KEA_CONFIG}"
+start_stop_daemon_args="--background"
+
+extra_commands="check_kea_svc checkconfig"
+extra_started_commands="reload"
+
+check_kea_svc() {
+	if [ "${RC_SVCNAME}" = "kea" ]; then
+		eerror "You are not supposed to run this script directly."
+		eerror "Create a symlink for the kea service you want to run."
+		eerror "Symlinks should have been created during installation."
+		return 1
+	fi
+
+	case "${KEA_SVC}" in
+	dhcp4)
+	    capabilities="^cap_net_bind_service,^cap_net_raw"
+	    ;;
+	dhcp6|dhcp-ddns)
+	    capabilities="^cap_net_bind_service"
+	    ;;
+	*)
+	    eerror "KEA_SVC is undefined or invalid!"
+	    eerror "It should be defined in /etc/conf.d/${RC_SVCNAME}"
+	    return 1
+	    ;;
+	esac
+}
+
+checkconfig() {
+	${command} -t ${KEA_CONFIG} 1>/dev/null || return 1
+}
+
+reload() {
+	checkconfig || return 1
+	ebegin "Reloading ${RC_SVCNAME}"
+	start-stop-daemon --signal HUP --pidfile ${pidfile}
+	eend $?
+}
+
+start_pre() {
+	check_kea_svc || return 1
+
+	if [ $(stat -c "%U:%G" ${KEA_CONFIG}) != "root:${KEA_GROUP}" ] ; then
+		eerror "${KEA_CONFIG} config file is not owned by root:${KEA_GROUP}"
+		eerror "you should reset the ownership:"
+		eerror "chown root:${KEA_GROUP} ${KEA_CONFIG}"
+		return 1
+	fi
+
+	if [ "${RC_CMD}" != "restart" ]; then
+		checkconfig || return 1
+	fi
+}
+
+start_post() {
+	# Kea creates the pidfile only after it has started successfully.
+	ewaitfile "${STARTUP_TIMEOUT:-1}" "${pidfile}"
+}
+
+stop_pre() {
+	if [ "${RC_CMD}" = "restart" ]; then
+		checkconfig || return 1
+	fi
+}

net-misc/kea/kea-3.2.0-r1.ebuild

@@ -0,0 +1,335 @@
+# Copyright 1999-2026 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{11..15} )
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/isc.asc
+inherit eapi9-ver flag-o-matic meson python-r1 systemd tmpfiles
+inherit toolchain-funcs verify-sig
+
+DESCRIPTION="High-performance production grade DHCPv4 & DHCPv6 server"
+HOMEPAGE="https://www.isc.org/kea/"
+
+if [[ ${PV} == 9999 ]]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://gitlab.isc.org/isc-projects/kea.git"
+else
+	SRC_URI="
+		https://downloads.isc.org/isc/kea/${PV}/${P}.tar.xz
+		!doc? ( https://codeberg.org/peter1010/kea-manpages/archive/kea-manpages-${PV}.tar.gz )
+		verify-sig? ( https://downloads.isc.org/isc/kea/${PV}/${P}.tar.xz.asc )
+	"
+	KEYWORDS="~amd64 ~arm ~arm64 ~x86"
+fi
+
+LICENSE="MPL-2.0"
+SLOT="0"
+IUSE="debug doc kerberos mysql +openssl postgres selinux shell test"
+
+REQUIRED_USE="shell? ( ${PYTHON_REQUIRED_USE} )"
+RESTRICT="!test? ( test )"
+
+COMMON_DEPEND="
+	>=dev-libs/boost-1.66:=
+	dev-libs/log4cplus:=
+	kerberos? ( virtual/krb5 )
+	mysql? (
+		app-arch/zstd:=
+		dev-db/mysql-connector-c:=
+		dev-libs/openssl:=
+		virtual/zlib:=
+	)
+	!openssl? ( dev-libs/botan:3=[boost] )
+	openssl? ( dev-libs/openssl:0= )
+	postgres? ( dev-db/postgresql:* )
+	shell? ( ${PYTHON_DEPS} )
+"
+DEPEND="${COMMON_DEPEND}
+	test? ( dev-cpp/gtest )
+"
+RDEPEND="${COMMON_DEPEND}
+	acct-group/dhcp
+	acct-user/dhcp
+	selinux? ( sec-policy/selinux-dhcp )
+"
+BDEPEND="
+	${PYTHON_DEPS}
+	>=dev-build/meson-1.8
+	virtual/pkgconfig
+	doc? (
+		$(python_gen_any_dep '
+			dev-python/sphinx[${PYTHON_USEDEP}]
+			dev-python/sphinx-rtd-theme[${PYTHON_USEDEP}]
+		')
+	)
+	verify-sig? ( sec-keys/openpgp-keys-isc )
+"
+
+python_check_deps() {
+	use doc || return 0
+	python_has_version "dev-python/sphinx[${PYTHON_USEDEP}]" \
+		"dev-python/sphinx-rtd-theme[${PYTHON_USEDEP}]"
+}
+
+pkg_setup() {
+	[[ ${MERGE_TYPE} != binary ]] && python_setup
+}
+
+src_unpack() {
+	if [[ ${PV} == 9999 ]]; then
+		git-r3_src_unpack
+		return
+	fi
+
+	if use verify-sig; then
+		verify-sig_verify_detached "${DISTDIR}"/${P}.tar.xz{,.asc}
+	fi
+
+	default
+}
+
+src_prepare() {
+	default
+
+	# Fix up all doc paths, whether or not we are installing full set of docs
+	sed -e "s:'doc/kea':'doc/${PF}':" \
+		-i meson.build || die
+	sed -e "s:'share/doc/kea':'share/doc/${PF}':" \
+		-i doc/meson.build || die
+	sed -e "s:'doc/kea':'doc/${PF}':" \
+		-i doc/sphinx/meson.build || die
+	sed -e "s:share/doc/kea/:share/doc/${PF}/:" \
+		-i doc/sphinx/arm/install.rst || die
+	sed -e "s:share/doc/kea/examples:share/doc/${PF}/examples:" \
+		-i doc/sphinx/arm/config.rst || die
+
+	# set shebang before meson whether or not we are installing the shell
+	sed -e 's:^#!@PYTHON@:#!/usr/bin/env python3:' \
+		-i src/bin/shell/kea-shell.in || die
+
+	# Don't allow meson to install shell, we shall do that if required
+	sed -e 's:install\: true:install\: false:' \
+		-i src/bin/shell/meson.build || die
+
+	# do not create /run
+	sed -e '/^install_emptydir(RUNSTATEDIR/d' \
+		-i meson.build || die
+}
+
+src_configure() {
+	# https://bugs.gentoo.org/861617
+	# https://gitlab.isc.org/isc-projects/kea/-/issues/3946
+	#
+	# Upstream does not support LTO
+	filter-lto
+
+	if use !openssl; then
+		append-cxxflags -std=c++20
+	fi
+
+	# Note: https://gitlab.isc.org/isc-projects/kea/-/issues/4171 suggests patching meson.build to set umask,
+	# instead here we pass install-umask as an argument to do the same thing, i.e. control permissions on
+	# installed files.
+	local emesonargs=(
+		--localstatedir="${EPREFIX}/var"
+		-Drunstatedir="${EPREFIX}/run"
+		$(meson_feature kerberos krb5)
+		-Dnetconf=disabled
+		-Dcrypto=$(usex openssl openssl botan)
+		$(meson_feature mysql)
+		$(meson_feature postgres postgresql)
+		$(meson_feature test tests)
+		--install-umask=0o023
+	)
+	if use debug; then
+		emesonargs+=(
+			--debug
+		)
+	fi
+	meson_src_configure
+}
+
+src_compile() {
+	meson_src_compile
+
+	use doc && meson_src_compile doc
+}
+
+src_test() {
+	# Get list of all test suites into an associative array
+	# the meson test --list returns either "kea / test_suite", "kea:shell-tests / test_suite" or
+	# "kea:python-tests / test_suite"
+	# Note: In meson >= 1.10 the format has changed to
+	# the meson test --list returns either "kea:test_suite", "shell-tests - kea:test_suite" or
+	# "python-tests - kea:test_suite"
+	#
+	# Discard the shell tests as we can't run shell tests in sandbox
+
+	pushd "${BUILD_DIR}" || die
+
+	local -A test_suites
+	local -a words
+	while IFS="/: " read -ra words ; do
+		if [[ "${words[0]}" != "shell-tests" ]] && [[ "${words[2]}" != "shell-tests" ]]; then
+			test_suites["${words[-1]}"]=1
+		fi
+	done < <(meson test --list || die)
+	popd || die
+
+	# Some other tests will fail for interface access restrictions, we have to remove the test suites those tests
+	# belong to
+	local -a skip_tests=(
+		dhcp-radius-tests
+		kea-log-buffer_logger_test.sh
+		kea-log-console_test.sh
+		dhcp-lease-query-tests
+		kea-dhcp6-tests
+		kea-dhcp4-tests
+		kea-dhcp-tests
+	)
+
+	# skip shell tests that require a running instance of MySQL
+	if use mysql; then
+		skip_tests+=(
+			kea-mysql-tests
+			dhcp-mysql-lib-tests
+			dhcp-forensic-log-libload-tests
+		)
+	fi
+
+	# skip shell tests that require a running instance of PgSQL
+	if use postgres; then
+		skip_tests+=(
+			kea-pgsql-tests
+			dhcp-pgsql-lib-tests
+			dhcp-forensic-log-libload-tests
+		)
+	fi
+
+	if use kerberos; then
+		skip_tests+=(
+			ddns-gss-tsig-tests
+		)
+	fi
+
+	if [[ $(tc-get-ptr-size) -eq 4 ]]; then
+		# see https://bugs.gentoo.org/958171 for reason for skipping these tests
+		skip_tests+=(
+			kea-util-tests
+			kea-dhcpsrv-tests
+			dhcp-ha-lib-tests
+			kea-d2-tests
+		)
+	fi
+
+	local name
+	for name in ${skip_tests[@]}; do
+		unset -v 'test_suites[${name}]'
+	done
+
+	meson_src_test "${!test_suites[@]}"
+}
+
+install_shell() {
+	local orig_build_dir=$1
+	python_domodule "${orig_build_dir}"/src/bin/shell/*.py
+	python_doscript "${orig_build_dir}"/src/bin/shell/kea-shell
+
+	# fix path to import kea modules
+	sed -e "/^sys.path.append/s|(.*)|('$(python_get_sitedir)/${PN}')|"	\
+		-i "${ED}"/usr/lib/python-exec/${EPYTHON}/kea-shell || die
+}
+
+src_install() {
+	meson_install
+
+	# Remove unused database files
+	if use !mysql; then
+		rm -r "${ED}"/usr/share/kea/scripts/mysql || die
+	fi
+	if use !postgres; then
+		rm -r "${ED}"/usr/share/kea/scripts/pgsql || die
+	fi
+
+	# No easy way to control how meson_install sets permissions in meson < 1.9
+	# So make sure permissions are same as in previous versions of kea
+	# To avoid any differences between an update vers first time install
+	fperms -R 0755 /usr/sbin
+	fperms -R 0755 /usr/bin
+	fperms -R 0755 /usr/$(get_libdir)
+
+	if use shell; then
+		python_moduleinto ${PN}
+		python_foreach_impl install_shell "${BUILD_DIR}"
+	fi
+
+	# We don't use keactrl.conf so move to reduce confusion
+	mv "${ED}"/etc/${PN}/keactrl.conf "${ED}"/usr/share/doc/${PF}/examples/keactrl.conf || die
+
+	fowners -R root:dhcp /etc/${PN}
+
+	# A side effect of using install_umask 023 in meson setup is setting config files to be world readable
+	# lets not do that
+	fperms -R 0750 /etc/${PN}
+	chmod 0640 "${ED}"/etc/${PN}/*.conf || die
+
+	# Install a conf per service and a linked init script per service
+	newinitd "${FILESDIR}"/${PN}-initd-r5 ${PN}
+	local svc
+	for svc in dhcp4 dhcp6 dhcp-ddns; do
+		newconfd "${FILESDIR}"/${PN}-confd-r4 kea-${svc}
+		sed -e "s:@KEA_SVC@:${svc}:g" \
+			-i "${ED}"/etc/conf.d/kea-${svc} || die
+		dosym kea "${EPREFIX}"/etc/init.d/kea-${svc}
+	done
+
+	if use !doc; then
+		doman "${WORKDIR}"/kea-manpages/man/*
+	fi
+
+	systemd_newunit "${FILESDIR}"/${PN}-dhcp-ddns.service-r2 ${PN}-dhcp-ddns.service
+	systemd_newunit "${FILESDIR}"/${PN}-dhcp4.service-r2 ${PN}-dhcp4.service
+	systemd_newunit "${FILESDIR}"/${PN}-dhcp6.service-r2 ${PN}-dhcp6.service
+
+	newtmpfiles "${FILESDIR}"/${PN}.tmpfiles.conf ${PN}.conf
+
+	keepdir /var/lib/${PN} /var/log/${PN}
+	fowners -R dhcp:dhcp /var/lib/${PN} /var/log/${PN}
+	fperms 750 /var/lib/${PN} /var/log/${PN}
+}
+
+pkg_postinst() {
+	tmpfiles_process ${PN}.conf
+
+	if ver_replacing -lt 2.6; then
+		ewarn "Several changes have been made for daemons:"
+		ewarn "  To comply with common practices for this package,"
+		ewarn "  config paths by default has been changed as below:"
+		ewarn "    /etc/kea/kea-dhcp4.conf"
+		ewarn "    /etc/kea/kea-dhcp6.conf"
+		ewarn "    /etc/kea/kea-dhcp-ddns.conf"
+		ewarn
+		ewarn "  Daemons are launched by default with the unprivileged user 'dhcp'"
+		ewarn
+		ewarn "Please check your configuration!"
+	fi
+
+	if ver_replacing -lt 3.0; then
+		ewarn "Make sure that ${EPREFIX}/var/lib/kea and all the files in it are owned by dhcp:"
+		ewarn "chown -R dhcp:dhcp ${EPREFIX}/var/lib/kea"
+		ewarn
+		ewarn "If using openrc;"
+		ewarn "  There are now separate conf.d scripts and associated init.d per daemon!"
+		ewarn "    Each Daemon needs to be launched separately, i.e. the daemons are"
+		ewarn "      kea-dhcp4"
+		ewarn "      kea-dhcp6"
+		ewarn "      kea-dhcp-ddns"
+		ewarn "Please adjust your service startups appropriately"
+	fi
+
+	if ! has_version net-misc/kea; then
+		elog "See examples of config files in:"
+		elog "  ${EROOT}/usr/share/doc/${PF}/examples"
+	fi
+}

net-misc/kea/kea-9999.ebuild

@@ -5,7 +5,7 @@ EAPI=8
 
 PYTHON_COMPAT=( python3_{11..15} )
 VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/isc.asc
-inherit eapi9-ver flag-o-matic meson python-r1 systemd tmpfiles
+inherit flag-o-matic meson python-r1 systemd tmpfiles
 inherit toolchain-funcs verify-sig
 
 DESCRIPTION="High-performance production grade DHCPv4 & DHCPv6 server"
@@ -66,7 +66,7 @@ BDEPEND="
 "
 
 python_check_deps() {
-	use doc || return 0;
+	use doc || return 0
 	python_has_version "dev-python/sphinx[${PYTHON_USEDEP}]" \
 		"dev-python/sphinx-rtd-theme[${PYTHON_USEDEP}]"
 }
@@ -76,7 +76,7 @@ pkg_setup() {
 }
 
 src_unpack() {
-	if [[ ${PV} == 9999 ]] ; then
+	if [[ ${PV} == 9999 ]]; then
 		git-r3_src_unpack
 		return
 	fi
@@ -112,7 +112,7 @@ src_prepare() {
 		-i src/bin/shell/meson.build || die
 
 	# do not create /run
-	sed -e '/^install_emptydir(RUNSTATEDIR)$/d' \
+	sed -e '/^install_emptydir(RUNSTATEDIR/d' \
 		-i meson.build || die
 }
 
@@ -120,7 +120,7 @@ src_configure() {
 	# https://bugs.gentoo.org/861617
 	# https://gitlab.isc.org/isc-projects/kea/-/issues/3946
 	#
-	# Kea Devs say no to LTO
+	# Upstream does not support LTO
 	filter-lto
 
 	if use !openssl; then
@@ -152,8 +152,6 @@ src_configure() {
 src_compile() {
 	meson_src_compile
 
-	# Note: If you want man pages doc use has to be set. This may change
-	# in the future and be like 2.6.3 where man pages were part of the release tarball
 	use doc && meson_src_compile doc
 }
 
@@ -168,18 +166,19 @@ src_test() {
 	# Discard the shell tests as we can't run shell tests in sandbox
 
 	pushd "${BUILD_DIR}" || die
-	local -A TEST_SUITES
 
-	while IFS="/: " read -a words ; do
+	local -A test_suites
+	local -a words
+	while IFS="/: " read -ra words ; do
 		if [[ "${words[0]}" != "shell-tests" ]] && [[ "${words[2]}" != "shell-tests" ]]; then
-			TEST_SUITES["${words[-1]}"]=1
+			test_suites["${words[-1]}"]=1
 		fi
 	done < <(meson test --list || die)
-	popd
+	popd || die
 
 	# Some other tests will fail for interface access restrictions, we have to remove the test suites those tests
 	# belong to
-	local SKIP_TESTS=(
+	local -a skip_tests=(
 		dhcp-radius-tests
 		kea-log-buffer_logger_test.sh
 		kea-log-console_test.sh
@@ -191,31 +190,31 @@ src_test() {
 
 	# skip shell tests that require a running instance of MySQL
 	if use mysql; then
-		SKIP_TESTS+=(
+		skip_tests+=(
 			kea-mysql-tests
 			dhcp-mysql-lib-tests
-			dhcp-forensic-log-libloadtests
+			dhcp-forensic-log-libload-tests
 		)
 	fi
 
 	# skip shell tests that require a running instance of PgSQL
 	if use postgres; then
-		SKIP_TESTS+=(
+		skip_tests+=(
 			kea-pgsql-tests
 			dhcp-pgsql-lib-tests
-			dhcp-forensic-log-libloadtests
+			dhcp-forensic-log-libload-tests
 		)
 	fi
 
 	if use kerberos; then
-		SKIP_TESTS+=(
+		skip_tests+=(
 			ddns-gss-tsig-tests
 		)
 	fi
 
 	if [[ $(tc-get-ptr-size) -eq 4 ]]; then
 		# see https://bugs.gentoo.org/958171 for reason for skipping these tests
-		SKIP_TESTS+=(
+		skip_tests+=(
 			kea-util-tests
 			kea-dhcpsrv-tests
 			dhcp-ha-lib-tests
@@ -223,16 +222,18 @@ src_test() {
 		)
 	fi
 
-	for SKIP in ${SKIP_TESTS[@]}; do
-		unset TEST_SUITES["${SKIP}"]
+	local name
+	for name in ${skip_tests[@]}; do
+		unset -v 'test_suites[${name}]'
 	done
 
-	meson_src_test ${!TEST_SUITES[@]}
+	meson_src_test "${!test_suites[@]}"
 }
 
 install_shell() {
-	python_domodule ${ORIG_BUILD_DIR}/src/bin/shell/*.py
-	python_doscript ${ORIG_BUILD_DIR}/src/bin/shell/kea-shell
+	local orig_build_dir=$1
+	python_domodule "${orig_build_dir}"/src/bin/shell/*.py
+	python_doscript "${orig_build_dir}"/src/bin/shell/kea-shell
 
 	# fix path to import kea modules
 	sed -e "/^sys.path.append/s|(.*)|('$(python_get_sitedir)/${PN}')|"	\
@@ -242,7 +243,7 @@ install_shell() {
 src_install() {
 	meson_install
 
-	# Tidy up
+	# Remove build metadata and unused database files
 	rm -r "${ED}"/usr/share/kea/meson-info || die
 	if use !mysql; then
 		rm -r "${ED}"/usr/share/kea/scripts/mysql || die
@@ -260,7 +261,7 @@ src_install() {
 
 	if use shell; then
 		python_moduleinto ${PN}
-		ORIG_BUILD_DIR=${BUILD_DIR} python_foreach_impl install_shell
+		python_foreach_impl install_shell "${BUILD_DIR}"
 	fi
 
 	# We don't use keactrl.conf so move to reduce confusion
@@ -274,16 +275,16 @@ src_install() {
 	chmod 0640 "${ED}"/etc/${PN}/*.conf || die
 
 	# Install a conf per service and a linked init script per service
-	newinitd "${FILESDIR}"/${PN}-initd-r4 ${PN}
+	newinitd "${FILESDIR}"/${PN}-initd-r5 ${PN}
+
 	local svc
-	for svc in dhcp4 dhcp6 dhcp-ddns ctrl-agent; do
-		newconfd "${FILESDIR}"/${PN}-confd-r3 kea-${svc}
+	for svc in dhcp4 dhcp6 dhcp-ddns; do
+		newconfd "${FILESDIR}"/${PN}-confd-r4 kea-${svc}
 		sed -e "s:@KEA_SVC@:${svc}:g" \
 			-i "${ED}"/etc/conf.d/kea-${svc} || die
 		dosym kea "${EPREFIX}"/etc/init.d/kea-${svc}
 	done
 
-	systemd_newunit "${FILESDIR}"/${PN}-ctrl-agent.service-r2 ${PN}-ctrl-agent.service
 	systemd_newunit "${FILESDIR}"/${PN}-dhcp-ddns.service-r2 ${PN}-dhcp-ddns.service
 	systemd_newunit "${FILESDIR}"/${PN}-dhcp4.service-r2 ${PN}-dhcp4.service
 	systemd_newunit "${FILESDIR}"/${PN}-dhcp6.service-r2 ${PN}-dhcp6.service
@@ -298,34 +299,6 @@ src_install() {
 pkg_postinst() {
 	tmpfiles_process ${PN}.conf
 
-	if ver_replacing -lt 2.6; then
-		ewarn "Several changes have been made for daemons:"
-		ewarn "  To comply with common practices for this package,"
-		ewarn "  config paths by default has been changed as below:"
-		ewarn "    /etc/kea/kea-dhcp4.conf"
-		ewarn "    /etc/kea/kea-dhcp6.conf"
-		ewarn "    /etc/kea/kea-dhcp-ddns.conf"
-		ewarn "    /etc/kea/kea-ctrl-agent.conf"
-		ewarn
-		ewarn "  Daemons are launched by default with the unprivileged user 'dhcp'"
-		ewarn
-		ewarn "Please check your configuration!"
-	fi
-
-	if ver_replacing -lt 3.0; then
-		ewarn "Make sure that ${EPREFIX}/var/lib/kea and all the files in it are owned by dhcp:"
-		ewarn "chown -R dhcp:dhcp ${EPREFIX}/var/lib/kea"
-		ewarn
-		ewarn "If using openrc;"
-		ewarn "  There are now separate conf.d scripts and associated init.d per daemon!"
-		ewarn "    Each Daemon needs to be launched separately, i.e. the daemons are"
-		ewarn "      kea-dhcp4"
-		ewarn "      kea-dhcp6"
-		ewarn "      kea-dhcp-ddns"
-		ewarn "      kea-ctrl"
-		ewarn "Please adjust your service startups appropriately"
-	fi
-
 	if ! has_version net-misc/kea; then
 		elog "See examples of config files in:"
 		elog "  ${EROOT}/usr/share/doc/${PF}/examples"